Create Report based on Query in SCCM 2012

I have a lot of useful queries, however I would like to create a few reports based on these queries. What is the simple way to do this? I started to create a New Report, but kind of lost after that. Is there a way I can just copy my statement from the
query to a blank report?

Execute the WQL query from the queries node in the console and watch smsprov.log on the site server. It should contain the "translated" SQL statement.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

Create report subscription with powershell in SCCM 2012 R2

Hi all,
I'm wondering if it's possible to create report subscriptions with powershell ? This would save me a lot of time.
Kind regards,
J.M.

If there was any it would be part of the SSRS PoSH cmdlets.
http://www.enhansoft.com/

Create a system properties Query in SCCM 2012 r2

Hi,
I am trying to create a query to find the "Computer description" field information for devices, but i am not sure of what criteria if any to select.
I was able to successfully create a query statement that finds the description information for a device, but that pulls only the AD object field information and not the local device information as described above.

Is this the one?
select SMS_R_System.ResourceId, SMS_R_System.ResourceType, SMS_R_System.Name, SMS_R_System.SMSUniqueIdentifier, SMS_R_System.ResourceDomainORWorkgroup, SMS_R_System.Client from SMS_R_System inner join SMS_G_System_OPERATING_SYSTEM on SMS_G_System_OPERATING_SYSTEM.ResourceID = SMS_R_System.ResourceId where SMS_G_System_OPERATING_SYSTEM.Description != 'Staff Device'

Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.

Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initialized

Hi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Problem for create report by sql query under Protal!

I'm trying create report by sql query method, however it came out the error:
ORA-00918: column ambiguously defined (WWV-11230)
Failed to parse as SENTRYDB - select distinct t1.firstnames, t1.lastname, t4.PERSONGROUP, to_char( t1.dateofbirth, 'DD-MM-YYYY' ) as "Dateofbirth", t3.ADDRESS, t3.CITY, t3.STATE, t3.CODE, t3.HOMETELEPHONE, t3.WORKTELEPHONE, t3.INTERESTING, t3.personid from pnames t1, people t3, groups t4 where t3.persongroup = t4.groupid and t1.personid = t3.personid order by rowid (WWV-08300)
Error: Unable to execute query (WWV-10201)
The query is :
select distinct t1.firstnames, t1.lastname, t4.PERSONGROUP, to_char( t1.dateofbirth, 'DD-MM-YYYY' )
as "Dateofbirth", t3.ADDRESS, t3.CITY, t3.STATE, t3.CODE, t3.HOMETELEPHONE, t3.WORKTELEPHONE, t3.INTERESTING, t3.personid
from pnames t1, people t3, groups t4
where t3.persongroup = t4.groupid
and t1.personid = t3.personid
I have no problem to run that query under sqlplus!

Hi,
I'm cuurently using the portal inside of 9iAs 1.0.2.2.2a. What version of that Portal? By the way, how can I find out the version of Portal that I using? And also can I display image inside of report which created by Portal? I tried statement:
select
'<IMG SRC="'|| decode(IMAGE, '', SJAYARAM309.wwctx_api.get_image_path || 'noimg.jpg',
owa_util.get_cgi_env('DOC_ACCESS_PATH') || '/' || IMAGE) ||'">' stu_pic,
from stu
However, it doesn't work. It came out error:
Unable to describe SQL statement. Please correct it (WWV-13010)
Invalid SQL statement: select '<IMG SRC="'|| decode(IMAGE, '', SJAYARAM309.wwctx_api.get_image_path || 'noimg.jpg', owa_util.get_cgi_env('DOC_ACCESS_PATH') || '/' || IMAGE) ||'">' pic from test (WWV-13005)
ORA-01001: invalid cursor (WWV-11230)
ORA-00904: invalid column name (WWV-11230)
Failed to parse as SENTRYDB - select '<IMG SRC="'|| decode(IMAGE, '', SJAYARAM309.wwctx_api.get_image_path || 'noimg.jpg', owa_util.get_cgi_env('DOC_ACCESS_PATH') || '/' || IMAGE) ||'">' pic from test (WWV-08300)
Do you know why?

Allow users to create reports based on their own selection of fields

Is there a way to allow users to create reports based on their own selection of fields?
And if there is a way, then how?
In access we retrieve all demographic info on one screen and on another screen user can be able to choose specific fields from a list box to import data into file.

Hi,
This can be handled in various ways - but the principles are the same.
You need to apply conditional displays to all of the columns that your user can select and base the display of a column on the value of a field on the page.
You can have a series of Yes/No options - one for each field and base the display on the corresponding field being Yes. Or you can use checkboxes.
However, if you wish to use a multiselect list (which is probably easier as you can dynamically generate the list of field names), you will need to have hidden fields that will store either Y/N or 1/0 (I use ones/zeros) and have the conditional displays watch these fields instead. Populating these hidden fields is a bit more tricky than just having fields on the page that the user can control, but is doable:
1 - Create one hidden field for each field in the report that you want to show/hide. Put these fields in the same region as the select list in a region above the report
2 - Set conditional display values to "Value of Item in Expression 1 = Expression 2" and use the appropriate hidden field for Expression 1 and in Expression 2 enter in 1
3 - Create a page process that runs on submit, and create PL/SQL code something like:
DECLARE
lFields HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
vField VARCHAR2(1000);
BEGIN
:P31_SHOW_EMPNO := 0;
:P31_SHOW_ENAME := 0;
:P31_SHOW_JOB := 0;
:P31_SHOW_MGR := 0;
:P31_SHOW_HIREDATE := 0;
:P31_SHOW_SAL := 0;
:P31_SHOW_COMM := 0;
:P31_SHOW_DEPTNO := 0;
lFields := HTMLDB_UTIL.STRING_TO_TABLE(:P31_FIELDS);
FOR i IN lFields.FIRST..lFields.LAST LOOP
vField := lFields(i);
IF vField = 'EMPNO' THEN
:P31_SHOW_EMPNO := 1;
ELSIF vField = 'ENAME' THEN
:P31_SHOW_ENAME := 1;
ELSIF vField = 'JOB' THEN
:P31_SHOW_JOB := 1;
ELSIF vField = 'MGR' THEN
:P31_SHOW_MGR := 1;
ELSIF vField = 'HIREDATE' THEN
:P31_SHOW_HIREDATE := 1;
ELSIF vField = 'SAL' THEN
:P31_SHOW_SAL := 1;
ELSIF vField = 'COMM' THEN
:P31_SHOW_COMM := 1;
ELSIF vField = 'DEPTNO' THEN
:P31_SHOW_DEPTNO := 1;
END IF;
END LOOP;
END;
4 - Finally, add a button that generates the report - this just needs to submit the page and branch back to the same page
I've used the standard EMP table for this example and my hidden fields are P31_SHOW_fieldname. The code resets the hidden fields to 0, checks if the user has selected the field from the list (P31_FIELDS) and changes the hidden fields value to 1 for all those selected. When the page is re-rendered, the report hides the columns where the hidden field value is 0 and displays those where it is 1. The export option will then only export those fields that are displayed.
You can see an example of this here:
http://htmldb.oracle.com/pls/otn/f?p=33642:31
Regards
Andy

Create a query in SCCM 2012 R2 for NIC Driver Version

Hello,
Is there a way to create a query for the specific NIC driver versions with SCCM 2012 R2? For example I can do this and other descriptors for video i.e.,
select SMS_R_System.Name, SMS_R_System.LastLogonUserName, SMS_R_System.HardwareID, SMS_G_System_COMPUTER_SYSTEM.Manufacturer, SMS_G_System_COMPUTER_SYSTEM.Model, SMS_G_System_VIDEO_CONTROLLER.DriverVersion, SMS_G_System_VIDEO_CONTROLLER.Description, SMS_G_System_VIDEO_CONTROLLER.VideoProcessor
from SMS_R_System inner join SMS_G_System_COMPUTER_SYSTEM on SMS_G_System_COMPUTER_SYSTEM.ResourceID = SMS_R_System.ResourceId inner join SMS_G_System_VIDEO_CONTROLLER on SMS_G_System_VIDEO_CONTROLLER.ResourceID = SMS_R_System.ResourceId where SMS_G_System_COMPUTER_SYSTEM.Model
like "HP EliteBook Revolve 810 G2" and SMS_G_System_VIDEO_CONTROLLER.Description like "%intel%"
Is there a script that will give the version for NICs?
Thanks Bill

This article provides one way to do it:
http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/11/10/inventorying-and-reporting-network-adapter-driver-details-and-how-to-report-only-the-wireless-type-in-configuration-manager-2012.aspx
Jeff

Print layout designer for develop report based on query

Dear Experts/Gurus,
I am amazing about the manage previous reconciliation report. When I opened it using print layout designer, it looks like the report is not built using query, but I am not sure yet. This is very confusing. I created query similar with manage previous reconciliation (MPR), but when I link the query to print layout and try to make similar format/appearance with MPR report (reconciliation management (system)), it is not success.
Isn't the MPR report built not based on query ? I appreciate your answer. TIA
Rgds,

Hi,
I am not sure I understand what's the problem:
Is it the layout that is different or the data?
Regarding the data you can use SQL Profiler (maybe you did?) to find out what queries are fired, but please note that there are some stored procedures in the DB that are used for some specific functions - not sure whether the "MPR" uses any of these.
Then you must include some non-default filter in SQL Profiler...
...but you can also use the logging functionality in B1 for that purpose:
Just activate the logging (see the "log" folder in the B1 subdirectory) in the corresponding config file: choose the option to have the SQLs logged in conjunction with the logging being triggered in all cases (not just error).
Thus you will get all the SQLs - just plain - from the B1 application, but note that it will obviously slow it down!
HTH,
Frank

Problems with report builder 3.0 in SCCM 2012 R2 CU2

Hi All
I have problems with editing (Using Report builder) existing reports or creating new ones in SCCM 2012 R2 CU2
We version of SQL we use is SQL 2008 R2 SP2
I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
Error details are
Following errors were detected during this operation.
* [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at
System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
And in the SmsAdminUI.log I noticed the following error
[16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
[1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
I hope someone can give me some advice , I am lost with this error
Thx in advance
Regards
Johan

Hi Miss Katherine,
1. I went through the SQL steps in the link you posted
2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
server and the console machine.
3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
5. I restarted the server and the client machine
I do get a slightly different error now after using the new DLL
Errors With Original DLL
ERROR DETAILS
* [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.DeploymentERROR DETAILS
Errors With New DLL
ERROR DETAILS
Following errors were detected during this operation.
* [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
- Source: System.Deployment

Reporting services keep failing on SCCM 2012 SP1

I have SCCM 2012 SP1 install with SSRS 2012 install on same server 2008 R2 server.
Reporting services keep failing with the following message when trying to START the service from the Reporting Services Configuration Manager Console
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
Thx,
Joe
Thx, Joe

Good advice Garth, but I have opened over 5 cases to try to resolve this and several other issues with my troublesome SCOM 2012 SP1 upgrade. That is why I am also sending it to the community in hope they can provide assistance.
CSS will only work on one specific issue and in most cases these are targeted bandaid fixes that DO NOT address the underlying or related issues. I a left to opening many tickets and still floundering with a unreliable product.
It seems to only be with System Center. All other products by Microsoft seem to be reliable and predicable and are easily supported using break fix support model of the current MS teams.
It is SQL (SSRS) that controls subscriptions not CM12. CM12 only leverages the APIs provided by SQL (SSRS).
I hate to say this but Why do you think this problem has anything to do with CM12?
If CSS tell you to re-create the subscription and the problem re-occurs then I would re-open the ticket and tell them that the problem is NOT fixed and to continue working on it.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Diplaying of ordsys.ordimage field in a Report based on Query

Hi,
I have a table with a ordsys.ordimage field, where I am uploading images. I created a custom report based on that table but I just cant seem to find a way to show images in it. Could anyone please tell me how to do this.
I tried using this
"portal30.wwv_user_utilities.get_intermedia('CP_IMAGE01','CP_IMAGE01','IMAGE',rowid) the_picture " but this does not help at all
Thanks!
vimpi

Hello Prajwal,
It is definely possible !!
If you have already created your query pls paste the same here so that I can help you otherwise. I will give you a general guidelines and you can take it from there..
Using the CASE Statement inside your SELECT you can achieve this.
SELECT T1.ItemCode AS 'Item No.', T1.ItemName AS 'Item Description',
CASE WHEN T1.QryGroup1 = 'N' THEN T0.Price ELSE 0 END 'List Price'
FROM [dbo].[ITM1] T0 INNER JOIN [dbo].[OITM] T1 ON T1.ItemCode = T0.ItemCode WHERE T0.PriceList = 1

Creating report based on master data

Hi Guys,
I want to create a specific report based on master data in BI cube. for example... a report which takes cost center and period as variable and display expenses for that period and cost center. This report I want to create for all cost center in BI database separately. any idea how can we do this?
There are 2000 cost centers and I need to print/send 2000 reports one for every cost center.
If I store all cost center in excel file, can it be easier?
broadcasting and creating 2000 schedule - not option.
Thanks..SM

Hi stuti misra,
Create ONE Query with selection Cost Center and Period are inputs.
Create text variables for Cost Center and Period and add in Query Description.
After query execution you can see description based on selection in workbook or webtemplate.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Automate USER BASED PACKAGE installations in SCCM 2012

Hi All,
I want to automate the installation of software(in my case a user based package) from the Application Catalog.
Here is just some general information:
1. All software(Applications and Packages) deployed to Device Colllections will be published in Software Center
2. All software(Applications and Packages) deployed to User Based Collections will be published in the Application Catalog
3. Once software has been deployed from the Application Catalog, it is also available/visible in Software Centre .. this could be confusing for (scripted) test purposes!
To Automate installations i tested the following (Powershell) methods:
Methode 1 - Install Device Based Packages (This works)
$SoftwareCenter = New-Object -ComObject UIResource.UIResourceMgr
# to show applications
$Application = $SoftwareCenter.GetAvailableApplications() | where {$_.name -like $APPNAME}
# to install an application
$SoftwareCenter.ExecuteProgram($Application.id, $Application.PackageId, $true)
(once an User Based Package has been installed from the Application Catalog, it will be shown in the results of this method .. but initially it don't!!)
Method 2 - Install Device based Applications (This works)
Invoke-WmiMethod -Namespace root\ccm\clientsdk -Class CCM_Application -Name Install -ArgumentList 0,"xxAPP scope IDxx",$True,$False,1,1
Method 3 - Install User based Applications
Invoke-WmiMethod -Namespace root\ccm\clientsdk -Class CCM_Application -Name Install -ArgumentList 0,"xxAPP scope IDxx",$False,$False,1,1
(once an User Based Application has been installed from the Application Catalog, this method can be used .. but initially it can't!!)
Method 4 - Install User Based Packages (NOT WORKING)
This solution is based on an (scripted) installation from the Application Catalog. Information can be found on the following sites:
http://blogs.technet.com/b/configmgrteam/archive/2012/09/19/extending-the-application-catalog-in-system-center-2012-configuration-manager.aspx
http://allthingsconfigmgr.wordpress.com/2012/10/02/application-catalog-uncovered/#more-284
You can see the usable operations/methodes, by using the following URL in your SCCM 2012 environment:
http://YOURSITE/CMApplicationCatalog/ApplicationViewService.asmx
The method i tried for an installation part is 'installapplication', see example below:
$service.Installapplication($appid, $deviceid, $null)
This syntax is correct because it's giving a result that indicates the my command was correct(when i change the variables it produces an error), but that's it ... no application is installed.
For the record: the operations/methods 'RequestApplicationForUser and GetApplications' are working fine.
There is also log file 'ServicePortalWebService.log' on the Application Catalog Server in
C:\Program Files\SMS_CCM\CMApplicationCatalogSvc\Logs, where i can see that Installation call is (correctly) be done.
To be short:
Is there anybody who can tell me how to automate (with Powershell) an USER BASED PACKAGE installation?
With kind regards,
Hayo Veenstra

Thanks for your reaction.
What i want is creating shortcuts in the startmenu of a user, that initiates a SCCM software installation. We also use this method for our SCCM 2007 environment by initating advertisments. I do not want a required user deployments, because when that user
logs on on another machine (for a short time) .. all his/her software will be deployed. So i do not want to install unnescessary software .. only what a user initiates.
Do you have other suggestions?
I'm not sure about the shortcuts. But, as for required deployments to users installing on all machines they log onto: Not if you have User Device Affinity running for you. You can set a requirement in the application to only install on a user's
primary device. Another option that we often deploy is to use App-V to deploy a virtual version of that app if the device they logged onto is not their primary. When they log off, it goes away. This is all done using User Device Affinity.
This is new in 2012.

Reports don't show on SCCM 2012 SP1 Console

Hello everyone,
We are encountering a strange issue with the SCCM 2012 reporting services. I was creating a custom report earlier. At some point, and I don't know exactly how, I could not open the Reports hive on the 'Monitoring' wunderbar. No reports load in the console.
When I right-click "Reports" and choose "Create Report" it throws up an error "The request failed with HTTP status 401: Unauthorised".
When the above happens, what I see is that the report services service account keep getting locked out.
I can open both http://RerportingServicesServer/Reports ad well as http://RerportingServicesServer/ReportServer using the service account (when not locked) to see the reports but I can not launch 'Report Builder' option.
It's really strange. Looks as if the SCCM console is wrongly passing the stored service account while connecting to the reporting service.
The rest of the SCCM appears to be fine. The SQL services appear to be running fine (i.e. they are not stopped).
Any idea?

Hi all. Apologies for not getting back sooner. The issue hasn't gone away, instead I am using a workaround.
It appears to be a bug in the console to me. It looks like the problem is confined to my own account where as for other user accounts, the Reports do appear on the console on the same server.
As far as I remember (it was a while back;)) the problem originally occurred when I had opened the Report Builder (select report -> Right-click edit) it prompted me for logon credentials where I entered the report service service account which
has permissions to create/edit reports (but I also selected "save windows credentials" at that time which I think is the problem). It is since then things appear to be going wrong for my account. Now when I access the Reports folder on the console, the reports
don't appear. When I right-click to create report, the above "The request failed with HTTP status 401: Unauthorised" error appears. And then I notice that the report services service
account (which I had entered initially several days ago before the error had first occurred) gets locked out. It looks like the Admin console is trying to pass the corrupt(?) Report service service account credentials to the Reports module and
that's where the problem lies. Though I could be wrong.

Reports not Generated after moving SCCM 2012 SP1 DB on SQL 2012 SP1 cluster

Hi all,
i have moved my SCCM 2012 SP1 DB on SQL 2012 SP1 Failover Cluster,this cluster is a two node cluster.the DB was moved fine and the DB configuration in SCCM Site maintenance was also done successfully.After the migration process,SCCM was working fine created
few collections & packages, then checked the DB on cluster & they were updated successfully.
but when i tried to install report server on my SCCM machine,again there was no instance displayed after entering the cluster name.
I searched this & come across this post :-
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/4479e73e-8a19-4c7e-9418-b36770656b9b/
which says to install report server on the cluster node machine which is currently running the Reporting Service.I tried to install the report server & the instance was detected this time.it was installed successfully.
But when i tried to generate reports I got this error :-
Permissions are fine as i have added SCCMadmin & sccm machine in the local admin of both the nodes.
Please Help.
Thanks,
Pranay.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
If you look at your second screenshot the Remote errors is not enabled. Use this blog to enable them.
http://www.enhansoft.com/blog/enabling-remote-errors-in-sql
If changing the data source on the report fixed it for a single report. It means that your shared Datasource is having problems. Reset the username and password within CM12 console and this should fix it for every report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Create Report based on Query in SCCM 2012

Similar Messages

Maybe you are looking for