Create Time Table in Source Database fails

Is there an complete moron guide to creating a time dimension table in the data source? I have no idea why it is not working.
In the data source I'm using windows authentication and my user is member of the db_owner role in the data source data base.
- Created a multidimensional project connected to a SSAS instance running on my local computer.
- Added a data source to a sql server 2008 R2 instance on a server in the same domain.
- Created a time dimension
- Clicked to create a data source view
- Chose a random data source view name
- Next next
"Create failed for the Table 'domain\username.Time'."
Nothing else, no reason why, just that it failed.

Hi Molotch,
In your scenario, you create a time dimension in an Analysis Services project which process fail, right? It's hard to give you the root reason since do not know the creation steps and detail error message.
However, there is a more user-friendly way to create your time dimension is to use the built-in wizard in BIDS. Using the time dimension wizard is a pretty straight-forward process. Here is a blog that demonstrate how to create a time dimension using built-in
wizard. For the detail information about it, please refer to the link below to see the using the Time Dimension Wizard section.
http://blog.tangotechnologygroup.com/2011/01/19/creating-a-time-dimension/
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Similar Messages

Failed to Create RBS tables in Content DataBase when installed RBS

I'd config RBS for SQL server 2008 R2. But it failed to create rbs tables in content database after I'd run "msiexec /qn /lvx* rbs_install_log.txt /i RBS-x64.msi TRUSTSERVERCERTIFICATE=true FILEGROUP=PRIMARY DBNAME="WSS_Content"
DBINSTANCE="DBInstanceName" FILESTREAMFILEGROUP=RBSFilestreamProvider FILESTREAMSTORENAME=FilestreamProvider_1 " with powershell. And the install log file had the
erro log"Executing op: ActionStart(Name=FixFilestreamStoreConfig,,)
Información 2769. El instalador ha encontrado un error inesperado.The
error code is 2769. Custom Action CreateFilesNoUI did not close 21 MSIHANDLEs." I'd found some imformation on this website and was told to enable "name pipes". But it doesn't work for me.
Is anyone can help solve this problem? Many thanks!

Finally，I found the solution.
First make sure you have enable "Name Pipes" , and your sql "RemoteDacEnable" is "TRUE" , then what's the point that when you run command in powershell with"msiexec /qn /lvx* rbs_install_log.txt /i RBS-x64.msi
TRUSTSERVERCERTIFICATE=true FILEGROUP=PRIMARY DBNAME="WSS_Content" DBINSTANCE="DBInstanceName" FILESTREAMFILEGROUP=RBSFilestreamProvider FILESTREAMSTORENAME=FilestreamProvider_1" , if
your DBINSTANCE is the defult one , then change the name whit "localhost" and not "MSSQLSERVER".
More importantly, if you had something changed , you must uninstall the RBS first then reinstall it .
I'd read a blog that if your rbs_install_log.txt is smaller than 1M ,there must be something wrong to your installation even though it has logged that your RBS has installed successfully.
Hope this help. Thanks!

Insert data into fact table from source database tables

here i try to insert data into fact table from source database tables here is the query
ALTER procedure [dbo].[facttable]
as
insert into [pp dw].dbo.Dimfact(Prod_ID,Production_ID,Material_ID,Equip_ID,WC_ID,Recipe_ID,Quantity,costprice)
select Products.[Product ID],[Production ID],Materials.[Material ID],[Equipment ID],[Work Centre ID],[Recipy ID],Quantity,[cost price]
from
[PRODUCTION PLANNING 2].dbo.[Products],
[PRODUCTION PLANNING 2].dbo.[Production Detail],
[PRODUCTION PLANNING 2].dbo.[Material category],
[PRODUCTION PLANNING 2].dbo.[Materials],
[PRODUCTION PLANNING 2].dbo.[Equipment],
[PRODUCTION PLANNING 2].dbo.[Working Centre] ,
[PRODUCTION PLANNING 2].dbo.[Recipies]
where
Products.[Product ID] in (13, 14, 15, 16, 17) and
[Production Detail].[Production ID] in (1, 2, 3) and
[Materials].[Material ID] in (1, 2, 3, 4, 5) and
[Equipment].[Equipment ID] in (1, 2, 3, 4) and
[Working Centre].[Work Centre ID] in (1, 2, 3) and
[Recipies].[Recipy ID] in (1, 2, 3) and
[Material category].[Category ID] in (8, 9, 10, 11, 12, 13)
and when i execute query it shows me error
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dimfact_Dimproduct". The conflict occurred in database "pp dw", table "dbo.Dimproduct", column 'Prod_ID'.
ERD IS
HOW TO SOLVE THIS PROBLEM?

I cant see any join conditions in your query posted. Whats the purpose of the query above. It will just bring you a cartesian product (cross join) of tables involved subjected to filters. Are you sure this is the correct query?
The error you're getting may be because you've not yet populated DimProduct or may be because of logic you used in popultaing DimProduct causing it to miss some records which is what query is referring to in above case.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Is there a way to create "temporary" tables in SAP database?

Hello,
Is there a way to create temporary tables in ABAP?
Here is our scenario:
1. Invoke a custom RFC that creates a temporary table and returns the name of the table.
2. Invoke another custom RFC and pass this table name as parameter. This RFC internally does some INNER JOIN with the temporary table.
3. Invoke the third RFC to delete the temporary table.
Note that the name of the table cannot be static. We have many users using our application simultaneously and connecting to the SAP server.
I would appreciate it if you could point me in the right direction.
Thank you in advance for your help.
Peter

I just ran into a similar issue. While only calling the select statement 2 times, each time had so many entries in the 'for all entries' list, that the compiler converted this into about 700 calls to the select. Now since the select joined three real tables on the database, the trace shows this one select as being the slowest item in this application.
I think that happened because 'for all entries' gets converted to an 'IN' clause, and then the total number of characters in any SQL statement has an upper limit. So the compiler must make the select statement over and over until it covers all entries in the 'for all entries' list. Is that correct?
Since every database I ever saw has the concept of db temporary tables, I have used db temp tables many times for this sort of thing.
The ABAP compiler could determine that more than one IN statement will be need, then use an alternate: write all the FOR ALL ENTRIES to a db temp table, then join on the db temp table, then drop db temp table. Since the compiler does this sort of thing, no application code needs change to get the speed boost.

Creating New table in a database

hey just wondering what i would have to do to create a new table in a database??
please show me some love

Please see my reply in your other thread
http://forum.java.sun.com/thread.jspa?threadID=792913&tstart=0
You really don't want to do this.

Is it possible to create nested tables in MySql database?

I am currently working on a project with my team and I'm in charge of designing the database. It's going to be a service delivery app that's going to have the name of several clients and their respective list services and cost of each service. The problem I'm having right now is finding a way to create separate tables, menus if you will, of their list of services offered since they all have different prices.
Here's my question, can I create individual tables within a larger table (nested tables) using MySQL or would you recommend a different method?
Please bear in min this is my first SQL project and I've had no prior experience with it.
This topic first appeared in the Spiceworks Community

It seems that the ability to link to a KB article within the WYSIWYG is broken.
Spiceworks 7.4.00070
IE 11 and Mozilla 38.0.5
Can anyone else confirm?-Open the User Portal, edit any page and click the "Knowledge Base Article Link" button. -Chose a KB article and then publish your change.
-Hover over the newly created KB link and/or click on the link.*screenshots are what I get.

Creating cache tables in the database

I was told there are 2 ways to create the cache tables/triggers/etc. in a database.
1. Modify the ld_cache.sql file shipped with ALDSP 2.5 to use our names for the cache objects and manually run the SQL against the database.
2. In the ALDSP console, click the "Enable cache" checkbox and add the table name for a data service which uses the cache.
I've done this successfully with method #1. I just got an error with method #2.
Is method #2 a correct way to create the cache objects (for the first time) in a database?
Thanks,
Michael

This is running in production mode on ALDSP 2.5, WLS 8.1.6, Sun JDK 1.4.2_11.
Error is
com.bea.ld.CacheException: Cache is not active
     at com.bea.ld.server.cache.DBCache.checkStatus(DBCache.java:671)
     at com.bea.ld.server.cache.DBCache.getTotalFunctionCacheCount(DBCache.java:631)
     at com.bea.ld.ServerBean.getTotalFunctionCacheCount(ServerBean.java:655)
     at com.bea.ld.Server_ydm4ie_EOImpl.getTotalFunctionCacheCount(Server_ydm4ie_EOImpl.java:262)
     at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:491)
     at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:120)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:434)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:429)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)

Getting error while creating table from one database to other.

Hi,
We are getting below error while creating the table from one database to other.
SQL> create table fnd_lobs parallel compress as select * from [email protected];
create table fnd_lobs parallel compress as select * from [email protected]
ERROR at line 1:
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
Regards,
Bhatia

hi
what are the apps version local and remote database???
Snapshot too old errors occur because Oracle can 't reconstruct a consistent
image of a block for the purposes of a consistent read.
I feel at remote database, you are using UNDO, it will be rather easy to iincrease the undo retention time or increase the undo tablespace size.. if you are dealing with roll back segments, you may have rollback segments whose optimal values are too small...
increase roll back segments size and select again then
the following metalink notes might be helpful
ORA-01555 "Snapshot too old" - Detailed Explanation Doc ID: 40689.1
How To Avoid ORA-01555: Snapshot Too Old When Running PAAPIMP Doc ID: 603259.1
OERR: ORA 1555 "snapshot too old (rollback segment too small)" Doc ID: 18954.1

Creating table on production database

Hi expert I want some real time knowledge
If a user requested create a table on production database where DBA a should contact 1st.
form where dba get approval for create table.
Thanks & Regards
Sanat

are you asking who should DBA contact to ask if its ok to create a table for a user request?
is there a process in place to handle user requests? Follow it. If there isnt, put one in place and ask user to follow it too.
usually some managers approval which then comes to you to review.

How to create a table in Oracle Lite database?

Hi,
I have installed SOA 10.1.3 on my laptop. Now I am trying to create a table in the database to do some own examples. I have problem in installing oracle database. So I am trying to create a table in Oracle Lite database which comes with SOA suite. I am not able to do it, can some body suggest me please?
Regards
Khaleel

HI James,
Thank you so much. I am able to create table and insert rows and able to select them too. However I am not able to use these tables in my BPEL process for my practice. The DB adapter is throwing some error, any idea?
--khaleel

How to use database link to create table in other database?

e.g., java jdbc is connected to the database A.
i want to create one table (Table1)in database B, and then insert data into Table1 select ....from Table2 which is in database A.
i used the create database link (database name) connect to (database) indentified by .....
but ...i got the sqlException as i wrote before.
Thanks again.

http://forum.java.sun.com/thread.jspa?threadID=656868&messageID=3860293#3860293

Can i create table in a database procedure?

Hello
Can i create a table in a database procedure?
create or replace procedure create_table is
tt number;
begin
create table temp (
a number,
b varchar2(100));
end;
it return an error....
regards,
deemy

Hello
Can i create a table in a database procedure?
create or replace procedure create_table is
tt number;
egin
create table temp (
a number,
b varchar2(100));
end;
it return an error....
regards,
deemy
create or replace procedure create_table is
tt number;
begin
execute immediate 'create table temp (a number,b varchar2(100))';
end;
/Cheers
Sarma.

Table Data Source Search Result gives ClassCastException

I set up a table data source and queried it using the following URL:
http://machine_name:port/ultrasearch/query/search.jsp?usearch.p_mode=Advanced
and specified my table data source. The result URLs
came up with the right primary key id. However when I
click the URL, I get:
java.lang.ClassCastException: com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].sql.OrclCallableStatement
at oracle.ultrasearch.query.DisplayUtil.displayTableUrl(DisplayUtil.java:131)
at display.jspService(_display.java:1568)     [SRC:/display.jsp:81]
at com.orionserver[Oracle9iAS (9.0.2.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)
I have specified NUMBER as the data type for my primary key column and it is of type NUMBER in my table DDL. Is that OK or could this be causing the problem?
Dinesh

Dinesh,
Can you provide the following information for creating the table data source:
- Is the table data source based on a table or a view?
- Is the table/view in the local or remote database?
- If the table is in the local database, is the table in the instance owner schema or another schema?
- Do you login to Ultra Search Admin Tool as the instance owner or other users?
- Does the instance owner schema have privileges to read the contents in the table/view?

How do I create a table in MySQL?

Hello!
I need to create a table in the database to be used by a simple process.
How do I create it once I have the SQL ready (just two statements, CREATE TABLE and INSERT)?
Thank you for any hints.
Marcos

Hi Marcos,
There is no harm in creating table in Adobe schema itself.
You can create any number of tables in Adobe Schema and access it, but dont not make any changes in the Adobe Tables.
All the Best.
Regards--
Chalukya

How to create dictionary table using web dynpro?

Dear Experts,
Please clarify my doubts.Im new in this EP development.
Im using EP6 portal with NWDS6 for dev.
My Doubts are :
Im trying to develop a web dynpro application which captures some data and insert/update in Table.
=> If we create a structure Dictionary in web dynpro application will that automatically create the table in Portal database?
=> If it is automatically created how to insert or update that table.
can any one plz help.
thanks and regards,
Viswes.

Hi Visweswara
This will use the concept of EJB.
Refer these for creating Dictionary tables...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70929198-0d36-2b10-04b8-84d90fa3df9c]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1f5f3366-0401-0010-d6b0-e85a49e93a5c]
As far as answer to your second question is concerned,
=> If u create a structure Dictionary in web dynpro application it will not create the table in Portal database..
You can access that table via creating a web dynpro iview in Portal..
Only application can accessed after deployment via iviews in Portal..
Thanks...
Rewards Appreciated...

Create Time Table in Source Database fails

Similar Messages

Maybe you are looking for