Create MSI to configure the Wifi settings

I have a scenario where multiple users must have their Windows 7 laptop Wifi settings configured as per a specified configuration. We don't have a AD environment, hence the configuration cannot be done through GPOs.
I tried playing around with the "netsh" command and found that the Wifi profile can be exported and imported to the wireless adapters, using the following commands:
Export:
netsh wlan export profile name="CorpSSID" folder=c:\
Import:
wlan add profile filename="c:\wlanconf.xml"
A simple batch file can create this profile on any machine, provided the xml is shared and is located in the right folder. The intension is to make this easier for the end user. So was looking around to see if there are any easy ways to create a .msi that
would contain the xml file, and on clicking it would create the Wifi profile on the system. May be there are other better options, suggestions welcome.

Might ask them over here.
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?category=windowsdesktopdev
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

In an iPhone 3GS (or 4G), can a user configure the WiFi power-save to extend battery life?

In an iPhone 3GS (or 4G when I upgrade), can a user configure the WiFi power-save operation to extend the battery life? For example: Can a user turn on/off WiFi power-save operation? Can a user specify WiFi sleep duration? Thanks in advance for any helpful advice.

Yikes! Thanks, Templeton. Do WiFi app programmers have control over power-save settings? For example, can a first VoIP app be more energy-efficient than a second VoIP app?

You may need to configure the connection settings in the deployment descrip

Hi All
I am new to BPEL and going through Order Booking Tutorial (using 10.1.3.4 version of opmn ) .
I have a problem in 'Designing the Database Adapter to Insert Data' Chapter.
I have installed Oracle 10g Express Edition and BPEL Process Manager on my local system.
In the Example it has been asked to create a daabase connection with Third Party JDBC Driver. Instead I have created a database connection with Oracle(JDBC) Driver.So i didnt have to register any third party driver.
I cud access the Order/OrderItems table as well .
I Deployed the same on the server.But while running the process I get following error--
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
nested exception is:
     ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore. [Caused by: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was:
localhost:1521:XE
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have checked several post on this error but every post talks about third party database.I have used Oracle Database only so why/What shud I change anything in oc4j-ra.xml?? This is my doubt .
Pls help me on this .Also Let me knowe in my case is there any need to create the datasource.?I am low at concept of database.
Pls help
Regards
Naveen

Hi
I am trying to insert orader and order Items as given in the Order booking tutorial..
Here are the files description
.wsdl file looks like
<service name="DBInsert">
<port name="DBInsert_pt" binding="tns:DBInsert_binding">
<jca:address location="eis/DB/MyConnection"
UIConnectionName="MyConnection"
ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
mcf.DriverClassName="oracle.jdbc.OracleDriver"
mcf.PlatformClassName="oracle.toplink.platform.database.oracle.OraclePlatform"
mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:XE"
mcf.UserName="system"
mcf.Password="6672B62098892995C8B651EFDF798A59"
/>
</port>
</service>
data source file looks like
<connection-pool name="MyConnection">

<connection-factory factory-class="oracle.jdbc.OracleDriver" user="orabpel" password="->pwForOrabpel" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))"/>
</connection-pool>
<managed-data-source name="MyConnection" connection-pool-name="MyConnection" jndi-name="jdbc/MyConnectionDS"/>
</data-sources>
oc4j-ra.xml looks like
<connector-factory location="eis/DB/MyConnection" connector-name="Database Adapter">
          <config-property name="xADataSourceName" value="jdbc/MyConnectionDS"/>
          <config-property name="dataSourceName" value=""/>
          <config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
          <config-property name="usesNativeSequencing" value="true"/>
          <config-property name="sequencePreallocationSize" value="50"/>
          <config-property name="defaultNChar" value="false"/>
          <config-property name="usesBatchWriting" value="true"/>
          <connection-pooling use="none">
          </connection-pooling>
          <security-config use="none">
          </security-config>
     </connector-factory>
##################################################################3
Still I get the same error .
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_FulfillOrder_4.0_e77c64251e45eb4711a3a093f92e6a86.tmp/DBInsert.wsdl [ DBInsert_ptt::merge(OrdersCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: java.util.MissingResourceException
java.util.MissingResourceException
; nested exception is:
     ORABPEL-00001
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
Pls let me know if something looks wrong in the above files
Thanks
naveen

How Can I pre-configure the proxy settings in Acrobat 8?

We use a proxy server to authenticate users and it's causing a problem for our e-licensing. Is there a place to pre-configure the proxy settings / login and password for the e-licensing to happen quietly so our users don't have to see it?

Have you searched the forum for proxy? I do not have an answer, but this has been discussed before. I am not sure there is an answer in the discussions, but it is worth a try. There is likely a knowledgebase article on the issue also. Good luck.

The time capsule option in the wifi settings is not appearing in my iPhone

I recently setup the time calsule at my office and the wifi connection is ok, and when i tried to setup the time capsule on my iphone and ipad there is no option of time capsule on the wifi settings but the option is shown on the apple website http://www.apple.com/timecapsule/wireless.html. Please help......

What operating systems are you running on your Mac and iPhone? (Please always post this when you have a question.)

How to configure the wifi access with specific time slot for kids?

how to configure the wifi access with specific time slot for kids?

Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

Impossible to configure the sync settings in Android (Google Nexus 7)

Hi! Impossible to configure the sync settings in Android (Google Nexus 7). Synchronization can only enable or disable. And you can not set up synchronization in detail.

You are using an external C-series as both a local and external spam quarantine? Interesting, I didn't think that was still supported but I will assume that it will still work and answer the cluster issues.
You can configure an external spam quarantine at the cluster level but local spam quarantines are locked down to machine level. Since you don't want all machines to have the same setting it doesn't make sense to define quarantines at the cluster level. Stick with configuring quarantines at the machine level to reduce complexity. Your description of the existing config is already a bit circular.
You configure the reference for accessing a quarantine at the Network -> IP Interfaces screen. if you want to point one box to the other that's where you would do it.
It's not clear that you actually got the boxes out of sync but I would break the cluster and re-form it, keeping in mind cluster config items on appliances after the first get overwritten, but that's what you want.
Since spam quarantine settings are not normally changed very often, setting them at the machine level should only be a on-time job.

Have an iPhone 4S where the wifi settings gets disabled periodically

Have an iPhone 4S where the wifi settings become disabled at regular intervals (several times a day), any suggestions to what can I do to prevent this? Have factory reset my iPhone without success.
Have also tried to upgrade the phone and have now iOS 8.1.

Hi there sujo01,
You may find the troubleshooting steps in the article below helpful if you are unable to enable Wi-Fi on your device.
iOS: Wi-Fi settings grayed out or dim
-Griff W.

Upgraded my iphone to ios 5 now the wifi settings is greyed out saying "no wifi"

Hi today i update to IOS 5 on my Verizon iPhone 4 and now my wifi doesnt work. When i go to configure my wifi place next to were it says wifi in the settings is greyed out and says "no wifi". i obviously cant tap it and configure it. I dont know what's going on! it was working on IOS 4.2.10 literally 2 minutes before updating and now it doesnt work! i have NOT dropped my iPhone or spilled anything on it. The update seems to have "killed" my wifi. if anyone can help me that would be greatly appreciated seeing as to how i dont have unlimited data and need wifi

I'm having the same problem with my AT&T iPhone 4.
After installing ios5, WiFi was greyed out in settings. I turned my phone off and back on, and wifi was back. It saw my 2 routers, and allowed me to input my WEP passwords for them, but then, when I went to an app that used wifi, Safari, it wouldn't connect, and listed "Not Connected" Going back into WiFi prefs, it appeared to be searching for networks, but didn't find any. Not my 2, nor any of the neighbors. I usually see 3-4 networks other than my own.
Turn it off and on again, WiFi greyed out again.
Reset all settings - Wifi back, but with the same results as the first time.
Reset network settings - Wifi still greyed out.
I see this has happened at other new iOS releases, but never to me. Hopefully there will be a patch soon. I do have unlimited data, but dang 3G is slow.
I'm going to back up my phone this morning, and do a restore to factory settings, and see what that does, besides totally screw up all my apps.

TS1398 Is it possible to lose the wifi settings so that you can't connect?

Is it possible to lose the Wi-Fi settings so that you can't connect?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to configure the workflow settings in ecc 6.0

hi
this is vinod
i have a ecc 6.0 server but iin that system dont work work flow
how to configure the work flow settings

Hi,
can you look at this
http://sapdocs.info/uncategorized/workflow-introduction/]
Regards,
Muralidhar

How to configure the memory settings based on the number of VSAs for Cisco service control Subscriber Manager?

Hey Good day to all,
please help with this; when installing the Service Control Management Suite Subscriber Manager scms-sm, and at the secound step where you have to determine the system memory settings, there are several attributes to be considered:
the maximum number of the subscribers
with or without qouta manager
number of VSAs used
so, my question is about the memory configuration parameters versus the number of VSAs used, since you must multiply with certain values, set already on a table on the Cisco website, but as shown in the example under the table these values are multiplied to all the attributes except that the example dosn't show the value of the temp-size memory;
so please confirm this to me:
the temporary memory size "temp_size" is not related to the number of VSAs implemented!
this is a screen shot from Cisco website:
thank you in advance for helping

Hi Tessitori,
The best way to cache, index and query that amount of data in Coherence is to use a number of stand alone JVMs (i.e. com.tangosol.net.DefaultCacheServer s) to 'manage' the data. Then access (query) that cache from your application servers instances. For an indexing and querying example take a look at this FAQ item
If you would like to discuss this further please email me at [email protected]
Later,
Rob Misek
Tangosol, Inc.
Coherence: Cluster your Work. Work your Cluster.

Trying to use HPLJ 1102w as a wired network printer. How do you configure the network settings?

I have an HPLJ 1102W and I want to use it as a wired printer on my LAN. The trouble is, the easy setup utility is geared toward wireless networking and the ethernet interface will not get a DHCP address from the LAN. In order to get an IP address, I have to go through the wireless networking configuration settings. Can anyone point me in the right direction on how to use this printer as a wired network printer?
thanks,

Hi,
The HP LaserJet P1102w provide USB or wireless network interface only.
the product do not include any ethernet card, as you may also find by its spesification System Requirements below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01999607&tmp_task=prodinfoCategory&cc=us&dlc=en...
Connectivity: Hi-Speed 2.0 USB port / Wireless 802.11 B/G (P1102w only)
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to create connection objects in the NTDS settings container of a DC with LDIFDE

The following link shows some examples of how to automate creating subnets without having to use the sites and services console: http://codeidol.com/active-directory/active-directory/Site-Topology/Creating-a-Subnet/
My question is how can use LDIFDE to create connection objects? We don't use the defaultipsitelink and are creating the connections manaully. How can I use LDIFDE to create connection objects like this? I have not been able to find any examples on the internet.
Thanks for any replies.

KCC does the job of creating connection object automatically reading site/subnet/sitelink info, so why you need to create manually.
http://blogs.technet.com/b/markmoro/archive/2011/08/05/you-are-not-smarter-than-the-kcc.aspx
Regards
Awinish Vishwakarma
MY BLOG:
http://awinish.wordpress.com/
This posting is provided AS-IS with no warranties/guarantees and confers no rights.

I have a iphone 4s and the wifi settings on my phone randomly went grey and turned off and i dont know how to fix it any ideas?

My wifi isnt working need to know how to fix it because now im using all my data, not sure how to fix it hoping someone will know

How exactly does someone search for a resolution to an issue without the specifics of the issue?
The iPhone never displays any errors with "something about programming".
Before you go any further, stop being vague. READ the error message and post the precise text of the message here or google it. Otherwise you risk wasting time, losing data, or possibly bricking the device by doing unnecessary and irrelevant troubleshooting.

Create MSI to configure the Wifi settings

Similar Messages

Maybe you are looking for