Create OSS Notes

I need to create a SAP note. I've tried to enter in SAP Service through SAP Session but it doesn't work.
My account doesn't allow me to search notes and to create messages using SAP but it brings me to SAP Service MArketplace.
How can i craete a message with my account?
Please help me! It's URGENT!!!!

Hi Sabina,
You need a Marketplace UserID and Password which is different from you SDN ID. You need to get that ID and licence from SAP. Take a Service Marketplace ID and then you can create the message on Service Marketplace and can access the OSS notes as well.
I think this solves your Isssue!!
Regards
Pravesh

Similar Messages

Create OSS Note for DDIC Change

Hi Gurus,
I am creating note to incorporate certain DDIC changes,when I am specifying correction instruction, the system asks for Corrective measure.
Can any body help me in understanding what Corrective measures are & some documenents/tutorials where I can find steps about creating OSS Notes.
Thanks in advance,
Regards,
Gaurav

hi ,
Use following link
http://help.sap.com/saphelp_47x200/helpdata/en/79/05f33925f12d20e10000000a114084/frameset.htm
Regards,
Amey

How to create 'OSS ' notes

how to create 'OSS ' notes

Hi
You can't create OSS notes. SAP already provides them.
Only thing is you have to see them and change/modify your programs as per tthe corrections mentioned in them.Again you should have a User id and Password to view them.You can view them through --search notes..
http://www.sap.help.com/
Regards,
Anji
Message was edited by:
Anji Reddy Vangala

How to create OSS note for SAP?

Hi,
How do I create OSS for SAP? Any step by step or notes related?
appreciate your help!!!!!!
Thanks,

Hi Afi,
If you are looking for creating an oss message with SAP follow the path
http://service.sap.com/notes --> Report a Product Error --> select your system --> Enter the search term ( related to your issue) and componenet ( if its basis BC , change management BC-CTC , if its for solution manager use SV-SMG or the sub component )
Now it will show the related oss notes and if that notes are not helpful you can create a message with SAP by clicking create message.
Thanks
Prince Jose

How to Create OSS Message to SAP??

Hi Experts,
I need to create OSS Message to SAP? could you please provide the related info??

Hi,
You need to go to link https://websmp202.sap-ag.de/support. Here you need to enter credentials without which you cannot proceed further. And after entering to this site, you need to create OSS notes according to it's Priority.
BR,
SG.

How to create a Attribute "Type standard table OF" to a OSS NOTE

Dear experts,
I need to add new attributes in a standard class as per one OSS note. I took access key to add new attributes. I have a question.
class name: CL_J_1BEFD
Attribute: MT_GROUP_C350
Level: Instance
Visibility: Private
Type STANDARD TABLE OF mty_result
How do i add the instance attribute because i do not want to give the typing and associated type, instead i have to declare data: MT_GROUP_C350 type standard table of mty_result in class builder private section code.
if you look at the pushbutton between Associated type and Description, for all instance attributes there's a green color lining below the arrow. I want my attribute also to be exactly same.
Though i have access key, in private section the display<->Change button is disabled.
Please suggest me how do i add code in private section of a standard class. i have required access key to change the class.
Thanks,
Alysson

Hi Friend...
Thanks, but the question is...
When I went to transaction se24 or se80, I chose the class CL_J_1BEFD and second I swap to "CHANGE MODE".. after that the pushbutton is blocked... I can create the Attribute mt_group_c800 in the Class (using TYPE or LIKE option), but i can't change the code in the private session even using the assistant to modify it.
When I acess the Button "Detail View" the option "Direct Type Entry" is just unavaliable too, no matter what i do!
I coudn't find a way to create the Attibute like the note Describes (SAPNOTE NUMBER 1575772 - in the attachment of the note)
The changes are contained in the attachment
Follows the instructions retrieved from the file:
Add the following Attributes on the Class CL_J_1BEFD Private section
data:
mt_group_c800 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c850 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c860 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c890 TYPE STANDARD TABLE OF mty_result .
How can i make a way to creat this attributes using "TYPE STANDARD TABLE OF " Option?

Use solution manager to create customer message and apply oss notes

Hello All,
Is it possible to use SAP Solution Manager to create/ open Customer Messages and for the application of OSS notes in satellite systems via solution manager?
Currently, our Solution Manager system is bieng used for Central System Monitoring!
Please let me your your expert thoughts!
Thanks,
Antarpreet

Hi,
By using Service Desk scenario of Solution Manager you can convert an issue to an OSS message and follow it up.
Refer the [Link|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Snote application is also integrated with this Service Desk, you can apply SAP notes to any satellite systems.

OSS note 1480794 for the "Steps to Create endpoints using a "Business Conf

Hi All,
I am nearly complete with the Duet Setup Wizzard but I do still have a few red lights on my check tool.
My main problem is:
When I follow the instructions in OSS note 1480794 for the "Steps to Create endpoints using a "Business Configuration Scenario" XML:"
When I press activate I get the below errors:
Unknown webservice definition with name CustomerERPBasicDataByIDQueryResponse_In_V2 / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPRelationshipContactPersonByIDAndContactPersonInternalIDQueryResponse_In / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPBasicDataUpdateRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPRelationshipContactPersonCancelRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPRelationshipContactPersonCreateRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPByIDQueryResponse_In / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPRelationshipContactPersonUpdateRequestConfirmation_In_V1 / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name MaterialBasicDataByIDQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
Unknown webservice definition with name ProductionBillOfMaterialVariantItemByVariantIdentifyingElementsQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
Unknown webservice definition with name ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
I have restarted the Wizzard a few times to check my setup and I cant find any steps that I have missed that would cause these error's.
Hope you can advise.
Many Thanks
Mike

Hi Sameh,
do you want to go live with the full scope of Starter Service , or do you just needs part of it?
With the steps outlined in the blog everything is 100% supported (this is not a hack, but just another way to configure Starter Services).
However, not all the functionality of the Starter Services will work (e.g. like the Updating / Creation of a new contact). But if you do not need that you are perfectly fine.
I remember that with EhP4 you need to be on SP06 of ECC-SE. Maybe this is also the reason in your case why the service is not available.
Regards,
Holger.

HOW TO CREATE SAP OSS NOTES ID

I am SAP FI certified and i have my certificate but i have only my SUID as written on certificate. now i want to create my OSS NOTES is , along with SUID i need to give password to create ID. please guide me how create oss id

Hi,
Login on sap market place then go to Data Administration------>User Data -
>Request new users.Then give authorization to this user.
Regards,
Pankaj

Creating a OSS note on SAP marketplace

Hi,
I have to create a new OSS note but am not sure where to naviagate to do so. I have recently been given my login. can anyone guide me how to create a OSS note?
Thanks

Hi,
1.Go to www.service.sap.com
2.Click on SAP Support portal ,it will ask user name(Sxxxxxxxxx) and password
3.Click Help& support(its a TAB and next HOME)
4. Report product error.
you see new problem solving request
right side you will see System search.
Customer :XXXXXXXXXXXX
Installation: *
system id :*
You needs to fill required information.
If this helps,please assign points.
Thanks,
Rau

No change request created when applying OSS Note

Hi,
I have applied around 3 OSS Notes to my ECC 5.0 system. I got a promt for the change request creation. I have created a new change request and then saved it.
But when I applied the next 2 OSS Notes, i didn't get any prompt to create or select the existing request.
How can I create a change request for this application of OSS Notes and how to transport them to quality if i dont have a request number?
Thanks
Vijay

Hi Vijay,
I think this is normal if the objects being changed by the OSS Note are already held in an earlier change request owned by you (or others) and has not been released.
Use transaction SE03 to search for the objects being changed by the OSS Notes (you will get object name in the note itself) and find out which change request is holding the object.
Once you find the change request either unlock it or release it (depending on your company process/policies) and then re-implement the OSS Note.
Hope that helps.
Regards,
Siddhesh

OSS note 506603 What is it And where can I get it?

Hello,
I am trying to create my form with a SAP Table wizard connection, when I try to use the Table wizard I got the error: "No such interface supported". I can see in a lot of comments the solution is on OSS note 506603. I was trying to find this patch in the sdn site but I could not find it. I am not sure if it is a document, an exe file, a dll,,, and when I see the same question asking where to get the OSS note 506603 there is no answer, could somebody help me telling me what is this and where can I get the patch? I would really appreciate it.
Many thanks.

Hi Eden,
How are you doing ?
OSS note is the older nomenclature for what is now SAP Notes.
They are available at :
http://service.sap.com/notes
you will need a service marketplace user id to log on.
alternatively, if you do not have access to service.marketplace.
send me an email [view my business card], i will reply with the patch. it is a few hundred kb.
with respect,
amit
the note number 506603 :-
Summary
Symptom
Additional information for SAP.Net Connector that was not included in the guide.
Other terms
SAP .NET Connector, Proxy Wizard
Solution
SAP.NET Connector Version 1.0 has been available since Nov 21, 2002. You can download the software from http://service.sap.com/connectors.
Version 2.0 is also available. Use only the new version for new developments.
Report any problems with the SAP.NET Connector under the components:
BC-MID-CON-DNW for problems with the .NET Proxy Wizard for Visual Studio.NET.
BC-MID-CON-DNC for problems with Communication Runtime.
Known problems
1. The Proxy Wizard terminates with the error message "Exception caught in method createFunction for DD_GET_UCLEN Reason: null".
This is caused by a missing function module, which can be installed as described in Note 580834.
2. Corrections for SAP.NET Connector 1.0
The updated version corrects various problems that have been noted during the interim period. You can download it from http://service.sap.com/connectors. To install this version, see the "Release Notes" file. For SAP.NET Connect 1.x, the newest patch-version is called "1.0.3".
3. Corrections for SAP.NET Connector 2.0
For Visual Studio Integration (Design Time) following problems have occurred:
For proxies with several functions, the following runtime error can occur under certain circumstances: "Method xyz can not be reflected." The cause is a combination of an error in the .NET framework and the way in which the proxy generator uses XML-attributes.
The SAP wizard table does not work. Existing tables are not recognized.
Both problems are solved by the patch attached to this note. Stop all instances of Visual Studio and unpack the ZIP file into the "%Program Files%\Microsoft Visual Studio .NET 2003/Common7/IDE" directory, whereby the "SAP.Connector.Design.DLL" file is replaced.
Header Data
Release Status: Released for Customer
Released on: 10.12.2004 16:40:26
Priority: Recommendations/additional info
Category: Installation information
Primary Component: BC-OP-NET-NCO SAP .Net Connector
Secondary Components: BC-OP-NET-VS Visual Studio .Net Connector Wizard
Message was edited by:
amit chawathe

OSS Note for MIGO "Update terminate (SAPSQL_ARRAY_INSERT_DUPREC)"

Dear all
I am facing problem during MIGO GR reference Others, MVT 561.
Upon clicing Button: Save, I face 2 types of errors intermittently
1. Material document is saved and generated but when comes to displayed, it will say "Document 4900496xxx does not exist in calendar year 2009" And I check in Table: MKPF and it does not exist at all
2. I am not able to save it and face this termination error:
The ABAP/4 Open SQL array insert results in duplicate database record
What happened?
Error in ABAP application program.
The current ABAP program "SAPLGLIU" had to be terminated because one
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and adminis
termination messages, especially those beyond their normal deletion"
I have done my investigation and the number range uder FBN1 for this MVT 561 under this Company Code and Year has been maintained.
Can anyone advise me the OSS note to solve it? I cannot find a direct OSS note on it to solve this.
Thanks.
Edited by: Daimos on Oct 26, 2009 7:58 AM

Sorry Jurgen
I have posted so many material documents using MIGO to test it out and try to update my OMBT there so many times until I lost track what is the current number range when I wrote my question here.
I have read that thread you posted regarding the ST22 analysis [Solution from Jurgen|Document does not exist after creation of PO; . I exported them to HTML and did a detail checking, and I find out it is FI GL there did not update the number range properly which in turns cause my GR to have problems.
Below is my analysis and learning to share with others:
1. Ask the ABAPER to find out which record value the system trying to insert. Copy down this number.
2. Check the OMBT value of Current Number.
3. Then use the MFPK Table to search the latest Number Range.
4. Try to check if the record value trying to insert already exists in Current Number. Normally, it will exist and that is why
    system prompt "insert duplication".
5. Then check if the record value trying to insert already exists in MFPK Number. Normally, it will exists it will exist and that is
    why system prompt "insert duplication". (There can be situation that the Current Number is lower than the MFPK Number,
    but it rarely happen).
6. Replace the Current Number to be the Next Number of MKPF largest Number. Save and it should work.
7. If it is not work, please create a material which is non valuated and perform GR, if GR can be done and we can display
    material doc, it means the error is caused by the FI GL number range error.
8. There can be other issues such as activation of user exits and other.
Jurgen, I got one more question to ask you. I have tried to replace the current number with the largest number of MKPF without + 1. It can solve my problem.
But I wonder why SAP Notes and you suggest us to replace Current Number with largest MKPF value PLUS 1?
Please advise.
Thanks.
Edited by: Daimos on Nov 2, 2009 8:41 AM

Problem while implementing OSS note 1077403

Hi,
I am trying to implement a OSS note ( 1077403) using SNOTE transaction. When I download the note, the status of this note is u201CCan be implementedu201D. It creates few standard programs which are utility programs related to Unicode conversion. While implementing this note, I am facing the issue "Objects can only be created in SAP package" and some of the objects in the note are not created. The note status becomes u2018Incompletely Implementedu2019.
Can you please suggest what could be the issue?

HI,
For more efficence direct link to note Note 1077403 - Cluster table check using SDBI_CLUSTER_CHECK
Have you a basis release version >= 6.20 ?
you can use transaction SNOTE to implement the version for Basis Release 6.20 and higher.
Rgds
Edited by: stéphane mouraux on Mar 1, 2010 6:31 PM

OSS note system

Hello, I could not find a clear answer from search option, sorry for stupid question
How do I access SAP OSS note system, from searching other posts I found you need a user I.D.?
How do you get a user I.D.?
What site do you enter your user I.D. when you get one?
Just want to see a note created for a challange I have but I do not have access to the note system.
Halp please
Edit: also please advise if the note system is the same for every one, if I have a message created by SAP will every one with access be able to view my message (OSS note)?
Edited by: Arakish on Sep 13, 2010 11:37 PM

you can access OSS from internet: http://service.sap.com/notes
an incident you enter there can be seen from all your colleques that work on the same SAP system, but not from anybody else.
you basis consultants are usually the group that has access and can grand access and authority to you

Create OSS Notes

Similar Messages

Maybe you are looking for