Create Database connection in TP3

Hi,
I'm trying to create a DB connection via New->General->Connections->Database connections. However when I click Ok nothing happens. I have tried for other types of connections (eg URL, BAM) and a wizard appears. Anyone got any ideas as to what may be going wrong?

Frank,
I've tried you suggestion of View -> database navigator but still nothing happens. I have gone back to 10g and all works fine there.
I'm rather new to the world of Java so I'm trying only the basics..... and seem to be running into brick walls all over the place.
Cheers,
Tim.

Similar Messages

TP4: Can't create database connection

I have just installed JDeveloper TP4 and run it for the first time. When I try to create database connection, nothing happens. Specifically, I right click on "IDE Connections" and select "New Connection" - and nothing happens; no messages, no dialogs, nothing. Is there something I have to have installed before this will work? I have Sun's Java 6 installed - I noticed that JDeveloper warns about this. Would it cause this problem?

Hi,
can you try with JDK 5 to exlude and issue with JDK 6. It works for me with JDK 5 so, there might be an issue with you Java runtime
Frank

Create database connection

I try to create database connection in jdeveloper.
I have error message;
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
10.41.119.12:1620:TEST
I did connect with database before. but I try to create connection with database today.
I cannot. what problem is it?
what am i goint to do?

Hi,
Maybe your connecting directly after the listener starts, wait a while then try to connect again, if this problem still occurs, check the SID of your Connection settings, it maybe incorrect.
Regards,
Ahmad Esbita

Issue in creating Database Connection to HFM Applicaion through workspace

Hi,
This is a fresh installation. We are trying to create a new database connection in workspace for HFM Application.
When i click on the Application selection icon, it gives me the below error message,
*"Error connecting to database connection nasbyphyp03: Error: Error getting CSS support information for driver* HsvAdmDriver*".*
I tried re-installing the HsvAdmDriver, but still the problem persists. (nasbyphyp03 is the server name)
But, i am able to access HFM Application from workspace and smartview.
Please advice.
Thanks,
Siva

Can anyone suggest me the solution ???
We are struck with this and unable to process any Reports
Thanks,
Siva

Issue in creating Database Connection to HFM Application through workspace

Hi,
This is a fresh installation. We are trying to create a new database connection in workspace for HFM Application.
When i click on the Application selection icon, it gives me the below error message,
*"Error connecting to database connection nasbyphyp03: Error: Error getting CSS support information for driver* HsvAdmDriver*".*
I tried re-installing the HsvAdmDriver, but still the problem persists. (nasbyphyp03 is the server name)
But, i am able to access HFM Application from workspace and smartview.
Please advice.
Thanks,
Siva

Can anyone suggest me the solution ???
We are struck with this and unable to process any Reports
Thanks,
Siva

Create database connection for oracle ver.8.1.7.4 unsucessful

I trying create a database connection with jdeveloper 11g to db oracle ver.8.1.7.4, but the connection return error "Test failed: Unsupported Oracle database version". I selected connection type: "Oracle (JDBC)" and initially selected driver: "thin", after exchange to driver: "oci8", but return error: "Test failed: no ocijdbc11 in java.library.path". Created on menu > Tools > Preferences > JDBC driver options a new driver: "some.jdbc.Driver" pointing to Driver class: "some.jdbc.Driver", library: "oracle.jdbc.OracleDriver", class path: "c:\...\oracle\jdbc\lib\ojdbc14.jar".
Tried to create with this driver with the option "Generic JDBC" pointing to this driver created and using jdbc url: "jdbc:oracle:thin:@//255.255.255.255:1521/ServerId", but return error: "Test failed: Driver class not found. Verify the Driver location"
Now, i don´t know to do!!!

John,
i have the data corporate in this DB in this version. I have already tested with the oracle JDBC driver: "ojdbc14.jar" and works in the "Eclipse" IDE, but i want to use with jdev, understand? Can i test only with this jdbc driver if i set "generic JDBC"?, because if i set "oracle JDBC" this driver is pointing to oracle 11g driver. Is there a "step-by-step" to set this correct procedure? I cannot set "oracle JDBC" of list because the driver class is disabled.

How to create database connection using DB2Driver in JDeveloper 10.1.2.1.0?

I am trying to create a JDeveloper/Data Connection using com.oracle.ias.jdbc.db2.DB2Driver. The driver is registered from a User Libraries: DataDirect JDBC. I have the following class path for the library:
E:\DataDirect\3.4\lib\YMdb2.jar;E:\DataDirect\3.4\lib\YMbase.jar;E:\DataDirect\3.4\lib\YMutil.jar
I have no trouble configuring the connection but when I test it and I got No suitable driver Vendor code 0. Whats wrong? I have successfully created several database connections using Oracle thin driver. This is first time I am using a third party driver. Has any one successfully create a database connection using the com.oracle.ias.jdbc.db2.DB2Driver?

Hi
Since the error points to the unavailability of the driver class,can you double check your library claspath entries again.
I just tried a DB2 connection using the following properties and the connection went through fine:
Driver class name: com.oracle.ias.jdbc.db2.DB2Driver
URL: jdbc:merant:db2://<host_name>:50000;DatabaseName=SAMPLE
Thanks
Prasanth

How to create database connection in JDev

Dear Sir,
I am not able to create a connection to the Oracle9i database in JDeveloper.Plz guide me.
Thanx
Aradhana Jain

Please post this in the JDeveloper forums for an appropriate response: JDeveloper and ADF
OTN

Create database connection with Mysql

Hi, all:
inside JDeveloper, i try to create a database connection for Mysql (third party
JDBC driver). I input all needed parameters into
JDeveloper database connection dialog, and test connection, the error message
says 'Unable to find driver org.gjt.mm.mysql.Driver". The jar file contains driver
is listed in system classpath, and Mysql and MM-Mysql JDBC driver are tested with
other applications and there is no problem.
So, what i should do to create such a connection ??
Any help will be appreciated. thank you in advance.
kevin.

The connectio URL could look like this:
(leave the User-, Password-, and Role-fields, in the tab before, empty)
Java Class Name: org.gjt.mm.mysql.Driver
URL: jdbc:mysql://localhost:3306/test?ultradevhack=true&?user=myuser&?password=mypassword

Try to connect oracle in portal 4.0 and cannot create database connection for the realm

hello,
i have try to use the method in configuring Weblogic Portal for Oracle Database.
I have made all with no problems
but when i stop and i start the weblogic portal i have this error
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException
: An error occured creating a database connection for the realm.]
Any one have a solution? Thx!

Jean-Philippe,
This usually is due to a DB configuration issue. Check your RDBMS realm
username, password and driver properties. Check your database is running and
have enough Connection free.
Sincererly,
Daniel Selman
"jpmeert" <[email protected]> wrote in message
news:3c88e867$[email protected]..
>
hello,
i have try to use the method in configuring Weblogic Portal for OracleDatabase.
>
I have made all with no problems
but when i stop and i start the weblogic portal i have this error
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException
: An error occured creating a database connection for the realm.]
Any one have a solution? Thx!

Creating database connection without administrator

I need to create a new database connection for coldfusion mx
7 on winblows 2003 but coldfusion administrator is broken. Is there
any way to create a new JDBC connection without it? Perhaps some
registry or ini file editing? How about for ODBC?

You can code a template to create a datasource using the
adminAPI. The examples do just that. View the MSSQL example on this
page,
Administrator
API.
However, you might just want to fix you CFAdmin. Got to a
working CFMX7 server of the same version. Zip up all of CFIDE
(usually under wwwroot of cfusion or your docroot). Delete the
'broken' one on your server. Unzip the CFIDE zip to replace.

Create database connection once.

a newbie's Question. I want to create a database connection in a jsp file just once so that when a user hits the same jsp, the connection is not needed to be recreate until he/she leaves the page or shut it down. thanks.

bad design.
connections don't belong in jsps. they should be checked in and out of a container-managed connection pool by a java bean that interacts with the database on behalf of the client. not the right way to do it.
%

How to create database connection and how to call it using Java

Hi,
Good day! I'd like to know how I can create a db connection in JDev, then use this connection to retrieve data using a Java Class? I've seen using New Gallery > Database Connection. But I'm not sure how I can access this connection using Java and display some output from the retrieved records.
Any steps/tutorial link is appreciated.
Thanks in advance,
Rian

Hi,
If you need to access the connection in the entity object then refer http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcadvgen.htm#BABEIFAI i.e in MODEL.
But if you want to access connection in ViewController part of application then you need to do it manually.For this i am giving you my code for reference.------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
import java.sql.Connection;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
import javax.faces.context.FacesContext;
import oracle.jdbc.pool.OracleDataSource;
public class DataHandler {
String jdbcUrl = null;
String userid = null;
String password = null;
Connection conn;
public static final String CONNECTION_STRING =
FacesContext.getCurrentInstance().getExternalContext().getInitParameter("connectionString");
public static final String USER_NAME =
FacesContext.getCurrentInstance().getExternalContext().getInitParameter("userName");
public static final String PASSWORD =
FacesContext.getCurrentInstance().getExternalContext().getInitParameter("password");
public DataHandler(String jdbcUrl, String userid, String password,
boolean shouldConnect) throws SQLException {
this.jdbcUrl = jdbcUrl;
this.userid = userid;
this.password = password;
if (shouldConnect) {
connect();
public void connect() throws SQLException {
OracleDataSource ds;
ds = new OracleDataSource();
ds.setURL(jdbcUrl);
conn = ds.getConnection(userid, password);
public Connection getConnection() {
return conn;
public ResultSet executeQuery(String sql) throws SQLException {
Statement s = conn.createStatement();
return s.executeQuery(sql);
public void closeConnection() throws SQLException {
if (!conn.isClosed()) {
conn.close();
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Not Possible Create Database Connection to Essbase From Web Analysis Studio

Hello
It is not possible to create a database connection to Essbase cluster from Web Analysis (WA) Studio. The following error message is displayed:
"Unable to retrieve the list of available databases"
And the detail:
[1033] Native: 1003 Error: Create connection failed [For input string:
[ApsServer=, OlapServer=[HOST];]]
Foundation Services, Agent, Financial Reporting and Web Analysis are enabled.
As additional information from EAS can seamlessly connect to Essbase server.
The EPM version is 11.1.2.2
Please help. thanks
regards
Rodrigo

Hi ,
For creating a WebAnalysis database connection, please make sure you do the following :
1. Verify if you have Essbase client installed on the WebAnalysis server.
2. Check if the path of adm drivers are mentioned in the system environment variable -> PATH entries.
3. Try giving the Essbase server name instead of the cluster name when attempting to create a connection.
4. The error 1003 means it doesnt seem to create a connection with the server and while attempting it fails.
Make sure you have all the parameters mentioned correctly in the server details.
To get detailed information on what is causing the problem, make sure you stop the WebAnalysis service and start it from console .

Error during create database connection (JDeveloper)

Hello!
Have you any suggestions of this: When I try to create new database connection to 9i DBMS, I've got errors:
ORA-00604: error with recursive SQL
ORA-12705: Invalid or unknown NLS parameter value specified.
At the same time I try to do the same with another one DBMS,
10g, and everything is Ok.
Thanks.
Andrew.

Stephen, sure, I did all actions you described, during "Create new Database Connection":
(filling in driver (thin), host name (i.e. localhost), jdbc port (i.e. 1521), and sid (i.e. orcl) )
Th result I think should be looks like
jdbc:oracle:thin:@wizard.shots.ru:1522:VIVD
(tns for that DBMS is
VIVD.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = wizard.shots.ru)(PORT = 1522))
(CONNECT_DATA = (SID = VIVD))
As I wrote, the same actions give OK result, if dbms = 10g.
But, I want to test OEBS adapter, and OEBS stands on 9i DBMS only,
so I need to work with 9i
Thanks.
Andrew.

Create Database connection in TP3

Similar Messages

Maybe you are looking for