Create new Equipment (t-code IE01) for existing asset

HI Expert,
I have an enquiry on equipment creation via t-code IE01 for existing asset. There are synchronization between Asset Master and Equipment Master which mean both sides will be updated during the creation and changes of master data.
I have create new equipment master via t-code IE01 and has tagged to the existing asset. However after save the creation, new inventory number was generated to the asset master and had overwrite the existing inventory no. Is it because of the synchronization or it is a system standard?
Your answer is highly appreciate.
TQ.

My configuration is "Direct Synchronization After Saving" for both master data (asset master & equipment master).
However, I did not assign the Inventory No Field in asset master as a synchronization with equipment master, so how come system can re-generate new inventory no and overwrite the existing inventory no in the asset master? and what the solution if we do not want system re-generate new inventory no in asset master since it has been effected on the printing barcode sticker for the asset.
Really appreciate your answer.
TQ.

Similar Messages

Creating new equipment category in PM Module

hi guru's
can i create new equipment category in plant maintenance module
plz specify the tcode.
its very urgent
if helpful, person will be rewarded

Hi Gurbir,
The T.Code is 'SPRO'
path in customization is,
IMG --> Plant Maintenance and Customer Serivce --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Equipment --> Equipment Categories --> Maintain Equiment Category
Regards,
Prabhakar

What steps i need to follow to create new P6 8.1 envionment from existing production setup?

Hi Team,
We had existing running P6 8.1 Production environment.
We wanted to create new P6 8.1 DEV environment just same as our production.
May i know what is easiest way to create new environment as same as to existing production setup.
What steps i need to follow for creating new environemnt?
Thanks in advance

What you need to :
Create the App server as the same prod -- WLS as example,
Create the p6 domain in WL;
Install the P6 r81 software;
Clone the Prod's P6 db to the Dev;
Dbconfigure the cloned P6db
Deploy the P6 8.1 ear file which should be the same as the prod's;
Reconcile the P6 81 patches with Prod's.

How to create new requisitioner in sap mm for raising purchase requisition?

How to create new requisitioner in sap mm for raising purchase requisition?

Hi Dear,
There is some link will help you to create Purchase Requisition and other MM Documents.
http://www.docstoc.com/docs/11307932/SAP-MM-Manual-Create-Purchase-Requistion
http://www.r3.duke.edu/training/stepbystep/#purch
http://sapdocs.info/sap/materials-management-2/download-sap-purchasing-user-training-ppt-material/
Regards
Aamir

How to create new logical function codes for Subtype

Hi all
I'm developing an WF that must be started when the user makes any change in a employee position. The problem is that this change can be made by many transactions, I know that it´s possible to do it by PA30/PA40, and today it´s made here using PP01. The Functional Consultant said to me that the better way to map all possible trasactions which made that kind of changes in an employee data is by adding new "Logical Funcion codes" (or Activities) for our specif subinfotypes.
The table that contains such information is T77FLC. How can I add that new activities for a subinfotype, by a costumizing or just adding new entries in this table?
Thanks in Advance

Josie,
You can configure your own workflow events based on HR objects/infotypes/subtypes/update type/activity type combinations using transaction SWEHR3. Look at SWEHR2 for the standard events to get some idea of what you need to enter in SWEHR3.
The relationship between the infotype and the matching business object type is held in SWEHR1.
Regards,
Jocelyn

How to create new logical function codes for Subinfotype

Hi all
I'm developing an WF that must be started when the user makes any change in a employee position. The problem is that this change can be made by many transactions, I know that it´s possible to do it by PA30/PA40, and today it´s made here using PP01. The Functional Consultant said to me that the better way to map all possible trasactions which made that kind of changes in an employee data is by adding new "Logical Funcion codes" (or Activities) for our specif subinfotypes.
The table that contains such information is T77FLC. How can I add that new activities for a subinfotype, by a costumizing or just adding new entries in this table?
Thanks in Advance

Josie,
You can configure your own workflow events based on HR objects/infotypes/subtypes/update type/activity type combinations using transaction SWEHR3. Look at SWEHR2 for the standard events to get some idea of what you need to enter in SWEHR3.
The relationship between the infotype and the matching business object type is held in SWEHR1.
Regards,
Jocelyn

Create new check in code inspector.

Hi All,
I am doing a customizing in code inspector but i don't know whether we can create a new check in code inspector which will check for the performance issues. So please can anyone help me in giving a solution for adding a new performance check in code inspector....... since i am new to ABAP i am unable to figure it out...

Have you really checked that the existing categories "performance checks" and "internal performance checks" do not contain already what you're looking for?
You can create an own check as described in this blog
/people/peter.inotai/blog/2006/11/02/code-inspector--how-to-create-a-new-check
Thomas

Created new Item category, guidence required for assignment.

Dear All,
We have created new Item Category for Advance Booking, now we required guidence from you, in what combination we have to assign Item Category to Sales Order type. i.e.Sales Doc. Type-Item cat.group-Item usage-ItemCat-HgLvItm.
Please advice.
Regards
Prashant

Hello,
We have created new Item Category for Advance Booking, now we required
guidence from you, in what combination we have to assign Item Category to
Sales Order type. i.e.Sales Doc. Type-Item cat.group-Item usage-ItemCat-HgLvItm.
Important fieldsfor Item category determination process:
Define Item Categories*
Define Item Category Groups*
Define Default Item cat grp for Material Type*
Define Item Category Usage*
Assign Item Categories*
The method of assignment of item category is carried out in t-code VOV4 and please have a look into this t-code and you wil have the exact idea regarding the sequence/combination for item category determination.
Regards,
Sarthak

Create new time entry code

Hi Friends,
Please let me know what is Time entry code and how to create the new time enrty code. Which is used Via CATS.
Thanks & Regards,
John

Hi John,
I'll try to answer with wide brush stroke notes. The details will depend on your need where you will need to dive deeper into the IMG.
(1) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Catalog > Group Personnel Subareas for Attendances and Absences. Make sure all of your Personnel Subarea Groupings (PSG) are setup.
(2) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Catalog > Absence Types. Under each appropriate PSG setup your Absence/Attendance Type (A/A Type).
(3) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Catalog > Determine Entry Screens and Time Contstraint Classes. This may have been setup for you in (2) above.
(4) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Counting > Assign Counting Rules to Absence Types. This may have been setup for you in (2) above.
(5) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Counting > Determine Daily Work Schedule Variants for Absence. This may have been setup for you in (2) above.
(6) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Counting > Define Indicators for the Personal Calendar. This may have been setup for you in (2) above.
(7) Like Absences, do the same for Attendances.
(8) For Quotas (like vacation/paid tiome off), in the IMG, go to Time Mgmt > Time Data Recording and Administration > Managing Time Accounts Using Attendance/Absence Quotas > Calculating Absence Entitlements > Rules for Generating Absence Quotas. Review all of your settings.
(9) In the IMG, go to Time Management > Time Evaluation. Here, you may need to adjust your schema, rules and other config. We use a custome schema "ZM04" modeled after "TM04". I had some changes to a custom rule "ZP20" (modeled after TP20). You may have other changes.
I hope this helps send you down the right path. Thanks.
Erik

After upgrade to 6.3.4 cannot create new bookmarks by dragging nor open existing bookmark properties

Just upgraded to 3.64. Now I cannot create new bookmarks either by dragging a URL or trying to create a new one in organize bookmarks. For existing bookmarks when I hit properties on the pop up menu all I get is a title bar that says "bookmark properties for (name of bookmark)" but I can't resize it or otherwise manipulate the title bar to access information or change the properties

Hello Victor.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Creating new "Collection Set" deselects everything for no reason.

In Library mode: Creating new Collection Set performs "Select none" (changes source) for no reason. A new set cannot contain photos (until it has a collection) so there is no reason to change source to it yet. It is behaving as if it were a new collection. I often select photos first, then decide whether they need to be in a collection. If I need to first create a set for it --I lose the selection before I can place them.
Is this "as designed" and am I overlooking something?

If Verizon sent you an STB, it should have been delivered via a delivery service (they use UPS around here). Included in the paperwork should have been a return label that would allow you to drop it off at any UPS store, and the return shipping would be free.
If I were you, I would keep whichever STB and remote look to be in better condition, pack up the other one with any accessories they demand to have returned, and drop it off at whichever service delivered it. Make sure to get and keep some kind of confirmation number that the delivery service has received the box. Though I've never had any problems myself, I've heard a few horror stories about Verizon claiming to have never received the returned merchandise and trying to charge the customer for it. Better safe than sorry.
FYI - The reason that FIOS triggers the spell check is because it is spelled FiOS (Fiber Optic Services).
Find this post helpful, informative or just something you agree with? Click the red ‘thumbs-up’ button.
Did this post solve your problem? Click the green ‘Accept as Solution’ button.

How to create new guest OS as duplicate of existing

Hi all,
If anyone would be so kind as to point me in the correct direction, or give me the steps to create a new guest OS by duplicating an existing guest OS I'd really appreciate such assistance. My details are:
Oracle VM Server 2.1.2
Guest OS: OEL v5 Update 2
Thanks.

clone it...
or cimply create a new guest thru oracle vm manager and from serevr copy the system.cfg and vm.cfg files into the newly created folder of a new guest in running pool.
later once the guest is started u will have to change the name and ip address of the new guest as cloning will create 2 identical guesta.

Problem with creating new view and binding it wht existing ViewSet/viewArea

Hi All,
I created a new view.
Now I am trying to dynamically change the veiw in ViewArea : product of ViewSet : BupaMainViewSet .
I added my new view in the views for viewarea : "product".
Now I wanted to get this new view based on some button clicks on view BupaSearchB2B.
If search Account button is clicked my new View has to appeared. Othewise the standard view in the Product view area shud appear.
I dont know how to do.
Your response will be highly appreciated with your reward points.
kindly assist me on this.
Thanks,
SR.

Hi,
You can find detailed information at the following link:
<a href="https://portal.wdf.sap.corphttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/go/km/docs/corporate_portal/ws%20service%20%26%20support/product%20support/workspace_public/product%20support%20knowledge%20base/crm/crm-ic/crm-ic/icwc_cbk_crm50_290306.pdf">https://portal.wdf.sap.corphttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/go/km/docs/corporate_portal/ws%20service%20%26%20support/product%20support/workspace_public/product%20support%20knowledge%20base/crm/crm-ic/crm-ic/icwc_cbk_crm50_290306.pdf</a>
Please reward points if helpful
Best regards
Reyes

Create New Document - Suddenly Lost Ability for Customer Option

Hi -
All of the sudden I can't create a customer profile when creating a new document. Earlier I selecting the print profile. I tried opening a new document and creating a custome profile but that option is grayed out.
Not sure if this is related but I created custome brushes yesterday but they don't appear today. Is that because of the profile that the brushes were created with and without that profile I won't see the brushes?

I guess I still don't get it. I create a new brush in print profile but when I open a new doucment with that profile that brush isn't there.
Print Profile with New Brush Created
New Doucment with Print Profile

Flash Builder flash pro project doesnt show code hintings for library assets exported for AS ?

Flash Builder flash pro project doesnt show code hintings for library classes exported for AS ? So is there any way I can fix this ? Only way I could think of is export a swc from the fla... is there a more convenient way to do this ?

anyone ?

Create new Equipment (t-code IE01) for existing asset

Similar Messages

Maybe you are looking for