"Create" Datasource Privilege for Deployer Role

Hi,
We want to enable the "create" datasource privilege for the Deployer Role, after reading some information for this role looks like they are only allow to modify or delete datasources, but not create them. Admin privilege is not a good option for this group.
Any ideas or suggestions...

BoopathyVasagam wrote:
Thank you for your answer. So should I issue the below statement? (Since I dont have dba privs i couldn't test this)
GRANT CREATE VIEW to P_ETL_TEST_VIEW;
I doubt that above will prevent the error from being thrown.
prior to running anonymous block again; just do as below
SET ROLE NONE;
doing so should result in same error being thrown when invoking
BEGIN 
   p_etl_test_view; 
END; 

Similar Messages

  • Problem creating Network ACL for a ROLE in Oracle 11gR2

    According to Oracle Documentation when you create a new Network ACL you can add privileges to a user or role.  I need to create a new ACL for the UTL_SMTP package for a specific role, but when I granted it the users who have that role are still getting the "ORA-24247: network access denied by access control list (ACL)" error when they try to send an email.  If I grant the ACL privilege to the same users directly it works fine.  Is there any step I'm missing?  This is the test I have made on my Solaris 10 - Oracle 11gR2 (11.2.0.3) Standard Edition server:
    SQL*Plus: Release 11.2.0.1.0 Production on Wed Aug 21 09:31:52 2013
    Copyright (c) 1982, 2010, Oracle.  All rights reserved.
    SQL> CONNECT system/******@testdb
    Connected.
    SQL> SET LINES 1000
    SQL> SELECT * FROM v$version;
    BANNER
    Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    CORE    11.2.0.3.0      Production
    TNS for Solaris: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production
    SQL> COLUMN host FORMAT A20
    SQL> COLUMN lower_port FORMAT 99999
    SQL> COLUMN upper_port FORMAT 99999
    SQL> COLUMN acl FORMAT A40
    SQL> COLUMN acl FORMAT A40
    SQL> COLUMN principal FORMAT A15
    SQL> COLUMN privilege FORMAT A10
    SQL> COLUMN is_grant FORMAT A8
    SQL> COLUMN status FORMAT A10
    SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
    no rows selected
    SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
    no rows selected
    SQL> CREATE USER testacl IDENTIFIED BY testacl;
    User created.
    SQL> GRANT CONNECT TO testacl;
    Grant succeeded.
    SQL>
    SQL> BEGIN
      2     dbms_network_acl_admin.create_acl('test_smtp.xml','TEST SMTP ACL','TESTACL',true,'connect');
      3     dbms_network_acl_admin.assign_acl('test_smtp.xml','localhost',25);
      4     commit;
      5  END;
      6  /
    PL/SQL procedure successfully completed.
    SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
    HOST                 LOWER_PORT UPPER_PORT ACL
    localhost                    25         25 /sys/acls/test_smtp.xml
    SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
    ACL                                      PRINCIPAL       PRIVILEGE  IS_GRANT
    /sys/acls/test_smtp.xml                  TESTACL         connect    true
    After creating this ACL I test it like this:
    SQL> CONNECT testacl/testacl@testdb
    Connected.
    SQL> SELECT host, lower_port, upper_port, privilege, status FROM user_network_acl_privileges;
    HOST                 LOWER_PORT UPPER_PORT PRIVILEGE  STATUS
    localhost                    25         25 connect    GRANTED
    SQL> DECLARE
      2     c utl_smtp.connection;
      3  BEGIN
      4     c := utl_smtp.open_connection('localhost', 25); -- SMTP on port 25
      5     utl_smtp.helo(c, 'localhost');
      6     utl_smtp.mail(c, 'Oracle11.2');
      7     utl_smtp.rcpt(c, '[email protected]');
      8     utl_smtp.data(c,'From: Oracle'||utl_tcp.crlf||'To: [email protected]'||utl_tcp.crlf||'Subject: UTL_SMTP TEST'||utl_tcp.crlf||'');
      9     utl_smtp.quit(c);
    10  END;
    11  /
    PL/SQL procedure successfully completed.
    SQL>
    This works fine and I receive the email correctly.  Now if I try to do the same thing for a role:
    SQL> CONNECT system/******@testdb
    Connected.
    SQL> BEGIN
      2     dbms_network_acl_admin.drop_acl('test_smtp.xml');
      3     commit;
      4  END;
      5  /
    PL/SQL procedure successfully completed.
    SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
    no rows selected
    SQL> CREATE ROLE testacl_role;
    Role created.
    SQL> GRANT testacl_role TO testacl;
    Grant succeeded.
    SQL> ALTER USER testacl DEFAULT ROLE ALL;
    User altered.
    SQL>
    SQL> BEGIN
      2     dbms_network_acl_admin.create_acl('test_smtp.xml','TEST SMTP ACL','TESTACL_ROLE',true,'connect');
      3     dbms_network_acl_admin.assign_acl('test_smtp.xml','localhost',25);
      4     commit;
      5  END;
      6  /
    PL/SQL procedure successfully completed.
    SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
    HOST                 LOWER_PORT UPPER_PORT ACL
    localhost                    25         25 /sys/acls/test_smtp.xml
    SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
    ACL                                      PRINCIPAL       PRIVILEGE  IS_GRANT
    /sys/acls/test_smtp.xml                  TESTACL_ROLE    connect    true
    SQL>
    And now I test it again with the same user:
    SQL> CONNECT testacl/testacl@testdb
    Connected.
    SQL>
    SQL> SELECT host, lower_port, upper_port, privilege, status FROM user_network_acl_privileges;
    no rows selected
    SQL> DECLARE
      2     c utl_smtp.connection;
      3  BEGIN
      4     c := utl_smtp.open_connection('localhost', 25); -- SMTP on port 25
      5     utl_smtp.helo(c, 'localhost');
      6     utl_smtp.mail(c, 'Oracle11.2');
      7     utl_smtp.rcpt(c, '[email protected]');
      8     utl_smtp.data(c,'From: Oracle'||utl_tcp.crlf||'To: [email protected]'||utl_tcp.crlf||'Subject: UTL_SMTP TEST'||utl_tcp.crlf||'');
      9     utl_smtp.quit(c);
    10  END;
    11  /
    DECLARE
    ERROR at line 1:
    ORA-24247: network access denied by access control list (ACL)
    ORA-06512: at "SYS.UTL_TCP", line 17
    ORA-06512: at "SYS.UTL_TCP", line 267
    ORA-06512: at "SYS.UTL_SMTP", line 161
    ORA-06512: at "SYS.UTL_SMTP", line 197
    ORA-06512: at line 4
    SQL>
    I'm aware that role privileges doesn't apply inside procedures, functions or packages by default, but this is an anonymous block so it should use the active roles for the user.  I also tried adding a "dbms_session.set_role('TESTACL_ROLE');" at the beggining of the anonymous PL/SQL block but I got the same access error.
    Thanks in advance for any help you can give to me on this question, it would be very hard to grant the ACL to all the individual users as they are more than 1000, and we create more regularly.

    Thanks for your quick reply... I don't have a problem creating the basic ACL with the privileges granted for a user.  The problem appears when I try to create an ACL with privileges for a ROLE.  You can see here http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/d_networkacl_adm.htm#BABIGEGG than the official Oracle documentation states that you can assign the ACL principal to be a user or role:
    Parameter
    Description
    acl
    Name of the ACL. Relative path will be relative to "/sys/acls".
    description
    Description attribute in the ACL
    principal
    Principal (database user or role) to whom the privilege is granted or denied. Case sensitive.
    My issue is that when I try to create the ACL for a role it doesn't work.
    Have you ever created an ACL for a role? if so please send me an example or let me know which step I might be missing.  Cheers.

  • Error while creating datasource userdsn for oracle 10g Errorcode (998)

    while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon

    Thanks for your reply , Steve.
    I noticed that there is a default datasouce on the EM with the following parameters:
    <data-source
              class="com.evermind.sql.DriverManagerDataSource"
              name="OracleDS"
              location="jdbc/OracleCoreDS"
              xa-location="jdbc/xa/OracleXADS"
              ejb-location="jdbc/OracleDS"
              connection-driver="oracle.jdbc.driver.OracleDriver"
              username="scott"
              password="->pwForScott"
              url="jdbc:oracle:thin:@localhost:1521:oracle"
              inactivity-timeout="30"
         />
    The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
    What should be the values for location and xa-location attributes from my "test" data source?
    Any help will be greatly appreciated.
    Thanks,
    Shyam

  • Find out operator privilege for a role

    Hi,
    How to find out targets missing operator privilege for a role in OEM?

    From the backend you should use EMCLI
    Check http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b40004/cli_verb_ref.htm#BABFGJBG

  • Why Oracle removed "Create View" privilege from "Resource" role?

    Seems like a silly question, but does anyone know why?

    >
    Hm.. deprciated and replaced by what? I know they trimmed CONNECT a lot but only create view seemed missing from RESOURCE.
    >
    Replaced by NOTHING. They didn't just 'trim' CONNECT; it only has the CREATE SESSION privilege now.
    The only published info I've seen are these two notes in the Oracle is this from the Database Security Guide.
    http://docs.oracle.com/cd/B28359_01/network.111/b28531/authorization.htm
    >
    Note:
    Each installation should create its own roles and assign only those privileges that are needed, thus retaining detailed control of the privileges in use. This process also removes any need to adjust existing roles, privileges, or procedures whenever Oracle Database changes or removes roles that Oracle Database defines. For example, the CONNECT role now has only one privilege: CREATE SESSION. Both CONNECT and RESOURCE roles will be deprecated in future Oracle Database releases.
    Note:
    Customers should discontinue using the CONNECT and RESOURCE roles, as they will be deprecated in future Oracle Database releases. The CONNECT role presently retains only the CREATE SESSION privilege.

  • How to grant create table privilege for a user on a specific table

    Hi:
    I created a user, for a test scenario. I granted this user create any table, and I made the default tablespace as example.
    When I connect as the user and try to create a table, I get this:
    SQL> create table T1 (NAME varchar2 (500), AGE number(2));
    create table T1 (NAME varchar2 (500), AGE number(2))
    ERROR at line 1:
    ORA-01950: no privileges on tablespace 'EXAMPLE'
    How can I grant the necessary privilege to have user create/delete tables on tablespace example?
    Thanks.
    DA

    create user ADAM identified by radge default tablespace EXAMPLE
    quota 10M on EXAMPLE;
    for example 10Mbytes given to Example tablespace.... or you can write:
    .....quota unlimited on EXAMPLE
    and
    grant connect to ADAM
    grant create table to ADAM .....
    or
    grant connect , resource to ADAM .... although grant resource is not recommended...
    ....and something else....
    you should define temporary tablespace in create user command... otherwise the system would be used...
    Greetings...
    Sim
    Message was edited by:
    sgalaxy

  • PFCG, derived roles, create inheritance relation for existing roles

    Dear reader,
    We have many roles that differ only in the organisational levels, but were not created using the Transaction Inheritance functionality.
    Because of the sheer number of these similar roles, making a change in a non-organisational field in these roles is quite laborious.
    Such a change is much easier when there is an inheritance relation between a template and all dependent roles.
    Is there a way to set up the inheritance relation between a template and it's dependent roles after their creation ?
    Kind Regards,
    John Hermans

    My own thinking what will happen if we combine so and so roles....
    I have a other basic question regarding the field values of a A.object.As we know the one particular A.object is related to so many T.codes.Eg:assigning just 1 tcode to a role which contains 5 A.objects(those 5.A.objects are related to so many different T.codes).If we generate the profile for the role it will bring up all the mandatory field values for that specific T.code which is added.Suppose if we assign some values in the fields which are blank(maintain) or even changing the standard values(01,02 standard but deleting those values and assigning 03,04).Will the user gets accesss for the maintained/changed field values ? The reason for asking is ,as we are deleting the mandatory field values of the tcode and assigning some other values which are standard values for some other Tcodes (which are not added in the menu)
    Pls excuse me if it confuses ....

  • Viewing privileges for a Role

    Hi ,
    I have a role R.
    I want to see what privileges have been granted to this Role R.
    Where should i query?
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    "CORE    11.2.0.3.0    Production"
    TNS for Solaris: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production

    Hi, whilst this response does not directly answer your question, it will give you a greater ability to answer questions such as these for yourself without having to wait for someone else to post the solution for you.
    SELECT *
    FROM dict
    WHERE table_name LIKE '%ROLE%';
    DICT is a view that allows you to see the names (and minor details) of all the data dictionary tables (the sort of place you will find the tables pertaining to roles, privileges, tables, tablespaces etc etc etc)
    Give it a try, and pass different values into the search string too.

  • Creating a dropdown for Roles

    Hello All,
    Can anybody please help me to create a dropdown for various roles in the portal,so that if the user clicks on the first role in the Top Level Navigation ,he should see a dropdown list with other roles being displayed and listed to be selected ...
    Any help would be really appreciated
    Thanks

    hi subhash.....
    are u trying this in PDk or in WebDynPro.....???
    if its in PDK...the following code will work....
         public DefaultListModel getRoleModel() {
              roleList = new DefaultListModel();
              roleList.setSingleSelection(true);
              roleFactory = UMFactory.getRoleFactory();
              try {
    //               String[] roles = roleFactory.getRolesOfUser(uniqueID,true);
                   searchRoleFilter = roleFactory.getRoleSearchFilter();
                   searchResult = roleFactory.searchRoles(searchRoleFilter);
                   int i = 0;
                   while (searchResult.hasNext()) {
                        Object name = searchResult.next();
                        IRole role = roleFactory.getRole(name.toString());
                        String roleName = role.getDisplayName();
                        if(roleName!=null)
                        roleList.addItem(role.getUniqueID(),roleName);
                        i++;
              } catch (UMException e) {
                   e.printStackTrace();
              return roleList;
    Regards,
    Sudheer
    Message was edited by:
            Sudheer Reddy
    Message was edited by:
            Sudheer Reddy

  • Creating a dropdown for Roles in Top Level Navigation

    Hi,
    I am trying to customize the com.sap.portal.navigation.toplevel.par file.
    Can anybody please help me to create a dropdown for various roles in the portal,if the user clicks on the first role in the Top Level Navigation ,he should see a dropdown list with worksets of the role.
    Any help would be really appreciated
    Thanks
    Art Tech.

    Hello Art Tech,
    I hope I understand you right. You want to change the appearance of the custom built TLN according to the currently chosen portal theme, just like the standard TLN would change its appearance.
    Well, if so, then there are two ways:
    1) The HTML and styles/classes of your custom built TLN are still more or less the same as in the standard or you can at least reuse most of the standard HTML output/structure, then applying a new theme would also affect your custom TLN.
    2) You have your own HTML output for the TLN, not relying on anything from the standard TLN, and you most probably work with a custom stylesheet file (e.g. "tln.css"). What you have to do then is to provide a set of TLN stylesheet files for each portal theme you want to support and include it accordingly by retrieving the current theme's name via the ILafService (Look & Feel Service). Or you rely on only one CSS file, then have as many "blocks" of styles (marked with a preceding class selector like in e.g. ".themeNameA ul li a " and ".themeNameB ul li a ") as you have themes, and put a bracket around the TLN-output with class="currentThemeName". For this last approach I give you the sample code (assuming you want to support the themes "SAP Standard", "SAP Tradeshow" and "SAP Chrome"):
    The TLN code: tln.jsp
    &gt;<%@ taglib uri="NavigationTagLibrary" prefix="nav" %>
    &gt;<%@ page import = "com.sapportals.portal.prt.service.laf.*" %>
    &gt;<%@ page import = "com.sapportals.portal.prt.runtime.PortalRuntime" %>
    &gt;<%
    &gt;// include the TLN stylesheet
    &gt;response.include(componentRequest, componentRequest.getResource("css", "css/tln.css"));
    &gt;
    &gt;// retrieve the current theme's technical name
    &gt;ILAFService iLAFService = (ILAFService)PortalRuntime.getRuntimeResources().getService(ILAFService.KEY);
    &gt;String currentTheme = iLAFService.getCurrentTheme(componentRequest).getThemeName();
    &gt;%>
    &gt;
    &gt;&lt;div class="<%=currentTheme%>"&gt;
    &gt;  &lt;ul&gt;
    &gt;  <nav:iterateInitialNavNodes>
    &gt;    &lt;li&gt;<nav:navNodeAnchor navigationMethod="byURL" />
    &gt;    <!-- second level ? -->
    &gt;    &lt;/li&gt;
    &gt;  </nav:iterateInitialNavNodes>
    &gt;  &lt;/ul&gt;
    &gt;&lt;/div&gt;
    The stylesheet: tln.css
    &gt;.sap_standard ul li {background-color:#FFCCCC}
    &gt;.sap_standard ul li a
    &gt;
    &gt;.sap_tradeshow ul li {background-color:#CCCCFF}
    &gt;.sap_tradeshow ul li a
    &gt;
    &gt;.sap_chrome ul li {background-color:#CCCCCC}
    &gt;.sap_chrome ul li a
    I hope this solves your problems.
    Best regards,
    Sven Kannengiesser

  • How to create DataSource for BI Source System in RSA1?

    I have a BI Source System defined, however I can't figure out a way to create a new DataSource for it. I can create DataSource objects for all my other Source Systems, but I can't figure out how to do this for this BI system.
    I select my BI Source System, right-click, choose "Display DataSource tree". When I right-click from the DataSource tree, I expect to get "Create Application Component" and "Create DataSource" options, but instead I only see "Replicate Tree Metadata" and "Replicate DataSources" options.
    How can I create DataSource objects for my BI system?

    Hi,
    I guess you want to create a custom developed source in BI itself. For that you need to create the data source in RSO2 and inside you need to give the specific aplication component under which you want this DS to be in. Generate a data souce and then go to BI My self Source system and then replicate that particular appl component o view your data source.
    Hope this helps
    Regards,
    Srini

  • Privilege for creating a View from a Stored Procedure

    Hi,
                         I need to create a view from a procedure. I could do it from an anonymous block whereas I am unable to do that from a Stored Procedure. Should I need a specific privilege for performing this operation? If so what would be the reason behind it? Will that privilege be given in production databases?
    Code to replicate:
    CREATE TABLE t11 AS SELECT * FROM DUAL;
    CREATE OR REPLACE PROCEDURE p_etl_test_view
    AS
    BEGIN
       EXECUTE IMMEDIATE 'CREATE OR REPLACE VIEW v_t11 AS SELECT * FROM t11';
    END;
    PROCEDURE P_ETL_TEST_VIEW compiled
    Elapsed: 00:00:00.131
    BEGIN
       EXECUTE IMMEDIATE 'CREATE OR REPLACE VIEW v_t11 AS SELECT * FROM t11';
    END;
    anonymous block completed
    Elapsed: 00:00:00.069
    BEGIN
       p_etl_test_view;
    END;
    Error starting at line 13 in command:
    BEGIN
       p_etl_test_view;
    END;
    Error report:
    ORA-01031: insufficient privileges
    ORA-06512: at "OCCSS_ENTMT_HK_DEV_01.P_ETL_TEST_VIEW", line 4
    ORA-06512: at line 2
    01031. 00000 -  "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
               without the appropriate privilege. This error also occurs if
               attempting to install a database without the necessary operating
               system privileges.
               When Trusted Oracle is configure in DBMS MAC, this error may occur
               if the user was granted the necessary privilege at a higher label
               than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
               the required privileges.
               For Trusted Oracle users getting this error although granted the
               the appropriate privilege at a higher label, ask the database
               administrator to regrant the privilege at the appropriate label.
    Elapsed: 00:00:00.100
    The privileges I am having:
    SELECT   *
        FROM dba_sys_privs
       WHERE grantee = 'OCCSS_ENTMT_HK_DEV_01'
          OR grantee IN (SELECT granted_role
                           FROM dba_role_privs
                          where grantee = 'OCCSS_ENTMT_HK_DEV_01')
    ORDER BY 1;
    GRANTEE
    PRIVILEGE
    ADMIN_OPTION
    EXP_FULL_DATABASE
    ADMINISTER RESOURCE MANAGER
    NO
    EXP_FULL_DATABASE
    ADMINISTER SQL MANAGEMENT OBJECT
    NO
    EXP_FULL_DATABASE
    BACKUP ANY TABLE
    NO
    EXP_FULL_DATABASE
    CREATE SESSION
    NO
    EXP_FULL_DATABASE
    CREATE TABLE
    NO
    EXP_FULL_DATABASE
    EXECUTE ANY PROCEDURE
    NO
    EXP_FULL_DATABASE
    EXECUTE ANY TYPE
    NO
    EXP_FULL_DATABASE
    READ ANY FILE GROUP
    NO
    EXP_FULL_DATABASE
    RESUMABLE
    NO
    EXP_FULL_DATABASE
    SELECT ANY SEQUENCE
    NO
    EXP_FULL_DATABASE
    SELECT ANY TABLE
    NO
    OCCSS_ENTMT_HK_DEV_01
    CREATE DATABASE LINK
    NO
    OCCSS_ENTMT_HK_DEV_01
    CREATE TABLE
    NO
    OCCSS_ENTMT_HK_DEV_01
    DEBUG CONNECT SESSION
    NO
    OCCSS_ENTMT_HK_DEV_01
    SELECT ANY DICTIONARY
    NO
    SCB_SCHEMA_ROLE
    ALTER SESSION
    NO
    SCB_SCHEMA_ROLE
    CREATE CLUSTER
    NO
    SCB_SCHEMA_ROLE
    CREATE DIMENSION
    NO
    SCB_SCHEMA_ROLE
    CREATE INDEXTYPE
    NO
    SCB_SCHEMA_ROLE
    CREATE JOB
    NO
    SCB_SCHEMA_ROLE
    CREATE MATERIALIZED VIEW
    NO
    SCB_SCHEMA_ROLE
    CREATE OPERATOR
    NO
    SCB_SCHEMA_ROLE
    CREATE PROCEDURE
    NO
    SCB_SCHEMA_ROLE
    CREATE SEQUENCE
    NO
    SCB_SCHEMA_ROLE
    CREATE SESSION
    NO
    SCB_SCHEMA_ROLE
    CREATE SYNONYM
    NO
    SCB_SCHEMA_ROLE
    CREATE TABLE
    NO
    SCB_SCHEMA_ROLE
    CREATE TRIGGER
    NO
    SCB_SCHEMA_ROLE
    CREATE TYPE
    NO
    SCB_SCHEMA_ROLE
    CREATE VIEW
    NO

    BoopathyVasagam wrote:
    Thank you for your answer. So should I issue the below statement? (Since I dont have dba privs i couldn't test this)
    GRANT CREATE VIEW to P_ETL_TEST_VIEW;
    I doubt that above will prevent the error from being thrown.
    prior to running anonymous block again; just do as below
    SET ROLE NONE;
    doing so should result in same error being thrown when invoking
    BEGIN 
       p_etl_test_view; 
    END; 

  • How can i create datasource on apache server for ADF application?

    Hi All,
    i my use case i have created simple adf application using ADF BC and want to deploy on Apache server 6.x.
    So my question is that  how can i create Data Source i have goggling and find  two different way to do this.
    1. write following line of code on apache server conf/Context.xml file.
    <Resource name="jdbc/TestDB" auth="Container"
                  type="javax.sql.DataSource"
                   driverClassName="oracle.jdbc.OracleDriver"
                  url="jdbc:oracle:thin:@localhost:dst"
                  username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
                  maxWait="-1"/>
    but when i have used this way i got following exception.
    org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection
    check link-
    https://forums.oracle.com/thread/2564233
    2. write following line of code apache conf/Server.xml file
    <GlobalNamingResources>
        <!-- Editable user database that can also be used by
             UserDatabaseRealm to authenticate users
        -->
        <Resource name="UserDatabase" auth="Container"
                  type="org.apache.catalina.UserDatabase"
                  description="User database that can be updated and saved"
                  factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
                  pathname="conf/tomcat-users.xml" />
    <Resource name="jdbc/TestDB" auth="Container"
                  type="oracle.jdbc.pool.OracleDataSource"
                  description="User database that can be updated and saved"
                  driverClassName="oracle.jdbc.driver.OracleDriver"
                  factory="oracle.jdbc.pool.OracleDataSourceFactory"
                  url="jdbc:oracle:thin:@//172.31.43.207:1521:dst"
                  username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
                  maxWait="-1"   />
      </GlobalNamingResources>
    and add this line in context.xml file inside <context> tag
    <ResourceLink global="jdbc/TestDB" name="jdbc/TestDB" type="oracle.jdbc.pool.OracleDataSource"/>
    but when i have run application i have got following error
    log-
    javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
      at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
      at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
      at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
      at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
      at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
      at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
      at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
      at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
      at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
      at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
      at java.lang.Thread.run(Thread.java:662)
    Aug 2, 2013 5:17:21 PM org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
      at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
      at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
      at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
      at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
      at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
      at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
      at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
      at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
      at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
      at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
      at java.lang.Thread.run(Thread.java:662)
    so what is the solution how to create datasource on apche server which suitable for adf application?
    when i test data source using  following code used 1. way as i mentioned above  its running fine bt not for second.
    <%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
    <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
    <sql:query var="rs" dataSource="jdbc/TestDB">
    select empname from pay_emphdr where empcd='JK1306'
    </sql:query>
    <html>
      <head>
        <title>DB Test</title>
      </head>
      <body>
      <h2>Results</h2>
    <c:forEach var="row" items="${rs.rows}">
        Foo ${row.empname}<br/>
    </c:forEach>
      </body>
    </html>
    please help me. it is very urgent.
    thanks in Advance
    Manish

    Hi Lindalnci
    i have already tried  this tutorial and in my post i have defined first way to do using this procedure.
    in that case i have got following exception as i have mentioned above
    org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection

  • Table for creating  datasource .

    Hi Experts
    I am trying to create a report.
    The report output is as follows
    Companycode | business partner type | Business partner No | vendor no | customer no |cheque no | cheque date | cheque amount | check status | bank account no |.
    Now to create datasource for fetching the above data I am trying to find the tables . All the data related to cheque is present in the table PAYR but from where can I get business partner number and business partner type .
    Any clues ?

    Hi,
    If you are extracting data from CRM system then refer the below given tables for required information,
    - BUT000 : BP: General data - Contains Business Partner Number, Partner Category, Partner Type, First Name, Last Name et
    [http://wiki.sdn.sap.com/wiki/display/CRM/CRM+Tables]
    Regards,
    Durgesh.

  • How to create files with read/write privileges for everyone?

    I have two iMacs 7,1 (one with Snow Leopard and the other with Mountain Lion) in a local area wireless network.
    I have shared the "documents" folder in the Snow Leopard iMac in order to have files available to the other iMac. The folder has read/write privileges for everyone.
    When I create a new file in the shared "Documents" folder (for example a new Open office document, or a Keynote presentation) this file is by default "read/write" for the Administrator but only "read" for all the other users, so when I try to open it from the other iMac, I am informed that the file is "read only".
    I can obviously change the privileges of the file in the information window, but I have to do on a file per file basis and this takes too long.
    Is it possible to change settings in order to create files which are always "read/write" for everyone?
    And, secondly, since I have several existing files whose privileges I should manually change one by one, is it possible to make global changes of their privileges?
    Thanks in advance
    Best regards

    couple of different changes - 1st, if you want to share folders, doing your whole documents folder is not the best way.  Since both your computers can handle AidDrop, that's what I would recommend - http://osxdaily.com/2011/11/14/how-to-use-airdrop-in-mac-os-x/ - as it create an instant Ad-Hoc network between the two computers and then let's it done. 
    A second possibility that may not be what you're looking for, is to use google drive or some similay cloud sharing app to sync the documents back and forth.  both of these solutions will transfer the files well, but the airdrop may be simplest

Maybe you are looking for