Create Z service for leave request

Hi All,
with reference to "ESS in MSS"
Leave request :
"In a similar fashion you can create a Z service for leave request and attach the resource of Leave request which is standard one to it
EMPLOYEE_WORKTIME_LEAVEREQUEST05 to the Sub Area MSS_HCM_SUB_RELATEDACTIVITY_ESS. "
how do i create a z service for leave request?
Regards

I think you wish to use ESS Leave Request in MSS.......
Tcode SPRO...
Cross-Application Components -> Homepage Framework -> Services
Define Services
Copy existing and create your own....
EMPLOYEE_WORKTIME_LEAVEREQUEST
to
ZXXX_EMPLOYEE_WORKTIME_LEAVEREQUEST
EMPLOYEE_WORKTIME_LEAVEOVERVIEW
to
ZXXX_EMPLOYEE_WORKTIME_LEAVEOVERVIEW
Associate a Z resource or existing resource with it....
Then map this Z service with Sub area
"Assign Services to Subareas"
Do not forget to give "Position"
Revert back if you face any issue......
Edited by: Saurabh Agarwal on Jul 20, 2011 12:32 PM

Similar Messages

How to create iView for Leave Request Approval for ESS Tab in Portal

Hello ,
I am new to Enterprise portal. I got a requirement for creating iViews.
How to create iView for Leave Request Approval for ESS Tab in Portal.??
Please give me clearly or provide any document.
Thanks
Risha

Hi Risha,
is it customized application ?
If so in SWFVISU transaction maintaain the entry .
Use transaction SWFVISU to prepare standard setting for your Workitem in the UWL. --Parameters for Work Item Visualization in the UWL.
Have a look at below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/59/d516690e854c7090ae15bf492a869f/content.htm

Error message for Leave request (Related to some Old Question)

Hi Experts, 
 
We are facing an Error when only 1 employee in the company opens his Leave request page, the same page is working for others perfectly. 
 
this Error is the same as the one in the below posts: 
 
1. Link: Re: Error message for Leave request 
 
and I tried going through their solutions such as: 
 
1. Please check if you have the leave config done on ECC side under Personnel Management --> Employee Self services --> Service Specific settings --> Working time --> Leave request . 
2. At the least you should have assign the default rule to your PSG to the standard leave type given. Otherwise create your own rule groups and Specify Processing processes for type of leave set up. 
3. explicitly activate WEBMO Feature although it was activated 
 
But the Error is still coming for this specific Employee, even though his Vacation Quota is created and available for deduction. 
 
Please Help me in solving this issue. 
 
Regards, 
Abdulrahman

Index: 0, Size: 0:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
 at java.util.ArrayList.RangeCheck(ArrayList.java:507)
 at java.util.ArrayList.get(ArrayList.java:324)
 at com.sap.aii.proxy.framework.core.JcoBaseList.get(JcoBaseList.java:268)
 at com.sap.aii.proxy.framework.core.AbstractList.get(AbstractList.java:230)
 at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCList.get(DynamicRFCList.java:281)
 at com.sap.tc.webdynpro.progmodel.context.Node$ModelElementList.getElement(Node.java:2549)
 at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:621)
 at com.sap.tc.webdynpro.progmodel.context.Node.setLeadSelection(Node.java:753)
 at com.sap.xss.hr.lea.form.FcForm.setLeadSelectionForSubtype(FcForm.java:700)
 at com.sap.xss.hr.lea.form.FcForm.setVisibility(FcForm.java:943)
 at com.sap.xss.hr.lea.form.FcForm.prepareCommand(FcForm.java:308)
 at com.sap.xss.hr.lea.form.wdp.InternalFcForm.prepareCommand(InternalFcForm.java:2041)
 at com.sap.xss.hr.lea.form.FcFormInterface.prepareCommand(FcFormInterface.java:116)
 at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.prepareCommand(InternalFcFormInterface.java:1887)
 at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.prepareCommand(InternalFcFormInterface.java:1983)
 at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:299)
 at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:1084)
 at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
 at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:204)
 at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface$External.onInit(InternalVcFormEditInterface.java:280)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
 at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
 at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
 at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
 at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
 at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
 at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
 at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
 at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
 at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
 at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Regarding the exact link for configurate type for leave request

Hi all:
I am trying to Customize Types of Leave/ Absence Types for Leave Requests following the route Personnel Management u2192 Employee Self-Service u2192 Service-Specific Settings u2192 Working Time u2192 Leave Request u2192 Processing Processes u2192 Specify Processing Processes for Types of Leave, but it turns not be there, maybe it is because of the sap version, could you please tell
me the exact route for Customize Types of Leave/ Absence Types ?
thank you very much

sorry , the above link is correct , I found the above linke missing like personnel management--employee self-servce, because Basis didn't delopy some pakcage , could you please tell me what package missed.
thank you very much .
Edited by: jingying Sony on May 7, 2010 7:58 AM

Problem with user services (creating a service for mpdas)

Hi, I'm using mpd and using a user service to start it.
However, I'm trying to create a service for mpdas (a mpd client for last.fm) and getting some errors:
currently, my mpdas.service is as following:
[Unit]
Description=AudoScrobbler client for MPD
After=mpd.service
[Service]
ExecStart=/usr/bin/mpdas
[Install]
WantedBy=default.target
Which giving me the following errors:
(14:49:55) [ERROR] You are not root. Not changing user ..
(14:49:55) [INFO] Connected to MPD.
(14:49:56) [INFO] Last.fm handshake successful. SessionID: ...
terminate called after throwing an instance of 'std::ios_base::failure'
what(): basic_filebuf::underflow error reading the file
Aborted
Which are the same errors I get if I run just "mpdas" instead of running it with sudo.
If I use it as a root service (instead of a user service) it fails on startup, but works fine when I restart the server.
So, I'm assuming:
1) mpdas needs root permission
2) if used as a root service, it fails at startup cause the mpd service (enabled as a user service) hasn't started yet
3) if used as a user service, it fails cause it needs root permission
What's the 'correct' way to solve this? (I believe mpdas should be a user service, cause it runs with a config that is just for my user).
Is there a way to make a user service run with root privileges?
I couldn't figure out the best way to configure it.
Last edited by alv-r- (2014-11-29 18:37:56)

TheSaint wrote:Why should it fails with sudo?
It works only with sudo. It was failing as a system service because it needs mpd, which I configured as an user service. Then when systemd starts the system services (when booting) there's not mpd instance running and it fails.
TheSaint wrote:Doesn't it works with fakeroot ?
As a noob, I don't know exactly how fakeroot works, I'll take a better look at it, but running it with fakeroot takes rid of the errors I was getting when not running as sudo.
The problem I have now is that it still fails on startup, but there isn't any helpful (or unhelpful) message. It just shows the PID and says it failed.
If I run
systemctl --user start mpdas
it works well though. Any ideas of why this happens?
My current unit file looks like this:
[Unit]
Description=AudoScrobbler client for MPD
After=mpd.service
Requires=mpd.service
[Service]
ExecStart=/usr/bin/fakeroot /usr/bin/mpdas
[Install]
WantedBy=default.target
Raynman wrote:Why does it need root privileges? Maybe you just need to configure it properly to run under your normal user?
Seeing the options in the man page and the config options for the config file, I don't see any that could do the trick.
I'll send a message to the developer with the error I'm getting (when not running as sudo).
Last edited by alv-r- (2014-11-29 18:36:59)

How to create web service for a Java class in SAP NetWeaver Studio

hi all,
i am using SAP Netweaver Developer Studio.have created a normal java project and i want to create web service for one of the classes in this project. i used the Web Service Creation Wizard to create a web service for this class. but it says there's no methods available for VI. all my methods in this class are public, what should i do?

Hi,
I guess there are other ways. But this is an easy way, if you find the right wizards.
Besides this it is good practise to define interface methods so that session bean implement these interface methods, and thus seperate the interface from the implementation.
In this approach you will need 3 projects:
An enterprise application project (will contain EJB Module)
An EJB Module project (will contain session bean)
A Java project (contains code that implements the session bean methods)
In my previous post I suggested to use a J2EE web mudule project. This was a mistake, it should be EJB module.
But it should be possible to do it in another way. It is up to you.
Good luck, Roelof

Issue in creating web service for a ABAP Function Module

Hi,
now i'm learning how to create web service for a ABAP Function Module. I used the following steps.
1. select the Function Module, named "zws_test".
2. in the context menu, select "create->proxy object". so we enter into wizard.
3. in the wizard, press the radio button "Service Provider".
4. in the next page, press the radio button "Existing ABAP Objects(Inside Out)".
5. In the next page, Enter the "zws_test_prvider" as Service Definition and select "Function Module" as Endpoint Type.
6. in the next page, enter "zws_test" as Function Module and mark the "Mapping der Namen" button
7. in the next page,select "PRF_DT_IF_SEC_LOW" as Profile and mark "Deploy Service".
8. Save in the local package.
9. then it will pop up a window with title "WSDL Source". i selected "URL/HTTP Destination" and press "OK".
10.in the next page, i enter the URL as "http://hostname:portnumber/", and press "OK".
11. then it will pop up a window with title "Display logs". A record with error message "HTTP error(return code 404, message "Not found")" appears.
12. i press "ok" and a service provider with name "zws_test_prvider" appears in my local package.
13. i use "zws_test_prvider"'s URL to create a service consumer "ZCO_WS_TEST_CONSUMER" and logic portal "LP1".
14. But when i test my service consumer "ZCO_WS_TEST_CONSUMER", it will throw an exception "cx_ai_system_fault" with errortext "SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/".
15. I use t-code SM59 to test connection and get the following info.
      Status HTTP Response     200
      Status Text                      OK
      Duration Test Call             328 ms.
who can give me the reasons about item 11 and 14, and explain me how to create service provider and service consumer for a Function Module.
Thanks in advance
Johnney

have you seen this weblog
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices

XI for create web servicies for SAP R/3 4.6C

Hi All,
we are implementing PM (Plant Management) module of SAP R/3 4.6C and we have the necessity to create web services for some PM functionalities. Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI. Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly. So we think to use SAP EP.
Which is your opinion about this architectural scenario? Is it possible to fulfil the requirement of our business users with a more simple architectural solution (for example with WEB DYNPRO)?
Many thanks in advance for your collaboration.
Regards,
Bob

Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI.
TIBCO is another middleware. So once you expose your R/3 functionalities as web service, you may directly use TIBCO to integrate and XI won't be required at all.
Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly.
WebDynpro application would provide you an easy GUI and could act as Soap client as well to send data.
Regards,
Prateek

Approve Button not visible in Tasks for Leave request in Tasks- MSS

Dear gurus,
Approve Button not visible in Tasks for Leave request in Tasks- MSS, anything missing on config end????
Any suggestions....
regards,
Rajasekar.

hello Bala,
there was some config missing in UWL, now it is working and here we have got some button launch dynpro ..this is leading to pop where we can approve or reject....
Thanks alot Bala..
In this we are getting more info, Display details in SAP GUI, View History, View all Time Approval and Attachments of Documents which leads to leave request details. These may be too flashy for the Manager who are from the typcial production centers....industries...So is there any way out for Hiding these.
Regards,
Raj

How to create a service for Oracle HTTP Server

Hi,
I hope someone can help me.
I would like to create a service for an Oracle HTTP Server.
We are running APEX 3.2 on an 10.2.0.4 database (not XE).
We have a Windows XP system.
To run APEX on a 10g we need the HTTP Server.
Unfortunately no service was created while the installing of the Oracle HTTP Server.
How can I create a service later. After the installation.
I know that you can create a service with Instrsrv.exe and Srvany.exe. But I dont know wheather I can use this in this case.
I need an .exe file for that.
The HTTP-Server has the opmnctl.exe.
But I have to write opmnctl.exe startall when I start or opmnctl.exe stopall when I want to stop it . How can I realize that in a Service?
Thanks for your answer
Jens

Hi,
I hope someone can help me.
I would like to create a service for an Oracle HTTP Server.
We are running APEX 3.2 on an 10.2.0.4 database (not XE).
We have a Windows XP system.
To run APEX on a 10g we need the HTTP Server.
Unfortunately no service was created while the installing of the Oracle HTTP Server.
How can I create a service later. After the installation.
I know that you can create a service with Instrsrv.exe and Srvany.exe. But I dont know wheather I can use this in this case.
I need an .exe file for that.
The HTTP-Server has the opmnctl.exe.
But I have to write opmnctl.exe startall when I start or opmnctl.exe stopall when I want to stop it . How can I realize that in a Service?
Thanks for your answer
Jens

Creating Web service for PL/SQL Procedure with Complex Data Types

I need to created web service for PL/SQL Procedure with Complex Data types like table of records as parameters, how do we map the pl/sql table type parameters with web service, how to go about these?

Hello,
When you are creating a service from a Stored Procedure, the OracleAS WS tools will create necessary Java and PL wrapper code to handle the complex types (table of record) properly and make them compatible with XML format for SOAP messages.
So what you should do is to use JDeveloper or WSA command line, to create a service from your store procedure and you will see that most of the work will be done for you.
You can find more information in the:
- Developing Web Services that Expose Database Resources
chapter of the Web Service Developer's guide.
Regards
Tugdual Grall

Adobe form for leave request

Dear experts,
There is no standard leave request form provided by SAP. We are developing an adobe form which lists the employee's quota and leaves taken earlier along with the current leave details. This form should be displayed to the approvers from the leave workflow.
When the approver clicks on the work item, the leave request form should popup. There are two technical challenges in this requirement -
1. This requirement is similar to the standard ones for travel request and expense request - In travel request and expense request, SAP has provided standard forms and the workflow container is a standard importing parameter in these adobe forms. This container is helpful in deriving most of the content on the adobe form. However, there is no such link in case of leave request. How does the workflow information be passed to the adobe form? ( i will have to display employee details, quota, current leave, approvers list, approvers comments, etc).
2. For leave request, the approval task is TS12300097 that has "Java Webdynpro" as visualization type. Whereas for travel and expense workflow approval tasks, the visualization type is "ABAP Webdynpro". I am assuming the "JAVA WD" will make it really tough to call the adobe form from the work item.
Any thoughts, suggestions on this requirement will be of great help.
Thanks

Hi Abdul
which version u r currently working on?? check in swfvisu t-code where you can find the below task
I'm not that good at technical level, but still I try to help you with my limited knowledge.Instead of trying from binding rule, try with Function Module via BOR Object Method. you can get that function module at the time Adobe form creation. Can't you consider that Adobe form as a attachment in the work item???
Check this links
Adobe forms using Workflow with normal SAP | SCN
Calling the Adobe form in a workflow step for A... | SCN
Hope this Info will be Helpful
Cheers
Pradyp

Create Business Service for Dotnet Webservice?

Hi all,
I have one dotnet Webservice which is implemented from remote server.
I begin create Business service for this service in OSB, but I don't know what I must choice between five Services Type:
- WSDL Web Service
- Transport Typed Service
- Messaging Service
- Any SOAP Service
- Any XML Service
My dotnet Webservice return one String in XML format like that <string>Hello World</string>Anybody can help me ?. If can,please give me full example show how to binding dotnet Webservice to OSB to Weblogic portal
Thank a lot!

Hi Patrick,
I think my dotnet Webservice have WSDL
when I access this address
http://localhost/DotnetWebService/Service1.asmx?Wsdland I receive the result:
<wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
 <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
 <s:element name="HelloWorld">
 <s:complexType />
 </s:element>
 <s:element name="HelloWorldResponse">
 <s:complexType>
 <s:sequence>
 <s:element minOccurs="0" maxOccurs="1" name="HelloWorldResult" type="s:string" />
 </s:sequence>
 </s:complexType>
 </s:element>
 </s:schema>
</wsdl:types>
<wsdl:message name="HelloWorldSoapIn">
 <wsdl:part name="parameters" element="tns:HelloWorld" />
</wsdl:message>
<wsdl:message name="HelloWorldSoapOut">
 <wsdl:part name="parameters" element="tns:HelloWorldResponse" />
</wsdl:message>
<wsdl:portType name="Service1Soap">
 <wsdl:operation name="HelloWorld">
 <wsdl:input message="tns:HelloWorldSoapIn" />
 <wsdl:output message="tns:HelloWorldSoapOut" />
 </wsdl:operation>
</wsdl:portType>
<wsdl:binding name="Service1Soap" type="tns:Service1Soap">
 <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
 <wsdl:operation name="HelloWorld">
 <soap:operation soapAction="http://tempuri.org/HelloWorld" style="document" />
 <wsdl:input>
 <soap:body use="literal" />
 </wsdl:input>
 <wsdl:output>
 <soap:body use="literal" />
 </wsdl:output>
 </wsdl:operation>
</wsdl:binding>
<wsdl:binding name="Service1Soap12" type="tns:Service1Soap">
 <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
 <wsdl:operation name="HelloWorld">
 <soap12:operation soapAction="http://tempuri.org/HelloWorld" style="document" />
 <wsdl:input>
 <soap12:body use="literal" />
 </wsdl:input>
 <wsdl:output>
 <soap12:body use="literal" />
 </wsdl:output>
 </wsdl:operation>
</wsdl:binding>
<wsdl:service name="Service1">
 <wsdl:port name="Service1Soap" binding="tns:Service1Soap">
 <soap:address location="http://localhost/DotnetWebService/Service1.asmx" />
 </wsdl:port>
 <wsdl:port name="Service1Soap12" binding="tns:Service1Soap12">
 <soap12:address location="http://localhost/DotnetWebService/Service1.asmx" />
 </wsdl:port>
</wsdl:service>
</wsdl:definitions>
Do you have any suggestion for me ?
Thanks
Edited by: AS84 on May 11, 2011 12:10 AM

Configuration steps for leave request in ESS/MSS

Hi
I want to configure for leave request approval from ESS/MSS (EP 7.0 and ECC 6.0)
What are the configuration steps if any doc please send.
Thanks & Regards

Hi Rao,
Go through this link for leave request cofiguration steps.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erphcm/leave%2brequest%2bconfiguration%2bsteps
Also visit this link for ESS related issue resolution and hints.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erphcm/commonIssuesandHintsin+ESS
Reagrds,

Work flow for Leave request without ESS

Dear All,
For one of our client, we have configure workflow for leave request, first is it possible to do tht?
If so how to do it?, here we dont have ESS/MSS. Is there any standard workflow available?
Thanx

There is standard workflow task which give by SAP to approve leave request i.e. 12300111.
But I am not sure this workflow task will work with out Portal or not.

Create Z service for leave request

Similar Messages

Maybe you are looking for