Table for creating datasource .
Hi Experts
I am trying to create a report.
The report output is as follows
Companycode | business partner type | Business partner No | vendor no | customer no |cheque no | cheque date | cheque amount | check status | bank account no |.
Now to create datasource for fetching the above data I am trying to find the tables . All the data related to cheque is present in the table PAYR but from where can I get business partner number and business partner type .
Any clues ?
Hi,
If you are extracting data from CRM system then refer the below given tables for required information,
- BUT000 : BP: General data - Contains Business Partner Number, Partner Category, Partner Type, First Name, Last Name et
[http://wiki.sdn.sap.com/wiki/display/CRM/CRM+Tables]
Regards,
Durgesh.
Similar Messages
-
Is it possible to automate the load of setup tables for LIS datasources?
Hello,
For LIS datasources, eg. 04 (shop floor control), once the production confirmation is done, we have to manually run the transaction OLI4BW to load the setup tables before extracting data to BW. Is there a way to automate the load of setup tables?
Regards,
SurajHi,
Yes we can !
Create variants for small ranges and scheduled all of them at a time. So that, loading will be completed soon.
Thanks,
Saru -
Hi experts,
I want to create a generic data source related to purchasing for these fields.Anyone please provide me exact tables of these fields
1.MWSKZ Tax code
2.KBETR Condition amount
3.KWERT Condition Value
4.SORT1 Search Term
5.SORT2 Search Term
6.VALVT Value date (Check date)
7.QBSHB Withholding tax amount in doc cur
8.DWERT Differnce value
9.FRBNR No. of Bill of lading at time of GR
10.GROES Size / dimension
11.WT_QSSHB Withholding tax amount in doc.currency
12.WT_WITHCD Witholding tax code
13.Condition Type.
Atleast if anone give tables for some fields is also helpful.
Regards,
Nishuv.Hi
Table-Field
EKPO-MWSKZ
KOMV-KBETR
KOMV-KWERT
BSEG-QBSHB
MKPF-FRBNR
WITH_ITEM or BSEG-WT_QSSHB
LFBW- WT_WITHCD
MARA-GROES
Condition Type : KONP
Also check the following Link :
http://help.sap.com/saphelp_nw70/helpdata/en/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/content.htm
http://www.abap.es/Descargas/TAB%20-%20Relacion%20de%20las%20tablas%20por%20modulos.PDF
Im unable to find VALVT and DWERT... kindly check the name once....
Hope thia helps you...
Regards,
Debjani....
Edited by: Debjani Mukherjee on Sep 7, 2008 7:07 AM
Edited by: Debjani Mukherjee on Sep 7, 2008 7:25 AM
Edited by: Debjani Mukherjee on Sep 7, 2008 12:20 PM -
R/3 table for a datasource?
Hello,
how to know the corresponding r/3 table for a business content datasource?
(if i need to check the data for the same on the r/3 side)
regards,
Message was edited by: Abhijit BhaleraoHi dear,
welcome on board!
Here are what do you need:
0ec_pca_1 (from GLPCT)
http://help.sap.com/saphelp_nw04/helpdata/en/de/46663758459166e10000009b38f8cf/content.htm
0co_om_opa_6 (from COVP, COEP, COBK and AUFK)
http://help.sap.com/saphelp_nw04/helpdata/en/86/b35a259a03fe42b29d1437a7fba1c6/content.htm
Remember that help on line is always the best (first to check) source of info !
Please don't forget to reward the answers (here it's THE way to say thanks...)
Bye,
Roberto -
How to get Tables for the datasource
Hi ,
When i have a datasource,How do i get to know..What are the table for that data source.
Thanks,
Kiran.Hi,
In ECC:
1. goto RSO2 and give datasource name and display, if it is SAP defined datasource it will display some warning message in Status bar, so again press Enter Button and then see teh datasource there you can fine FM, Table/VIiew, InfoSet like that, in this way you can fine, if it is build on Function Module then you need to see that FM and debug and find. For LO dataSources you can fine in LBWE.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Thanks
Reddy -
How to know the tables for a datasource like 2lis_17_order
Hi,
How to know the tables for a data source like 2lis_17_order, i have checked in Extract structure of that data source, only fields are visible but how will i know that these fields are getting extracted from so and so tables?
pls respond. thanks in advanceHi,
Go to RSO2 at source system, Enter data source and click on display.
if its table based then you can see table name there it self.
if its view based then notedown the view name and go to SE11, provide view and click on display. see joined table names there.
Thanks -
What are the tables for PS datasource.
HI ALL,
I am new to PS module , I got the Data source , infocube and details from help.sap.com
but i want to know the exact flow on the r3 side.
which table values come to data source .
for eg : 0ps_dat_ntw is the data source for network dates ,so where in r3 side the data is maintained, which table will have this.
As in lo-cockpit we have LBWE where we can see the communication structure , similarly what is there for PS module.
MY few data source are :
0ps_dat_ntw ,
0ps_dat_nwa ,
0ps_dat_wbs ,
0ps_dat_prj ,
0ps_wbs_eva ,
0ps_ord_eva ,
0ps_ntw_eva.
Thanks In Advance.Hi,
You aren't so far away from information required.
URL for BC PS:
http://help.sap.com/saphelp_nw04/helpdata/EN/b9/60073c0057f057e10000000a114084/frameset.htm
Open Folder "DataSources",and go through DSs.
Acoording to your example:
http://help.sap.com/saphelp_nw04/helpdata/EN/ea/5fcb39722a8504e10000000a114084/content.htm
Required information is provided in columns "Table of Origin" and "Field in Table of Origin"
Regards
Joe -
How to access the Microsoft Dynamics database tables for creating a DW
Hi all,
I m trying to build a POC for the manufacturing industry (Dairy Industry).
Hence I'm trying to install Microsoft Dynamics and access the tables available its OLTP and create a warehouse.
Please let me know how we access the database tables of Microsoft Dynamics to do etl (using any etl tool).
Then i would be creating reports and dashboard using OBIEE 11G.
I thought of getting help before installing microsoft dynamics so that i can install the necessary components to achieve the same.
Please let me know the necessary things i would need to do.
Thanks
JaanHi,
I think this can be possible with microsoft ssis etl tool.
Thanks,
Navin Kumar Bolla -
Which R/3 Tables for these datasources?
Can someone tell me which R/3 tables the following data sources go against? If not, is there an easy way to tell?
<b>PS</b>
0PS_CSH_NWA
0PS_CSH_WBS
0PS_NWA_EVA
0PS_WBS_EVA
<b>CO</b>
0CO_OM_CCA_1
0CO_OM_CCA_4
0CO_OM_CCA_9
0CO_OM_NWA_1
0CO_OM_OPA_1
0CO_OM_OPA_1
0CO_OM_OPA_6
0CO_OM_WBS_2
0CO_OM_WBS_3
0CO_OM_WBS_6
Thanks Gurus
~NathanielCO
0CO_OM_CCA_1 - COSP and COSS
0CO_OM_CCA_4 - COSR
0CO_OM_CCA_9 - COVP(COEP and COBK)
0CO_OM_NWA_1 -
0CO_OM_OPA_1 - COSP and COSS
0CO_OM_OPA_6 - COVP
0CO_OM_WBS_2 - BPGE and BPJA
0CO_OM_WBS_3 - BPGE and BPJA
0CO_OM_WBS_6 COVP
PS
0PS_CSH_NWA -
0PS_CSH_WBS
0PS_NWA_EVA
0PS_WBS_EVA
For all these check the link below I believe PS datasources are determined by lot of other factors configuration
http://help.sap.com/saphelp_bw33/helpdata/en/f3/12c83956852b51e10000000a114084/frameset.htm
Message was edited by:
voodi -
Table for Created and Changed Requests...
Dear all,
I need a program to fetch the created date and changed date for given
1. Tcodes
2. tables
3. structures
4. domains
5. bapi
6. badi
7. smartforms
8. scripts
etc.
Can you plz suggest me from which table i could get all these details.
I tried TRDIR and i have got the dates for reports.
Regards
Sivaprasad...
best suggestions will be rewarded with points.
Edited by: Sivaprasad ML on Aug 4, 2008 2:20 PMHi,
Check this out
RSRREPDIR Directory of all reports
TADIR Directory of Repository Objects
TCDIR Control Directory
TDDIR Active field exits for data elements
TFDIR Function Module
Thanks,
Muthu -
How to find DB tables for the datasource
Hi Experts,
I have the requirement to check the DB tables which supplies data to datasource.Is there any provision has been given to check it at BW side.If not what is the provision provided at R/3 side.
Kindly do the needful.
Regards
KumarHi,
you can always check the queries wich are executed during a session by keeping your trace on. goto ST05, make the trace on for ur user name and then run the extraction. Goback to ST05 and switch the trace off. and in the log, ull see all the SQLs which are executed. In this you will get your table name as well..
Dont forget to stop ur trace as its a overhead on the application server
Sriram -
Tables for creating a new sales order with reference to another
Hi Experts
In ABAP, how can identify that I'm creating a new sales order with reference to another in the userexit read_document??, In which tables is this information??.
Thanks
RegardsIn Table VBFA there are two fields
a) Preceding Document and
b) Subsequent Document category
Based on the above two fields, you can conclude that sale order is created with reference to a preceding document.
thanks
G. Lakshmipathi -
Tables for standard datasource - Fundas Management, Budget Control System
Hi Experts
There are 2 standard datasources 0PU_IS_PS_42 & 0PU_IS_PS_31 which are used bu our client which has all the budget information. i need to know the tables from where the data is populating.
Can anyone please give me the table names. Its urgent.
Thanks in Advance.
Edited by: Jasmine G on Jul 1, 2008 6:42 PMHi Experts
There are 2 standard datasources 0PU_IS_PS_42 & 0PU_IS_PS_31 which are used bu our client which has all the budget information. i need to know the tables from where the data is populating.
Can anyone please give me the table names. Its urgent.
Thanks in Advance.
Edited by: Jasmine G on Jul 1, 2008 6:42 PM -
Do I need to install Oracle database 12c on PC to create tables for Weblogic server
Hi,
I am new to WebLogic and I am following a book Java EE Development
with Eclipse published by PACKT Publishing to learn Java EE. I have installed Oracle Enterprise Pack for Eclipse
on the PC and I am able to log into the WebLogic Server
Administration Console and set up a Data Source. However the next step is to create
tables for the database. The book says that the tables can be
created using SQL script run from the SQL command line.
I cannot see any way of inputting SQL script into the WebLogic
Server Admistration Console. Aslo there is no SQL Command line
in DOS.
I have put a previous question on the Oracle Forum about the above and I was advised to use SQL Plus
to create the tables for the weblogic server but no mention was made of installing Oracle database.
I have downloaded InstantClient SQL Plus and Instantclient Basic on a PC and
put the files into the same directory C:\SQLPlus but now I am having a problem in that it is
looking for a username and password when I run the sqlplus.exe file.
Now I assume that I need to have an installation of Oracle databse on the
PC so as to be able to use SQL Plus. Am I correct in this or can I create tables for the
datasource in weblogic without an Oracle database?
Thanks in advance for your help. BrianYou should install it separately and also need to change the OBIEE's user.sh to tell it where is your Oracle client installed.
-
Creating DataSource in Visual Administrator for Oracle DataBase
Hi Experts,
I want to connect to external Orcle Database from my application(EJbs,Web Dynpro) where i need to call some stored Procedures.for that one i want to create
DataSource in Visual Administrator.
i got some doubts for creating DataSource in Visual Administrator
1.which SQL engine i need to use(open SQL or Native SQL or Vendor SQL)
2.shall i need to deploy any additional drivers(jars) in WAS
any help will be appriciated
thanks in Advance
With Regards
NaiduI can see you are still looking for answeres, I have included more explicit examples of how to connect to an Oracle DB via an SAP Visual Administrator Datasource.
First the DB has to exist and you should be able to connect to it using some other application to test with like Toad for example.
Secondly for installing the Data Source via Visual Administrator you will need to verify that you have a an Database Driver defined in the Visual Admin first, if not define one. Defining an oracle driver is as simple as providing an alias name for the driver and supplying the Oracle classses.jar, or ojdbc14.jar. Click Create Driver in the Visual Admin enter an alias name and click Browse to find one of the jar files mentioned above. Once done click the diskette looking icon to save.
After the above 2 steps you can either define the Datasource manually in the Visual Administrator or Import the datasource via an xml file as defined below.
I have included a mock datasource.xml file which you can copy and paste and more or less use as a reference.
<b>Note</b>
With Oracle I have always sected <b>Vender SQL</b> as I can not get any of the other selections to work properly when connecting to our Oracle DB. I have also used this approach to connect to Oracle 8 databases as well. We have been using these Datasources in production for many years without incident.
Variables Defined
<b> data-source-name </b> PORTFOLIODS is the name we use to look up the Datasource via JDBC.
<b>driver-name </b> The name that you have defined for the Oracle jar libary you added as a Database Driver via the Visual Administrator.
<b> url </b> The "Type 3" Network URL pathname to the Oracle DB.
<b> user </b> The account you want to log in as.
<b> password </b> The account password for the DB.
Cheers,
Alex
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE data-sources SYSTEM 'data-sources.dtd'>
<data-sources>
<application-name>chep.com/JDBCConnectior_PORTFOLIODS.xml</application-name>
<data-source>
<data-source-name>PORTFOLIODS</data-source-name>
<driver-name>Oracle9i</driver-name>
<max-connections>25</max-connections>
<max-time-to-wait-connection>60</max-time-to-wait-connection>
<sql-engine>vendor_sql</sql-engine>
<jdbc-2.0>
<cpds-class-name>oracle.jdbc.pool.OracleConnectionPoolDataSource</cpds-class-name>
<object-factory>oracle.jdbc.pool.OracleDataSourceFactory</object-factory>
<properties>
<property>
<property-name>url</property-name>
<property-value>jdbc:oracle:thin:@usdenedu169.cnn.com:1521:ORCL</property-value>
</property>
<property>
<property-name>user</property-name>
<property-value>LogisticsApplication</property-value>
</property>
<property>
<property-name>password</property-name>
<property-value>logisticsAppPwd</property-value>
</property>
</properties>
</jdbc-2.0>
</data-source>
</data-sources>
Maybe you are looking for
-
How to Change text of link in SRM
Hi All, How to Change text of link in SRM . The Link is in leftside of the screen in webportal. I needs to change the text of link ' Shop' , 'Check Status' and 'Confirm Goods / Services. Kindly helpout me.
-
Querying last element in a dimension based on another level in the same dimension using MDX
Summary: I need to write an MDX that returns the last date available in the level in the date dimension based for each month in the same dimension. Details: i have the a dimension which has the following levels. Dim_Date : Date (key) , Month (name
-
IPad (III) dies 4 weeks after Applecare ends. Has anyone experienced this?
One of my iPad (III)'s "bricked" when I proceeded to update to the latest version of iOS 7. It just displays an iTunes logo and a picture of the adapter plug. Wjen I plugged it to my MBP and iTunes, I got the message that the iPad must be "restored"
-
SF300-24p Q-in-Q - Changing from vlan 4095
I have a Cisco SF300-24P deployed at a customer prem running only a couple VLAN's - 1 customer related and 1 for management. Recently the customer inquired about changing his connection to Q-in-Q. I have changed the interface type to customer but t
-
hello everyone could anyone help me with this problem... org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/core cannot be resolved in either web.xml or the jar files deployed with this application org.apache.jaspe