Create .MSI for window installer

Hi all,
I just finish created anew application using JDeveloper. The application running on JSwing GUI. My next task is to wrap up all the code and create to .msi so it can be dowload and install into any Windows environment computer.
How can I do this?
Thank you in advance,

If an installer .exe will work as well you should have a look at Inno Setup:
http://www.jrsoftware.org/isinfo.php

Similar Messages

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

Solution: iTunes for Windows installation interrupted

Hi everyone.
From my experience...
If you are running Windows XP Professional and have updated to Service Pack 2, you will not be able to install iTunes+QuickTime.
You will need to un-install Service Pack 2 and then install iTunes+QuickTime. You can then re-install Service Pack 2, but keep in mind that if you try to update iTunes+QuickTime, you will need to un-install SP2 again.
This is if you can't install or update and are receiving a message reading:
"The iTunes for Windows installer has completed.
The installation was interrupted before iTunes could be completely installed.
The System has not been modified. To install this program at a later time, run the installation again.
Click Finish to exit the wizard."
Good luck!

Something is clearly horked up regarding SP2.
Try re-applying SP2.

ICloud for Windows Installation Error Windows 8.1

Updated to IOS 8.0 on iPhone and iPad. Cannot get Contacts from these devices onto PC. Tried removing iCloud and reinstalling but keep getting "iCloud for Windows Installation Error". Data Files in Outlook shows iCloud but states it is Not available. The following error codes are in the error report:
Error: 0x80070005: DataProviderRegistered
Error: 0x8007005: ZebraMapiCopySession::CanCreateZebraStpre: CreateMessageService failed

Nothing? Nobody....

Bonjour for Windows installation issue

When running the installer/setup application for Bonjour for Windows on my PC laptop, the installer quits and gives me the error message: "Explorerplugin.dll failed to register."
How do I resolve this problem?

I'm having a very frustrating experience installing Bonjour. It seems to start the installation fine and then it stops and say it was interrupted. It gets to the point where it is Publishing Product Information and quits.
good gracious. i'm most familiar with that one from older versions of iTunes and QuickTime installers that were based on InstallShield technology ...
is the Bonjour Installer InstallShield-based? if so, perhaps try checking through the following document:
iTunes for Windows installation quits with 1607 error, while publishing product information, or is interrupted
(on the whole, this is much easier to deal with on XP Pro, rather than Home, if it is what is afoot.)

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

AppleMobileDeviceSupport64.msi for windows 8.1

Can someone give me some advice, before I throw away my iPhone 4 !! I am just fed up with Apple's complex, protective software !!
Problem:
My IPhone 4 ( version 7.1.2) is recognised by my genuine, fully updated Win 8.1 , but, not recognised by the updated ITunes .
I have downloaded the ITunes, and extracted ( using WinRAR) the AppleMobileDeviceSupport64.msi, . This file is being rejected, and cannot be installed.
Made a repair, still refused to install.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the iTunes64Setup.exe file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

What filename is Bootcamp looking for when it searches for Windows installer?

I purchased a download file of Windows 7 Home Premium x64 which when downloaded has the filename X15-65733.iso. When opened it provides a diskimage called GRMCHPXFRER_EN_DVD on which are the files and folders for the Windows 7 installation:
autorun.inf
boot
bootmgr
bootmgr.efi
efi
setup.exe
sources
support
upgrade
However the Bootcamp Assistant does not recognize the X15-65733.iso or the GRMCHPXFRER_EN_DVD disk image as the Windows installer. Do I have to rename one of these to something that the Bootcamp Assistant is looking for?

I had to burn the file X15-65733.iso onto a CD in order for my iMac to find it. I had been trying to install from a flash drive (memmory stick)

Strange error when Bootcamp attempts to create partition for Windows

I get a strange error when I tell Bootcamp to create a partition for Windows. I get to the Create a Partition stage. I select 20GB for Windows leaving 91GB (39GB free) for OS X. I then click Partition and it gives me the following error
*The disk cannot be partitioned because some files cannot be moved.*
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
My disk is formatted in Mac OS Extended (Journaled), I have closed all applications (besides Bootcamp Assistant) and I have even restarted and tried again to see if that might help. Nothing. I can't get it to partition. Any thoughts? Can I partition my disk manually through disk utility and then select it in Bootcamp?

Hi,
this gets asked at least a thousand times by now.
Have a look at this thread for solution http://discussions.apple.com/thread.jspa?messageID=10540273&#10540273
Regards
Stefan

Oracle EBS R12.1.1 for Windows Installation

Hi,
Is there a way to install Oracle EBS R12 for Windows (using the express install) without providing the Unix Tookit Directory, Visual Studio Directory, and the Domain info? I do not know where to get these configuration information. Please help.
Thanks,

Hi,
You cannot install Oracle E-Business Suite 11i/R12 without installing all pre-req. OS software. To get these software packages, you need to contact the vendors (the links are referenced in the document below).
Note: 761567.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=761567.1
Regards,
Hussein

ICloud for Windows Installer problem

I can't install iCloud for Windows. I keep getting Windows installer error message. This is frustrating! Please help.

This worked for me...
remove the old icloud software
remove the files in c:\program files\ common files\apple\internet services (not all files will deleted)
remove the files in c:\program files(x86)\ common files\apple\internet services (not all files will deleted)
Re-install iCloud 3.1
Run apple software update
Presto icloud 4 installed successfully

Help? Trying to create partition for Windows...

Okay so I'm trying to create a partition for Windows XP and I go to the Boot Camp Assistant and I have it set to 32 GB and I click partition and it says that I have to "repair the disk." So I go to the Disk Utitlity and I tried verifying my Mac HD and it couldn't even verify. Here's the description:
Verifying volume "Macintosh HD"
Performing live verification
Checking Journaled HFS Plus volume
Checking Extents Overflow file
Checking Catalog file
Incorrect number of thread records
Incorrect number of thread records
Checking multi-linked files
Checking Catalog hierarchy
Checking Extended Attributes file
Checking volume bitmap
Checking volume information
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed
Someone please tell me what does this all mean and tell me how to make the error go away

Hello akl88066
To repair the Macintosh volume, you will need to boot and make the repairs from the install disk as described in the link below!
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8492.html
Dennis

Boot camp asking for windows installer update

I cannot load the osx dvd because it prompts me to update my windows installer. You can click no or update. No closes the whole thing and update gives me an error. Anyone able to help?

Hi afrobat,
you probably need something like this (download from net).
For winXP 32bit ="WindowsXP-KB942288-v3-x86.exe"
for win7 32+64bit ="Windows6.0-KB942288-v2-x86.msu"
"Windows6.0-KB942288-v2-x64.msu"
These are windows applications so install with-in winOS.
They are "Windows Installer 4.5"

FDK8 installer for Windows installs wrong version

I downloaded and installed the Framemaker 8.0 Developer Kit for Windows. It created a folder named fdk8 as expected, but that folder entirely contains the 7.2 version of fdk. Can this be fixed please?
(I am surprised no one has complained before; is nobody using fdk8?)

Nigel,
Here is the place to report the problem:
We can do nothing here. But thanks the info.
Mike

TS5376 is there a fix for iTunes 11.1.4 for Windows installation problem?

I tried the fix in "TS5376: iTunes 11.1.4 for Windows: Unable to install or open" but problem remains. We have the same issue on my dauther's PC (Windows 7 also). iTunes can't open and configure correctly.

Hey MichelHebert,
When you uninstalled and reinstalled iTunes, did you follow these steps below? This section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
from: Step 1 of Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Let us know if uninstalling those components in that order helped the situation.
Take care,
Delgadoh

Create .MSI for window installer

Similar Messages

Maybe you are looking for