Creating new equipment category in PM Module

hi guru's
can i create new equipment category in plant maintenance module
plz specify the tcode.
its very urgent
if helpful, person will be rewarded

Hi Gurbir,
The T.Code is 'SPRO'
path in customization is,
IMG --> Plant Maintenance and Customer Serivce --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Equipment --> Equipment Categories --> Maintain Equiment Category
Regards,
Prabhakar

Similar Messages

Enabling installation of new equipment category under superior FL and under sup Equip

Hi all,
I've created new equipment category. I can install a piece of equipment from this new category only under a superior piece of equipment but not under FL (the field of superior FL is darken in pop up installation ) . I know I've seen in SPRO where I should customize the equipment category to be possibly installed under FL and Equipment but I can't find it now .
Please advise if you know where.
Daniel.

Hello Daniel,
Follow this IMG path
Tick the Checkbox
Best of Luck
KJogeswaraRao

Create new Equipment (t-code IE01) for existing asset

HI Expert,
I have an enquiry on equipment creation via t-code IE01 for existing asset. There are synchronization between Asset Master and Equipment Master which mean both sides will be updated during the creation and changes of master data.
I have create new equipment master via t-code IE01 and has tagged to the existing asset. However after save the creation, new inventory number was generated to the asset master and had overwrite the existing inventory no. Is it because of the synchronization or it is a system standard?
Your answer is highly appreciate.
TQ.

My configuration is "Direct Synchronization After Saving" for both master data (asset master & equipment master).
However, I did not assign the Inventory No Field in asset master as a synchronization with equipment master, so how come system can re-generate new inventory no and overwrite the existing inventory no in the asset master? and what the solution if we do not want system re-generate new inventory no in asset master since it has been effected on the printing barcode sticker for the asset.
Really appreciate your answer.
TQ.

Created new Item category, guidence required for assignment.

Dear All,
We have created new Item Category for Advance Booking, now we required guidence from you, in what combination we have to assign Item Category to Sales Order type. i.e.Sales Doc. Type-Item cat.group-Item usage-ItemCat-HgLvItm.
Please advice.
Regards
Prashant

Hello,
We have created new Item Category for Advance Booking, now we required
guidence from you, in what combination we have to assign Item Category to
Sales Order type. i.e.Sales Doc. Type-Item cat.group-Item usage-ItemCat-HgLvItm.
Important fieldsfor Item category determination process:
Define Item Categories*
Define Item Category Groups*
Define Default Item cat grp for Material Type*
Define Item Category Usage*
Assign Item Categories*
The method of assignment of item category is carried out in t-code VOV4 and please have a look into this t-code and you wil have the exact idea regarding the sequence/combination for item category determination.
Regards,
Sarthak

Reason for creating new item category

when should we create a new item category

HI premkumar
A rule of thumb in SAP is "Not to change the Standard Setting" Either it is Order document, item category,schedule line, pricing procedure, delivery type, billing type e.t.c.
Basically it depends on the BUSINESS REQUIREMENT,why we go for customization. 90% of the BR will not fit into SAP STANDARD setting. So, when u have to change any of the existing setting like creating a New sales order document for particular business only ( Foods business..) ( though we generally use TAN as standard item category ) we can derive a cusomtized one as per our needs.
BR needs may be:
1. New Partner Determination procedure
2. New Text determination procedure.
3. New pricing setup
4. New incomplete procedure.
there are a lot more to come. When your Business needs any change in the existing TAN setting, SAP gives u the flexibility of creating new Item category.
Also, if you start changing STANDARD setting ( TAN) as per your needs, SAP doesn't support it when u have some problems or any UPGRADE issue.
This is the real need of CUSTOMIZATION in any Business /CLIENT.
Hope this helps.

Creating new report category in Abap HR

When I try and create a new custom report category, I get a message saying "Choose the key from the allowed namespace". I did use a Z report category (we do have Z report categories that have been created earlier by somebody else). It would be great if somebody could list the steps to create a new report category. By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
I did try using SM30 to create a new entry but got the same message as above.
Thanks.

>
Lakshmi Srinivasan wrote:
By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
> I did try using SM30 to create a new entry but got the same message as above. Thanks.
You can use the Report category HRDKPRNR to meet your reqt.
~Suresh

Create new alert category

Hi there,
I am trying to create a new alert category(alrtcatdef)
I get the following error
Entry CCMS ALERTS does not exist in SALRTCATC (check entry)
ANy hint?
Sabbir

Hi sabbir,
1) Transaction RZ20 is used for creating monitors in CCMS, select Extras --> Activate maintenance functions.
2)Go to monitor (set) --> create, you will get to the following screen:in transaction RZ20 select extras --> activate maintenance functions.
3)Go to monitor (set)--> create, you will get to the screen:
4)click <<< new monitor>>> and select create nodes (F5) button from the toolbox icon.
5)select rule node and hit the continue button.
6)in the next dialog select CCMS_DEFINE_R_SYSTEMS as the rule definition and hit the continue button.
7)Now select <CURRENT> from the match code for the R3 system parameter value and hit the continue button.
Note: pls remember that we are creating a rule Based monitor: we need to make sure NO object checked from the selectable MTE tree.
8) The next step is to create the virtual node to group all the MTEs that we should select from the MTE classes shown in point a. TO do this ,
click on CCMS_DEFINE_R3_SYSTEMS if it is not already selected and hit create nodes (F5) button from the toolbox. now select
virtual node and hit the continue button.
9)in the name field write something like: test rule based monitors and hit the continue button.
10) now click under test rule based monitors to select them and then hit on create nodes (F5)
choose Rule based and hit continue button.
11) On the next screen select CCMS_GET_MTE_BY_CLASS as the rule name and the hit the hit the continue button.
12)Now we need to add each MTE class from point a. to tje following screen on the MTE class
paramater value. select all of them and hit continue button.
13) the next step is to include all MTE classes already defined in point a. you will need to repeat these steps for each
additional class you want to add to the monitor set.
14) After all classes has been included into the monitoring set hit the save button from the toolbox.
15) you will be prompted for a monitor name , write something meaningful.
The new Monitor set should be display
Find the links
http://help.sap.com/saphelp_nw04/helpdata/en/d4/cc823bd26a5c42e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/d60b374e4e7c64e10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e8/e7f0fb1a2511d294d200a0c930df15/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/9e9031c28d47b6e10000000a11466f/frameset.ht
regards
srinivas

Create New Cost centers in HR Module

Dear friends,
i wan't to create new cost centers in SAP
we have different Profiles in our company like GSM,WLN,CDMA,WLNGSM,CDMAWLN,GSM+WLN etc and that in differernt locations
i wan't to create cost centers so that any new employee created should fall under some Cost center.
thanks

Hi,
A small correction to your understanding.
If you go to PO13 and assign the Cost Distribution, it means --> you are assing the cost center to the 'Position', but not to the employee.
Now, while Hiring an employee.. you will be giving above "Position" (which is already assigned with Cost Distribution).. The cost center for the position will become Master Cost center for the employee.
Example
Lets say you have a cost center assigned to the Position and it was your Master Cost Center.
Now If you assign one more Cost Center by using IT0027 in PA30... It becomes your Master Cost Center but not the one assigned to the Position.
Have a good day...!
KK

Creating new bookmark category

I have created several bookmark categories before but I have not been able to do this in Firefox 9. eg Internet, Personal, how do you change the New Folder to a specific new Heading like Business, Private?

See:
*https://support.mozilla.org/kb/Bookmark+folders

Creating new info type in HR module

Hi all,
My requirement is to resave 0000 info type as 0001 on certain condition, can I do that?
Or is it the case that for creating custom info types range should be greater than 9000.
Thanks and regards,
Ridhima

Hi,
Yes infotype can be 9nnn not less than that.
anyhow here are the steps.
) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the Employee Infotype radio button.
4) Select the PS Structure Infotype.
5) Click on Create A separate table maintenance window appears
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on All push button. It takes a few moments.
10) Click on Technical Characteristics. Infotype list screen appears
11) Click on Change(pencil) button
12) Select your Infotype and click on Detail (magnifying glass) button
13) Give T591A as subtype table
14) Give T591S as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on Infotype Characteristics Infotype list screen appears
18) Click on Change (pencil) button
19) Click on New Entries
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypes infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement
25) In the PM01 initial screenSelect Screen radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select Layout Editor and click Change.
27) Screen default layout appearshere you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Dont forget to Activate at every level)
Feel free to revert back.
--Ragu

Equipment Category

We have created an equipment with external number range and category 'M'. Then we realized that 'M' is wrong equipment category and put deletion flag on the equipment. Then we created new equipmnet with equipment category 'P' but system gives an error that equipment already exist, though we have putted deletion flag on wrong equipment. 'M' and 'P' have different reference category. How can we create new equipment with same equipment ID ? Is it possible to archieve the wrong equipment and then to create new equipment with 'P' as equipment category. Please give some information. What is t code to archieve equipments.
Regards,
VM

Hi
I am not sure how this is useful
any how check it out
If u go for archive.. u need to config content server, where the data will be served... i think this is complicated process..
If u want to archive...
[Archive PM orders|http://help.sap.com/saphelp_46c/helpdata/en/8d/3e6552462a11d189000000e8323d3a/frameset.htm]
[Deletiing Orders|http://help.sap.com/saphelp_46c/helpdata/en/f0/201138d7f011d395c800a0c93029cf/frameset.htm]
Also check with this note.. u will be finding the details how to archieve the objects,,,
[577847|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=577847]
- Pithan

Setting for new item category

Hi friends,
Company's requirement is to Create new Item Category and respective settings for normal business process.
please let me know, what all the mandetory setting which i need to do for normal business process.
As i know , item category determination in VOV4.
please tell me, the main mandetory setting which should be maintained.
thanks in advance.
VARMA

Dear Ravi Varma,
Please copy the standard ITEM CATEGORY based on your scenario and then save in VOV6.
Assign the same for your document type in VOV4.
Another important thing you have to keep in mind is you have to include this NEW ITEM CATEGORY in the copy controls as well.
(in VTLA & VTFL)
Please check and revert back.
Thanks & Regards,
Hegal K Charles

New Vauation Category for Spit Valuation

Dear All
We want to create new Vauation Category for Split Vauation.
However when I try to create new Vauation Category say Z by going to "Gobal Vauation Categories" and click create the new Vauation Category is not created.
I see a message that "No Changes are made"
Am I missing something here?
Regards

Dear All
The problem got resolved.

How to customize Category and Category items list while creating New Model

Hi,
what the most convenient way to customize the Category and Category items list while creating New Model?
This is standard:
Now, what we want to achieve, is to customize this menu, to:
1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
1. Customize the standard New Model menu window
2. Create copies of City Planning Diagrams with different set-ups
3. Set the relationship between diagrams
Is such a configuration change possible?
Thanks a lot for your help!
Regards,
Rafal

Now, what we want to achieve, is to customize this menu, to:
Question #1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
Click on Tools => General Options=> Model Creation
Click on Properties => at right of Default category set
Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
To create a new category set with BPMN choice
a) Copy default.mcc in MyNewDefault.mcc file.
    Go to Tools=>General Options=>Model Creation : Select your new category
    Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
or
b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
    Quit the window.
    Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
    Edit properties and remove all things you does not want keep.
    Save you new category
Question #2. How to define copies/replicas of existing diagrams
     Wrote an extension
Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
     Specify yours conditons in your extension attached to your model
     Example : When the user want create a child diagram : You can display a list of Parent Diagrams to select from.
     You can set in your extension by VBScript parent-child relationship
Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
If I understand well your question. I suggest to take a look in
Repository=>Administration=>Objects Permission Profile
You can specify objects to show, mask, deactivate at model level.
You can specifiy your own metadata.
But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
Message was edited by: Benoit Le Nabec

How to create a new rate category

hi,
Could anyone please guide me how can i create a new rate category.
Thanks and Regards
Mahavir

hi,
Thanks for the reply....but what i actually wanted to know the steps actually followed while creating a rate category.
for example :
Rate category : creation of Billing Class, defining Billing Schema and Rate determination etc.
Please guide me about the sequence of activities to be followed.
And one more question is how can i create an account class.
Thanks and Regards
Mahavir

Creating new equipment category in PM Module

Similar Messages

Maybe you are looking for