Create dynamic ID for component / component names in portlet
Hi,
I developed a JSF and IBM Portal API based portlet which runs on Websphere Portal Server 5.0.2.2. Everything's fine, if I have just one instance of my portlet on the page. If I have more than one, problems arise...
This is due to the component IDs which are the same for each portlet instance. I blame IBMs Gerneric faces portlet for this behavoir, but this doesn't solve my problem ;-)
So I need to create unique IDs for the components for each portlet instance on a page - which means at runtime.
I thought of a custom component which is generates a unique random ID. The final structure of a page (or JSF component tree) with multiple instances of my portlet should look like this
root
|
+ mycomponent id=3454 \
| +- form id=form1 | - Portlet instance A
| +- input id=textinput1 /
|
+ mycomponent id=7656 \
+- form id=form1 | - Portlet instance B
+- input id=textinput1 / With this kind of component tree I could distinguish the form in portlet instance A and instance B (for A it would be 3454:form1 and for B 7656:form1)...
Because there's no real servlet or portlet-code which can be altered, the points to interfere are quite limited. As mentioned above, all general request handling and forwarding to JSPs is handled by the "generic faces portlet"...
The first point where my own code could be executed is in a custom component on the JSP or the "onPageLoad"-Event of hx:scriptcollector (which is an IBM extension to the standard JSF components).
Have you any suggestions or best practices how to solve this problem?
TIA,
ulkbold
Did you ever come up with a way to workaround this problem. This problem just bit me over the weekend.
Similar Messages
-
Exchange 2010 SP3 Create Dynamic DL for Direct Reports
I am not sure this is possible but if there is a will there is a way I guess.
System: Exchange 2010 SP3 on Windows Server 2008 R2
I am trying to see if there is a way to create dynamic DLs for Manager(s) direct reports.
Example: Manager has 5 people that report directly to them, is there a way to make an dynamic email distribution list that will poll the direct reports as people leave or hired.
I know I can create one manually but some depts. may have high turnover rates which increase overhead so I am just trying to simplify the process. I of course googled my question but not getting the results I intended.
Thanks.hi,
as from above i understand you are asking about creating an custom attribute and then referencing them .. if yes please check below command
Get-Mailbox -OrganizationalUnit Sales | Set-Mailbox CustomAttribute1 "SalesOU"Now you can create an e-mail address policy for all recipients that have the CustomAttribute1 property that equals SalesOU, as shown in this example.
New-EmailAddressPolicy -Name "Sales" -RecipientFilter { CustomAttribute1 -eq "SalesOU"} -EnabledEmailAddressTemplates "SMTP:%s%[email protected] check this.. http://technet.microsoft.com/en-us/library/ee423541%28v=exchg.150%29.aspx
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin -
Salmple at How to Create Dynamical Object for RTTC
Hi all, I need a sample at How to Create Dynamical Object for RTTC.
you can help me?.Hello Martinez,
I have attached a sample for structure types. With the Where-Used-List on the Create() Method of the various RTTC classes one may find more samples. If you meant with object on OO Type then it is to mention that this is not possible yet.
Regards
Klaus
PROGRAM sample.
DATA: sdescr1 TYPE REF TO cl_abap_structdescr,
sdescr2 TYPE REF TO cl_abap_structdescr,
tdescr1 TYPE REF TO cl_abap_tabledescr,
tdescr2 TYPE REF TO cl_abap_tabledescr,
tref1 TYPE REF TO data,
tref2 TYPE REF TO data,
comp TYPE abap_component_tab,
wa TYPE t100,
xbuf TYPE xstring.
FIELD-SYMBOLS: <tab1> TYPE table,
<tab2> TYPE table.
sdescr1 ?= cl_abap_typedescr=>describe_by_name( 'T100' ).
comp = sdescr1->get_components( ).
sdescr2 = cl_abap_structdescr=>create( comp ).
tdescr1 = cl_abap_tabledescr=>create( sdescr2 ).
tdescr2 = cl_abap_tabledescr=>create( sdescr2 ).
CREATE DATA: tref1 TYPE HANDLE tdescr1,
tref2 TYPE HANDLE tdescr2.
ASSIGN: tref1->* TO <tab1>,
tref2->* TO <tab2>.
wa-sprsl = 'E'. wa-arbgb = 'SY'. wa-msgnr = '123'. wa-text = 'first text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'D'. wa-arbgb = 'SY'. wa-msgnr = '456'. wa-text = 'second text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'D'. wa-arbgb = 'XY'. wa-msgnr = '001'. wa-text = 'third text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'D'. wa-arbgb = 'ZZ'. wa-msgnr = '123'. wa-text = 'fourth text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'E'. wa-arbgb = 'SY'. wa-msgnr = '123'. wa-text = 'ABAP is a miracle'. INSERT wa INTO TABLE <tab1>.
EXPORT tab = <tab1> TO DATA BUFFER xbuf.
IMPORT tab = <tab2> FROM DATA BUFFER xbuf.
LOOP AT <tab2> INTO wa.
WRITE: / wa-sprsl, wa-arbgb, wa-msgnr, wa-text.
ENDLOOP. -
Create Dynamic variant for date field
Hello all,
I need to have the current month year displayed in my selection screen in format MM.YYYY and the field is of type SPMON (Period to analyze - month).
and while saving the variant it is showing only 'T' (entries from TVARVC table) in "selection variable" field and not showing 'D' (Dynamic selection) for the above field.
So,please help me in resolving this issue.
Thanks in advance.hi
good
go through this code,i hope this ll help you to create the dynamic variant.
Please find the sample using RS_CREATE_VARIANT (FM).
It make use of other FM also , just have a look .
Hope this may help you.
REPORT ZEXAMPLE.
DATA: JVARI_DESC LIKE VARID,
RC LIKE SY-SUBRC,
VARIANT_TEXT LIKE VARIT-VTEXT,
JVT LIKE VARIT OCCURS 0 WITH HEADER LINE,
SELPA LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
PARMS LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
OBJS LIKE VANZ OCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VAR LIKE RSVAR-VARIANT. "NAME OF VARIANT
JVARI_DESC-REPORT = SY-REPID.
JVARI_DESC-VARIANT = P_VAR.
JVARI_DESC-ENAME = 'EXAMPLES'.
JVT-REPORT = SY-REPID.
JVT-VARIANT = P_VAR.
JVT-LANGU = SY-LANGU.
JVT-VTEXT = 'FUNCTION EXAMPLES'.
APPEND JVT.
CLEAR SELPA.
SELPA-SIGN = 'I'.
SELPA-OPTION = 'EQ'.
SELPA-KIND = 'P'.
SELPA-SELNAME = 'P_VAR'.
SELPA-LOW = P_VAR.
APPEND SELPA.
CHECK IF VARIANT EXISTS
CALL FUNCTION 'RS_VARIANT_EXISTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
R_C = RC
EXCEPTIONS
NOT_AUTHORIZED = 1
NO_REPORT = 2
REPORT_NOT_EXISTENT = 3
REPORT_NOT_SUPPLIED = 4
OTHERS = 5.
IF RC = 0 AND SY-SUBRC EQ 0.
DELETE OLD VARIANT
CALL FUNCTION 'RS_VARIANT_DELETE'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
FLAG_CONFIRMSCREEN = 'X'
EXCEPTIONS
NOT_AUTHORIZED = 1
NOT_EXECUTED = 2
NO_REPORT = 3
REPORT_NOT_EXISTENT = 4
REPORT_NOT_SUPPLIED = 5
VARIANT_LOCKED = 6
VARIANT_NOT_EXISTENT = 7
NO_CORR_INSERT = 8
VARIANT_PROTECTED = 9
OTHERS = 10.
IF SY-SUBRC NE 0.
WRITE: 'UNABLE TO DELETE VARIANT:', P_VAR ,'STATUS=', SY-SUBRC.
EXIT.
ELSE.
WRITE:/ P_VAR, 'DELETED'.
ENDIF.
ELSE.
WRITE:/ P_VAR, 'DOES NOT EXIST'.
ENDIF. " ALREADY EXISTS
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
CURR_REPORT = JVARI_DESC-REPORT
CURR_VARIANT = P_VAR
VARI_DESC = JVARI_DESC
TABLES
VARI_CONTENTS = SELPA
VARI_TEXT = JVT
EXCEPTIONS
ILLEGAL_REPORT_OR_VARIANT = 1
ILLEGAL_VARIANTNAME = 2
NOT_AUTHORIZED = 3
NOT_EXECUTED = 4
REPORT_NOT_EXISTENT = 5
REPORT_NOT_SUPPLIED = 6
VARIANT_EXISTS = 7
VARIANT_LOCKED = 8
OTHERS = 9.
IF SY-SUBRC EQ 0.
WRITE:/ 'VARIANT', P_VAR, 'CREATED FOR PROGRAM', JVARI_DESC-REPORT.
ELSE.
WRITE:/ 'VARIANT', P_VAR, 'NOT CREATED FOR PROGRAM', JVARI_DESC-REPORT.
EXIT.
ENDIF.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
TABLES
VALUTAB = PARMS
OBJECTS = OBJS
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3.
IF SY-SUBRC NE 0.
WRITE : / 'ERROR READING VARIANT CONTENTS.'.
ELSE.
CALL FUNCTION 'RS_VARIANT_TEXT'
EXPORTING
LANGU = SY-LANGU
CURR_REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
V_TEXT = VARIANT_TEXT.
WRITE:/ 'VARIANT DESCRIPTION:', VARIANT_TEXT.
LOOP AT PARMS.
CHECK PARMS-LOW NE SPACE OR PARMS-HIGH NE SPACE.
READ TABLE OBJS WITH KEY NAME = PARMS-SELNAME.
WRITE : /2 PARMS-SELNAME, OBJS-TEXT,
45 PARMS-KIND,
PARMS-SIGN,
PARMS-OPTION,
PARMS-LOW,
PARMS-HIGH.
NEW-LINE.
ENDLOOP.
SKIP.
ENDIF.
some other approach....
This function module selects the Selection Screen contents
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = sy-repid
TABLES
selection_table = loc_int_tab
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE i000 WITH 'Error in RS_REFRESH_FROM_SELECTOPTIONS'(029).
LEAVE LIST-PROCESSING.
ENDIF.
Craete the variant VAR1
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
curr_report = sy-repid
curr_variant = wf_variant
vari_desc = loc_varid
TABLES
vari_contents = loc_int_tab
vari_text = loc_varit
EXCEPTIONS
illegal_report_or_variant = 1
illegal_variantname = 2
not_authorized = 3
not_executed = 4
report_not_existent = 5
report_not_supplied = 6
variant_exists = 7
variant_locked = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE i000 WITH 'Error while creating dynamic variant'(028).
LEAVE LIST-PROCESSING.
ENDIF.
reward point if helpful.
thanks
mrutyun^ -
Adobe Form: Dynamic vlaue for Include text name. Script Coding
Hi,
Situtation:
Need to print an 'Include Text' in the Adobe form.
The key texname for the include name is dynamic - invoice number + position number.
I have created a Global Data variable item_textkey and assigned it to the inculde textname in 'Context'.
The Problem is I dont know how or where to assign a value to this global data variable at runtime, so the right include text is pulled up.
I tried the code in the "FormCalc' of the text field. But it doesnt work.
$record.ITEM_TEXTKEY = Concat ($record.IS_VBDKR.VBELN, $record.IS_VBDPR.POSNR)Try the following in initialize event of the main subform
$record.ITEM_TEXTKEY.rawValue = Concat ($record.IS_VBDKR.VBELN.rawValue, $record.IS_VBDPR.POSNR.rawValue)
Chintan -
Method t create dynamic structure if the field name contains space
HI all,
I am creating a dynamic internal table. Everything id fine but when creating dynamic structure if field name contains space its giving me dump.Can you please suggest me any other methos which takes space in the field name.
Iam using the following method:
gr_struct_typ ?= cl_abap_structdescr=>create( p_components = gt_component ).
In the gt_component i have one of the field with space like ( RU STAND) and its giving error.
Any help will be appreciated.
thanks
Suku.Hello Sukumar
If the space in the fieldname is a mistake then you could simply use:
CONDENSE ld_fieldname NO-GAPS.
However, I guess your fieldname should contain this space:
>...suggest me any other methos which takes space in the field name.
>
Well, have you ever seen a field or column name in SAP standard containing a space in its name???
Regards
Uwe -
Creating dynamic id for an input textbox?
I have a datatable in my jsf page in which I need to create an input textbox that must have dynamic values for id attribute and not the hard coded one. What is the possible way to generate that??
Not directly. But why would you? Don't you see a pattern in the generated ID's? Did you check the generated HTML output? If this problem is Javascript related, are you familiar with the 'this' reference?
-
How to create function module for getting customer name
Hi Experts,
How to create function module? when in import parameter kunnr values to be passed it must give name1 details according to the customer number...
how to write the logic in source code....
Regards,
Thiru. R1. First of all create function group.
2. Create function module using this function group.
3. If only one kunnr is needed at a time, create import parameter for it. But if many kunnr to be entered at a time,use table.
4. Fetch name1 for each kunnr from KNA1 table.
"->> if many kunnr
if not t_kunnr[] is initial.
select kunnr as kunnr name1 as name1
into table t_kunnr_name1
from kna1
for all entried in table t_kunnr
where kunnr = t_kunnr-kunnr.
endif.
sort t_kunnr_name1 by kunnr name1.
delete adjacent duplicates from t_kunnr_name1 comparing kunnr name1.
table t_kunnr_name1 will contain kunnr and its name1.
I hope logic is clear for you now.
Regards,
Aparna -
How create dynamic URL for every row shown in the report?
Hi,
Iam new to this Application. I created one interactive report to find the number of bugs logged for every product and its sub component for past one year. The report will look like below structure in the application.
Product Subcomponent Total
P1 S1 10
P2 S2 4
P2 S21 15
Now i want to pick the value of Prouct and sub component for every row dynamiaclly and want to generate the URL with the conditions and make it as hyperlink for the Total Column.
Iam able to make hyperlink for the Total column using the edit options for the total attribute, but it is opening the same page for all the rows in the total column. I want to generate dynamic URL by picking the value prodcut and sub componenet dynamically from the report for every row and want to make it as hayperlink for every row individually.
Please tell me how to do this?
Please revert back if you are not clear. Appericiate for your quick help.Hello <unknown user>,
So you already set the Column Link attributes for your Total column. Should all links go to the same page, but with different parameters (ProductID, SubcompID)? Or to another page? And how can you determine that page?
Assuming you'll go to a sort of detail page or form:
Target = [Page in this app]
Page = <your target page no>
Item1 = <ProductID field in target page>
Value = #PRODUCTID#
Item2 = <SubcompID field in target page>
Value = #SUNCOMPID#
(you can use the ' flashlight' for getting the correct values)
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-) -
How to create Dynamic Selection List containg file names of a directory?
Hi,
I need a Selection List with a Dynamic List of Values containing all file names of a particular directory (can change through the time).
Basically, I need an Iterator over all file names in a directory, which could be used for Selection List in a JSF form.
This iterator has nothing to do with a database, but should get the names directly from the file system (java.io.File).
Can anybody tell me how to create such an iterator/selection list?
I am working with JDeveloper 10.1.3.2, JSF and Business Services.
Thank you,
IgorCreate a class like this:
package list;
import java.io.File;
public class fileList {
public fileList() {
public String[] listFiles(){
File dir = new File("c:/temp");
String[] files = dir.list();
for (int i = 0; i < files.length; i++) {
System.out.println(files);
return files;
Right click to create a data control from it.
Then you can drag the return value of the listFiles method to a page and drop as a table for example.
Also note that the Content Repository data control in 10.1.3.2 has the file system as a possible data source. -
How to create Dynamic prompts for a field at run time
HI all
I have a table which has 2 columns name attribute1 and attribute1_meaning.
Attribute1_meaning is the the meaning of attribute 1.
ex if attribuite1 is 500.. attribute1_meaning tells us if its MHz. RAM or whatever.
So IN my form I want to display the prompt of attribute1 as the value attribute1_meaning
Is there a way to do this ?
thanksIt also depends on your form layout. Francois' solution works if you only display one record. If you display multiple records this won't work, since an item can only have one prompt at a time. There is no set_item_instance_property for the prompt.
In that case you can create two fields attribute1 and attribute1_meaning. You can set the visual attribute of field attribute1_meaning to look like a normal prompt. -
How to create dynamic strcture for a interrnal table
first i created one internal table . with five fields . suppose i want add two more fields in internal table.
what is the code for the this . if any one konowREPORT ZTEST05.
PARAMETERS dbtab TYPE tabname DEFAULT 'SPFLI'.
TYPE-POOLS rsds.
DATA tadir_wa TYPE tadir.
DATA selid TYPE rsdynsel-selid.
DATA field_tab TYPE TABLE OF rsdsfields.
DATA table_tab TYPE TABLE OF rsdstabs.
DATA table LIKE LINE OF table_tab.
DATA cond_tab TYPE rsds_twhere.
DATA cond LIKE LINE OF cond_tab.
DATA dref TYPE REF TO data.
DATA alv TYPE REF TO cl_salv_table.
FIELD-SYMBOLS <table> TYPE STANDARD TABLE.
SELECT SINGLE *
FROM tadir
INTO tadir_wa
WHERE pgmid = 'R3TR' AND
object = 'TABL' AND
obj_name = dbtab.
IF sy-subrc <> 0.
MESSAGE 'Database not found' TYPE 'I' DISPLAY LIKE 'E'.
LEAVE PROGRAM.
ENDIF.
table-prim_tab = dbtab.
APPEND table TO table_tab.
CALL FUNCTION 'FREE_SELECTIONS_INIT'
EXPORTING
kind = 'T'
IMPORTING
selection_id = selid
TABLES
tables_tab = table_tab
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE 'Error in initialization' TYPE 'I' DISPLAY LIKE 'E'.
LEAVE PROGRAM.
ENDIF.
CALL FUNCTION 'FREE_SELECTIONS_DIALOG'
EXPORTING
selection_id = selid
title = 'Free Selection'
as_window = ' '
IMPORTING
where_clauses = cond_tab
TABLES
fields_tab = field_tab
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE 'No free selection created' TYPE 'I'.
LEAVE PROGRAM.
ENDIF.
READ TABLE cond_tab WITH KEY tablename = dbtab INTO cond.
IF sy-subrc <> 0.
MESSAGE 'Error in condition' TYPE 'I' DISPLAY LIKE 'E'.
LEAVE PROGRAM.
ENDIF.
CREATE DATA dref TYPE TABLE OF (dbtab).
ASSIGN dref->* TO <table>.
TRY.
SELECT *
FROM (dbtab)
INTO TABLE <table>
WHERE (cond-where_tab).
CATCH cx_sy_dynamic_osql_error.
MESSAGE 'Error in dynamic Open SQL' TYPE 'I' DISPLAY LIKE 'E'.
LEAVE PROGRAM.
ENDTRY.
TRY.
cl_salv_table=>factory(
IMPORTING r_salv_table = alv
CHANGING t_table = <table> ).
alv->display( ).
CATCH cx_salv_msg.
MESSAGE 'Error in ALV display' TYPE 'I' DISPLAY LIKE 'E'.
ENDTRY. -
Problem creating dynamic URI for importing xsl sub templates in rtf
Hi,
We are using xsl based sub templates in RTF. My code in RTF to import sub template is
<?import:http://localhost:7001/xmlpserver/Header.xsl?>
<?call@inlines: CustomerReportHeader?><?end call?>
This sub template import statement is used in lot of RTF's. We require to configure host,port name in server run time properties and will get the value in RTF and will construct URI dynamically ,So we put one property in xdo.cfg.
xdo.cfg contains as below
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
<properties>
<property name="xdk-secure-io-mode">false</property>
</properties>
<properties>
<property name="xslt.HTTP">'localhost:7001/xmlpserver'</property>
</properties>
</config>
and i changed my sub template call to
<?import:http://${HTTP}/Header.xsl?>
<?call@inlines: subtemplate1?><?end call?>
Where subtemplate1 : is one sub template in side Header.xsl
This configuration is not working. The HTTP value is not being parsed. The BI publisher throwing exception as "Unknown host exception ${HTTP}"
Please note that : I am able to print HTTP run time variable value in report by <?$HTTP?> adding in Form Field text.
I have installed BI publisher 10.1.3.4.1 (xmlpserver) in weblogic 10.3.5
Please guide us on this above problem.Hi,
The problem got resolved when we tried same thing in BI publisher 10.1.3.4.2 (xmlpserver) in weblogic 10.3.5. It seems that BI publisher 10.1.3.4.1 does not have dynamic URI support.
Thanks,
Sanjaya
Edited by: Sanjaya on Sep 4, 2012 2:09 AM -
Creating dynamic endpoint for synchronous partner link. SOA 11g
I am on page 522 of the Developer's Guide and have hit a dead end.
1) There is no such thing as a "Transformation" activity.
2) If I assume they meant "Transform" I am still stuck because you can't use a wsdl as input
3) What is a "copy rule?" I thought that meant Assign, but the Assign dialog looks NOTHING like their screen shot.
I get the CONCEPT 100% but the actual implementation is a complete mystery because this book is fatally flawed.It's not a link, it is a literal book.
Oracle SOA Suite 11g R1 Developer's Guide
Of more importance to me than sorting out the book is sorting out the issue. I have two partner links I want to be able to set runtime endpoints for. I also want this to be done based on which deployment server the composites are on, but I can cross that bridge later.
One of the partner links is an HTTP Adapter and the other a WS Adapter.
I imported the WS-address schema and created en endpoint reference variable but then I get stuck. How to I use this to change the endpoint of the partner link? The developer's guide says "use a Transformation" which I am guessing means and Oracle Transform (thing that makes xlst style sheets) but Transform only accepts variables as input and output and the guide screenshot is showing wsdls being used.
Also -- looking at "The BPEL Cookbook" (http://www.oracle.com/technetwork/articles/carey-090553.html) I get imediately lost because only partial examples are shown and repeated references are made to this "DynamicPartnerLink Sample" which I can find umpteen million references to but no source for.
OK.. found the source for the referenced wsdl .. and it has nothing I didn't already have.
I am using jDeveloper... I think the cookbook is referring to some other editor. I needs instructions I can follow in jDeveloper because my employer is requiring we use that.
Edited by: Keith Fosberg on Oct 30, 2012 7:16 AM -
How to create Dynamic Parameters for between dates
Hi,
I have a requirement to create a crystal report with between dates using dynamic parameters.
I am getting data from 'BEx Query' where already filters were defined on Date field. So While I am creating a crystal report these filters are displaying under 'Parameter Fields' automatically as Static. When I execute the report I am getting these Date's as Dropdown box. But as per the 'help' in crystal reports, static values won't get updated if any changes were taken place in backend system.
I have created a Dynamic parameter 'StartDate', but the values are not getting populated in Dropdown box.
Please let me know how to achieve this requirement.
Thanks in advance.
cheers
devPlease re-post if this is still an issue or purchase a case and have a dedicated support engineer work with your directly
Maybe you are looking for
-
Migrating menues from oracle 11i to R12
Hi all, I have to migrate Menus from Oracle 11i to R12, this can be done using FND_LOAD, but we have to migrate it using API's. Please suggest me the API name and approach. Currently I am investigating on fnd_menus_pkg.load_row and fnd_menu_entries_p
-
Disk Boot Failure, Insert System Disk and Press Enter
I have been experiencing an intermittent disk boot failure for the last few months on my HP Pavilion Slimline PC. At first, it would occur once every week or two, typically when the computer would boot up after being in hibernation. After turning off
-
Adding pricing condition type while complaint creation
Hi, I want to add condition type , whille calim creation. I have written the Zpgm using crm_ordwer_maintian , we can do that. But the problem is I need to put in some BADI, i tried order_Save and pricing_I badi. But it gives dump 'maintian' bapi in
-
I have a 09 imac with the larger dvi port I would like to hook up new Apple LED Cinema Display but dvi is smaller is there an adapter
-
Kernal crashes after upgrading to Mountain Lion
Since upgrading from Snow Leopard to Mtn. Lion, 2 strange things have happened. First, and most importantly, about once a day, my computer crashes unexpectedly. I have attached a jpg of the error report without my UUID. Any ideas about how to troub