Create new time entry code

Hi Friends,
Please let me know what is Time entry code and how to create the new time enrty code. Which is used Via CATS.
Thanks & Regards,
John

Hi John,
I'll try to answer with wide brush stroke notes. The details will depend on your need where you will need to dive deeper into the IMG.
(1) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Catalog > Group Personnel Subareas for Attendances and Absences. Make sure all of your Personnel Subarea Groupings (PSG) are setup.
(2) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Catalog > Absence Types. Under each appropriate PSG setup your Absence/Attendance Type (A/A Type).
(3) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Catalog > Determine Entry Screens and Time Contstraint Classes. This may have been setup for you in (2) above.
(4) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Counting > Assign Counting Rules to Absence Types. This may have been setup for you in (2) above.
(5) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Counting > Determine Daily Work Schedule Variants for Absence. This may have been setup for you in (2) above.
(6) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Counting > Define Indicators for the Personal Calendar. This may have been setup for you in (2) above.
(7) Like Absences, do the same for Attendances.
(8) For Quotas (like vacation/paid tiome off), in the IMG, go to Time Mgmt > Time Data Recording and Administration > Managing Time Accounts Using Attendance/Absence Quotas > Calculating Absence Entitlements > Rules for Generating Absence Quotas. Review all of your settings.
(9) In the IMG, go to Time Management > Time Evaluation. Here, you may need to adjust your schema, rules and other config. We use a custome schema "ZM04" modeled after "TM04". I had some changes to a custom rule "ZP20" (modeled after TP20). You may have other changes.
I hope this helps send you down the right path. Thanks.
Erik

Similar Messages

Prohibit new Time Entries and Expenses; Allow old ones to be posted

Hello Experts,
We only use PS with WBSes only (no network activity confirmation)
As wel we use CATS and Travel Management.
We post Time entries via transaction CAT 2 and expenses via PR05.
We have a business scenario, where we have to cancel a project - using a User Status 'CANCELLED'.
We need to differentiate between Time and Espenses posted before and after this status has been set: New ones prohibited,existing ones allowed to be further processed.
We need to prohibit NEW Time and Expenses postings - when the user runs CAT2 or PR05 - the behavior should be similar to teh message that we get when teh WBS status is CREATED.
However we have to ALLOW the approval of T&E and transfer to Controlling for the Time and Expenses that have already been posted before the Project was set tu User status 'cancelled'.
How can we solve this puzzle? Is it a combination of user statuses / transactions or a user exit we have to implement.
It seems that in order o prohibit Time entries the business tansaction 'Actual Activity Allocation' has to be prohibited, butthis prohibits both new time entries as well existing ones to be posted to Controlling.
Same for expenses - only that the business transaction is FI : Postings - prohibited - but it prohibits too much - both new and existing expenses.
Your advise will be highly appreciated.
Thank you,
LT

Hi,
I hope you can use two exits for the validation data with respect to appropriate status from JCDO table along with date for the mentioned WBS element to code, i.e. it for the validation of the entry to be posted whether time or expense.
For CATS : CATS0003
For Travel Expense : RPRCST01
Regards
Avisek Bhardwaj

"Create New System Entry" screen

Hello,
I would like to make pre-configured connection settings available to users in my company. When the New button is clicked in SAP Logon the first screen that comes up is "Create New System Entry" with a text of:
"Select one of the available systems from the list below. If you choose the first entry, you can specify the system parameters yourself."
However the only entry in the list is "User Specified System"
How can I populate that list with pre-configured settings for users to choose?
- Regards,
Richard Bailey

Hi Richard,
Yes the integration between Active Directory and SAP systems management exists. However, the automatic registration of systems in the active directory could have been done during the installation of SAP system itself.
Below could be of help:
SAP Notes 386762 and 608781
http://download.microsoft.com/download/f/3/7/f371bbba-2341-41bf-822d-2c7dd4174756/SS_AD_SAP.doc
http://www.cybersafe.com/d2/prod-and-soln/howto/sapguissoin10min
Regards,
Srikishan

Create new Equipment (t-code IE01) for existing asset

HI Expert,
I have an enquiry on equipment creation via t-code IE01 for existing asset. There are synchronization between Asset Master and Equipment Master which mean both sides will be updated during the creation and changes of master data.
I have create new equipment master via t-code IE01 and has tagged to the existing asset. However after save the creation, new inventory number was generated to the asset master and had overwrite the existing inventory no. Is it because of the synchronization or it is a system standard?
Your answer is highly appreciate.
TQ.

My configuration is "Direct Synchronization After Saving" for both master data (asset master & equipment master).
However, I did not assign the Inventory No Field in asset master as a synchronization with equipment master, so how come system can re-generate new inventory no and overwrite the existing inventory no in the asset master? and what the solution if we do not want system re-generate new inventory no in asset master since it has been effected on the printing barcode sticker for the asset.
Really appreciate your answer.
TQ.

How to create new logical function codes for Subtype

Hi all
I'm developing an WF that must be started when the user makes any change in a employee position. The problem is that this change can be made by many transactions, I know that it´s possible to do it by PA30/PA40, and today it´s made here using PP01. The Functional Consultant said to me that the better way to map all possible trasactions which made that kind of changes in an employee data is by adding new "Logical Funcion codes" (or Activities) for our specif subinfotypes.
The table that contains such information is T77FLC. How can I add that new activities for a subinfotype, by a costumizing or just adding new entries in this table?
Thanks in Advance

Josie,
You can configure your own workflow events based on HR objects/infotypes/subtypes/update type/activity type combinations using transaction SWEHR3. Look at SWEHR2 for the standard events to get some idea of what you need to enter in SWEHR3.
The relationship between the infotype and the matching business object type is held in SWEHR1.
Regards,
Jocelyn

How to create new logical function codes for Subinfotype

Hi all
I'm developing an WF that must be started when the user makes any change in a employee position. The problem is that this change can be made by many transactions, I know that it´s possible to do it by PA30/PA40, and today it´s made here using PP01. The Functional Consultant said to me that the better way to map all possible trasactions which made that kind of changes in an employee data is by adding new "Logical Funcion codes" (or Activities) for our specif subinfotypes.
The table that contains such information is T77FLC. How can I add that new activities for a subinfotype, by a costumizing or just adding new entries in this table?
Thanks in Advance

Josie,
You can configure your own workflow events based on HR objects/infotypes/subtypes/update type/activity type combinations using transaction SWEHR3. Look at SWEHR2 for the standard events to get some idea of what you need to enter in SWEHR3.
The relationship between the infotype and the matching business object type is held in SWEHR1.
Regards,
Jocelyn

ISE 1.1.3 - Notification when ISE creates New Endpoint Entries

Good Morning,
I am interested in learning how to have notifications sent out to a preset list of recipients when ISE 1.1.3 creates a new endpoint entry. The ability to know when a foreign device has been connected is imperative for our mission.
I have looked throughout the entirety of the ISE Settings, but I have yet to find where to enable the functionality to allow for this.
Can someone please point me to the correct menu/setting for this?
Thank You,
David

Thank you for the response.
I read through the documentation that you linked me to, and it appears that i *should* be able to create the rules I require. I have tried many different sets of criteria, and I always receive the same Error Message:
type Status report
message Request not processed - Possible XSS input
description The request sent by the client was syntactically incorrect (Request not processed - Possible XSS input).
From the error, it looks like my criteria set is incorrect, but I have tried numerous different sets, all receive the same error. According to the "Rules" section, under "Unknown NAD" the only Required Fields are "Category" and "Nad Count". I have satisfied both of these fields numerous ways, all with the same output of the above error message.
Any Idea what could be causing this?

Creating New System Entry in SAPGUI 7.10

Brief Description of the problem:
I am unable to create a new system entry in SAPGUI 7.10 Logon Pad. It works fine if you choose "Custom Application Server" as Connection Type but when you choose "Group/Server Selection" instead the Next Button is still grayed out and hence unable to create a system.
Earlier even the Group/Server box never used to get populated but after creating sapmsg.ini, i could go one step further and now I think it looks for some value in Saprouter field in order for the Next button to get activated.
__*What I am Looking for:__*
Can anyone tell me how could I incorporate a saproute.ini, as I not clear on the syntax and I never have to use the sapmsg.ini and saproute.ini in SAPGUI 6.40 for users who are connected to Internal network. so this is something new in SAPGUI 7.10 and I am still clueless on why Internal users have to use saproute.ini.
<route name>=<route>
Here <route> has the following form: /H/<hostname where saprouter is running>/S/<service saprouter is running>
So in the above string, how will I find the service Saprouter is running.
Thanks

Thanks for the response.
It will work if you add "sapmsSID 3600/tcp" to the etc\*Services* file.
In SAPGui 6.40, i used to just have sapms00 3600/tcp and it works.
so in SAPGUI 7.10 looks there is a slight change and need to suffix the SID details also. I still don't find any SAPGui 7.10 documentation regarding the change I did in services file.
Surprisingly SAP support was recomending to add router entry inorder to make it work inspite teling them we don't need to access SAP systems through router since we access them internally. No good support from them and they just jump to conclusions and they keep repeating the same thing over and over again even if you try to make them understand that it's not what you need.
Regards
Vipin

Create new check in code inspector.

Hi All,
I am doing a customizing in code inspector but i don't know whether we can create a new check in code inspector which will check for the performance issues. So please can anyone help me in giving a solution for adding a new performance check in code inspector....... since i am new to ABAP i am unable to figure it out...

Have you really checked that the existing categories "performance checks" and "internal performance checks" do not contain already what you're looking for?
You can create an own check as described in this blog
/people/peter.inotai/blog/2006/11/02/code-inspector--how-to-create-a-new-check
Thomas

To create new time recording groups & thier assignment

Hi All,
How to create Time recording groups. Also I want to assing the time recording groups to respective users.
Can any one help me in this? Whats the IMG path to create these time recording groups?
Please help. points assured
Thanks & reagrds,
Nithi

Hi Devi,
Thanks for your answer. We can assign the administrator in IT0001.
However my requirement is - there are two users will have access to time recording group IA1 (which will be assigned in IT0001)
However two users should be able to appove time for all 5 new time recording groups. How can we to this?
Can you please help.
thanks
Nithi

IDOCs - create new inbound process code Error

Hi
Regarding Zprocess Code in WE42..
Que-1
I have already mainted in BD51 . then
In we42 , When I provide the Zprocess Code and Enter , the following mesages/information I am getting-
-> The ALE table is not yet maintained for process code ZPUR !
-> For entry, access 'Function module for ALE-EDI inbound processing'
Ques-2
When I was proving OBJECT TYPE : blank , I was getting the error as " APPLICATION OBJECT TYPE is not planned ".
Does it means to maintain anywhere..?
Please help in this regard.
Thanks
Kalpesh

Hi KALPESH,
check the below things and try..
Process code <give ur zprocess code>
Description test
Identification <give ur functionmodule>
Option ALE
click on radio button Processing with ALE service
processing type
click on radio button Processing by function module
Now press enter button,now u will get transport request,create the transport request nad then u will get the information message
'Function module for ALE-EDI inbound processing'.Now press enter ,
u will get a new screen..now from the drop down list select ur zfucnction module..
give the application object and press on save button..
now ur zprocess code will be created.
HOPE THIS HELPS

N97 Mini Contacts Creating New Unnamed Entries on ...

I am getting very annoyed at having to restore the contacts on my N97 back to how they should be. My phone syncs with Ovi (latest version) and Outlook 2007. It does this fine but when I restart my phone, it creates a load of new enties called unnamed and duplicates some others but these have no contact details in them so are effectively blank.
So my issue is not with Ovi and synchronisation - well I do not think so. I can sync over and over again, changing contacts in Outlook or on the phone and both locations update as they should.
The issue is then when I reboot the phone, these duff entries are added to the address book. Only solution I have found so far is to connect to Ovi, select the phone before a sync happens, delete all contacts and then copy the Ovi version of the contacts back to the phone again. This is a rubbish work-around.
Hey, what does that Kudos button do?

Here is another question then as this is still not resolved. Can alnyone tell me where the contacts are physically stored on the N97 mini? I have y-Browser and my theory is that the file (if there is one) must be corrupt in some sort of way so that every time the phone restarts, these blank contacts are created. If I can physically remove all the contacts and then recerate them via Ovi Suite, this might cure the issue.
Thanks.
Hey, what does that Kudos button do?

How to create new KM "Entry Point"

Hi Could someone guide me how to create a new Entry Point
(Note:Not the PCD navigation entry point)
"An entry point provider makes one or more folders available as links that you can access from a central point"
Thanks
Rocky

Rocky,
Entry points allow you to navigate from an iView to various KM folders that may
be located in different repositories.
Try these urls
http://help.sap.com/saphelp_nw04/helpdata/en/54/3d754067025537e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e2/2d354036052c22e10000000a1550b0/content.htm
Points are welcome for helpful answers
Regards
Vineeth

Creating new Journal entry

hi,
i am trying to add a new line using DI API in the journal entry lines.
i want to add the partener code but when i insert it i get the chosse from list of G/L acount opened.
Is there somthing special to do to insert the BP Code ?
Thanks for your help.

when you want to add the business partner code to your journal entry you
should set the shortname to the businesspartner cardcode:
oJnl.Lines.ShortName = "C1000"

Urgent:Time Entry Rule Creating Issue on Hitting Back Button

Hello,
We have created a Time Entry Rule to see if one of the Field either a Department or Project on the TimeCard is entered. The validation works fine for the first time when hitting the continue button.
However on hitting the back button the validation fires again although department is there. Here is the snippet of the code.
Can somebody please tell me what is the additional check that i need to perform so as to ensure that it doesnt fir again on hitting the back button.
i NUMBER := 0;
j NUMBER := 0;
l_status NUMBER := 0;
tc_blocks Hxc_Self_Service_Time_Deposit.timecard_info;
tc_attribs Hxc_Self_Service_Time_Deposit.building_block_attribute_info;
pragma autonomous_transaction;
BEGIN
tc_blocks := Hxc_Self_Service_Time_Deposit.get_building_blocks;
tc_attribs := Hxc_Self_Service_Time_Deposit.get_block_attributes;
hr_utility.set_location ('Prior Loop',1);
i := tc_blocks.FIRST;
--hr_utility.trace_on(null,'ORACLE');
hr_utility.set_location ('Entering ff_formulas_pkg.OGER_CHK_TIMECARD_FIELDS', 1);
WHILE i IS NOT NULL
LOOP
IF(tc_blocks(i).scope = 'TIMECARD') THEN
j:=tc_attribs.FIRST;
WHILE j IS NOT NULL
LOOP
BEGIN
INSERT INTO LOG VALUES(UPPER(tc_attribs(j).attribute_category)||' '||tc_attribs(j).attribute6);
commit;
IF (UPPER(tc_attribs(j).attribute_category) = 'ELEMENT - 176' and (tc_attribs(j).attribute6 IS NOT NULL OR tc_attribs(j).ATTRIBUTE3 IS NOT NULL)) THEN
l_status := 1;
EXIT;
END IF;
END;
j:=tc_attribs.NEXT(j);
END LOOP;
END IF;
i:=tc_blocks.NEXT(i);
END LOOP;
RETURN l_status;
Regards,
Gayatri

Hello Tim,
Thanks for the response. The TER is set to Submission/Resubmission.
Can you please suggest me if this is correct? Also could you pls take a look at the code pasted above and let me know if that is correct.
Regards,
Gayatri

Create new time entry code

Similar Messages

Maybe you are looking for