Create Collection  with a defined layout (thumbnail)- KM API

Hi, I have developed a code that create a folder (collection) in KM using de the API. But I have the problem, that the folder have to be set with thumbnail layout. Have anyone any idea of how to do that?. Thanks

Hi Martin,
    I wrote this code to set a layout set in a folder:
configurarLayout receive as parameter a folder an a user. The idea is for this user and folder set a layout set profile "Managers_NewsBrowser_Profile".
Don't forget to create this profile, for it you only need to configure from portal.
private void configurarLayout(ICollection articulos, IUser user) throws WcmException {
        IUriMapperService pepe = null;
        ILayoutService layoutService;
        layoutService = (ILayoutService) ResourceFactory.getInstance().getServiceFactory().getRepositoryService(articulos, IWcmConst.LAYOUT_SERVICE);
        pepe = UriMapperServiceFactory.getInstance();
        String user1 = pepe.getConstantID(articulos.getRID());
        ILayoutContext context = layoutService.getContextForUser(user, user1);
        logger.errorT("UserID " + context.getCommonContext().getUserID());
        IProfileIterator iProfileIterator = layoutService.getProfiles().iterator();
        IProfile profilePosta = null;
        while (iProfileIterator.hasNext() && profilePosta == null) {
            IProfile element = iProfileIterator.next();
            if (element.getName().equalsIgnoreCase("Managers_NewsBrowser_Profile")) {
                profilePosta = element;
        boolean resultado = false;
        resultado = layoutService.saveProfile(articulos, profilePosta, context.getCommonContext());
        if (resultado = false)
            logger.errorT("Grabacion erronea");
Patricio.

Similar Messages

  • How to create Matrix with Group report layout in xml

    Hi,
    i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
    Here i am attaching the required design doc
    below is the code
    select COST_CMPNTCLS_CODE,
    -- crd.RESOURCES,
    NOMINAL_COST,
    cmm.COST_MTHD_CODE,
    -- crd.COST_TYPE_ID,
    gps.period_code
    -- ORGANIZATION_ID
    from CM_RSRC_DTL crd,
    gmf_period_statuses gps,
    CM_MTHD_MST cmm,
    CR_RSRC_MST crm,
    CM_CMPT_MST ccm
    where gps.period_id = crd.PERIOD_ID
    and crd.cost_type_id = cmm.cost_type_id
    and crd.RESOURCES = crm.RESOURCES
    and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
    and gps.period_code in (:p_period1, :p_period2, :p_period3)
    group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
    order by 1,2,3,4.
    The o/p of the report shoud be as given below
              Period-1     Period-2     Period-3     Period-4
    COMPONENT                         
    LABOUR - DIRECT                         
         Actual     1     2     3     4
         Actual Rate     10     10     10     10
         Standard Rate                    
         Var%                    
    DEPRICIATION-DIRECT                         
         Actual                    
         Actual Rate                    
         Standard Rate                    
         Var%                    
    OVERHEAD - DIRECT                         
         Actual                    
         Actual Rate                    
         Standard Rate                    
         Var%                    
    LABOUR - IN DIRECT                         
         Actual                    
         Actual Rate                    
         Standard Rate                    
         Var%                    
    Thanks in advance

    Your friend is obviously not a reliable source of HTML
    information.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Mr.Ghost" <[email protected]> wrote in
    message
    news:f060vi$npp$[email protected]..
    > One of my friends advised me to develop my whole site on
    the layout mode
    > as its
    > better than the standard as he says
    > but I couldnot make an ordinary table with rows and
    columns in th layout
    > mode
    > is there any one who can tell me how to?
    > thanx alot
    >

  • How to creat javadoc with userdefine methods

    hi
    how to creat javadocs with user define class && methods ....
    we did like that
    javadocs filename..
    we are not geting my oun methods..
    pls help me
    regards
    kedar

    Hi,
    javadoc creates documentation for packages, not for single files - and you have to comment out every class, method, fields in a special form using javadoc tags - an example
    package MyPackage;
    import java.util.Vector;
    * This class is only an example, how to create javadocs for a package.
    public class MyClass extends Object {
    * an example for a public field holding a Vector
    public Vector aVector = new Vector(3,3);
    * Constructs a MyClass instance.
    public MyClass() { super(); }
    * Constructs a MyClass instance using the passed Vector in the {@link aVector} field.
    * @param vec a Vector, that replaces the Vector in field {@link aVector}
    public MyClass(Vector vec) { super(); aVector = vec; }
    * gets the Vector in field {@link aVector}.
    * @return a Vector, held in field {@link aVector}
    public Vector getVector() { return aVector; }
    }// end of classNow you can create your javadoc from the classpath with "javadoc MyPackage"
    hope, this helps
    greetings Marsian

  • Issue with xsd Data type mapping for collection of user defined data type

    Hi,
    I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
    Here is the code snippet.
    sample.java
    @WebMethod
    public QueryPageOutput AccountQue(QueryPageInput qpInput)
    public class QueryPageInput implements Serializable, Cloneable
    protected Account_IO fMessage = null;
    public class QueryPageOutput implements Serializable, Cloneable
    protected Account_IO fMessage = null;
    public class Account_IO implements Serializable, Cloneable {
    protected ArrayList <AccountIC> fintObjInst = null;
    public ArrayList<AccountIC>getfintObjInst()
    return (ArrayList<AccountIC>)fintObjInst.clone();
    public void setfintObjInst(AccountIC val)
    fintObjInst = new ArrayList<AccountIC>();
    fintObjInst.add(val);
    Public class AccountIC
    protected String Name;
    protected String Desc;
    public String getName()
    return Name;
    public void setName(String name)
    Name = name;
    For the sample.java code, the wsdl generated is as below:
    <?xml version="1.0" encoding="UTF-8" ?>
    <wsdl:definitions
    name="SimpleService"
    targetNamespace="http://example.org"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:tns="http://example.org"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
    >
    <wsdl:types>
    <xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
    xmlns:xs="http://www.w3.org/2001/XMLSchema">
    <xs:import namespace="http://example.org/types"/>
    <xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
    </xs:schema>
    <xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
    xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
    <xs:import namespace="http://examples.org"/>
    <xs:complexType name="queryPageOutput">
    <xs:sequence>
    <xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
    </xs:sequence>
    </xs:complexType>
    <xs:complexType name="accountEMRIO">
    <xs:sequence>
    <xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
    <xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
    <xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
    <xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
    <xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
    <xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    </xs:complexType>
    <xs:complexType name="queryPageInput">
    <xs:sequence>
    <xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
    <xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
    <xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
    <xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
    </xs:sequence>
    </xs:complexType>
    </xs:schema>
    <schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
    <import namespace="http://example.org/types"/>
    <xsd:complexType name="AccountQue">
    <xsd:sequence>
    <xsd:element name="arg0" type="ns1:queryPageInput"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:element name="AccountQue" type="tns:AccountQue"/>
    <xsd:complexType name="AccountQueResponse">
    <xsd:sequence>
    <xsd:element name="return" type="ns1:queryPageOutput"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
    </schema>
    </wsdl:types>
    <wsdl:message name="AccountQueInput">
    <wsdl:part name="parameters" element="tns:AccountQue"/>
    </wsdl:message>
    <wsdl:message name="AccountQueOutput">
    <wsdl:part name="parameters" element="tns:AccountQueResponse"/>
    </wsdl:message>
    <wsdl:portType name="SimpleService">
    <wsdl:operation name="AccountQue">
    <wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
    ns1:Action=""/>
    <wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
    ns1:Action=""/>
    </wsdl:operation>
    </wsdl:portType>
    <wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <wsdl:operation name="AccountQue">
    <soap:operation soapAction=""/>
    <wsdl:input>
    <soap:body use="literal"/>
    </wsdl:input>
    <wsdl:output>
    <soap:body use="literal"/>
    </wsdl:output>
    </wsdl:operation>
    </wsdl:binding>
    <wsdl:service name="SimpleService">
    <wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
    <soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
    </wsdl:port>
    </wsdl:service>
    </wsdl:definitions>
    In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
    Can some one help me with this.
    Thanks,
    Sudha.

    Did you try adding the the XmlSeeAlso annotation to the webservice
    @XmlSeeAlso({<package.name>.AccountIC.class})
    This will add the schema for the data type (AccountIC) to the WSDL.
    Hope this helps.
    -Ajay

  • Create a site collection with dedicated content db with the help of server object model

    Hi,
     I have a requirement to implement a create a new site collection with dedicated content db. i have got 2 PowerShell scripts which does the same. first i will  create a content  db and then create the sitecollection with contentdb
    parameter with the created contentdb name.
    Now the site collection created must contain few doc libs and few splists with look up columns, people picker data type, multiline of text, single line of text,choice field. hence i am thinking the below approach:
     1) create a web template and include sp doclibs, splists , site columns in this.
     2) i am thinking of a ui design to create the below:
     These are called "projects" which is actually the site collection with the doclibs, splists and must be created by sharepoint admin on click of a link in my landing page.end users access these "projects"  aka 
    "site collections" and uploads the documents into these projects and collaborate.
    so my question is :  On click of a button can I create a site collection with a dedicated content db based on the web template created with the  hel of  server  object model?
    The other approach is on click of this button call the power shell script which accepts the sitecollection name and contentdb name as parameter. is this possible in  server obj.model ?
    passing a paramter from code behind- visual web part ui to power shell ?
    and it should create the site collec based on the web template and create the content db.
    my doubt #3 : will it not throw error "request timed out" when creating the site collec and contentdb from ui ?

    Try below:
    http://sharepoint.stackexchange.com/questions/21606/programmatically-create-a-site-collection-in-an-existing-mounted-content-databa
    PowerShell is just a wrapper for the object model. You shouldn't need to reference PowerShell in your feature, just create the new site collection with C# inside your feature. There's a blog post here that illustrates some code that may get you started.
    http://blog.mastykarz.nl/programmatically-creating-sites-site-collections-custom-web-template/
    http://blogs.msdn.com/b/vesku/archive/2014/06/09/provisioning-site-collections-using-sp-app-model-in-on-premises-with-just-csom.aspx
    # Enable the remote site collection creation for on-prem in web application level
    # If this is not done, unknon object exception is raised by the CSOM code
    $WebApplicationUrl = http://dev.contoso.com
    $snapin = Get-PSSnapin | Where-Object {$_.Name -eq 'Microsoft.SharePoint.Powershell'}
    if ($snapin -eq $null)
    Write-Host "Loading SharePoint Powershell Snapin"
    Add-PSSnapin "Microsoft.SharePoint.Powershell"
    $webapp=Get-SPWebApplication $WebApplicationUrl
    $newProxyLibrary = New-Object "Microsoft.SharePoint.Administration.SPClientCallableProxyLibrary"
    $newProxyLibrary.AssemblyName = "Microsoft.Online.SharePoint.Dedicated.TenantAdmin.ServerStub, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
    $newProxyLibrary.SupportAppAuthentication = $true
    $webapp.ClientCallableSettings.ProxyLibraries.Add($newProxyLibrary)
    $webapp.Update()
    Write-Host "Successfully added TenantAdmin ServerStub to ClientCallableProxyLibrary."
    # Reset the memory of the web application
    Write-Host "IISReset..."
    Restart-Service W3SVC,WAS -force
    Write-Host "IISReset complete."
    If this helped you resolve your issue, please mark it Answered

  • SCCM 2012 - Creating a Collection with Limiting memebers to 5 or 10 Computers even the Memebership Query can pull 1000 members

    Dear Brothers,
    I am deploying a huge application (requires 45 Minutes to Install, 3 to 5 Restarts), and I need to limit the deployment to 5 computers at a time. Limiting my Network Load and also the availability of the computers in operation as it requires a successive
    Restart.
    My aim is to "Create" a "Collection" to focus on deploying the software to
    5 computers at a time. The collection that limits to 5 computers can help our production environment to focus on the total deployment time without disturbing other computers.
    Regards,

    I would use powershell to do this. Create a Collection with all the computers that should get the application.
    Then in powershell - get all the members of that Collection into a variable. Use that variable as a basis for creating new Collection and create some logic that takes 5-10 machines and put those into a new Collection and then takes the next 5-10 machines
    and so on.
    I guess you could also do it using a combination of Query and Exclude Collections membership rules, but you would have to do it manually.

  • Unable to Create site collections with any template

    Hi All,
    We are using SharePoint 2013 , after long time am tried for create new BI center in one of our web application , but its taking more then 10 mints , the page is loading more then 10 mints , after that i just refresh the page and i got a error "Sorry
    this site was created already with this name".
    so , i try to enter the new site URL am getting error the page is not valid .
    i thought this was on issue with requirements on BI Center , so i checked the web application associated service application , but i have Visio Graphics service application , Excel Service Application and Performance point service application running for
    this web application .
    after some time i tried to create team site template site collection , i am facing the same issue again , i really dont know what is the issue with my CA , can any one help me to solve this issue ASAP.
    i tried to create site collection from PowerShell also , but am facing the same issue , even i got the same error while try to create sub site. i tried with refreshing IIS also , but its not worked.
    Am waiting for your valuable response .
    Thanks,
    Mani L
    Mani L

    Hello Mani L,
    Please make a host entry on you WFE server for the URL of the site you are trying to create. Then try browsing the site from same server.
    - First check if the binding is correctly configure in Alternate Access mapping on Central administration
    - Same binding should be provided under IIS for the web application
    If this doesn't resolve the issue then, for testing create a host entry for central admin hostheader url.
    To do this follow below mentioned steps:
    Go to Start -> Run -> Type drivers
    open HOSTS file in a notepad
    type IP address of the APP server and beside that with a tab key type URL of the site
    Save the file and try to browse the site in a fresh new browser after closing all the browser.
    Where SharePoint.com is my Host Header URL and IP address is the server IP where the site is hosted (APP Server generally)
    Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

  • How to create Vector with reference to Collection

    hello experts,
    can someone let me know how to create vector with reference to Collection interface.
    Collection is an interface. and we cant create an instance of it. i'm not clear of what to pass in that constructor.
    Vector v = new Vector (Collection c);
    what are the possible objects of 'c'
    post some example code please.
    thanks

    Ever heard of reading the javadocs?
    "Collection is an interface. and we cant create an instance of it." - you don't understand interfaces, then.
    // I certainly can create a Collection - here's one
    Collection c = new ArrayList();
    // Now I'll add some Strings to my Collection.
    c.add("foo");
    c.add("bar");
    c.add("baz");
    // Now I'll make a Vector out of it.
    Vector v = new Vector(c);%

  • In Create Collection in lr 5.4, no "sync with lightroom mobile"

    On my desktop copy of LR 5.4, when I go to Create Collection, there is no "Sync with Lightroom Mobile" option.  But it's there on my laptop LR5.4.

    Could you post a screenshot about what you are seeing? Are you signed-in? Thanks,Guido

  • Create a User Collection with installed specific software

    Can someone help with Query to Create a User Collection with installed specific software.
    I have created a collection for Computer Collection with installed specific software but i need to push apps on users and for that i need to create a user collection with specific software installed.
    Thanks

    Yes. I have created device collection with
    installed specific software and used  this collection to pull report from out the box report for Primary Device users( Not sure about exact report name but similar) for
    this collection. Did some excel work to find primary device user.
    But looks like there is no straight forward solution. It would be great if i know how to import multiple users from a text/csv file into a User collection.
    Thanks

  • Create collection from query with bind variable

    Apex 4.0.2
    Per Joel Re: Collection with bind variable the apex_collection.create_collection_from_query_b supports queries containing bind variable references (:P1_X) but I am not sure how to use this feature, the documentation doesn't have an example, just the API signature for the overloaded version has changed.
    If the query contains 2 bind variable references to session state (:P1_X and :P1_Y), can someone please show an example of what to pass in for the p_names and p_values parameters to the API?
    Thanks
    procedure create_collection_from_query_b(
        -- Create a named collection from the supplied query using bulk operations.  The query will
        -- be parsed as the application owner.  If a collection exists with the same name for the current
        -- user in the same session for the current Flow ID, an application error will be raised.
        -- This procedure uses bulk dynamic SQL to perform the fetch and insert operations into the named
        -- collection.  Two limitations are imposed by this procedure:
        --   1) The MD5 checksum for the member data will not be computed
        --   2) No column value in query p_query can exceed 2,000 bytes
        -- Arguments:
        --     p_collection_name   =  Name of collection.  Maximum length can be
        --                            255 bytes.  Note that collection_names are case-insensitive,
        --                            as the collection name will be converted to upper case
        --     p_query             =  Query to be executed which will populate the members of the
        --                            collection.  If p_query is numeric, it is assumed to be
        --                            a DBMS_SQL cursor.
        -- example(s):
        --     l_query := 'select make, model, caliber from firearms';
        --     apex_collection.create_collection_from_query_b( p_collection_name => 'Firearm', p_query => l_query );
        p_collection_name in varchar2,
        p_query           in varchar2,
        p_names           in wwv_flow_global.vc_arr2,
        p_values          in wwv_flow_global.vc_arr2,
        p_max_row_count   in number default null)
        ;

    VANJ wrote:
    Apex 4.0.2
    Per Joel Re: Collection with bind variable the apex_collection.create_collection_from_query_b supports queries containing bind variable references (:P1_X) but I am not sure how to use this feature, the documentation doesn't have an example, just the API signature for the overloaded version has changed.
    If the query contains 2 bind variable references to session state (:P1_X and :P1_Y), can someone please show an example of what to pass in for the p_names and p_values parameters to the API?Not tried it, but guessing something like
    apex_collection.create_collection_from_query_b(
        p_collection_name => 'foobar'
      , p_query => 'select f.foo_id, b.bar_id, b.baz from foo f, bar b where f.foo_id = b.foo_id and f.x = to_number(:p1_x) and b.y = :p1_y'
      , p_names => apex_util.string_to_table('p1_x:p1_y')
      , p_values => apex_util.string_to_table(v('p1_x') || ':' || v('p1_y')))

  • Creating collective deliveries with VL10A

    Hi All,
    While creating collective deliveries from sales orders using VL10A, i am checking a condition which if fails should not allow to create the delivery and also should log the errors in V_SA.
    I am using the subroutine MESSAGE_HANDLING to log the errors. But here is strange scenario, if i create the delivery with VL01n then the error message is issued and delivery stops but if i create the delivery using VL10a then the error log is created but still the delivery is getting created. Now, my requirement is that in VL10a such delivery should not be created at all and VL10a should continue with creating other deliveries in the backlog.
    P.S - I am using the exit MV50AFZ1 and the user exit is 'save_document_prepare'
    Regards,
    N. Reddy
    Message was edited by:
            nageswara reddy bireddy

    Hi Tamas,
    I already tried this using MESSAGE E statement. If i use this the system jumps to form SHP_VL10_DELIVERY_CREATE. and here it issues an abend message.
    The problem with this abend message is that if i use the background process to create the set of deliveries the abend message terminates the process and all the pending deliveries are not created.
    Is there any way by which i can skip the creation of this particular delivery and continue with creating other deliveries in VL10a.
    Regards,
    Nageswara

  • Creating new website with Fluid Grid Layout in CS6 - CS3 Transitions problem

    I am making my second website with Fluid Grid layout and as with my last one, it seems I can't use CS6 transitions. Each time I go to add a new transition, Dreamweaver stops working and shuts down. Should you be able to use the transitions function with CS6 transitions or not? In the end, what I want to do is create a behaviour where one image is swapped with another with a click (not a rollover as it won't work on mobiles, I believe).
    Thank you

    Add a link to jQuery's Latest Library to your document <head> tags.
    <script src="http://code.jquery.com/jquery-latest.min.js"></script>
    Add the jQuery function code to <script> tags in your document. I typically put them right above the closing </body> tag.
    <script>
    $(document).ready(function () {
        $("#one").click(function () {
            $("#one-a").toggle('slow');
        $("#two").click(function () {
            $("#two-a").toggle('slow');
        $("#three").click(function () {
            $("#three-a").toggle('slow');
    </script>
    </body>
    As to why DW is closing you down, I don't know.  That's not an expected behavior. 
    Without seeing your code, I'm going to guess that your CSS transition logic is incorrect or you're attempting to add transitions to the FluidGridLayout.css which is never a good idea.  Always use a separate, external style sheet for your manually added content styles.  Changes to either boilerplate.css or the temperamental FluidGridLayout.css files can result in problems.
    Nancy O.

  • I have been working on a book and have 418 photos already in my book.  All of a sudden I cannot access the book format to see the multiple view, spread view, or single view.  I can no longer see my book although I still see the collection with 418 photos

    I have been working on a book and have 418 photos already in my book.  All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on.  I can no longer see my book although I still see the collection with 418 photos under collections.  What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos.  It is like the new empty template is somehow covering it up.  How do I get back to the book I have been working on?

    Is it possible you mistakenly clicked on a [Clear Layout] button?
    But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
    Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
    Note: a Book Collection shows an icon that looks like a book.
    Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
    Re-opening a book without using the "Saved Book" option can have unpredictable results.
    A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc,  is automatically updated in the Saved Book collection.

  • Creating PO with reference to PR

    Hi experts,
    I am in a strange problem in our present business process
    the user need to create PO with reference to PR
    but with out using use roles
    i have tried with customising settings in IMG -
    MM-- Purchasing---PO--
    define Screen layout at document level in the i have made mandatory fields (PR at item level (ME21) document type (NB) and field selection (NBF) eventhough it is not woking
    please could any body can solve my problem?
    reward point will be give for useful answer
    regards
    raj

    Hai
    The problem is simple
    The path
    Img-> MM-> Purchasing-> Authorization Management
    select Define Function authorization for buyers
    enter new entries like CH & name it Purchase order
    In field selection NBF (Purchase order)
    now select the check box i.e reference to Purchase Requisition
    & save.
    then select
    maintaince users
    parameters
    enter EFB 7 enter Ch (i.e entry entered) & save
    if this is useful to you transfer this message to others who are facing the same problem.
    Sharing Knowledge is most important
    Regards & thanks
    Kalwa Pandarinath

Maybe you are looking for

  • I can't open bridge and minibridge from photoshop

    I can't open Bridge and Mini Bridge from Photoshop CS6 (64bit), I get an error message (APPCRASH )

  • Which version of Illustrator works with Windows XP?

    Which version of Illustrator works with Windows XP?

  • How to install windows like Lenovo do (U300e)

    It seems to me that Lenovo have installed windows on the C drive of my Lenovo U300e but also on the 32 GB SSD. So it is a sort of cached installation or something. The laptop boots of the SSD, but it is too small to do a windows install on so some of

  • IOS 5.1.1 unable to play a MP4 with single track subtitle

    Hello. I find a problem with iOS 5.1.1 I have iPhone 4 iPod touch 4 and iPad2 all of them are updated to iOS 5.1.1 them I found this bug! open video and play a MP4/M4V moive with single track subtitle. there is no way you can display the subtitle tra

  • How to get iDVD

    My computer crashed a few months back and I lost everything.  My external hard drive also crashed.  Sad day for my movies and pictures!  Were able to save some but noticed that I did not have iLife any more.  I rebought iMovie and iPhoto on the app s