Create container in FM workflow

Hi,
Please can some one tell me how can i make transport my container data to workflow bay the FM SAP_WAPI_CREATE_EVENT
Container must have this data:
      EMPLOYEENUMBER LIKE PAKEY-PERNR,
      SUBTYPE LIKE PAKEY-SUBTY,
      OBJECTID LIKE PAKEY-OBJPS,
      LOCKINDICATOR LIKE PAKEY-SPRPS,
      VALIDITYEND LIKE PAKEY-ENDDA,
      VALIDITYBEGIN LIKE PAKEY-BEGDA,
      RECORDNUMBER LIKE PAKEY-SEQNR,
Thanks for your help

Please try to learn some basics. Here is a link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b130453d11d189430000e829fbbd/frameset.htm
Regards, IA

Similar Messages

  • How to create a container element in workflow container

    Hi,
    I am learning WF by a Tutorial. In which absence of notification was considered as example. As per tutorial, I created two task for creating a Notification and checking a absence
    In the next step it ask to create a container element(approver) to workflow container. How i can create the same.
    Also, please clarify me on the binding between task container and workflow container....with this example
    Thanks
    Suresh

    Hi,
    On the workflow builder LEFT side below the navigation area u can see this <Double-Click to Create>.
    Double click and create the container.
    During binding it looks as follows.
    Workflow  -
    >   Task
    Workflow <----
    Task
    What happen here is from workflow the data passed to task and it is used for processing, after that it returned back to the workflow. Now u can create the container on bothside and bind the data. ie Variables.
    Creating container u can refer : http://www.****************
    Reward for useful answer.
    Richard A

  • How to create workflow container element from workflow builder?

    How to create workflow container element from workflow builder?

    in workflow
    three are five container, for each container we have define according to requirement of that particular container.
    1. event container
    2. workflow container
    3. task container
    4. method container
    5. rule container
    1. event container
    in evernt contianer we have to create elements in BOR where we create event in parameters
    2. workflow container
    in workflow container we have to create elements in workflow builder itself. in left side of the screen we see <double click to create element>
    3. task container
    in task container we have to create in task itself it has a tab called container elements
    4. method container
    in method container we have to create in BOR. it is created in parameter of that BOR.
    5. rule container
    in rule container we have to create in PFAC transaction

  • How to create distribution list in workflow? for  sending mail or work-item

    Hi,
    How to create distribution list in workflow? for  sending mail or work-item to multiple users.
    Regards,
    Surjith

    Hi Surjith,
    A.Working with Distribution Lists Creating a Distribution List.
    1 Businees Workplace->shared folder - create new subfolder name = WF_distributor
    2.Then click on the distribution list in Businees Workplace.
    say create Name = WF_Vliste
    folder Name = WF_distributor
    3.distribution list content tab
    Enter Recipient (SAP User ID)
    B.Wrkflow Builder
    Find out the dialig step in which u want to use distribution list
    Use workflow Rule 30000012 (SWX_READ_DLI).
    Maintain the binding from workflow container to rule container.
    Just pass the name of the distribution list from WF to Rule container.
    Regards
    Sagar S

  • Cannot create process to handle workflow instance conversation

    <Nov 18, 2002 1:04:30 PM IST> <Error> <B2B> <000000> <<Process>
    Hi,
    Iam getting following error when iam trying to invoke
    subworkflow.
    can anyone help me in solving this problem.
    regards
    Ananth
    ERROR: Cannot cr
    eate process null.>
    <Nov 18, 2002 1:04:30 PM IST> <Error> <B2B> <000000> <<B2B-BPM-Plugin> ERROR:
    Cannot create process to handle workflow instance conversation
    com.bea.b2b.protocol.ProcessManager$CreateException: ERROR: Cannot create proces
    s null.

    Hi Ajaz,
    Error description is not detailed enough to provide the solution. You need to post the error message what you got in the server log files. This should contain specific details about the issue.
    Not sure but issue may be related to JVM settings. if it is so, server log file will provide the error description.

  • Starnge problem while creating container elements in BPM

    Hi All,
    I am trying to create Container element of category Abstract Interface in BPM. While I try to give Type as the abstract interface created, it not populating the my   abstract interface and says: No obects found.
    Kindly, What could be the reason?
    Thx
    Navin

    Hi,
    You can use abstract sync inteface in the async-sync bridge (sender), using the async abstract interfaces as request and response to the sync abstract interface in the BPM sender properties configuration.
    Regards,
    Bill

  • Multiline container element in workflow

    Dear all,
    I am using a multiline container element in workflow container.  Can anybody suggest how I can see the values of that element?  After workflow execution is COMPLETED and I go to SWI1, it shows only simple elements.  It doesn't show any of my multiline elements.
    Please help.
    Thanks in advance,
    Regards,
    Pranav.

    Hi Pranav,
    It does work in 6.20. I am not sure about 4.6C.
    Display Technical Details from the Workflow log for your WF instance. You can examine the Container values for each of the steps. See if the values show up (are you certain your multiline container has been populated?). If you are populating the multiline container from an object method, verify by testing your object method that the parameter are correctly defined and it is getting populated.

  • Can we create an Ad Hoc workflow from a GP task listed in UWL?

    Dear All,
    Can we create an Ad Hoc Work flow from tasks which are generated using Guided procedures? If UWL does not provide this information can we some how implement the concept of Ad Hoc work flow from each step? The advantage is that when a person gets a task in his plate, he can create an Ad Hoc Workflow to take care of the request within their respective department for reviews and sub reviews.
    Thank You,
    Mansoor.

    Hi Mansoor,
    In sub task, even itu2019s linked with main task you donu2019t have a link or any UI to interact with main process. For this reason, itu2019s not possible.
    There are standard process roles like Overseer or Owner and custom roles, that is who will interact with each action/block. Assuming you have a manager and a team that will interact with a step in your process, you may define the manager as Overseer and the team group as processor of this step. In this case, you donu2019t have a specific forward feature, but you will treat that defining a group as processor and everyone inside this group may complete the task. The manager, as overseer, can track the process without need "hands on" with that.
    Best Regards,
    Pedro Nunes

  • How to create publishing custom approval workflow will assign approvers.

    Hi All,
    I am new in sharepoint development.
    I have a page library where we add artical page with different department
    I want to create publishing custom approval workflow will assign approvers based on what department is selected for display.  The departments pull from the Other list.  On that list each department is assigned an approval group. That approval
    group is what should be used for approving the item.
    need send to mail with based on selected department approval group
    thanks in advance.

    Ok, what you're asking for is something that people do all the time, but you say you are new to sharepoint development... So...
    Here's how you would do it in SPD:
    http://blog.symprogress.com/2011/03/sharepoint-2010-dynamic-approvers-for-oob-approval-workflow/
    and here's how you can do it in visual studio:
    http://www.mpspartners.com/2011/10/SharePoint2010ApprovalWorkflowDynamicApprovers/
    Either way should work, it just depends on your comfort level inside the dev environment.
    ieDaddy
    Blog: http://iedaddy.com
    Twit: @iedaddy

  • Not able to create Container in DAC

    Hi All,
    We are facing the below error while creating the container in DAC.
    Error : There is already Qserver running at the port 3141 shutting down the server
    Our Architecture is as follows:
    1. OBIA and DAC and Informatica Client is in one Windows server
    2. Informatica Server is in another windows Server
    3. Database is in unix
    Latest Update:
    Now we are not facing the above error, but still we are not able to create Container in DAC
    Regards,
    Kumar
    Edited by: user597882 on Dec 18, 2009 3:15 AM

    How do I kill the process? When I run the netstat command I am getting following result. I am not sure what to make out of it.
    netstat -a -n -o |grep 3141
    tcp 0 0 :::3141 :::* LISTEN off (0.00/0/0)
    tcp 0 0 ::ffff:127.0.0.1:3141 ::ffff:127.0.0.1:43725 CLOSE_WAIT off (0.00/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2420 ESTABLISHED off (0.00/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2417 FIN_WAIT2 timewait (52.29/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2416 FIN_WAIT2 timewait (47.28/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2418 FIN_WAIT2 timewait (57.28/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2405 FIN_WAIT2 timewait (7.29/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2407 FIN_WAIT2 timewait (12.29/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2412 FIN_WAIT2 timewait (32.29/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2415 FIN_WAIT2 timewait (42.28/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2414 FIN_WAIT2 timewait (37.28/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2409 FIN_WAIT2 timewait (22.28/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2408 FIN_WAIT2 timewait (17.28/0/0)
    tcp 0 0 ::ffff:10.112.18.125:3141 ::ffff:10.112.19.37:2410 FIN_WAIT2 timewait (27.28/0/0)
    unix 2 [ ACC ] STREAM LISTENING 31413 /tmp/orbit-root/linc-662a-0-1f92baf8aba35
    unix 3 [ ] STREAM CONNECTED 31419
    unix 3 [ ] STREAM CONNECTED 31418 /tmp/orbit-root/linc-65e0-0-56a41e9dd2292
    unix 3 [ ] STREAM CONNECTED 31417
    Any guidance is highly appreciated.
    Thank you,
    Dev.

  • Migrate the SharePoint 2007 Site containing SharePoint Designer Workflows with Infopath forms to SharePoint 2013

    Hi,
    We have a requirement to migrate the SharePoint 2007 Site containing  SharePoint Designer Workflows with Info path forms to SharePoint 2013.
    Can somebody please guide us as to what could be the best approach to go ahead?
    Thanks in advance.
    Regards,
    Vijay

    Use STSADM
    backup and
    restore to migrate SharePoint 2007 site
    containing  SharePoint Designer Workflows with Info path forms to SharePoint 2013. 

  • Create document set by workflow based on external list

    Hello,
    I'm wondering if the following is possible:
    I have a external list with all my projects.
    Next to that i have an document library where i place all the documents about the projects in document sets. Is it possible to automatically create the document sets based on the external list?
    So when a new record is created in the database (External list) it automatically creates a document set. (The document sets have an external data column which refers to the projects external data)
    I was thinking of an workflow, but i don't know how to accomplish this. I'm just a beginner with SharePoint.
    Kind regards,
    Robbert-Jan

    Hi Robbert ,
    According to your description, my understanding is that you want to create a document set for an external list in SharePoint 2013.
    For achieving your demand, you can refer to the article:
    http://msdn.microsoft.com/en-us/library/ff394479(v=office.14).aspx
    http://blogs.msdn.com/b/chandru/archive/2013/08/10/sp2013-creating-document-set-using-workflow.aspx
    One thing to notice is you cannot associate workflow with External List because workflow engine cannot run on back end system.
    Reference:
    http://siddiq-sharepoint2010.blogspot.in/2011/12/bussniess-connectivity-services.html
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Several html widgets I created contain the javascript libraries. Is there a way to create a common javascript library that can be accessed by all my widgets? I'm trying to reduce the size of the ibook I'mm creating.

    Several html widgets I created contain the javascript libraries. Is there a way to create a common javascript library that can be accessed by all my widgets? I'm trying to reduce the size of the ibook I'm creating.

    Seen this thread?
    Can javascript libraries be shared across widgets?

  • Ho w to create a field using workflow ?

    how to create a field using workflow ?

    Hi,
    According to your description, my understanding is that you want to trigger a workflow only once when a item is updated.
    If you want to set it programmatically, I suggest you can create a Yes/NO column called flag firstly with the default value No and set the workflow start option to manually start.
    When updating the list item, you can create a ItemUpdated Event Receiver to track the update action, and in the event, you can judge the flag column value, if the value is No, then you can trigger the workflow programmatically and in the end of code set
    the code to Yes ,if the value is Yes, then not trigger the workflow.
    Here are some detailed code demos for your reference:
    How to set and read value of Yes/No column programmatically?
    How
    to programmatically start sharepoint workflow
    How to create an event receiver
    Thanks
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Create Material Master using workflow (urgent)

    Hello all,
    We have an urgent client requirement to create material master using workflow.
    Different views for the material master will be created by the relevant departments.
    ex: Accouting 1, 2 will go to accounts deptt.
    I have studied the workflow tutorial  (20 units) on <b>SAP help</b> for leave of absence and have some understanding of objects, methods, bindings etc
    I am however finding it very difficult to define the steps to create a workflow for material master. Are there any standard steps already defined that i can use.
    Any help/inputs will be greatly appreciated.
    Regards
    S. Datar

    Hi,
    You need to speak to a workflow consultant.
    You can get workflow to do many things (including creating a material master) but it takes a lot of coding and design.
    For those of you who think that workflow is just used for the standard SAP workflow tasks, you have to realise that workflow is far more powerful and far more useful than many people think.
    It is always referred to as "Event triggered messaging" but it is more accurate to call it "Event triggered events".
    Within workflow you can chain together many different transactions and or ABAPS and so you can get it to do virtually anything you want (as long as you know how).
    In this case you need the workflow to trigger an ABAP or BTCI session etc. that works through the MM01 transaction. It is relatively easy to get it to do this, but I am not technical enough to be able to help with the steps involved (sorry)
    Steve B

Maybe you are looking for