Create File Table for Existing UNC Paths ?

Hi,
I have a files with in the server ( //Server1/Folder1) and (//server1/Folder2).
Now If I am create FileTable Database in the server ( server2 ) and how can I give filename path ?
Example :
I am going to create FileTableDB database in the server2 , it contains directory 'D:\'
CREATE DATABASE FileTableDB
ON PRIMARY
(Name = FileTableDB,
FILENAME = 'D:\Microsoft SQL Server\MSSQL\DATA\FileTable\FTDB.mdf'),
FILEGROUP FTFG CONTAINS FILESTREAM
(NAME = FileTableFS,FILENAME='\\Server1\Main\cfs')
LOG ON
(Name = FileTableDBLog,FILENAME = 'D:\Microsoft SQL Server\MSSQL\DATA\FileTable\FTDBLog.ldf')
WITH FILESTREAM (NON_TRANSACTED_ACCESS = FULL,DIRECTORY_NAME = N'FileTableDB');
GO
If I run above query then I am getting an error is " cannot be used for FILESTREAM files."
Please help me to solve this..

Hi Narsa,
The FILESTREAM data container for a database must be placed on an NTFS volume on locally-connected storage. Just like database data and log files, the directory cannot be on a UNC share. Even if you use UNC it will not work. FILESTREAM can be setup only
for locally attached storage (locally for the server).
There are more information about enabling and using FILESTREAM, you can review the following article.
http://lennilobel.wordpress.com/2010/12/12/sql-server-2008-filestream-part-2-of-3-enabling-and-using-filestream-2/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Similar Messages

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

Create new mailbox for existing users?

Hi All,
I am new to JNDI concepts. I need to create new mailbox for existing users in domino directory. is it possible?
Scenario is : I have some users in domino directory. They dont have mail account now. I want to create it.
Kindly guide me...
Thanks,
Ram

Hi,
You can try LSMW (Direct method) for uploading class values.
Upload file can hae following structure:
OBJEK     |     ATINN     |     KLART     |     ATWRT
Release Grou+Release strategy |     Characteristic name     |     Class type     |     Class Value
e.g. rel grp is PO, rel strategy is 01, characteristic name is EBAN_EKORG, and class value is 1000 then
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
multiple characterstics can be
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
PO01     |     EBAN_EKGRP |     032     |     100
Regards,
Yogesh

How to create internal table for a structure in BSP

hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
                 include type zuvendstr.
                 data:end of itab_1.
                 data wa_str like line of itab_1.
                 loop at itab_1 into wa_str. %>
                <tr>
                 <td><%=wa_str-name%> </td>
                       <%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPS

Hi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy

Can I create File Formats for Bank Transfers?

Hello Everyone!
I need to know if Sap B1 2007A allow me to create File Formats for bank transfers in outgoing payments. I¨m in Colombia, South America, and working as Chile does.
It is available documentation related to this issue?
Thanks very much
Claudia
Edited by: Darius Heydarian on May 6, 2008 5:28 PM
Edited by: Philip Eller on May 20, 2008 9:10 AM

Kerstin,
Thanks for the information.
I might be wrong, but I understood that SAP did allow you to create dll files for this purpose. In the Document Resource Center in the Add-ons section, click on Payment Engine. There is a document called
'Payment Engine Plug-in Development Guide in Release 6.5'.
Claudia - you might want to see if this document is any use for you.
Although the name shows release 6.5, this document still appears for both 2005 and 2007.
I also checked 2007A and it still has the prompt for File Format.
As I said, I might be wrong, because I do not know anyone who has tried to create a plug-in, but if this is not for creating your own dll files, do you know what it is for?
Let me know what you think.
Regards,
Douglas

I have created two tables for my new report under one transport request.

Unwanted table transported
I have created two tables for my new report under one transport request.
But I only need one table and the second table I was supposed to delete.
However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
how to handle this issue.
I am not sure any additional changes for this program.
Could you please suggest me an idea.
Thanks in adv

>
sam kumar wrote:
> Unwanted table transported
> I have created two tables for my new report under one transport request.
> But I only need one table and the second table I was supposed to delete.
> However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
>
> how to handle this issue.
>
> I am not sure any additional changes for this program.
> Could you please suggest me an idea.
>
> Thanks in adv
Does one custom table more or less really matter? If you really want delete it, delete the table in DEV which will put it into a new transport and get that transport moved to TEST.

How do I calculate the size of files that I have UNC paths for

I am on SQL Server 2008 R2. I have a table that contains a field called [Location]. In that field is a UNC path to the physical file on the repository. Is there a way in SQL Server that I can say give me the select sum([Location] UNC file) where criteria?
I saw some posts about xp_filesize or xp_GetFileDetails, but I do not see them in master. I am unable to add anything and wondering if there is any native functionality that would allow me to accomplish this!? Thanks.

Maybe you can use an Excel Macro for this kind of thing.
Dim iRow
Sub ListFiles()
iRow = 11
Call ListMyFiles(Range("C7"), Range("C8"))
End Sub
Sub ListMyFiles(mySourcePath, IncludeSubfolders)
Set MyObject = New Scripting.FileSystemObject
Set mySource = MyObject.GetFolder(mySourcePath)
On Error Resume Next
For Each myFile In mySource.Files
iCol = 2
Cells(iRow, iCol).Value = myFile.Path
iCol = iCol + 1
Cells(iRow, iCol).Value = myFile.Name
iCol = iCol + 1
Cells(iRow, iCol).Value = myFile.Size
iCol = iCol + 1
Cells(iRow, iCol).Value = myFile.DateLastModified
iRow = iRow + 1
Next
If IncludeSubfolders Then
For Each mySubFolder In mySource.SubFolders
Call ListMyFiles(mySubFolder.Path, True)
Next
End If
End Sub
Try this too.
Sub TestListFilesInFolder()
' Open folder selection
' Open folder selection
With Application.FileDialog(msoFileDialogFolderPicker)
.Title = "Select a Folder"
.AllowMultiSelect = False
If .Show <> -1 Then GoTo NextCode
pPath = .SelectedItems(1)
If Right(pPath, 1) <> "\" Then
pPath = pPath & "\"
End If
End With
NextCode: 'MsgBox "No files Selected!!"
'Application.WindowState = xlMinimized
'Application.ScreenUpdating = False
Workbooks.Add ' create a new workbook for the file list
' add headers
ActiveSheet.Name = "ListOfFiles"
With Range("A2")
.Formula = "Folder contents:"
.Font.Bold = True
.Font.Size = 12
End With
Range("A3").Formula = "File Name:"
Range("B3").Formula = "File Size:"
Range("C3").Formula = "File Type:"
Range("D3").Formula = "Date Created:"
Range("E3").Formula = "Date Last Accessed:"
Range("F3").Formula = "Date Last Modified:"
Range("A3:F3").Font.Bold = True
Worksheets("ListOfFiles").Range("A1").Value = pPath
Range("A1").Select
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.Color = 65535
.TintAndShade = 0
.PatternTintAndShade = 0
End With
With Selection.Font
.Color = -16776961
.TintAndShade = 0
End With
Selection.Font.Bold = True
ListFilesInFolder Worksheets("ListOfFiles").Range("A1").Value, True
' list all files included subfolders
Range("A3").Select
Lastrow = Range("A1048576").End(xlUp).Row
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
ActiveWorkbook.Worksheets("ListOfFiles").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("ListOfFiles").Sort.SortFields.Add Key:=Range( _
"B4:B" & Lastrow), SortOn:=xlSortOnValues, Order:=xlDescending, DataOption:= _
xlSortNormal
With ActiveWorkbook.Worksheets("ListOfFiles").Sort
.SetRange Range("A3:F" & Lastrow)
.Header = xlYes
.MatchCase = False
.Orientation = xlTopToBottom
.SortMethod = xlPinYin
.Apply
End With
Range("A1").Select
Cells.Select
Cells.EntireColumn.AutoFit
Columns("A:A").Select
Selection.ColumnWidth = 100
Range("A1").Select
End Sub
Sub ListFilesInFolder(SourceFolderName As String, IncludeSubfolders As Boolean)
' lists information about the files in SourceFolder
Dim FSO As Scripting.FileSystemObject
Dim SourceFolder As Scripting.Folder, SubFolder As Scripting.Folder
Dim FileItem As Scripting.File
Dim r As Long
Set FSO = New Scripting.FileSystemObject
Set SourceFolder = FSO.GetFolder(SourceFolderName)
r = Range("A1048576").End(xlUp).Row + 1
For Each FileItem In SourceFolder.Files
' display file properties
Cells(r, 1).Formula = FileItem.Path & FileItem.Name
Cells(r, 2).Formula = (FileItem.Size / 1048576)
Cells(r, 2).Value = Format(Cells(r, 2).Value, "##.##") & " MB"
Cells(r, 3).Formula = FileItem.Type
Cells(r, 4).Formula = FileItem.DateCreated
Cells(r, 5).Formula = FileItem.DateLastAccessed
Cells(r, 6).Formula = FileItem.DateLastModified
' use file methods (not proper in this example)
r = r + 1 ' next row number
Next FileItem
If IncludeSubfolders Then
For Each SubFolder In SourceFolder.SubFolders
ListFilesInFolder SubFolder.Path, True
Next SubFolder
End If
Columns("A:F").AutoFit
Set FileItem = Nothing
Set SourceFolder = Nothing
Set FSO = Nothing
ActiveWorkbook.Saved = True
End Sub
Sub CreateList()
Application.ScreenUpdating = False
Workbooks.Add ' create a new workbook for the folder list
' add headers
ActiveSheet.Name = "ListOfFiles"
With Cells(3, 1)
.Value = "Folder contents:"
.Font.Bold = True
.Font.Size = 12
End With
Cells(4, 1).Value = "Folder Path:"
Cells(4, 2).Value = "Folder Name:"
Cells(4, 3).Value = "Folder Size:"
Cells(4, 4).Value = "# Subfolders:"
Cells(4, 5).Value = "# Files:"
Range("A3:E3").Font.Bold = True
ListFolders BrowseFolder, True
Application.ScreenUpdating = True
Cells.Select
Cells.EntireColumn.AutoFit
Columns("A:A").Select
Selection.ColumnWidth = 100
Columns("B:B").Select
Selection.ColumnWidth = 25
Range("A1").Select
End Sub
Sub ListFolders(SourceFolderName As String, IncludeSubfolders As Boolean)
' lists information about the folders in SourceFolder
Dim FSO As Scripting.FileSystemObject
Dim SourceFolder As Scripting.Folder, SubFolder As Scripting.Folder
Dim r As Long
Set FSO = New Scripting.FileSystemObject
Set SourceFolder = FSO.GetFolder(SourceFolderName)
' display folder properties
Worksheets("ListOfFiles").Range("A1").Value = SourceFolderName
Range("A1").Select
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.Color = 65535
.TintAndShade = 0
.PatternTintAndShade = 0
End With
With Selection.Font
.Color = -16776961
.TintAndShade = 0
End With
Selection.Font.Bold = True
r = Cells(Rows.Count, 1).End(xlUp).Row + 1
Cells(r, 1).Value = SourceFolder.Path
Cells(r, 2).Value = SourceFolder.Name
Cells(r, 3).Value = SourceFolder.Size
Cells(r, 3).Value = (SourceFolder.Size / 1048576)
Cells(r, 3).Value = Format(Cells(r, 3).Value, "##.##") & " MB"
Cells(r, 4).Value = SourceFolder.SubFolders.Count
Cells(r, 5).Value = SourceFolder.Files.Count
If IncludeSubfolders Then
For Each SubFolder In SourceFolder.SubFolders
ListFolders SubFolder.Path, True
Next SubFolder
Set SubFolder = Nothing
End If
Columns("A:E").AutoFit
Set SourceFolder = Nothing
Set FSO = Nothing
ActiveWorkbook.Saved = True
End Sub
And, finally.
Const BIF_RETURNONLYFSDIRS As Long = &H1 ''' For finding a folder to start document searching
Const BIF_DONTGOBELOWDOMAIN As Long = &H2 ''' Does not include network folders below the domain level in the tree view control
Const BIF_RETURNFSANCESTORS As Long = &H8 ''' Returns only file system ancestors.
Const BIF_BROWSEFORCOMPUTER As Long = &H1000 ''' Returns only computers.
Const BIF_BROWSEFORPRINTER As Long = &H2000 ''' Returns only printers.
Const BIF_BROWSEINCLUDEFILES As Long = &H4000 ''' Returns everything.
Const MAX_PATH As Long = 260
Type BROWSEINFO
hOwner As Long
pidlRoot As Long
pszDisplayName As String
lpszINSTRUCTIONS As String
ulFlags As Long
lpfn As Long
lParam As Long
iImage As Long
End Type
Declare Function SHGetPathFromIDListA Lib "shell32.dll" (ByVal pidl As Long, ByVal pszBuffer As String) As Long
Declare Function SHBrowseForFolderA Lib "shell32.dll" (lpBrowseInfo As BROWSEINFO) As Long
Function BrowseFolder() As String
Const szINSTRUCTIONS As String = "Choose the folder to use for this operation." & vbNullChar
Dim uBrowseInfo As BROWSEINFO
Dim szBuffer As String
Dim lID As Long
Dim lRet As Long
With uBrowseInfo
.hOwner = 0
.pidlRoot = 0
.pszDisplayName = String$(MAX_PATH, vbNullChar)
.lpszINSTRUCTIONS = szINSTRUCTIONS
.ulFlags = BIF_RETURNONLYFSDIRS
.lpfn = 0
End With
szBuffer = String$(MAX_PATH, vbNullChar)
''' Show the browse dialog.
lID = SHBrowseForFolderA(uBrowseInfo)
If lID Then
''' Retrieve the path string.
lRet = SHGetPathFromIDListA(lID, szBuffer)
If lRet Then BrowseFolder = Left$(szBuffer, InStr(szBuffer, vbNullChar) - 1)
End If
BrowseFolder = BrowseFolder & "\"
End Function
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

How can create color table for "write bmp file.vi"?

i want to create a color table for a 8 bit bitmap.The color table is the input of "write bmp file.vi". how can i make it?
thanks!

> i want to create a color table for a 8 bit bitmap.The color table is
> the input of "write bmp file.vi". how can i make it?
> thanks!
>
There is a color control on the front panel numerics palette. A color
in LV is a four byte xRGB formatted number. So you can make an array of
the color numerics and set them by hand or format the numbers however
you like. If unwired it will use the LV color palette which is pretty
much the HTML palette.
Greg McKaskle

How to create a partiotion for existing table

Hi,
There ia one table in database with data. I want to create a partion for this table. data loss of data is not an issue.
Please provide the query for this.
Regards,
Venki

An existing non-partitioned table cannot be partitioned. You will have to create a new, partitioned table and move the data (if you care to keep it) from the old table to the new table, potentially followed by dropping the old table and renaming the new table to use the old table name.
If you do not have a downtime window to accomplish this, you can use DBMS_REDEFINITION to assist. That, however, is just adding a bit of extra complexity on top of the basic procedure in order to support users accessing the table while you're building the new table. Unless your downtime window is insufficient to accomplish the move manually, I wouldn't bother with DBMS_REDEFINITION.
Justin

Unable to create File System Repository using Network Path

Hi All,
I am trying to create a File System Repository.
I created a networkpath and windows system and used the same while creating File Repository according to the steps in help.
With out using Networkpath(i.e.,If I use IP address,I am able to create File System Repository).
But with the network path,it throws the following error as seen in Component Monitor.
<b>Startup Error: The localroot does not exist: C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001
</b>
Did any one face this problem?
Any help please........
Rgds,
Santhosh

Hi,
I am getting the same error even if I replace(\) by slashes(/).
I tried on EP6SP12 as well as EP6SP2 and got the same error on both.
The repository is searching for a folder named with
n/w path on the portal server itself(i.e, it is searching in the following folder
<b>C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001</b>),instead of searching on the remote system.
Can any one help me in solving the problem
Thanks in Advance.
Rgds,
Santhosh

Audit logs on Windows 2008 works different when file is modified from UNC path

Hello All,
Here i have a strange situation with the generation of audit logs when folders\files are changed locally(my computer) on the server (vs) from the UNC path
(\\servername\drive$\folder\....).
File Server : Windows 2008 R2.
Audting enabled and SACL set on the folder level.
Enabled advanced auditing for Audit Object Access and enabled the force sub category audit settings on vista \ window 2008 policy via GPO and also verified that the sub category is set.
also set SACL on one folder on the R drive. (\\servername\r$\<folder>\<audited folder>
auditpol /get /category:"Object Access"
Object Access : File System
Success and Failure
Situation : 1
When i make any manipulations (traversing \ listing \ adding or deleting folder or files) on the server locally from my computer ---> . r drive --> folder --> audited folder , i get the event id generated (4663) with all the correct
information.
For ex: created a new txt file.
Object: Object Server: Security, Object Type: File, Object Name: R:\Audits1\folder1\New Text Document.txt, Handle ID: 0xcb4
Process Information: Process ID: 0x1bac , Process Name: C:\Windows\explorer.exe
Access Request Information: Accesses: WriteData (or AddFile) AppendData (or AddSubdirectory or CreatePipeInstance) , Access Mask: 0x6
Situation : 2
When i make the same manipulations (traversing \ listing \ adding or deleting folder or files) on the server or remotely via the UNC path \\servername\r$\folder\audited folder or DFS share or \\servername\<sharename>
, i dont get the event id generated (4663) with the needed information.
For ex: created a new txt file.
Object: Object Server:
Security , Object Type:File ,
Object Name:
R:\Audits1\folder1\New Rich Text Document (3).rtf , Handle ID:
0xa3c
Process Information: Process ID: 0x4, Process Name:
Access Request Information:
Accesses: WriteData(or addfile), Access Mask: 0x100
In the second situation process name is empty (for the file events) and also found that the logs generated are very less compared to the first situation.
Please suggest if there is any fix with this.
Thanks,

Enable the following auditing on the server either through domain
policy or local policy:
Audit logon events - Success
Audit Object Access - Success
On the Auditing tab, add Everyone with the following audit settings.

Unable to see the file share content via UNC path

I have run a cmd command to modify the NTFS permissions on a few home directories.
That command has helped me to remove all from the ACL of shared folders; and add domain admins into it.
I am an admin on that Windows server. Now, whenever I try to access any home directory via UNC path; it doesn't displays the files and folders in it. But, if I go to the server and try to open the particular home directory from there...first it gives me
a prompt that I currently do not have access on folder and then gives me an option to click on continue and then I can access the files and folders within the directory.
I am also able to see the files and folders in the directory via UNC path after doing the above steps.
Can somebody help me understand what I did wrong here and how can this be resolved now?

Sorry, am added into local administratir group. But, NTFS permissions shows that I have only "read" and "change" permissions (I have checked this from effective permissions).
The ACL of folder shows only "Domain Admins" have full access and I am not a part of AD group "Domain Admins". I think this is the root cause of the issue.
I am running below mentioned command to give myself full access on the file shares without making any changes to the current ACL of all shared folders. However, it is not working and not even throwing any error message.
for /f %i in (u:\users.txt) do cacls \\hdfile01\users$\%i /C /G "AMadm":F
users.txt contains 'cn'. Another thing to notice here is that if I just keep one ID in .txt file and then run my command; it is working. But its not running for all users in loop.
Can somebody please help.

How do i change the HTML file names for existing index

Hi,
How do i change my existing HTML file names for indexes. The Html file name is disabled when we click on properties.
Ex: Index Keywork : Architecture
Old HTML Page/URL =: Architecture.htm
I want to change Old HTML Page/URL =: Architecture.htm to architecture_new.htm
Please find the screenshot attached.

That's because you are looking at the Properties and that is not how you create index entries.
Highlight the Index keyword ("Paste" in this example). It shows below what is already linked. If you delete that, the keyword will be displayed in bold to show no keyword is attached. You can add further keywords by dragging them from the Topic List.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Oracle SQL Developer - File, Open , File Name Not Accept UNC Path Form

In Oracle SQL Developer, at least the File, Open (Dialog's), the File Name (if not all File / Directory Name) Text Box(es) is (are) not accepting, at least for me, the UNC Path Form of Folders on Network Servers. The same UNC Path (or UNC Paths in general) works in the File / Directory Name Text Box of every other Windows App I've tried (from Windows 95 to Windows 7). Is there a way to do this? If not, was it intentional and where can I suggest this as a fix / enhancement?
I'm using Windows XP w/ SP3.

DUH! I figured out what happened. In my first search, I searched (using "Actions", "Filter", "Column" option) for "Title Contains 'UNC'" which didn't find anything because the single-quotes were considered literals (which isn't consistent with the "Row" option or with the technical SQL syntax one would expect given technical operators like "!=", pffft, "!="??? Really???). Then, all subsequent searches returned nothing, because all previous searches are combined with implied "And" Operators until you select "Actions", "Reset" (which isn't consistent with any Web / Desktop App search feature I've ever seen). Don't get me wrong. The latter is a great feature. It just needs to be documented better.
It probably wouldn't hurt to: a) include easily visible tips on whether single / double quotes are needed and b) show an "And" Operator in front of each previous search listed so people won't mistake it for simply a Search Criteria History vs. Current Search Criteria, oh and add a heading that labels it as, oh, IDK, "Current Search Criteria", maybe? IDK, call me crazy (or just another stupid user posing as a developer with 16 years experience ;).

How to create PLD_Items table for Crystal Reports

Hi experts,
Im trying to use the variable 130 for a report but in crystal reports, in some SAP Standard Reports the table PLD_Items appears, my question is how to create this structure for my report, i know that is an ADO.NET connection based on an XML file, but i dont know from where i can take this value can any one help me please?
Best Regards
Dave

If this is CR for B1, please post to SAP Business One Application
Alternatively see the SCN Site Index for the correct SCN Space for your product / component.
- Ludek
SCN Moderator

Create File Table for Existing UNC Paths ?

Similar Messages

Maybe you are looking for