Emplyee Profile Data missing in MSS

In MSS under Employee Review -> Employee Profile information from R/3 for Personal Data is not being pulled through into MSS.  Items missing are DOB and Address.  Is there a Function Group etc that needs to be changed?

Hi Stuart,
It is probably a data issue.. You can verify it in the backend by testing the function module
HRWPC_RFC_EP_READ_PERSONALDATA. If you get the expected result, then the issue is Portal related else it is a backend issue. Actually, the personal data iView makes an RFC call of this very function to obtain the employee data.
Regards,
Suresh Datti
Message was edited by: Suresh Datti

Similar Messages

  • User Profiles option missing from SharePoint Designer 2013 workflows

    I noticed the User Profiles is missing as a Data Source option in the SharePoint Designer 2013 workflow platform (see image); whereas, it exists in the SharePoint 2010 workflow platform. Is there a way to connect this feature in SharePoint 2013 workflows
    by registering it or configuring through Workflow Manager? If not, what is the new approach in SP 2013 to call User Profiles services?

    Hi,
    Based on your description, you want to use user profile in SharePoint 2013 workflow.
    In SharePoint 2013 workflow user profiles is missing, if you have to use the user profile, you can create a SharePoint 2010 workflow, and use Start a List workflow action in 2013 workflow to start the 2010 workflow.
    The article below is about How to start a SharePoint 2010 Workflow within a SharePoint 2013 Workflow Using SharePoint Designer 2013
    http://www.c-sharpcorner.com/UploadFile/anavijai/how-to-start-a-sharepoint-2010-workflow-within-a-sharepoint/
    And in SharePoint 2013 there is an approach to user profile, you can add the action call http web service to get the information of user profile.  
    The article below is about how to use call http web service in SharePoint 2013 workflow.
    https://msdn.microsoft.com/en-us/library/office/dn567558.aspx
     Best regards
    Sara Fan
    TechNet Community Support

  • "Profile is missing or corrupted." Will not start again even with fresh install.

    Apparently after some kind of crash, whenever I start Firefox I receive an error message saying "Profile is missing or corrupted. Cannot be loaded" or something like that. The information about loading the Profile Manager does no good, since it presumes you can already start Firefox. It is not even allowing me to create a new profile, and downloading a new version of Firefox does not work either.

    Hello tomreedtoon,
    try to delete the [http://kb.mozillazine.org/Profiles.ini_file profiles.ini] file to force firefox to create a new profile, the profiles.ini file exist in firefox profile folder '''path'''
    for your windows use "Start > Run" (or press "Windows key+R" to open the Run box) and type :
    %APPDATA%\Mozilla\Firefox
    and click "OK" to quickly open the appropriate folder
    when the new profile created (after you delete the profiles.ini folder) then see:
    [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile#os=win7&browser=fx22 Recovering important data from an old profile]
    [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox Transferring data to a new profile - Firefox]
    thank you

  • Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    AIR give you classes to detect an on-line or off-line status, it's in 
    this way for the sake of flexibility for instance what happens if you 
    only what to sync  data only on Saturdays at 2 am? If it were done 
    automatically that'll be a problem. And it isn't so complicated.
    You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
      it's an application that does everything you have in mind.
    I don't understand your question abou file types.
    An AIR app can communicate with almost every backend served tech 
    CF, .Net, PHP, RoR.
    Sincerely,
    Michael
    El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
    >
    I have to say that I'm loving the picture! well cool!
    >
    Sorry but I don't quiet understand. I thought AIR did the updating 
    automatically? I didn't realise the developer had to program the 
    logic of how the updates take place?  Is it a case in most AIR apps 
    that when online the app updates the server and once every intervel 
    (of however long) the local SQLite DB is synced to the more updated 
    server DB. Then when offline the developer has to sense that the app 
    is offline and store a log manually of the updates without any help 
    from AIR itself, and then update once it comes online again?
    >
    Can AIR link to anything more than a database on the server side 
    apart from webservices, for example .as files or any other file types?
    >
    What type of server is a Flex app stored on, is it a specific Adobe 
    server rather than a Java or .NET server?
    >
    Thank you so much for your last comment!
    IrishAIRMax
    >

  • P13/Profile data sharing between two WLP instance

    We are using WLP 10.3 with oracle as our portal database, we have lot of users in QA and their user profile data stored in one of our WLP-1 instance, now there is need of another WLP instance that we would like to use.
    Here is what we did
    1. We cloned the database information related to WLP-1 to another database intended for WLP-2
    1. We created another WLP domain(WLP-2), and modified the all the data source to point to the 2nd database schema assuming that all the profile data and users will be availble to WLP-2.
    Now we are deploying our application to WLP-2 domain, here is what we are getting while deploying, during deployment we do set entitlement information from a XML file(Imported/downloaded from our primary development machine where we do all the build/entitlements setting), not sure if there any other way to clone a WLP domain/ user profile.
    Any help on this is much appreciated.
    ####<Nov 5, 2009 2:44:54 PM PST> <Info> <PortletServer> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1257461094796> <BEA-420653> <[Portal] Deploying the portlet application in webapp [WEB-INF/portlet.xml].>
    ####<Nov 5, 2009 2:44:55 PM PST> <Info> <ServletContext-/Portal> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1257461095046> <BEA-000000> <Initializing Spring root WebApplicationContext>
    ####<Nov 5, 2009 2:45:06 PM PST> <Info> <ServletContext-/prnService> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1257461106633> <BEA-000000> <Initializing Spring root WebApplicationContext>
    ####<Nov 5, 2009 2:45:07 PM PST> <Error> <Entitlements> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257461107820> <BEA-402731> <Attempt to persist entitlements reference document failed. Attempted to ["createResourceRef"] at location ["ResourceRef: resourceRefID 4001 appID 2001 resourceName content Virtual Content Repository PRN Portal Document Repository description capability can_vis_view metaData null providerName XACMLRoleMapperPolicyRef: resourceRefID 4001 roleAppID 2001 resourceAppID 2001 resourceCapability can_vis_view roleID2001 providerName XACMLAuthorizer"] for document [""] failed.
    java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (WLP_USER2.PK_ENT_POLICY) violated
    at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
    at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
    at weblogic.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
    at weblogic.jdbc.base.BaseStatement.commonExecute(Unknown Source)
    at weblogic.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
    at weblogic.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
    at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
    at com.bea.p13n.entitlements.management.internal.RDBMSEntitlementRefDelegate.createPolicyRef(RDBMSEntitlementRefDelegate.java:888)
    at com.bea.p13n.entitlements.management.persistence.internal.RDBMSEntitlementRef.createResourceRef(RDBMSEntitlementRef.java:213)
    at com.bea.p13n.entitlements.management.internal.RDBMSPolicyRefManager.setPolicyRefItem(RDBMSPolicyRefManager.java:126)
    at com.bea.p13n.entitlements.management.internal.RDBMSSecurityPolicyManager.processCreatePolicyRoles(RDBMSSecurityPolicyManager.java:1045)
    at com.bea.p13n.entitlements.management.internal.RDBMSSecurityPolicyManager.createSecurityPolicy(RDBMSSecurityPolicyManager.java:143)
    at com.bea.p13n.entitlements.management.SecurityPolicyManager.createSecurityPolicy(SecurityPolicyManager.java:87)
    at com.bea.content.federated.ContentSecurityHelper.createVisitorSecurityPolicy(ContentSecurityHelper.java:459)
    at com.bea.content.manager.internal.ContentUpgradeListener.createDefaultViewPolicy(ContentUpgradeListener.java:204)
    at com.bea.content.manager.internal.ContentUpgradeListener.postStartInternal(ContentUpgradeListener.java:95)
    at com.bea.content.manager.internal.ContentUpgradeListener.access$000(ContentUpgradeListener.java:51)
    at com.bea.content.manager.internal.ContentUpgradeListener$1.run(ContentUpgradeListener.java:69)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at com.bea.content.manager.internal.ContentUpgradeListener.postStart(ContentUpgradeListener.java:65)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PostStartAction.run(BaseLifecycleFlow.java:292)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
    at weblogic.application.internal.flow.BaseLifecycleFlow.postStart(BaseLifecycleFlow.java:66)
    at weblogic.application.internal.flow.TailLifecycleFlow.activate(TailLifecycleFlow.java:33)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:16)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:140)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:106)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:820)
    at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1227)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:436)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<Nov 5, 2009 2:45:07 PM PST> <Error> <Entitlements> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257461107845> <BEA-402731> <Attempt to persist entitlements reference document failed. Attempted to ["createResourceRef"] at location ["ResourceRef: resourceRefID 2002 appID 2002 resourceName content MARKER_POLICY description capability MARKER_CAPABILITY metaData null providerName XACMLRoleMapperPolicyRef: resourceRefID 2002 roleAppID 2002 resourceAppID 2002 resourceCapability MARKER_CAPABILITY roleID2002 providerName XACMLAuthorizer"] for document [""] failed.
    java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (WLP_USER2.PK_ENT_POLICY) violated
    at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
    at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
    at weblogic.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
    at weblogic.jdbc.base.BaseStatement.commonExecute(Unknown Source)
    at weblogic.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
    at weblogic.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
    at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
    at com.bea.p13n.entitlements.management.internal.RDBMSEntitlementRefDelegate.createPolicyRef(RDBMSEntitlementRefDelegate.java:888)
    at com.bea.p13n.entitlements.management.persistence.internal.RDBMSEntitlementRef.createResourceRef(RDBMSEntitlementRef.java:213)
    at com.bea.p13n.entitlements.management.internal.RDBMSPolicyRefManager.setPolicyRefItem(RDBMSPolicyRefManager.java:126)
    at com.bea.p13n.entitlements.management.internal.RDBMSSecurityPolicyManager.processCreatePolicyRoles(RDBMSSecurityPolicyManager.java:1045)
    at com.bea.p13n.entitlements.management.internal.RDBMSSecurityPolicyManager.createSecurityPolicy(RDBMSSecurityPolicyManager.java:143)
    at com.bea.p13n.entitlements.management.SecurityPolicyManager.createSecurityPolicy(SecurityPolicyManager.java:87)
    at com.bea.p13n.delegation.management.DelegationPolicyManager.createDelegationPolicy(DelegationPolicyManager.java:198)
    at com.bea.content.federated.ContentSecurityHelper.createDAPolicy(ContentSecurityHelper.java:567)
    at com.bea.content.manager.internal.ContentUpgradeListener.createMarkerPolicy(ContentUpgradeListener.java:152)
    at com.bea.content.manager.internal.ContentUpgradeListener.postStartInternal(ContentUpgradeListener.java:98)
    at com.bea.content.manager.internal.ContentUpgradeListener.access$000(ContentUpgradeListener.java:51)
    at com.bea.content.manager.internal.ContentUpgradeListener$1.run(ContentUpgradeListener.java:69)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at com.bea.content.manager.internal.ContentUpgradeListener.postStart(ContentUpgradeListener.java:65)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PostStartAction.run(BaseLifecycleFlow.java:292)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
    at weblogic.application.internal.flow.BaseLifecycleFlow.postStart(BaseLifecycleFlow.java:66)
    at weblogic.application.internal.flow.TailLifecycleFlow.activate(TailLifecycleFlow.java:33)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:16)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:140)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:106)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:820)
    at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1227)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:436)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<Nov 5, 2009 2:45:07 PM PST> <Info> <Deployer> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257461107851> <BEA-149059> <Module prnService of application PortalEar is transitioning from STATE_ADMIN to STATE_PREPARED on server AdminServer.>
    ####<Nov 5, 2009 2:45:07 PM PST> <Info> <WlwConfigModule> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257461107852> <BEA-000000> <deactivate descriptor: WEB-INF/beehive-url-template-config.xml com.bea.wlw.runtime.descriptor.urltemplate.config.UrlTemplateConfigBeanImpl>
    ####<Nov 5, 2009 2:45:07 PM PST> <Info> <ServletContext-/prnService> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1257461107884> <BEA-000000> <Closing Spring root WebApplicationContext>
    ####<Nov 5, 2009 2:45:07 PM PST> <Info> <Deployer> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257461107924> <BEA-149060> <Module prnService of application PortalEar successfully transitioned from STATE_ADMIN to STATE_PREPARED on server AdminServer.>
    ####<Nov 5, 2009 2:45:07 PM PST> <Info> <Deployer> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257461107924> <BEA-149059> <Module Portal of application PortalEar is transitioning from STATE_ADMIN to STATE_PREPARED on server AdminServer.>
    ####<Nov 5, 2009 2:45:07 PM PST> <Info> <WlwConfigModule> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257461107925> <BEA-000000> <deactivate descriptor: WEB-INF/beehive-url-template-config.xml com.bea.wlw.runtime.descriptor.urltemplate.config.UrlTemplateConfigBeanImpl>
    ####<Nov 5, 2009 2:45:08 PM PST> <Info> <ServletContext-/Portal> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1257461108016> <BEA-000000> <Closing Spring root WebApplicationContext>
    ####<Nov 5, 2009 2:45:08 PM PST> <Warning> <JMX> <sfrhvmportalqawl02.prn.com> <AdminServer> <listenerContainer-2> <<WLS Kernel>> <> <> <1257461108941> <BEA-149517> <An attempt was made to unregister an mbean that was already unregistered: weblogic.jms.frontend.FESession@275e1ed>
    ####<Nov 5, 2009 2:45:08 PM PST> <Info> <Deployer> <sfrhvmportalqawl02.prn.com> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257461108969> <BEA-149060> <Module Portal of application PortalEar successfully transitioned from STATE_ADMIN to STATE_PREPARED on server AdminServer.>

    No I think it is supported, here is my commit.log which says we can re-use a existing WLP RDBMS with a new WLP domain. I just don't know how to reset, We are not sharing the same db here, we have a copy of original portal schema/db
    INFO (Nov 5, 2009 3:22:21 PM PST): Verbose logging has been disabled on the server.
    INFO (Nov 5, 2009 3:22:21 PM PST): The propagation servlet is starting the [Commit] operation.
    INFO (Nov 5, 2009 3:22:21 PM PST): The modifier [allowMaintenanceModeDisabled] with a value of [true] will be used for this operation.
    INFO (Nov 5, 2009 3:22:21 PM PST): The modifier [cm_checkinComment] with a value of [My sample checkin comment.] will be used for this operation.
    INFO (Nov 5, 2009 3:22:21 PM PST): The modifier [allowSecurityOutOfSync] with a value of [true] will be used for this operation.
    INFO (Nov 5, 2009 3:22:21 PM PST): The modifier [differenceStrategy] with a value of [pessimistic] will be used for this operation.
    INFO (Nov 5, 2009 3:22:21 PM PST): Validating that current user is in the Admin role...SUCCESS
    INFO (Nov 5, 2009 3:22:21 PM PST): Validating that the admin server is running...SUCCESS
    INFO (Nov 5, 2009 3:22:21 PM PST): Validating that Maintenance Mode is enabled...SUCCESS
    ERROR (Nov 5, 2009 3:22:23 PM PST): Validating that LDAP and RDBMS security resources are in sync...FAILURE
    ERROR (Nov 5, 2009 3:22:23 PM PST): The security policy for resource [everyone     PRNUsers     PRN Administrator User Group] with capability [Create Update Delete User/Group] is missing in LDAP. If you have reset LDAP or configured a new WLP domain to use a pre-existing WLP RDBMS, then you must reset your RDBMS. Otherwise, insure all available patches have been applied to your installation. *
    WARNING (Nov 5, 2009 3:22:23 PM PST): Because the modifier [allowSecurityOutOfSync] was enabled this validation failure will be ignored and the operation will proceed. However, this may cause propagation failures when accessing or modifiying security resources. *
    ERROR (Nov 5, 2009 3:22:27 PM PST): Validating that manual elections have been fulfilled on the destination system...FAILURE
    WARNING (Nov 5, 2009 3:22:27 PM PST): The following resources need to be updated on the destination application. Propagation does not handle updating these types of resources. They will need to be updated manually.
    WARNING (Nov 5, 2009 3:22:27 PM PST): Resource [Application:portalservices:Portal.WebApp:Portal.Library:PRNHome.Portlet], Manual Explanation [This portlet definition is based on a .portlet file. If changes have been made to the .portlet file make sure to move the updated .portlet file to the destination application. If changes to the definition have been made using the Portal Administration Tools then propagation will make the necessary updates.].
    WARNING (Nov 5, 2009 3:22:27 PM PST): Resource [Application:portalservices:Portal.WebApp:Portal.Library:campaignmodule.Portlet], Manual Explanation [This portlet definition is based on a .portlet file. If changes have been made to the .portlet file make sure to move the updated .portlet file to the destination application. If changes to the definition have been made using the Portal Administration Tools then propagation will make the necessary updates.].
    INFO (Nov 5, 2009 3:22:27 PM PST): The commit operation will attempt to process [117] elections.
    INFO (Nov 5, 2009 3:22:30 PM PST): The inventory was committed successfully.
    INFO (Nov 5, 2009 3:22:30 PM PST): The propagation servlet has finished the [Commit] operation.

  • What do I do when my Firefox profile is missing or inaccessible?

    HP support helped me resolve an overheating issue with my Notebook laptop by remotely connecting to my laptop. Now I can't start Firefox. It says it is already running but it's not and I keep getting the missing profile error. I am using my cell phone to send this since I have no browser for internet access.
    <sub>edit: removed personal information for your protection. please note that we cannot offer support via telephone, so please continue in the forum. thanks for your understanding! (philipp)</sub>

    Do you have Windows on your laptop? It should have Internet Explorer installed by default. All Windows computers come with it. You should be able to use that for the time being until we can sort this out.
    You can also try uninstalling Firefox thru Control Panel > Uninstall a Program. But make sure to leave the box that wants to erase your profile data unchecked. If you don't see this checkbox, don't worry about it. They might have removed this option. Then you can download a new copy of Firefox using Internet Explorer. Hopefully this will work.
    Download Firefox from:
    https://www.mozilla.org/en-US/firefox/desktop/

  • Date Format in MSS iviews

    Hi,
    We have EP6 SP11 with the Manager Self Service Business Package. The dates on our MSS iviews are currently showing as MM/DD/YYYY. I have set the default country of the portal to GB but the language setting in the user profile is overriding this. If I set the language to "English (United Kingdom)" the date shows correctly as DD/MM/YYYY. But if I just set it to "English", the dates show as MM/DD/YYYY.
    However, we are using an R/3 system as our user store, so the language setting is coming from there (SU01 > Communication section) and there is no option for "English (United Kingdom)", only "English". How can I change the "English" option to default to en_gb rather than en_us? Or can I map the English setting in R/3 to English (United Kingdom) setting in the portal? Or is there something else I can do?
    Any help greatly appreciated!
    Thanks in advance,
    Jane

    Hi Jane,
    Try to change the language settings of the Internet Explorer and see if it is not being over-ridden from the user profile.
    Regards,
    Mohan

  • Lens Profile Data

    Lens Profile Data :
    Biogon_T_2.8_21_ZM ;
    Biogon_T_2.8_25_ZM ;
    Biogon_T_2.8_25_ZM ;
    Biogon_T_2_35_ZM ;
    CBiogon_T_2.8_35_ZM ;
    CSonnar_1.5_50_ZM ;
    CZ_Distagon_T_2_8_15_ZM ;
    LEICA_APO-SUMMICRON-M_50_mm_f2_ASPH ;
    Planar_T_2_50_ZM ;
    Sonnar_T_2_85_ZM ;
    Tele-Tessar_T_4_85_ZM ;
    Tri-Elmar-M_16-18-21_mm_ASPH ;
    Tri-Elmar-M_28-35-50_mm_ASPH .
    By sending this e-mail containing the attached lens profile data to Adobe, you grant Adobe a nonexclusive, worldwide, royalty-free and fully paid license to use, modify, reproduce, publicly perform and display, and distribute such lens profile data in products and services created by or on behalf of Adobe.
    https://docs.google.com/open?id=0B6oTZqWrSBVCdnNLQmYwLXdFbkk

    Hi Simon,
    I don't think we're on the same page here...   I'm asking about the creation of a lens correction profile, not the matching and application of a lens correction profile.   I've been using exiftool to supplement necessary EXIF data (e.g. FocalLength, FNumber, FocalLengthin35mmFormat, SubjectDistance, FocalPlaneXResolution, FocalPlaneYResolution)  to my images before using them to generate a lens profile in ALPC.  Since I've started creating profiles, I've found a couple EXIF data tags that were missing.  When I add them to the images and re-generate the lens profile with that same image set, the distortion and vignette parameters change, which proves that they are used by ALPC.  I'm starting to wonder how many other ALPC input parameters (EXIF tags) I'm missing.  So... Assuming someone has a fully manual system and has to add ALL of the EXIF data that ALPC would need to mathematically calculate accurate distortion and vignette models, what  EXIF data would have to be added?
    Thanks!
    - Jason

  • Sales Order Incompletion log - Serial Number profile is missing for materia

    The sales order is incomplete with missing data = No. serial numbers
    System gives an information saying "Serial number profile is missing for material".
    Message no. V1192
    I maintained a serial no. profile for the material in "Work scheduling" view.  But still the document is incomplete.
    Please let me know how to make this document complete.
    Thanks,
    Shankar

    Hi,
    Goto the Sales document in VA02  ->Edit-> incompletion log.
    It will show the data which should be filled, select that and click on the COMPLETE DATA tab and it will lead to the field in which the data should be entered.
    Please do like that and save it
    then once again check the EIT-->INCOMPLETION LOG
    if the document is complete save it
    rgards,
    santosh

  • Error " Data missing for the entry check while creating a new waste code

    Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
    This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
    I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
    I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
    I have checked everything several times watching for typos or looking for a missing step.
    I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
    I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
    Phrase set to Z_EHS_WA_WASTE_CATALOG.
    enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
    After matching up the master data It should work fine but I might be missing something to get it running ok.
    ¿Any idea?
    Regards,
    Alvaro

    Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
    1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
    2. Create a copy of the 5 characteristics included in this class.
    SAP_EHS_1024_001_WASTE_CATALOG
    SAP_EHS_1024_001_WASTE_CODE
    SAP_EHS_1024_001_WA_SUBCATEG
    SAP_EHS_1024_001_WA_CATEGORY
    SAP_EHS_1024_001_REMARK
    change the name by
    Z_EHS_WA_WASTE_CATALOG
    Z_EHS_WA_WASTE_CODE
    Z_EHS_WA_SUBCATEG
    Z_EHS_WA_CATEGORY
    Z_EHS_WA_REMARK.
    I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
    I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
    3. Create phrase sets for each new category. with same name.
    4. Match up the master data.
    5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
    I think I have followed all the steps, but for some reason it doesn't find the catalog
    The phrase for the catalog is EWC in english and LER in spanish.
    Regards
    Alvaro.

  • Suddenly getting UserNotFoundException: User Not Found: Could not load profile data from the database

    Starting yesterday (I believe) we are suddenly receiving a "User not found" error when trying to view a user's profile page when clicking on their name (in search or elsewhere) via the url
    https://www.contoso.org/Person.aspx?accountname=contoso%255Cmyuserlogin
    This is happening for all users. (but profiles exist and seem ok, and sync with AD is running fine) When looking in the logs I see the error  (full ULS log is later below)
    Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database.
    The only clue of what MAY be going on is just before that I see the following two lines which came up after I changed the Database logging to Verbose:
    ConnectionString: 'Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][UPAPROFILEDB]'    Partition:
    NULL ConnectionState: Closed ConnectionTimeout: 15
    SQL connection time: 0.0456 for Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] 
    If I am reading that correctly, does it mean the connection to the database is timing out instantly? I am able to use powershell to pull up profiles and print them to the screen while on the webservers. And it's only the one specific page that is not
    working.
    What sort of tests or further debugging can I do for the error above?
    We are on premise, SharePoint 2013 sp1, sql2012, server 2012, claims using the full SharePoint Profiile Sychronization against AD.  Farm has been running since last august. Last week the admin team did run windows update on all servers, I can't be sure
    if it was broken for 5 days and no one noticed or if it broke yesterday.
    I already did the following:
    Verified the profiles do exist in central admin.
    I can still access their personal sites directly via
    https://www.contoso.org/personal/myuserlogin
    I checked the ProfileDB database and made sure the service accounts for the UPA has dbowner, so does the farm account, and the web application pool has SPDataAccess.
    Verified the AD sync account has proper rights in AD.
    I reran a full synchronization which ran with no errors.
    File systems on the webservers and appserver have plenty of free space.
    Rebooted every server in farm
    I even checked the bin directory of the mysite webapplication, (since once I had a weird problem where access to bin was removed.) WSS_ADMIN_WPG, WSS_RESTRICTED_WPG_W4 have full control and WSS_WPG,IIS_IUSRS all have read and execute.
    I opened powershell on the webserver I can indeed load profiles and print their values.
    Timestamp Area Category EventID Level Message Correlation
    07/25/2014 14:11:08.43 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
    07/25/2014 14:11:08.43 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-fbe8-a08d-57d2-afa6a4948743
    07/25/2014 14:11:08.43 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq be11a89c-fbe8-a08d-57d2-afa6a4948743
    07/25/2014 14:11:08.43 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=1.3859 be11a89c-fbe8-a08d-57d2-afa6a4948743
    07/25/2014 14:11:08.47 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
    07/25/2014 14:11:08.47 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.49 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|fa\cbuchholz, ClaimsCount=167 be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50 SharePoint Foundation Files ak8dj High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50 SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 4224 byte file stream be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.50 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=11.7341 be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2az Verbose GetPartitionPropertiesCache :: Getting Cached object be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ay Verbose GetPartitionPropertiesCache :: Found existing cache in httpcontext be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.54 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.54 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0583 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://lnkd.in/bb6rsHj. be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.55 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.55 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0456 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.55 SharePoint Portal Server User Profiles ajw8l High Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database. at Microsoft.Office.Server.UserProfiles.UserProfile.Load(SqlDataReader myReader, Boolean bFirstRead, Boolean firstReaderIsViewerRights, Boolean includeColleagueRecords, Boolean includeLanguageAndRegionalSettings, Boolean shouldCloseReader) at Microsoft.Office.Server.UserProfiles.UserProfile.RetrieveUser(String strAcct, Guid gAcct, Byte[] bSid, Nullable`1 recordId, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAcct, Boolean doNotResolveToMasterAccount, Boole... be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.55* SharePoint Portal Server User Profiles ajw8l High ...an forceUserIsSelf, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfileManager.GetUserProfile(String strAccountName, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds) at Microsoft.SharePoint.Portal.WebControls.ProfilePropertyLoader.LoadRequestedUserProfile(String& redirectionUrl)) be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.55 SharePoint Foundation General aat87 Monitorable be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.55 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.55 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,20 ajji6,3 agb9s,10 ak8dj,1 b4ly,25 adyrv,1 adyrv,4 adyrv,3 ajw8l,1 aat87,3 ajji6 be11a89c-ebeb-a08d-57d2-a513d117e184
    07/25/2014 14:11:08.55 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=78.9958 be11a89c-ebeb-a08d-57d2-a513d117e184

    Have Windows Updates been applied? See my note about this
    https://twitter.com/imorrish/status/491020435039854592
    Look at the URL in the search results. It may have invalid character in which case you can use this fix
    http://blogs.msdn.com/b/spses/archive/2014/06/30/sharepoint-2013-the-search-results-with-5c-the-character-will-become-double-encoded-and-causes-broken-links.aspx
    Regards,
    Ian
    http://sps.cloudapp.net
    Regards, Ian Internet Sites running on SharePoint 2013 http://j.mp/sp2013sites

  • Error in Billing doc posing to FI - Export data missing

    Hi Experts ,
    While releasing SD Bills to Accounting Some export documents are not posted to FI and posting status is given 'G' (Posting document not created export data missing ).
    Please give me solution which data may missing to post export billing documents to FI.
    Amol

    Hi amol
    Go to VF02 and first go to item data -> foreign trade data tab and click on the incompletion log , you will get the list what all to be filled . Once you complete. then go to header data -> foreign trade data tab and click on the incompletion log ,you will get the list of data which has to be filled and you can fill it and save it .
    Then once the billing document is saved it will be passed on to FI
    Regards
    Srinath

  • Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Ok this is bizzare!
    Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
    So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
    AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
    I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

  • I just downloaded ff and it won't open i get a message that my profile is missing or unaccessable how do i fix this?

    i have been using ie and wanted to try another browser. i downloaded ff from the official website. after install was done i tried to open ff from desktop icon. i got a message stating "could not open because your profile is missing or unaccaessable". i also have norton 360. norton said the download was safe. how do i fix this?

    Check out the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • Schedule line item data missing in Purchase order form in ECC6.0

    Hi All,
    We are doing ECC6.0 upgradation project . I am trying to print Purchase order in ECC6.0 , all data is coming fine in PO except schedule line item data is missing.
    Same print program and form works fine in 4.7E but schedule line item data missing in ECC6.0.
    Print program is a copy of standard SAP program SAPFM06P and layoutset is a copy of MEDRUCK.
    If anyone knows if there is any OSS note for the standard print program or any solution please let me know.
    Thanks,
    Sonali.

    Resolved on own.

Maybe you are looking for

  • Cross references from a word file

    I've already read on this forum Indesign (CS6) has problems with cross references in Word files. (I mean dynamic references like "see page/paragraph/chapter x".) Whenever I see them, I just delete them in Word and update them manually in the final dr

  • Material description in batch master

    Hello SAP Gurus, My requirment is at the time of Process order relese or GR for FERT material systm should copy the material master text in batch master record for this i have created one characetristic. in CT04 as material description it is assigned

  • Captivate and LMS JavaScript Problem

    We use Captivate and a Plateau LMS. We had an issue with bookmarking within our course. The first lesson worked just fine, but later lessons were not bookmarking. We added javascript alerts to the code to see when the Captivate content was setting LM

  • Viewing RAW images in Aperture

    I cannot find a similar discussion so I'll post this. I cannot view RAW files in Aperture since the 3.5 update to 10.9.  The files import correctly and then when I try to view them in the viewer they turn into a scrambled mess.  I have created a new

  • Windows Media Player in iTunes

    I am wondering if there's a way for me to access in/through iTunes radio stations which offer their online streams in WMP only. Can I add stations to my current iTunes list of radios? Thanks so much.