Create OLE DB Data Source in Sql Server Reporting Services

Hi,
I need to connect to a sap bw cube and when i try to create Data Source everything is going well but i can't see my cubes in the catalog field.
any one have experience with it??
Thanks.

Hi Gil,
Check whether the cube is present in the below table.
RSDCUBE: Directory of InfoCubes / InfoProvider.
Regards,
KK.

Similar Messages

Creating alias for Web access to SQL Server Reporting Services

Hello colleagues.
I have MS SQL Server 2012 with SQL Server Reporting Services in domain "domain.local". In the local network at the entrance via Web browser to "mdr.domain.local/Reports" get into Reports of SQL Server Reporting Services and it's work fine.
Necessary that the SQL Server Reporting Services could include via Web browser from alias "reports2.domain.local/Reports". To do this:
1) I created a new A record "reports2" in the DNS leading to IP mdr.domain.local
2) in Reporting Services Configuration Manager on a tab "Web Service URL" in "Report Server Web Service URLs" I add new record "http://reports2:80/ReportServer" (host Header Name: reports2)
BUT "reports2.domain.local/Reports" is not work. When entering to "reports2.domain.local/Reports" I see page "An error in the security certificate for this Web Site..." and when I click "Continue to ...", then "Unable
to find a web page."
What and where I must add/change for work of alias "reports2.domain.local/Reports" by analogy with "mdr.domain.local/Reports"?
I hope for your help.
Thanks.

WooW it's work!!! Thank you
JJordheim you are the best!
With my PKI I create new certificate for "reports2.domain.local" and Import it to MDR server (in Personal). I create new network adapter and configure Reporting Services Configuration on "Report manager URL" tab (for SSL):
mdr.domain.local - certificate "mdr.domain.local" - network adapter №1
reports2.domain.local - certificate "reports2.sygroup.local" - network adapter №2
And all work fine.
If I configure all to 1 network adapter it's doesn't work.
Thanks for help!

Can Centura SQL Base Can be Used as a Source for SQL Server Reporting Services

I have bunch of Centura Report Builder and need to show them inside .NET WPF UI. I was thinking to convert those reports to SSRS and then show. But database here is SQL Base
and want to know whether SSRS supports SQL Base as a source. Also let me know is there a way to show Centura Report Builder inside WPF without converting to SSRS.

Hi JAISH,
In Reporting Services, a set of data processing extensions are automatically installed and registered on both the report authoring client and on the report server to provide access to a variety of data source types. But the SQLBase is not included.
However, custom data processing extensions and standard Microsoft .NET Framework data providers can be installed and registered by system administrators. So we can install and register the data processing extensions and data providers on the report server
to process and view a report; we can install and register them on the report authoring client to preview a report. But data processing extensions and data providers must be natively compiled for the platform where they are installed.
For more information about Implementing a Data Processing Extension, please refer to the following document:
http://msdn.microsoft.com/en-IN/library/ms154655.aspx
As the issue about how to show Centura Report Builder inside WPF, it related to WPF. It is out of the support boundaries of our forum, I suggestion you post the question in the following forum:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wpf. It is appropriate and more experts will assist you.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to disable the future dates in Date pick calendar - SQL Server Reporting Services

Hi All,
I have a scenario to run the report only for the Past days, and i have datepick calendar as a parameter for selecting Start Date and End Date. I want to control the Users by not to select the Future Dates in the End Date. In Other Words, the user should not select beyond the Current Date,
Is there any way for me to control it. Advance Thanks
Regards,
Sundarrajan.

Hi
Here is a solution for ur problem: put the below code in the script, and the add
OnClientDateSelectionChanged="checkDate"
in the calenderExtender... u ll get the answer nicely.. Happy coding..
<script type="text/javascript">
function checkDate(sender,args){
alert("You cannot select a day greater than today!")
sender._selectedDate = new Date();
sender._textbox.set_Value(sender.selectedDate.format(sender._format))
}</script>

Data Driven EMail Subscription in SQL Server Reporting Services...

Hi,
I have a clarification in SQL Server Reporting Services Data Driven Subscription. We have a request to send an email a report based on the report parameter Site . The request is to send email For each site the report is running, email should sent to different recipients list. We have 97 different sites in the Site parameter.
If Report is running for Site C004 the email should be sent to one recipient, if the Report is running for Site C007 , then the email should be sent to another recipient. Here we have been requested to do with Data-Driven Subscription. How to send the report as a email for each site for different Recipients using Data Driven EMail Subscription.
Please give us a suggestion to overcome this problem.
Thanking You...

Hi David,
Thanks for your comments. We understand the Data Driven subscription, but we dont know how to write query for this subscription. here is our scenario.
There are list of sites in the table. like C004, C007, C008 etc..... in the report,
We have Site parameter (All Sites (default), C004, C007 etc....) and also date range parameter (Start Date, End date) (which are not defaulted in the report) and other 2 parameters. Here we need to send the report to different recipients based on the site. C004 report results should be develivered to one recipient, C007 site results should be delivered to another recipient and so on....
As we are new to Data driven subscription, can you explain how to create table that will be saving the email recipients list and the query that we are specifying in the Data Driven Subscription. Please help us to how to create the data driven subscription for the above scenarion.
Thanks and Regards,
Sundarrajan.G

SQL Server Reporting Services Configuration Error(Subscription)

I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
I also have few questions regarding Configuration;
What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
Here is the error I am getting in the log file..
ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
more information., AuthzInitializeContextFromSid: Win32 error: 110;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
   at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
   at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
   at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
   at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
secondaryStreamNames)
   at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
I also get following error when I try to create email Subscriptoin
w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
error code 0x6e.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
   at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
   --- End of inner exception stack trace ---
Thanks,
RP

Hi RP,
For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
1. Backup the encryption key using Reporting Serivces Configuration Manager.
2. Change the service account using Reporting Serivces Configuration Manager.
3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
For your others questions, please see the following inline reply:
--What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
--What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
--What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
For more information, please see:
Configuring the Report Server Service Account:
http://msdn.microsoft.com/en-us/library/ms160340.aspx
Execution Account (Reporting Services Configuration):
http://msdn.microsoft.com/en-us/library/ms181156.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Report Builder 1.0 for SQL Server Reporting Services 2008 R2

We are trying to implement Ad-Hoc Reporting using SSRS 2008 R2.
First of all, it is very unhelpful that all SSRS books are for either 2008 or 2012, even though SSRS has major changes in 2008 R2 compared to 2008.
Our instructional materials indicate that we should build Report Models to abstract out our databases into terms familiar to our business users.
The problem we are having is the difference in functionality between Report Builder 1.0 and Report Builder 3.0. Report Builder 3.0 is touted as having the modern, ribbon based interface that is supposed to make end-users feel more comfortable. However,
all the documentation says that end users are supposed to use Report Builder 1.0 for Ad-Hoc Reporting. And, it seems, that the reports generated by Report Builder 1.0 are not round-trip compatible with all the other reporting tools for SSRS 2008 R2.
The documentation we have illustrates that Report Builder 1.0 is nice for Ad-Hoc reporting, because is based on connecting directly to Report Models, and the end users can directly drag-and-drop entities and fields into their reports.
When we try working with Report Builder 3.0, it seems we must first connect to the Report Model as a Data Source and then build a Dataset query on the Report Model. Only then are some entity attributes available to be dropped into the report.
If the user decides another source column is needed, they have to go back, edit the query, save the query, and then drag the column from the Dataset to the report. This does not seem end user friendly at all!
We are also concerned that if we train our users on the seemingly soon-to-be-obsolete Report Builder 1.0, and get them used to having direct Report Model access, that at some point we will have to move them to the Dataset-interrupted approach of Report Builder
2+. Highlighting this perception of impending obsolescence of Report Builder 1.0 is that in our shop that is starting with SSRS 2008 R2, we cannot figure out how to get a copy of Report Builder 1.0 in the first place.
We just don't see our end users being savvy enough to handle the steps involved with creating Datasets on top of Report Model Data Sources. So we would have to build the Datasets for them. But in that case, what point is there in creating any
Report Models in the first place if DBAs are the ones to make Datasets?
As such, it is hard to envision a forward-looking SSRS implementation that has the end user ease-of-use Ad-Hoc reporting that the SSRS 2008 documentation presents.
What is it that Microsoft actually wants/expects SSRS implementers to do?
Dan Jameson
Manager SQL Server DBA
CureSearch for Children's Cancer
http://www.CureSearch.org

Hi Dan,
Report Builder 1.0
Simple template-based reports
Requires report model
Supports only SQL Server, Oracle, and Analysis Services as data sources
Supports RDL 2005
Bundled in SSRS
Report Builder 2.0 or later
Full-featured reports as the BIDS Report Designer
Doesn't require (but supports) report models
Supports any data source
Supports RDL 2008
Available as a separate web download
In your scenario, you want to use Report Builder 1.0 in SQL Server Reporting Services 2008 R2, I am afraid this cannot achieve. Report Builder 1.0 is available in the box in either SQL 2005 or SQL 2008. It is not available as a separate client apps and is
only available as a click once application.
Report Builder 1.0
Report Builder 3.0
Thank you for your understanding.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

I cannot start the "SQL Server Reporting Services (SCE)" service

Attempts to run any of the Windows Computer Reports fail with an error:
Date: 10/29/2008 10:19:30 AM
Application: System Center Essentials
Application Version: 6.0.1251.0
Severity: Error
Message: Cannot initialize report.
Microsoft.Reporting.WinForms.ReportServerException: The Report Server Windows service 'ReportServer$SCE' is not running. The service must be running to use Report Server. (rsReportServerServiceUnavailable)
   at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo()
   at Microsoft.Reporting.WinForms.ServerReport.GetParameters()
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args)
My attempts to start the "SQL Server Reporting Services (SCE)" service fail with an error:
Could not start the SQL Server Reporting Service (SCE) service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
The application log in the event viewer has hundreds of instances of Event ID 107:
Event Type: Error
Event Source: Report Server (SCE)
Event Category: Management
Event ID: 107
Date:  10/29/2008
Time:  10:36:25 AM
User:  N/A
Computer: DC
Description:
Report Server (SCE) cannot connect to the report server database. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help.

Thanks for the link to the Reporting Services forum. I found the fix in this thread:
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3644545&SiteID=1
I had to create a registry key and reboot:
1.
Click Start, click Run, type regedit, and then click OK.
2.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
3.
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
a.
On the Edit menu, point to New, and then click DWORD Value.
b.
Type ServicesPipeTimeout, and then press ENTER.
4.
Right-click ServicesPipeTimeout, and then click Modify.
5.
Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before a service times out.
6.
Restart the computer.
After the reboot, the service was running. Thanks for your help with this.

Verify that SQL Server Reporting Services is installed properly and that it is running.

I am trying to install DPM 2010 on Windows 2008 R2. Running through installation and the server that I'm installing DPM to will also host the SQL instance and Reporting instance. Pretty much choosing all the defaults.
Installation gets to reporting portion and fails. It says that I need to verify that Reporting Services is running.   The exact error is:
Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components copied during installation.
For details, click the Error tab.
DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)
Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
It is running and working, I can go to the URL and see Reports installed.   It grabbed a server certificate which is valid and binds that to 443. I have tried this as well with the certificate removed.
Here is the relative portion of the DPM 2010 log:
[6/25/2010 10:30:01 AM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException: Exception of
type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
*** Mojito error was: PasswordTooShort; 0; None
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
[6/25/2010 10:30:01 AM] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception --->
Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
*** Mojito error was: PasswordTooShort; 0; None
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: ReportDeploymentFailed; 0; None
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.ConfigureReporting(Boolean isRemoteDb)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[6/25/2010 10:30:07 AM] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[6/25/2010 10:30:07 AM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)

Hello,
The real problem is the error UnableToConfigureAccount and *** Mojito error was: PasswordTooShort; 0; None
The reason is due to the new password complexity on Windows 2008 which states the following:
Password must meet complexity requirements
This security setting determines whether passwords must meet complexity requirements.
If this policy is enabled, passwords must meet the following minimum requirements:
Not contain the user's account name or parts of the user's full name that exceed two consecutive characters
Be at least six characters in length Contain characters from three of the following four categories:
English uppercase characters (A through Z)
English lowercase characters (a through z)
Base 10 digits (0 through 9)
Non-alphabetic characters (for example, !, $, #, %)
Complexity requirements are enforced when passwords are changed or created.
Default:
Enabled on domain controllers.
Disabled on stand-alone servers.
Note: By default, member computers follow the configuration of their domain controllers.
Please use a more secure password adhering to the above criteria and DPM should install fine.
Regards, Mike J [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.

Integrating J2EE application with SQL Server Reporting Services

Hello everybody,
I want to integrate a J2EE application with SQL Server 2005 Reporting Services. In fact, it is the first time to be involved in developing an interoperability component between .Net web service and Java application. So I have learned for some time how to pass this challenge. Moreover, I found the following virtual lab is an excellent starting point "MSDN Virtual Lab: Implementing SQL Server Reporting Services with a Java Enterprise Edition (EE) Application" [http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032315323&EventCategory=3&culture=en-US&CountryCode=US]
After going through the lab, I tried to apply the same code in my machine but I have stuck with the following error:
{color:#ff0000}*; nested exception is:*
org.xml.sax.SAXParseException: Premature end of file.
{color}{color:#333333}I use the following tools:
- Netbeans IDE 6.5
- Java SDK: build 1.6.0_01-b06
- Web Server: Apache Tomcat 6.0
- axis Jars (axis.jar, axis-ant.jar, commons-discovery-0.2.jar, commons-logging-1.0.4.jar, jaxrpc.jar, log4j-1.2.8.jar, saaj.jar, wsdl4j-1.5.1.jar)
- Reporting Tool: SQL Server 2005 Reporting Services
I will be so grateful if someone help me. I am waiting your response
this is a snippet of my code :
{color}{color:#333333}
package net;
{color}{color:#333333}
//import java.io.*;
import com.microsoft.schemas.sqlserver._2005._06._30.reporting.reportingservices.*;
import java.io.Serializable;
* @author Abdullah Al Fararjeh
public class NetData implements Serializable
static String[] data;
public NetData(){}
public static String[] getData(String myURL, String searchStr)
try{
CatalogItem[] returnedItems;
String folderName = "/";
returnedItems = FindReports(folderName, myURL, searchStr);
if(returnedItems != null && returnedItems.length > 0){
int count = returnedItems.length;
data = new String[count];
for(int x = 0; x < returnedItems.length; x++){
data[x] = returnedItems[x].getPath();
else
data = new String[] {"No Records Found"};
return (data);
catch(Exception e){
System.out.println(e.getMessage());
String[] s = new String[1];
s[0] = e.getMessage();
return (s);
private static CatalogItem[] FindReports(String folderName, String serverUrl, String searchStr)
try
//CatalogItem find;
ReportingService2005Locator loc = new ReportingService2005Locator();
//retrieve a report from the service locator
ReportingService2005Soap port = loc.getReportingService2005Soap(new java.net.URL(serverUrl));
//set the HTTP Basic Authentication credintials using Stub object methods
javax.xml.rpc.Stub stub = (javax.xml.rpc.Stub) port;
stub._setProperty(javax.xml.rpc.Stub.USERNAME_PROPERTY, "abdullahPC\\abdullah");
stub._setProperty(javax.xml.rpc.Stub.PASSWORD_PROPERTY, "mypassword");
//set up a search condition where the item name contains the specified search string
SearchCondition condition = new SearchCondition();
condition.setCondition(ConditionEnum.Contains);
condition.setName("Name");
if(searchStr != null)
condition.setValue(searchStr);
else
condition.setValue("");
//create an array of SearchCondition which will contain our single search condition
SearchCondition[] conditions;
conditions = new SearchCondition[1];
conditions[0] = condition;
//Call the web service with the appropriate parameters
CatalogItem[] returnedItems;
System.out.println("before port.findItems");
returnedItems = port.findItems(folderName, BooleanOperatorEnum.Or, conditions);
System.out.println("after port.findItems");
return returnedItems;
catch(Exception e){
System.out.println(e.getMessage());
return null;
{color}
Edited by: Abdullah on Feb 8, 2009 3:03 AM

I also need to do this. Were you successful in getting this to work? Is it possible for you to share how you accomplished this?

Integrating Reports from SQL Server Reporting Services

Dear Experts,
I am given the URL to a report from SQL Server Reporting Services. The URL looks like
[http://<report_server_host>/ReportServer/Pages/ReportViewer.aspx?/<category>/<report>&<list_of_parameter_value_pairs>]
When this URL is executed, the user will be prompted for user name and password.
And I am given the following requirements:
- Integrate the report into SAP NetWeaver Portal
- The report has to be passed parameters with values generated at runtime and which must be hidden (because it is sensitive data)
Initially, I have been working on two options:
1. using Application Integrator (portal application: com.sap.portal.appintegrator.sap, portal component: Generic)
2. using URL iView
With the Application Integrator, however, I got the following error:
The operation you are attempting on item "/" is not allowed for this item type. (rsWrongItemType)
I cannot find the solution to this. It looks like the URL which contain "/" after "?" is not appropriate for the Application Integrator.
So I turn my focus away from the Application Integrator, but to using the URL iView instead. And in order to hide the parameters passed, I make the following settings in the URL iView:
Request Method = POST
Fetch Mode = Server-Side
But then I got the following error:
Failed to fetch the content. The response status was 401.
Message:
(I have defined an HTTP system and used it in the URL iView.)
Does anyone know how to fix the errors (either with the Application Integrator or the URL iView)?
Your answers will be much appreciated!
Regards
Sakprasat Sum

Hi
Was a solution for this found?
I am trying to achieve the same thing, create an iView that links to an existing SQL Reporting Services report.
Cheers,
Andrew

Implementing SQL Server Reporting Services with a Java EE Application

Hi All,
I need to find some tutorial on
"Implementing SQL Server Reporting Services with a Java EE Application"
for my j2EE application.
Until now i have searched a lot of sites but have not any thing related to this topic.
I am using apache axis along with SQL Server Report Manager for creating the sql server reports.
I have done upto :
Creating the webservice with the help of report manager.
Now i want to connect it through my j2EE application and want to retrieve some data from that web service.
I have got stuck on the following BOLD lines in my code .
code:
public CatalogItem[] getData(String res, String searchStr) throws RemoteException     {
              ReportingService2005Soap port = null;
              ReportingService2005Locator loc = new ReportingService2005Locator();
              // Retrieve a port from the service locator
              try {
                   port = loc.getReportingService2005Soap(new java.net.URL(res));
              } catch (MalformedURLException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (ServiceException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              org.apache.axis.client.Stub stub = (org.apache.axis.client.Stub) port;
              stub.setUsername("localhost\\Administrator");
              stub.setPassword("servWIN@2007");
              // Retrieve a port from the service locator
              SearchCondition condition = new SearchCondition();
              condition.setCondition(ConditionEnum.Contains);
              condition.setName("Name");
              if (searchStr != null)
              condition.setValue(searchStr);
              else
              condition.setValue("");
    //           Create an array of SearchConditions which will contain our single search condition
              SearchCondition[] conditions;
              conditions = new SearchCondition[1];
              conditions[0] = condition;
    //           Call the Web service with the appropriate CatalogItem[] returnedItems;
              CatalogItem[] returnedItems = null;
              port.findItems("foldername",BooleanOperatorEnum.Or, conditions);
              return returnedItems;
         }i.e. while executing the findItems() method i got the following exception :
System.Web.Services.Protocols.SoapException: The item '/reportingservices' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/reportingservices' cannot be found.
at Microsoft.ReportingServices.Library.RSService.FindItems(String folder, String operation, SearchCondition[] properties)
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions, CatalogItem[]& Items)
Any any body has any idea please help me.
I need it urgently.
Regards.

The above example is mentioned in msdn virtual lab that teaches how to connect to reporting services from a j2ee application.
I have done the same thing .. but i am not able to render the report programmatically .. if anybody knows pls let me know the solution.

Use parameters in SQL Server reporting services with sharepoint lists

I want to make report from sharepoint 2010 list and forms library in sql server reporting services.
but also want to apply parameters.
I tried but parameters but it is not working.
How I can apply sharepoint lists parameters in sql server reporting services ?
How to run or view report of sharepoint lists or form library in sqlserver reporting services with required parameters?

Hi John,
When we use SharePoint list as datasource in SSRS it has two method to add parameter. Suppose we have a dataset (DataSet1) get data from SharePoint list. Please refer to the methods below.
Method 1: We can add parameter in the Query Designer dialog box to add parameter.
Click “Add Filter” icon in the “Applied filters” dialog box in Query Designer.
Select the corresponding field (Title), fill with specific conditions, and select Parameter option in the end of the row.
Create a dataset (DataSet2) fill with Title field.
Double click the parameter we create above, set the available values from DataSet2 field Title.
(Note: In the situation, we are get the single-value parameter.)
Method 2: It is a general method to add parameter in SSRS report.
Create another dataset (DataSet2) in the report fill with Title field.
Add a parameter (Title) get available values from DataSet2 Title field.
Add filter in the DataSet1.
(Note: This method, we can configure multi-values parameter.)
Reference:
http://technet.microsoft.com/en-us/library/aa337432(v=sql.105).aspx
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Connecting to Amazon Redshift from SQL Server Reporting Services

Hey all,
Just a general question for now as the company I work for is looking to migrate our current data warehouse from SQL Server 2008R2 to Amazon Redshift. Currently all of our reports on our intranet are SQL Server Reporting Services reports and
I have been tasked with finding out whether or not we can connect SSRS to Amazon Redshift. I see that Amazon Redshift is a SQL data warehouse and uses industry standard ODBC and JDBC connections and PostgreSQL drivers so many popular software vendors
are certifying Amazon Redshift with their offerings to enable tools to still access RedShift.
If SSRS can connect to Amazon Redshift, can you also advise me on how this can be done so I can begin playing around with it.
Cheers

Hi there,
You might want to try the Windows AMIs.
http://aws.amazon.com/windows/amis/
For local access, you'll probably need to install 32-bit & 64 bit Postgres drivers on the server & developer machines.
http://stackoverflow.com/questions/17323590/redshift-with-ssis-ssdt
http://michaeljswart.com/2013/03/checking-out-amazon-redshift/
Then you'll need to configure connection strings in your data source and test.
http://docs.aws.amazon.com/redshift/latest/mgmt/configuring-connections.html
cheers,
Andrew
Andrew Sears, T4G Limited http://www.performancepointing.com

How to change Rendering Extension in sql server Reporting Services based on User Permissions

Hi,
I want to provide SQL server reporting services rendering extension based on user Access.
For Example
User1 can have options of Rendering to EXCEL and PDF
User2 can have a option of CSV
i read one article which is useful for report basis rendering extension changes. but i want to give user basis rendering options.
http://www.mssqltips.com/sqlservertip/3569/how-to-change-rendering-extensions-in-sql-server-reporting-services/?utm_source=dailynewsletter&utm_medium=email&utm_content=headline&utm_campaign=20150406
Thanks in advance.
GVRSPK VENI

You can use a data driven subscription for that
Maintain a table with rendering extension information for various users ie their AD user login. Then setup a data driven subscription based on table values
You will be creating a dataset with query for retrieving userid as well as rendering extensions and then just set the value as Get value from database for render Format and To properties
For more details refer
http://beyondrelational.com/modules/2/blogs/101/posts/13460/ssrs-60-steps-to-implement-a-data-driven-subscription.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Create OLE DB Data Source in Sql Server Reporting Services

Similar Messages

Maybe you are looking for