Unable to see video & audio tracks as shown in "Create a sequence or timeline and add audio"

hi,
I'm on the https://helpx.adobe.com/creative-cloud/learn/start/premiere.html page trying to work through the Create a sequence or timeline and add audio tutorial
And cannot see the Video & Audio, as shown in the bottom right sub-window
I'm using a trial version of Premier pro CC downloaded yesterday. On my mac mini running 10.9.2
does anyone know how to fix this problem?
thanks
david
I am able to hear the audio.
Message was edited by: spottedsilvertabby

Hi,
Error 7 is when a router or the connection to the router is broken in some way.
Some devices have features such as Denial Of Service protection (DoS) that cut a particular Internet Port when it thinks too much data is coming (Presuming it is an attack.)
iChat 5 in Leopard is not capped by the System Preferences > Quicktime Streaming speed (which we used to suggest was set at 1.5Mbps)
It now sees your whole Connection speed and your Upload may be much faster than this.
Your Download is likely to be much faster. However iChat will tend to operate at the lower figure of your Upload.
DoS features are threshold based.
You may now be bumping in to this Threshold where you were not before.
SPI (Stateful packet Inspection) does a different job but has the same effect when it is overloaded by the speed of the data.
If you have either of these features, turn them Off (Disable them)
7:25 PM Friday; October 2, 2009

Similar Messages

I am unable to see videos on amazon prime because it says I need to upgrade th Flash player ...which

I am unable to see videos on amazon prime because it says I need to upgrade the Flash player ...which I have done many times, still is not working. I have MAC os x 10.5.8*
Can you help me?

What version of Flash Player do you have installed?
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

Flash 11.7.700.202 - reports of unable to see video

We run a social video site and have had many reports of users unable to see video in the last few days. Our code has not changed and we believe this is due to the 11.7.700.202 release as these problems were not previously reported.
Symptoms:
User is subscribing via rtmfp to a live stream on an Adobe FMS. When this happens, we don't know if they fail to connect or the connect succeeds and they don't see video. We use an inhouse flash app. The feed is available on the FMS since other users are successfully subscribing to the same feed.
This happens to a small percent of users but that leads to many reports across our user base.
Refreshing the page, which reinstantiates the flash app, removes the problem.
Is anyone else seeing problems with viewing video from the newly updated flash player?
Thank you,
Robert

We found the problem and it is on our side, not a problem with the flash upgrade. I'll write what happened here in case it can help anyone else.
On Sunday night, two days after this post, one of our FMSs stopped accepting RTMFP publishes. When we examined the box we found that it was reporting that it had reached its max licensed RTMFP connections. We know there weren't that number of connections on there and suspect that connections leaked. After restarting the box, the FMS resumed accepting RTMFP publishes. This failure has never happened to us before so we're treating it as a one-off and not investigating.
Since the restart of that FMS, reports of subscribe failures have disappeared. That's great and we're presuming the restart fixed the subscribe failures. The strange thing is that users were reporting subscribe failures several days before we observed any publish failures. That said, we know this FMS was in a strange state so we concluded our investigation.
Thanks to Chris for the quick response on this.
Robert

I want to start with audio on a timeline and add photos. Why is this not possible in the new confusing version of iMovie?

I want to start with audio on a timeline and add photos. Why is this not possible in the new confusing version of iMovie?
Yrs,
Unspeakably Frustrated

Yes, you can do this. Drag the music track to the background and start adding your pictures. A great way to do this is to use beat markers so your photos will change on the beat.
A really fast way to do this is to line up your photos in an iPhoto album in the order you want them. You can drag the whole album into iMovie at once.
Here is a tutorial on the beat marker feature.
Here is a sample of a slideshow made by dragging in the music first, adding beat markers, and then adding photos.

GForce4 MX420-T - Unable to see video on external TV/Monitor/VCR

I am unable to get any watchabe video out via the RCA or S-Video cable from my video card. I do get some garbled rubbish on the screen but it's just the odd bunch of diagonal white lines on a black screen.
I have tried this cable on other devices (Other than the Y adaptor that came with the card) and in the inputs of the divices that i want to watch the PC on and it works.
I have attempted to find a setting in the video card setup/config that allows me to specify the output to S-Video/RCA or PAL/NTSC but I am unable to find any setting like this.
Thanks in advance

Quote from: Rassilon on 12-August-05, 18:20:53
I LOVE your Firefox, do you mind if I grab a copy of it?
Go for it, I borrowed it from someone else in the forum. Then I found a bigger picture online. So far I have not found the original person who created it.
With the NVidia drivers, it should work. All you need to do is go into the graphic properties and have it output video to the correct device/cable. You should be able to have it clone the desktop or a second desktop. If it still doesn't work you will probably need to RMA the card.
What is the Y-adapter you mentioned in your first post?
Good Luck
Jeremy
After a bit of googling I extracted this from NVidias site.
1) Right-click on the Desktop and select Properties
2) Left-click on the tab labeled Settings. Then left-click on the Advanced button.
3) This will bring up the Advanced Properties. Left-click on the tab corresponding to the graphcs card that is installed in your PC. For example, if you have a GeforceFX 5800 Ultra graphics card, you will click on the tab labeled "GeforceFX 5800 Ultra". A window will pop up to the left of this panel. From this left side window, select nView Display Mode.
4) You should then see a panel similar to the one above. If you are using a single display video card, left-click the "Current Display" drop down menu and choose "TV". Then click on the "Apply button to confirm the change.
5) If you are using a dual display video card, left-click over the "nView Modes" drop down menu and then select "Clone Mode". Then left-click over the "Display Pair" drop down menu and choose your monitor configuration (i.e. if you are using an analog CRT monitor plus TV, select "Analog Display + TV"). Then select the "Apply button.
6) You should now see the display on your TV. A confirmation window will pop up prompting you to confirm the changes made. Select Yes to keep these settings. Otherwise, the display will revert back to your previous settings.
Hope This Helps

If I accept cookies, I am unable to see videos in YouTube

Yesterday I upgraded Firefox from version 3.6.13 to version 3.6.14 on two different machines (both of which use Windows XP). And then a very strange thing happened: after that I am unable to see YouTube videos. I can see hear the sound but there is no image (there is a white space instead). Furthermore, this only happens when I am a regular user, not an administrator. And it happens only with YouTube. The only way I found to fix the problem was to delete all YouTube cookies and to block any new ones. Then all works fine.

If you've an answer that works, that's fine. Problem may occur for various reasons, including flash problems and video drivers requiring updating.
As a temporary workaround hovering your cursor over the place where the pop-out button should be below the YouTube video screen, then left click there and the video will then display in the pop-out screen.

Unable to See Videos files In Blackberry 8830

Hello Everyone
I am trying to upload videos into Blackberry using the Blackberry Desktop Manager software from videos
Section of Media Option.
While i sync the video after setting the Check Option , it is taking considerable time to convert? and upload the videos.
But as soon as i disconnect and see videos in the blackberry , There is not a single video listed there
though it is clearly visible whenever i connect the memory card alone Or BB to Desktop Manager
Not sure what is happening , Please help me
Thanks
Amit

Hi axsuri,
Are you able to see other media files on the BlackBerry that are stored on your media card? Can you access these videos on the BlackBerry by opening the Media folder, clicking the Menu key and choosing Explore?
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Audio tracks missing when doing automate to sequence.

Using PMW200 with 4 audio tracks. When dragging single file to timeline I get the 4 audio tracks. But when I do an automate to sequence, I only get 1 audio track, plus, the default audio transition is not going on.
I have all the tracks highlighted and have ticked apply audio and video transitions.
Any idea where I'm going wrong? Thanks
Mike Ward

Hi Kevin. I uploaded a clip onto you tube for you to try, but you tube mixed the audio tracks so it was useless.
Basically, drag any video clip with 4 audio tracks recorded from camera onto timeline in cs6, and all audio tracks appear on the timeline. But automate several similar tracks to timeline and only one audio track gets added. The other 3 do not appear. Is there a work around for this, rather than dragging all on one at a time.
Thanks

Audio tracks added to movie in both iMovie for iMac and iPhone become reversed upon export - Bug?

Ive created a simple video in iMovie on my iPhone and on my iMac where I mute the audio from the original video clip and add a standard stereo MP3 audio file from my music library (which plays correctly durring the editting process of the video in iMovie)....
Once the video is exported however the audio channels are strangely reversed. Any idea why this may be occuring? The only workaround Ive discovered to counter this problem is by "Exporting Using Quicktime" in iMovie on my iMac....this is obviously a pain, and there is also no workaround such as this on the iOS version for the iPhone....
Any Opinions, Suggestions???

Hi Steve,
This is a long shot, but you could try copying and pasting all of your slides into a new instance of Captivate. If you have specified certain audio settings Captivate should pick these up when you export. If not then it is possible that your CP file has become corrupted.
If that doesn't work, please file a bug report using the web address I have included below.
Adobe Captivate Feature Request/Bug Report Form
It would be interesting to see if the CP team can shed any light on why this is happening.
Best - Mark
Visit the macrofireball blog

Dead audio tracks generated after subclip created

I've had some issues relating to audio tracks in Premiere Pro CC. I'm currently editing a collection of shorts, shot on Red Epic at 5k, with a stereo guide track recorded to camera. After syncing the audio (4 channels), I removed the guide tracks then subclipped the vision and audio by selecting both, grouping them and then dragging them into a bin in the project window. Here's where it gets tricky.
When I place the new subclips on the timeline they suddenly have around 16 tracks of audio. So one track of sound, followed by 3-4 dead tracks with no sound, then 1 track of audio followed again by another 3-4 tracks of dead air (and so forth). At first I just saw this as a minor nuisance and continued to edit. Once finished I exported OMFs for the sound mixer who brought it into protools. What was a 16 track timeline in premiere has now become a 64 track project in pro tools. It seems again, each actual track of audio has had around 4 dead tracks added to it. Sure the math may be a little off but you get the gist. The issue is on Premiere's end as I've tried a couple of times now to resync the audio, create a subclip but every time it seems to generate a whole bunch of dead audio channels. Really can't figure this one out. Please help.
Working on a brand new iMac, OSX 10.8.4, 3.4GHz Intel Core i7, 16 GB DDR3, GTX 680MX

This exact same thing is happening to me. This "feature" is exponentially duplicating empty tracks. Clearly this is a bug in the code designed to break merged stereo tracks out into individual mono tracks. These are not empty stereo tracks. They are recorded as mono tracks with audio in them but being "split" into multiple tracks, one with audio and the rest are blank. The problem is that Premiere is treating ALL tracks as stereo and creating a number of new, empty tracks for EACH track equal to the total number of tracks when you use the Merge Clip feature.
i.e. If I have 3 tracks of audio that I merge into a clip, it creates 3 tracks for each of those three tracks, resulting in 9 total tracks (3 with audio and 6 empty ones). 4 tracks in a merged clip creates 16 tracks, 5 tracks creates 25, etc.
I have tested this with stereo and mono tracks in a merged clip and the results are the same. I got interesting results when I merged stereo and mono tracks into the same clip. I had a single stereo track and 5 mono tracks. "Merge clip" turned this into 27 tracks. 5x5 mono tracks plus the original stereo track that was split into 2 mono tracks, making 27.
HOWEVER
This phenomenon has not occurred on every single clip in the film I am currently working on; rather, it has only occurred on most of them.
Specifically, this only seems to be occurring when merging clips including multi-track .wav files. There were a few scenes where the sound guy only recorded the two actors with lavs onto a single stereo track, with the actors split between the L and R channel. When the stereo track is merged it correctly makes two mono tracks out of the L and R channels. But every single clip I have come across since then where he also added the boom mike or a channel for a third actor, I get exponential track city.
The conclusion I have come to is that Premiere is recognizing these multi-track .wav files as separate mono tracks when you drop them on the timeline, but the "Merge Clip" feature is mistakenly reading each track in a multi-track .wav files as a "single multi-channel track" that needs to be broken up. I say "single multi-channel-track" because there isn't a word for it that I am aware of. A single track with two channels is called "stereo" but it is like Premiere is reading the four mono tracks as a single track with four channels, but then making it worse by thinking EACH track has a number of channels equal to the number of "channels" it thinks are in the track.
So again, it reads each track in a four track clip as a single track with four channels, then breaks each "channel" into four separate tracks, thus creating the exponential increase in the number of empty tracks. (3 tracks become 9, 4 becomes 16, 5 becomes 25, etc).
Going into "Modify -> Audio Channels" is a lame workaround because I shouldn't have to painstakingly go through every clip in a movie just to manually turn off tracks that shouldn't exist. Presets, as suggested, are only somewhat useful because the positions of the real audio isn't always placed on the same tracks. Their location is also dependent on the number of tracks being created. When four tracks are merged, the audio is located on tracks 1,6,11, 16 while the audio for 5 merged tracks is on 1, 7, 13, 19, & 25, with 6 tracks it is placed on 1, 8, 15, 22, 29, & 36. So the only way for me to know which tracks to suppress on any given clip is for me to open up the clip and visually determine how many actual tracks there are and which ones to delete. This is crazy. To go back and fix this after I've synced everything will probably take me days of work. If I had known about this before I synced everything it wouldn't have been as hard to determine how many tracks each clip had as I synced it. But I shouldn't have had to in the first place. This shouldn't be happening.
This is not a feature, it is a bug. Period.
Clearly, this could not have been intentionally designed, but it is a serious and crippling error in the way the program is interpreting the tracks with the code that was intended to just break out stereo channels into mono. Perhaps it is a miscue between the way the recording device encodes the multi-track .wav file and the way Premiere reads it. I don't know. I do know that the audio I am working with was recorded on two separate professional recording devices by two different pro sound guys in Hollywood so this isn't some amateur mistake. It is easily doubling the amount of work I have to do with my footage/audio before I can start to work with it.
Somebody needs to take another look at that code and fix this as soon as possible.
(Does this make any sense or do I need to clean this up for clarification?)
Damon Mosier

Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...

Import a ppt and add audio

I am trying to record/add audio to a project that I created from a powerpoint. How is this done? The ppt comes into Captivate as one slide so I am not able to coordinate my words with each click that moves to the next screen. So far my work around is to create a new captivate project, screen by screen, and copy in a screen shot from the ppt. captivate project. There must be an easier way?
Thanks.

what versions of PPT and Captivate are you using?
what options are you selecting when importing?

Unable to 'see' videos

I have Windows 8 with the updated Flash Player. Whenever I click on a video clip I can see any commercials in advance of the video and I get the audio portion of the actual video clip, but I get a green screen during the video itself. Any suggestions? Thank you.

Green screen is most always caused by outdated or corrupted video drivers. Check them and update if necessary.

Unable to see videos or music that ive loaded

I've put some music and videos onto the ipad but when i got to view them on the device it shows the library as empty, i plug the ipad back onto the pc and it shows in itunes that the items are on the device, can someone please help....????
I also had the same problem with my iphone 3g.....!!!!
Am I doing something totally stupid...???

My guess is that that the file format of the videos are not supported by the iPad or iPhone. How were the videos created and what is the format. By format I mean the general format such as mp4 as well as frame rate, audio format etc. How to those parameters compare with the iPad supported video format listed Apple's technical specification page for the Ipad.

Unable to see videos copied into sd card

Yesterday I had copied videos from my laptop to my Lumia 1320 sd card and was able to see it. However today I observed message that sd card may be having some problem,connect it to pc to fix the problem.
Later on when I tried to watch videos from sd card, I noticed that those videos were not there.
I dont know what went wrong & I lost my videos.
Can somebody help me to tesolve this issue?

Hi, saiprasad3776. What's the exact error message? Can you still view your files when you connect your SD card to your computer? You can also try to use another SD card onto your Lumia 1320 to further isolate the issue. Let us know the outcome.

Unable to see video & audio tracks as shown in "Create a sequence or timeline and add audio"

Similar Messages

Maybe you are looking for