Create test sequence from lab view - add it to the .seq file

Hello All,
I have a query. consider an test sequence that has already stored in "Test.seq" format. let us say we have 5 test steps.
now is it possible to add a new test step to this existing test sequence using Lab VIEW. I mean if we enter a new test step this has to reflect in the existing test sequence "Test.seq". i.e in the "Test.seq" we must have 6 test steps.
If this is possible let me know how this can be done.

Michels,
Guenter mande a very good point. Make sure to take a look at the forum thread he linked to see the licensing implications of creating your own Sequences.
There is a very good forum thread that discusses how to create steps programmatically. You can find the forum here:
http://forums.ni.com/ni/board/message?board.id=330&message.id=7785&requireLogin=False
Regards,
Santiago D

Similar Messages

Unable to see video & audio tracks as shown in "Create a sequence or timeline and add audio"

hi,
I'm on the https://helpx.adobe.com/creative-cloud/learn/start/premiere.html page trying to work through the Create a sequence or timeline and add audio tutorial
And cannot see the Video & Audio, as shown in the bottom right sub-window
I'm using a trial version of Premier pro CC downloaded yesterday. On my mac mini running 10.9.2
does anyone know how to fix this problem?
thanks
david
I am able to hear the audio.
Message was edited by: spottedsilvertabby

Hi,
Error 7 is when a router or the connection to the router is broken in some way.
Some devices have features such as Denial Of Service protection (DoS) that cut a particular Internet Port when it thinks too much data is coming (Presuming it is an attack.)
iChat 5 in Leopard is not capped by the System Preferences > Quicktime Streaming speed (which we used to suggest was set at 1.5Mbps)
It now sees your whole Connection speed and your Upload may be much faster than this.
Your Download is likely to be much faster. However iChat will tend to operate at the lower figure of your Upload.
DoS features are threshold based.
You may now be bumping in to this Threshold where you were not before.
SPI (Stateful packet Inspection) does a different job but has the same effect when it is overloaded by the speed of the data.
If you have either of these features, turn them Off (Disable them)
7:25 PM Friday; October 2, 2009

Is it possible to select multiple clips and create a sequence from each individually?

Is it possible to select multiple clips and create a sequence from each individually? If you select multiple clips and select "New Sequence from Clip" it puts all of the clips into one sequence. Is there an easy way to quickly perform this on multiple selected clips separately?

So now I *have* used Butler with PPro, and it works very well, here's an idea of how to do it:
Import folder of clips
Ensure first clip selected in bin and sorted by Media Type
Most of these commands need shortcuts assigning - mine listed below
Macro:
To create seq from selected clip:
‘New seq from clip’ (Shift+CMD+N)
To duplicate this seq:
‘Reveal Sequence in project’ (Shift+F) - not strictly necessary as it will already be selected
‘Window | Project’ (CMD+9)
‘Edit | Duplicate’ (Shift+CMD+/)
To rename the duplicate
‘Enter’
Various keystrokes to rename as required
‘Enter’ - to make name stick
‘Shift+Enter’ - to reselect that sequence
‘Esc’ - to get out of editing name
To change resolution of duplicate:
‘Sequence Settings’ (CMD+5)
‘Tab’ x 3 (to get to H Frame Size)
‘xxxx’ (to enter frame width)
‘Tab’ x 1 (to get to V Frame Size)
‘yyyy’ (to enter frame height
‘Enter’ x 2 as prompt will say previews will have to be deleted
To then find next clip ready for macro to run again:
‘Open in Timeline’ (Shift+CMD+O)
‘Match Frame’ (Shift+Spacebar)
‘Reveal in Project’ (Shift+CMD+F)
‘Window | Project’ (CMD+9)
‘Down Arrow’ - to select next clip
I tried it with Butler (manytricks.com - free trial, $20 to buy) and it worked a treat, takes about 3 secs per clip
AHK (for windows) is at autohotkeys.com and is free.
You could start making multiple macros - that would enable you to do grade / resize in middle of duplication - and then export etc, but I figure you can figure that out ;-)

How to Create Test Sequence Document in HTML using command line

How to Create Test Sequence Document in HTML using command line
I have lot of sequences and I want to create Test Sequence Documentation in HTML format using Command Line automatically, is there a way to automate this task using .bat file or using C# .Net

If you aren't able to figure out how to call a C++ DLL in .net then there may be another option. Unfortunately I don't know how to do this off the top of my head and I don't have an example.
The other option would be to change docgen.seq a little bit to the dialog doesn't display and you just hardcode the options. Then you can use a command line to call testexec.exe: http://zone.ni.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Create test database from standby without some data

Hi. I want to create test database from my standby database using rman.
But i have some some tables and where information is too large i dont want backup all data from this tables. because i dont have enough space on my test server.
Have u any idea for solution this problem.
Thanks

But have suggestion.
You can create duplicate database on based your target database (to new host) and skip undesired tablespaces...
bash# rman target /
RMAN> ....
your code should be like :
run {
allocate auxiliary channel 'dev_0' type 'sbt_tape'
parms 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=my,OB2BARLIST=MY DAILY)';
allocate auxiliary channel 'dev_1' type 'sbt_tape'
parms 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=my,OB2BARLIST=MY DAILY)';
allocate auxiliary channel 'dev_2' type 'sbt_tape'
parms 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=my,OB2BARLIST=MY DAILY)';
allocate auxiliary channel 'dev_3' type 'sbt_tape'
parms 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=my,OB2BARLIST=MY DAILY)';
SET UNTIL SCN 7769764681915;
DUPLICATE TARGET DATABASE TO MYTS SKIP TABLESPACE TOOLS_IDX,TOOLS,ARCHIVE,IDX;
Edited by: Ulfet Tanriverdiyev on Dec 21, 2010 3:42 AM

Switching from one View to another in the Portal

Hi Experts,
We have created many global views from one query. We have created these in thr portal.
Our problem is when we switch from one view to another, it will carry all the filter values from the previous view. Ideally we only want to pass the values from the variable entry, not the filter values local to the view.
Does anyone of you knows how to solve this problem? I am trying to look at the Customer exit... and do something with the mapping. But this one will affect all the drill-downs. Any thoughts?
Best Regards,
Rose

Hi,
I have somehow solved it using the exit. In this case the source and target query is really the same because we are just switching from one view to another using the the same query. What I did in the exit was:
- If the source and target query are the same.
- remove all the mappings except the ones with object types "Variables".
This ensures that:
1) I only apply this logic if the source and destination query is the same.
2) The restrictions that will be applied to the destination view when I switch
from one view to another will always be only be the paramater values
(default or entered by the user) when they first run the query.
Best Regards,
Rose

I am using using IDVD to create slide shows. When viewed on my computer the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.

The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

Why is adobe requiring me to make a purchase in order for me to create a pdf from word? I paid for the service in April which included unlimited conversions for a year

why is adobe requiring me to make a purchase in order for me to create a pdf from word? I paid for the service in April which included unlimited conversions for a year

Make sure you're actually logged-in to your account.

How can i add new files to my ipod from a different computer without losing the added files on my ipod?

how can i add new files to my ipod touch from a diferent computer without losing the added files already on my ipod?

Email them? Use DropBox? What type of files?

Can't create a new illustration. Problems occurred while saving the print file.

I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file. ID:-1
I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another.
I have rebooted with no avail.
System:
Adobe Creative Cloud CC
Mac Book Pro 2012
2.6 GHz Intel Core i7
8 GB 1600 MHz DDR3

Is a printer connected? Is it turned ON? Is the driver up to date?
Illustrator checks this every time and also writes information on the printer into the file.

I want to add hyperlink in the illustrator file and want the output in the PDF

I want to add hyperlinks in the illustrator file and want the output in the PDF.
I tried to add the multiple hyperlinks on the text and images in the illustrator by using the attribute panel but the links are not working in the published PDF.
Is there is any other method to create a hyperlink in the illustrator?
Can anybody help me out in this
Thanks

Interesting, Carlos.
There's another method by JET: Re: hyperlinks in Ai

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing".

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing". Original file is written on iMac (2014) and saved to an USB stick and then transferred till macBook Pro (2009, Yosemite) for editing. Then I shared the files by iCloud but I am not able to open them on iMac again. Niether can I use the USB stick to transfer the edited files back. I'm running Pages '09 4,1 (923) on the macBook and Pges 5.5.2 (2120) on the iMac.
Håkan

Pages 5.5.2 is extremely incompatible with even other Macs let alone the vast majority of PC and MsWord users out there, so not a good idea to leap into the fire with both eyes shut.
After having done that to the first Pages 5 files, Apple has repeatedly done it to even the most minor point updates. Apple can't even anticipate its own erratic changes let alone what everyone else needs doing.
Peter

I am trying to install Illustrator C6 on new system (Win8.1), Already de-activated from old system. I downloaded the 3 files. First file opened and had fonts, but second file (1.8Gb) does not open; does not appear to have an exe file. How do i install?

I am trying to install Illustrator C6 on new system (Win8.1), Already de-activated from old system. I downloaded the 3 files. First file opened and had fonts, but second file (1.8Gb) does not open; does not appear to have an exe file. How do i install?

what files (names and extensions) did you download?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

That depends on why it won't open. Most of the time it means the file is corrupted and unlikely to be recovered. If you saved it right after adding or copying a LOT of layers - then it might just be the layer limit and we can attempt to recover it.

Create test env from production system

Hi,
Please sorry,
I am new in this area of Oracle Applications 11.5.10 and I need help in couple of questions.
We have production system with Oracle Applications 11.5.10, APPS tier on 32bit Red Hat Linux EE 4 server, and 10.2.0.3 DB tier on 64bit Red Hat Linux EE 4 server.
We get the 2 new servers for test Oracle Applications 11.5.10 environment with same versions of OS like production.
First test 32bit for APPS,
Second test 64bit for DB tier.
Now we need to create test environment, same like production.
Questions>
1) What is the best way to create same env in this situation (32bit app tier, 64bit database tier). I suppose that cloning using rapid clone procedure isn't possible on this clear machines.
2) If I need to install Oracle Applications 11.5.10 software first on both machines, is it possible to use 32bit rapidwiz installer (existing in stage) to create test db tier on this 64bit node, or not.
I have read in the document Oracle Applications 11.5.10 - Installation Update Notes for Linux x86
You can only install Oracle Applications on an x86-64 architecture server if the operating system is 32-bit Linux or Windows. If your operating system is 64-bit, contact your operating system vendor to obtain a 32-bit operating system before installing Oracle Applications.
3) How to now from which stage production is created. When I try to create the stage for my test environment using perl command perl /mnt/cdrom/Disk1/rapidwiz/adautostg.pl
I get these options:
1 - to choose Oracle Applications
2 - to choose Oracle Applications with NLS
3 - to choose Oracle Database technology stack (RDBMS)
4 - to choose Oracle Applications database (Databases)
5 - to choose Oracle Applications technology stack (Tools)
6 - to choose APPL_TOP
7 - to choose National Language Support (NLS) Languages
Because I haven't seen directory oraNLS is this 1 good choose for stage.
Thanks, and sorry because I am new in this area.
Regards
Edited by: user12009428 on Sep 30, 2010 12:12 PM

Hi,
1) What is the best way to create same env in this situation (32bit app tier, 64bit database tier). I suppose that cloning using rapid clone procedure isn't possible on this clear machines. Use Rapid Clone.
Rapid Clone Documentation Resources, Release 11i and 12 [ID 799735.1]
FAQ: Cloning Oracle Applications Release 11i [ID 216664.1]
2) If I need to install Oracle Applications 11.5.10 software first on both machines, is it possible to use 32bit rapidwiz installer (existing in stage) to create test db tier on this 64bit node, or not.Type "linux32 bash" -- See this thread for details.
How to install 11i on Red Hat Linux 64 bit
Re: How to install 11i on Red Hat Linux 64 bit
You can only install Oracle Applications on an x86-64 architecture server if the operating system is 32-bit Linux or Windows. If your operating system is 64-bit, contact your operating system vendor to obtain a 32-bit operating system before installing Oracle Applications. What is the database version?
To migrate the database from 32-bit to 64-bit you need to follow the steps in these docs (depends on your version).
Using Oracle Applications with a Split Configuration Database Tier on Oracle 9i Release 2 [ID 304489.1]
Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2 [ID 369693.1]
Using Oracle EBS with a Split Configuration Database Tier on 11gR2 [ID 946413.1]
3) How to now from which stage production is created. When I try to create the stage for my test environment using perl command perl /mnt/cdrom/Disk1/rapidwiz/adautostg.pl
I get these options:
1 - to choose Oracle Applications
2 - to choose Oracle Applications with NLS
3 - to choose Oracle Database technology stack (RDBMS)
4 - to choose Oracle Applications database (Databases)
5 - to choose Oracle Applications technology stack (Tools)
6 - to choose APPL_TOP
7 - to choose National Language Support (NLS) Languages
Because I haven't seen directory oraNLS is this 1 good choose for stage.oraNLS is only required when you want to install additional languages in addition the base English one. If you have no installed languages you can skip this one.
Please run md5sum as per (MD5 Checksums for 11i10.2 Rapid Install Media [ID 316843.1]) to verify the integrity of the stage area directory before you run Rapid Install.
Thanks,
Hussein

Create test sequence from lab view - add it to the .seq file

Similar Messages

Maybe you are looking for