Create gadget with template

Hello,
I would like create a gadget with a excel template in my code.
My language is ASP 3.0
My plumtree version is the 6
Do you know the instruction to create a gadget with template?
In the plumtree 4.5 version I used this code:
Set gadget = ptSession.Gadgets.Create
gadget.Interfaces("IPTPersist")
Dim ptpbGadget
Set ptpbGadget = Server.CreateObject("Plumtree.PropertyBag")
Call ptpbGadget.LoadFromFile(strTemplatePath & strTemplateName)
Call gadget.Interfaces("IPTPersist").Load(ptpbGadget)
This code doesn't work now.
Have you a solution?
dev2007
Edited by dev2007 at 04/12/2007 5:05 AM

Oh dear. :-(
Whatever you're trying to do, I can assure you that the code above most certainly won't do it in 6.0.
Chris Bucchere | bdg | [email protected] | http://www.thebdgway.com
Edited by bucchere at 04/12/2007 12:19 PM

Similar Messages

  • CV01N - create document with template - path length

    Hi all,
    i want to create a document from a template document with an original file.
    A popup is displayed and i specify the new path for the new original file.
    --> Error when copying from ... <directory>
    Only 50 characters of the directory string are displayed in the message box???
    Any ideas?
    regards

    hi,
    go to trasaction dc30
    If you are using word file, then select it and click on define template for original file. Make new entry, define all things
    like  Document Type
    Applic.
    Language
    No
    Description
    Copy from...............
    this way you can maintan the template for original file.
    create new document, cleck on create original.
    once you click it, there is a button create with template.
    in dc20 ,click Define data carrier type "server, front end".
    if you are not using content server , then say default entry.
    regards
    nitin
    Award point if useful.

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • User is having a save issue with Word 2007 documents created from a template.

    I have 1 particular user, out of approx. 30, that is experiencing an intermittent problem when trying to save a Word 2007 document to a network drive.  The particular error is
    "Word cannot complete the save due to a file permission error. (xxx.docx)"  CTRL-SHIFT-I Error Code is: 701743
    This only happens while he is working in a document created from a template (.dotm) file I made a few months ago.  The problem has never occurred with any other Word docs or Excel, or any of the other users accessing the template to create documents. He
    also gets an error message stating
    "xxx.docx cannot be found.  Check your spelling, or try a different path."  CTRL-SHIFT-I Error Code is: 200635
    But this only occurs when trying to "Save As"  The odd thing is that if he renames the file to something like xxx1.docx, it will allow him to save on the network folder with no issues.  And as mentioned, this is intermittent - he may go weeks without
    seeing the message while doing nothing different.
    I have tried search for similar issues in the forums but they don't seem to match exactly what is happening to us.  Our 3-man IT department seems to be at a loss and I have had good luck solving other issues in this forum so I thought I would give it
    a try.
    Any ideas would be appreciated.
    Thanks,
    Adam

    Hi,
    It's seems temporary internet folder corrupted, please try to modify the location for temporary Internet files for Internet Explorer test this issue:
     1.In Internet Explorer, choose Internet Options from the Tools menu to display the Internet Options dialog.
     2.In the Internet Options dialog, click the General tab. In the Browsing history section click Settings to open the Temporary Internet Files and History Settings dialog.
     3.In the Temporary Internet Files and History Settings dialog, click Move Folder to open the Browse for Folder dialog.
     4.In the Browse for Folder dialog, select the following location.
    C:\Users\<user name>\AppData\Local\Microsoft\Windows\Temporary Internet Files
    5.Click OK to close the Browse for Folder dialog. Click OK to close the Temporary Internet Files and History Settings dialog. Click OK to close the Internet Options dialog.
    6.Reboot the computer.
    More detailed information you can refer to below link:
    http://blogs.technet.com/b/ryan_christiansen/archive/2008/04/28/word-2007-file-save-errors-an-error-is-displayed-when-attempting-to-save-a-word-document.aspx
    If this problem still persists, please refer to this article troubleshooting problems:
    http://support.microsoft.com/kb/921541
    Best regards.
    William Zhou
    TechNet Community Support

  • How to create a web template with company logo

    how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
    2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
    thanks to you all

    Hi
    1) Please read
    http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
    2) Create a condition in the Query Designer: Use a formula variable
    See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
    Heike

  • How to Create User Defined Template in Back Office with Labels and Tags App

    Hello,
    Can anyone help me in creating a user defined template in Back Office with Labels and Tags Application. I'm currently using version 13.2.?
    Kindly help me out asap.
    Thanks,
    Monica.

    Hi Monica
    Third party software is available,from AccessVia, that can be used to create and update templates. Sample sample sqt can help you to understand the required inputs (batchID, templateID, departmentID, locale).
    Thanks
    Himanshu

  • Editing site created with template: can't see nav menu

    This is potentially a stupendously dumb question but I have
    never used DW templates before with editable/noneditable regions,
    and I need a little guidance.
    I am using DW8.
    I am preparing an estimate to make some minor changes to a
    website that was created using DW templates. I downloaded and saved
    a few of the HTML files, the css file, the default.dwt file, and
    the lbi files to my local drive so I could noodle around in there
    and scope things out. The odd thing is that the navigational menu
    is missing from the downloaded files. Will the answer be obvious
    once I have access to the full directory of web files? I did see
    code for an alternative menu for older and Mac browsers, and there
    is js language instructing to "write menu to screen" if that helps.
    Code for the dwt file is attached.
    Thanks so much in advance

    > and there is js language
    > instructing to "write menu to screen" if that helps.
    then the menu is probably all or partly JavaScript.
    Code for the dwt file is
    > attached.
    "attachments" don't transfer to the newsgroup version
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Help asap - creating Web page with templates

    Hi,
    I need help asap, im using BPC Web (my system BPC 75 SP04, MS version and there is not a lot of info on the web).
    How can I create a web page using one of my Excel templates (the ones created for the application, to upload data)...
    I've tried searching the templates inside Web ready Files but doesnt work for me... the only files available that appear are Temp.txt
    I read about reports... but these are supposed to be created via "build a dynamic report"  and i already created all my templates in a certain way. Also, Web ready Book  only works with REPORTS right?
    Thanx in advance.
    Velázquez

    Hi Sorin,
    Thank you so much for the response, just want to clear this out:
    You wrote:
    1. Excel reports can be used just with BPC Excel client.  -  do you mean the "BPC dynamic reports"?
    2. You can not use these reports into Web. - my excel reports?
    Regards
    Velázquez

  • Create project from template failed with "badly formed pathname" error message

    Hi,
    I am trying to create a project from a custom template, but I am getting the following error message prompt:
    LabWindows/CVI could not create
    Test_Project
    because of an error: Badly formed pathname
    However, when I checked the target project directory, I see the project files are copied correctly.  I don't know if there is something missing from our custom templates?  Of, if there is something wrong with our custom template?
    I am using LabWindows/9.0
    Thank you.
    Peggy

    Hi Peggy,
    Did I understand you correctly that the files for the new project appear to have been created, but the error dialog still shows? In addition to Wolfgang's suggestions, take a look at the help section on New Project and File Templates. This describes everything that should be needed to create a custom template. Also, try to create a new, very basic custom template and make sure that you can use it successfully. If you can, start adding in the functionality of the original template, and test along the way. Hopefully either this new one will work once you finish, or you will see at which point it is breaking, and we can debug from there.
    Best Regards,
    John M
    National Instruments
    Applications Engineer

  • Is there any Bridge template for creating webgallery with a integrated musicplayer

    Hello everybody,
    in the past with cs4 I was able to create webgalleries with music in it. In cs5 & cs6 this templates are missing - template with no integrated musicplayer. Are there some template for cs6 ( Bridge ) arround with a integrated musicplayer?
    kind regards
    Silvano

    You cannot enforce something like that. You have some options when the field is set up to allow rich text formatting, but the user can always change it.

  • Ecc6 Create with Template

    Hello,
    We have upgraded to ECC6.
    When creating a new DIR(with DOC type REP) and adding a orginal with the "Create with Templates" option. When I click on Save, in the Create Document: Initial Screen. The correct DIR number displays in the Document field, but in the Document Type field it shows the Templates Document type(ZZZ) and not the Doc type I was creating.
    When going into Change/Display mode and replacing the ZZZ in the DOC Type field with the Correct Doc Type REP. It opens the DIR.
    Another scenario is when creating a REP doc type. Saving it. When I go into change mode and add an original via the "Create with Template" option and save the DIR. The templates details are shown in the ChangeDocument: Initial Screen and not the REP DIR I created.
    The REP DIR however successfully added the template as the original.
    I have searched for notes, but was unable to find any.
    Kind Regards,

    Hello,
    Pradeepkumar, Yes you are on the right track with what I mean with configurating DIR 123 ZZZ to be the template for GV Doc types.  ( I am using ZZZ and GV as Examples for a DOC TYPE) and then using the template to create a uniform way of attaching an original to a DIR.
    In SAP 4.7 the same scenario above, but it works correctly:
    I have a DIR 123 ZZZ with an ORIGINAL attached to it.
    This DIR 123 ZZZ is set up in COnfig to be the Template when creating ORIGINALS for DOC TYPE GV.
    CREATE GV Doc type, Enter Descr, CLICK on Create Original, click on "CREATE WITH TEMPLATE (F5)"
    Original OPENS, make changes, SAVE the original, SAVE the DIR.
    Create Document: Initial Screen displays
    Document : 9000234343 ---> this is the GV doc number
    Document Type : GV--->  In ECC6 it pulls through the Template DOC type ZZZ
    Document Part: 000
    Document Version: 00
    Has anyone that is using ECC6 come across this scenario for DMS?

  • How to create a site template with subsites on SharePoint Online (2013, wave 15)

    I need to create a site template of a site that contains 4 subsites.
    I have tried saving the parent site as a "site template", but when i create a new site based on this template, I don't get any of the subsites created.
    Anyone knows why the subsites are not included in the template?
    Thank you!
    José

    That is by design.  Site templates are a template for a specific site within a site collection and never include sub-sites.  In an On-premises environment you could create a Portal Site Template, but this won't work in SharePoint Online.  To
    build something equivalent in SharePoint online you would either need to use a Sandbox solution or custom client side code.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • ADRMS Server 2012 with exchange 2010, I have created some new templates, they are showing up in owa but not Outlook 2013

    I cannot figure out why my templates do not show up in Outlook, when I manually update the AD RMS task scheduler to run the templates get pulled and placed into the C:\Users\%%\AppData\Local\Microsoft\DRM\Templates
    but when I launch outlook they are not displayed.
    Has anyone encountered this type of problem before?

    Hi,
    Generally, the default Outlook Templates (.oft) is located in drive:\Users\<username>\AppData\Roaming\Microsoft\Templates.
    Firstly, please make sure the Templates have been located in the C:\Users\%%\AppData\Local\Microsoft\DRM\Templates path of your local machine. If it is there, please copy and paste the new Templates to the default Outlook Templates location.
    Then we can right-click the Folder to select Properties in Outlook, and click dropdown next to "When posting to this folder, use:" and select the custom template form in the list. For more information about Outlook Templates, please refer to:
    https://support.office.com/en-au/article/Save-time-with-templates-in-Outlook-8990002c-b3d7-4fc0-a4f4-4f2f94643aa7
    Regards,
    Winnie Liang
    TechNet Community Support

  • How to create PDF Merging Template with Buttons & javascript?

    I am trying to create a PDF template that has buttons that request a file or email be inserted as you progress through the document.
    There will be a drop down menu that has options for different types of "customers", each type of customer will show a different set of buttons.
    Each button, once clicked will prompt for a PDF document to be inserted. Each button will be labeled what it requests. For example, "Receipt", "Title", "Insurance Policy" etc. The documents will need to be merged in the order they were received via the buttons.
    In the end, after all the buttons have requested the specific file, it will merge the selected files into one PDF document.
    Does anyone have some insight or ideas on how to get started on this? I am sure Java script will be involved.
    Thank you! Your help is appreciated!

    Hi Travis ,
    You are absolutely correct ,to get more accuracy ,you will certainly have to use java script to get this task done.
    However if you want to add buttons ,you can do it from Acrobat.
    Tools>Interactive Objects>Add Button
    Please check the button properties if it reduces your work to any extent .Go through all the options and see how it goes.
    Regards
    Sukrit Dhingra

  • Problem with files created from a template

    I've never had this problem before and I can't seem to figure
    out how to fix it. I have DW 8 and we've created a new website, and
    we have a root cfm template named root.dwt.cfm. Everything works as
    normal when you're editing code in the template, but when you go to
    edit code in a file you created from the template, all the text is
    black and it doesn't offer code hints or anything. It's like it
    doesn't know what type of file it is or something? This is the
    first template I've created in DW 8, so is this some sort of bug?
    Is there anything I can try to check to figure out what's going on?
    I'm at a loss.
    Thanks!!!
    Holli

    Show me one of these pages, please.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Wolli World" <[email protected]> wrote in
    message
    news:e35f95$aft$[email protected]..
    > I've never had this problem before and I can't seem to
    figure out how to
    > fix
    > it. I have DW 8 and we've created a new website, and we
    have a root cfm
    > template named root.dwt.cfm. Everything works as normal
    when you're
    > editing
    > code in the template, but when you go to edit code in a
    file you created
    > from
    > the template, all the text is black and it doesn't offer
    code hints or
    > anything. It's like it doesn't know what type of file it
    is or something?
    > This is the first template I've created in DW 8, so is
    this some sort of
    > bug?
    > Is there anything I can try to check to figure out
    what's going on? I'm
    > at a
    > loss.
    >
    > Thanks!!!
    > Holli
    >

Maybe you are looking for