Create "Library" problem Txn GR21

Hi SAP,
When i try to create Library via Tcode GR21 eg: 6O1 (Internal Order), the system popup an error message "Objects with leading numerals may not be created":
Message no. GU301
Diagnosis
You have tried to create an object whose name starts with a number. This is not possible because this name is reserved for delivered objects.
System Response
The system does not create the object.
Procedure
Enter a different name.
How if i want to create this library (6O1)?
I will give points for those who helps me out this problem.
TQ
Regards,
Nazrul

1. Goto transaction GRCT:
   a) Scroll down and select table RWCOOM.
   b) Double-click 'Special Characteristics' on the left tree.
   c) Double-click the line with Field Name 'GJAHR'.
   d) Enter 'E03_CHANGE_GJAHR' in field 'Conversion routine'
      and save it.
2. Goto transaction GR55 and regenerate the report group 6obu.
   (As the report groups 6opl and 6oa1 belong to the same library 6O2
   you should regenerate those report groups as well).

Similar Messages

Consolidating itunes media library-how to shorten file names or how to find the file that is creating the problem?

Hi I've switched to Mac for six months now, so is still new to mac and I am using my old 1TB windows PC side by side for my music collection. Now I have seen the posts already in apple community about consolidating itunes music library but could not get the proper way of doing it. My system and itunes is also saying 'file name is too long' and it stops but the questin is how do I know which file is creating the problem and how do I shorten it?
If anybody can answer I'll be obliged to him/her, because its my 6/7 years of music collection stuck in an old pc. Thanks in advance.
- Javed

By 'it stops' I meant the consolidation process in itunes stops.

The missing library problem.

I understand that there's already a lot of threads about the sudden disappearance of iTunes libraries, however I'm typing this up because I'd like to point out in a bit more detail what I'm seeing happening to my computer, and maybe have a collective of what's going on. This issue has happened to me five times in the last two months since I've updated to iTunes 11. After searching on google I know the missing library problem has existed since the early 2000s; why this glitch has yet to be fixed 13 years later is beyond me. I have personally never had this problem until updating to 11, and seeing the many other threads on here this appears to me to be an issue with this version of the software more than it has been in previous versions.
Before I continue, I have tried the following to fix it:
Simply readded my whole library. It was only wiped again a few weeks later.
Completely uninstalled and reinstalled iTunes. That didn't work either, so it's not just an updating problem.
What I haven't tried
Changing where on my computer iTunes is installed. I have no idea where on the computer might be better or if it will change anything. I have iTunes installed on its default location on my local C: disk.
Importing the music directly from my iPod into iTunes. Can this be done? If so, how? Not everything on my iTunes is a store purchase, most of it is imported CDs and also amazon purchases too. So I don't know if the transfer purchases option works. While this wouldn't fix this current issue, I would like to know how to do this if possible since it would just be a quick fix whenever this happens.
What is happening:
So each time this has happened, what occurs is that like many other people, one day I open my iTunes and everything is in order. Then the next, for no reason, all of my libraries are gone but the music is still on my computer, organized in their files the way iTunes had them done so upon importing. I can't use the .itl files in the "previous libraries" folder because they have also been re-written. Upon opening them, even if their last save was on a day I know everything was in working order, opening them does nothing but give me the same blank default page.
What isn't mentioned in a lot of the posts regarding this issue, is the sudden crop of temporary files in the iTunes folder.
The ones that have cropped up for me personally are the following:
iT 1.tmp
iT 2.tmp
iT 3.tmp
iT 4.tmp
Temp file 1.tmp
Temp file 2. tmp
Those were not there the last time I used iTunes, and they're never there on the days I've used it before and it has worked correctly. However every time my library is wiped, these files suddenly appear without fail, every time. I can't open them, I can't do anything with them except delete them. I believe I remember reading somewhere that this might be an issue regarding with how the program is saving the progress of your library changing, and that the temp files are there until it can "officially" save what has happened to your library. While I didn't change anything in my library in the last couple of weeks, I'm assuming this also counts things like play count.
My own personal opinion
Seeing just how many threads with this issue are popping up, this leads me to believe that this isn't just a problem with my personal computer or my personal install of iTunes 11. These temp files also lead me to believe that as well. In other words, whatever glitch has existed with iTunes since the early 2000s is for some reason running rampant in version 11.
TL;DR:
Please developers, actually look at this library glitch within the program itself. It can't just be an individual user's problem because way too many people are experiencing it.

No worries. You've probably run into one the other threads I've posted to but I'll add my thoughts here anyway...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied and renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

I removed Microsoft Office 2008 but still get Microsoft Autoupdate for it. I can't complete the upgrade because the application is gone. Is there a trace of Office 2008 somewhere creating this problem?

I removed Microsoft Office 2008 but still get Microsoft Autoupdate for it. I can't complete the upgrade because the application is removed, but cannot make the auto update prompt go away either. Is there a trace of Office 2008 somewhere creating this problem and how do I get rid of it?

Thanks for the tip. Went through the process on Microsoft's site and the files that were causing the issue were the com.microsoft files in Library-Preferences. Removed all of those, then opened an Office 2011 application; had to go through some basic setup questions the first time, but I no longer get prompted upgrade 2008.

Creating Library Item results in series of JavaScript error messages?

I've made two attempts to create library items from a page. One is a navigation bar and the other a side bar that has some lists and "non html code" in it.
In both cases as the library item was created I rec'd a series of alerts warning of JavaScript errors.
See attached images, which show just two of the error messages.
It appears that the library item is then created but if I insert it into another document I get more JavaScript error messages.
What do I do to avoid having this JavaScript problem?
Thanks

Troubleshooting JavaScript errors in Dreamweaver

Would trying to manually load NSS Internal PKSS #11 Module create a problem or would nothing happen without a filename in the load window under Security Devices?

Would clicking the load button while NSS Internal PKSS #11 Module is selected and accepting the pop-up window without filling in any more information create a problem for the Firefox 8 program?

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

I would like to upgrade to the next step, but because I have many problems with the version 10.4.11, I'm worried that upgrading would create more problems.

Due to a misunderstanding with [email protected] in September of 2010, many of my applications and important files were put into the trash during a cleaning. The trash hadn't been deleted, so a CleanApp rep told me to drag my important files to a folder on my desktop. They were unable to help me with anymore advice with the exception that if I followed the pathway of the application, I could manually restore it to its proper location.
This was asking a lot of me because I didn't have the experience or knowledge of undertaking such a massive restoration. However, I did the best I could. What had been put in the trash was not just a few files -- there were hundreds of files or apps that I discovered in the trash. As I said, this was a misunderstanding. I was left feeling devastated at what had happened.
Since then, my iMac Intel Core Duo has been running on its last legs. I'm surprised I can even get to my email. As far as using the software that I bought with my iMac, I can't. I just do the basics.
What I have been wanting to do is to upgrade to the next level. However, I worry that if I upgrade a crippled OS X 10.4.11 Tiger, I would be creating more problems than what I already have. Do you agree that an upgrade would make matters worse?

It won't necessarily make it worse, but may not make it better. I am not familiar with the utility you usedm though anything that cleans or maintains your Mac should be avoided unless you know what you are doing and what it does. Probably re-installing software from the official sources (download or CDs) is the best way to ensure missing parts are all replaced.
If this is a core duo and not a core 2 duo then the highest you can go is Snow Leopard 10.6 Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).

Does it create a problem if I only connect the backup external drive every few days for use with Time Machine? Should I have purchased Time Capsule instead?

After a near miss with my 4-year old MacBook, I finally wised up and purchased a WD My Passport for Mac to back up my hard drive. I connected the Passport today and have performed the first full backup. However, I do not wish to keep it permanently connected to the laptop. Does this create a problem if I only connect the drive every few days? Should I have purchased Time Capsule instead?

Hello,
I don't think it'll cause a problem, but I'd disable/turn off Time Machine before disconnecting, then turn it back on after you connect it again.

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

Fetching materials on basis of Division creating perfomance problem

Hi Experts,
i am fetching Data from three table like
select a~matnr a~extwg
b~charg b~werks b~clabs b~cspem b~cinsm
c~vfdat
from mara as a join mchb as b
on a~matnr = b~matnr join mch1 as c on b~matnr = c~matnr and b~charg = c~charg
into table itab_main
where a~spart = p_spart and b~werks = p_werks
and b~lgort = 'FG01' .
it is creating perfomance problem
so my questin is 'is there any index table for mara ?(like vrpma for vbak)'
so we can get all the material on base of division fast.
Regards,
Alpesh
Edited by: Alpesh on Jun 2, 2009 3:56 PM

Hi Alpesh,
How about throwing MARC into the mix. I notice that you are searching with plant, storage location and division. Table MARC has an index on plant named WRK.
If you join MARA and MARC to first determine all the materials that qualify for the given plant and division combination, you can access table MCHB with material (MARA-MATNR), plant (MARC-WERKS) and storage location (FG01) i.e. the first 4 fields in the primary key of table MCHB.
I could not test this theory out because in our system we do not have any data in table MCHB. Your select executes quickly on my system.
Please let me know how this panned out.

Using a newly created Library document to create a list item and attach itself

I have a workflow that moves a document from one library to another.
When a document is moved to a certain library I want to create a list item with a link to the document in the list item. Keep in mind there could be 10 files submitted to the library, so then in my list I would want 10 new list items created for
each file, with a link to the individual file. or is there a way to attach the document to a newly created list item programmatically?
is this possible?

Hi,
According to your post, my understanding is that you wanted to use a newly created Library document to create a list item and attach itself.
I recommend to create a workflow assocaited to the second library, and start the workflow automatically when an item is created.
Then add action as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Using SPmanagementshell to create library ,version enable & Add content type

Hi Folks,
How to create library document,enable version, add content type in every site using SPmanagementshell.
Now i am doing user interface,it is taking more time to do this task.
Please give solution using SPmanagementshell to do this task.
I would be great if someone help.

Hi,
Please try code given below:
$spWeb = Get-SPWeb -Identity http://SPServer
$listTemplate = [Microsoft.SharePoint.SPListTemplateType]::DocumentLibrary
$spWeb.Lists.Add("My Documents","My Doc Library",$listTemplate)
$spDocumentLibrary = $spWeb.GetList("My Documents")
$spDocumentLibrary.EnableVersioning = $true
$spDocumentLibrary.ContentTypesEnabled = $true
$spDocumentLibrary.Update()
#Add site content types to the list
$ctToAdd = $site.RootWeb.ContentTypes["<NAME OF ContentType>"]
$ct = $spDocumentLibrary.ContentTypes.Add($ctToAdd)
$spDocumentLibrary.Update()
Hope it helps!
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered

How To create Library Functions for Validate Items

Hi all,
My form Consists data block blk_user with two items
username and password
Both user name and Password are required Fields.
When user left these items Empty To show Alert
I Created Below Procedure and Called in Form_Level ON-ERROR Trigger.
PROCEDURE pcd_io_alert IS
     itm_name VARCHAR2(20);
BEGIN
     IF Error_type ='FRM' AND Error_code = 40202 THEN
     Message(get_item_property(NAME_IN('SYSTEM.CURSOR_item'), PROMPT_TEXT )||' Should
Not Be Empty');
     SET_ALERT_PROPERTY('ALT_IO',ALERT_MESSAGE_TEXT,
          (get_item_property(NAME_IN('SYSTEM.CURSOR_item'), PROMPT_TEXT ))||' Should Not
Be Empty');
     itm_name := Show_alert('ALT_IO');
RAISE FORM_TRIGGER_FAILURE;
     END IF;
END;
It working fine.
Could You Tell how to call or create this procedure as Library functions and call the created library in form To SHow Alert. Actually I want to create library functions to Validate and Show Alert Mesages.
Regards
R.MaheshBabu.

Hello,
Could you give Some examples or links related to how To create and call library functions For validate Items..For creation you already created one procedure and you called on error. So for creation and call it is clear. Now you are talking about validation for items. It depends on your requirement. As you check validation in items's triggers you can also check validation in function/procedure of library. You can use parameter to pass values and check the validations. And you can create the procedure/function in library like this...
PROCEDURE My_Proc(Parameter_Name IN DATATYPE) IS
Variables Declarations...
BEGIN
-- Here check the validation on the passed value.
EXCEPTION
-- Exception Handling part...
END;
FUNCTION My_Proc(Parameter_Name IN DATATYPE) RETURN DATATYPE IS
Variables Declarations...
BEGIN
-- Here check the validation on the passed value.
RETURN <ANY VALUE>;
EXCEPTION
-- Exception Handling part...
END;
Is it Possible to use system variable ':system.cursor_value' while creating PL/sql library functions?Yes, because it is clear as you used for CURRENT_ITEM like NAME_IN('SYSTEM.CURSOR_item') so you can use SYSTEM VARIABLES.
-Ammad

Every time an email comes in it's preceded by two telephone rings. I don't know what I did to create the problem so I don't know how to resolve it. HELP PLEASE!!!

Every time an email comes in it's preceded by two telephone rings. I don't know what I did to create the problem so I don't know how to resolve it. HELP PLEASE!!!

settings >>>>notifications>>>>Mail >>>>allow notifications >>>off (your choice )
settings>>>sounds>>>new mail>>>>none ( will kill rings )

Get error message could not create library/application support

get error message "could not create library/application support" when trying to install Creative Cloud.

Check your user permissions on the Library folder.
Mylenium

Create "Library" problem Txn GR21

Similar Messages

Maybe you are looking for