Created a new schema user cant manage privileges

Hi,
i have created a schmema (user) i want it to do everything on itself (update,delete etc.) but not other schemas.
what roles/privileges should i grant ?

No, with these two roles the user can pretty much do everything to it's own objects.
The user can create, alter, drop table/index
The owner of schema has full access to it's own objects, therefore, the user can update, delete, insert etc..

Similar Messages

Creating a new schema in a Logical Standby Database

Hi All,
I am experimenting with logical standby databases for the purpose of reporting, and have not been able to create a new schema in the logical standby database - one of the key features of logical standbys.
I have setup primary and logical standby databases, and they seem to be running just fine - changes are moved from the primary to the standby and queries on the standby seem to run ok.
However, If I try to create a new schema on the logical standby, that does not exist on the primary, I get "ORA-01031: insufficient privileges" errors when I try to create new objects.
Show below are the steps I have taken to create the new schema on the logical standby. Any help would be greatly appreciated.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_new
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user new
2 identified by new
3 default tablespace ts_new
4 temporary tablespace temp
5 quota unlimited on ts_new
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to new
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to new
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to new
SYS@UATDR> select * from dba_sys_privs where grantee='NEW'
2 /
GRANTEE PRIVILEGE ADM
NEW CREATE ANY TABLE NO
NEW CREATE TABLE NO
NEW UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect new/new
Connected.
NEW@UATDR>
NEW@UATDR> -- prove ability to create tables
NEW@UATDR> create table new
2 (col1 number not null)
3 tablespace ts_new
4 /
create table new
ERROR at line 1:
ORA-01031: insufficient privileges
NEW@UATDR>
NEW@UATDR>

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

Creating a new schema

This may sound really simple, but I would like to create a new
schema within my 9i database. How do you do that? I have found
how to add just about everything else, but not schemas.
Thanks

Hi,
For create a new user....
You must have privileges to create a user or you must connect to SYSTEM or SYS user.
Regards,
Sailaja

How to create a new schema ?

Hi,
Can someone tell me how to create a new schema please ?
What i need as user & rights ?
Thanks

Hello,
-if i don't have neither sys nor system access, can i create the user "jward" with the oracle user ?You need to be connected to the database to a User who already has the CREATE USER Privilege.
- once the new user created and granted,do i have to run the create schema statement under sqlplus ?It's not necessary.
A Schema is a collection of Objects (Tables, Index, ...) so you can create them with their own CREATE
Statements.
But, you may include these statements into a CREATE SCHEMA statement so that if any error occurs
all the statements are rollbacked.
Please, find enclosed some links about this:
http://download.oracle.com/docs/cd/B19306_01/network.102/b14266/admusers.htm
http://download.oracle.com/docs/cd/B12037_01/server.101/b10759/statements_6013.htm
Hope this help.
Best regards,
Jean-Valentin

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

How to create a new admin user in oracle 9i?.

Hi I am new to oracle. I want to set up a new database for my application.
How to create a new admin user in oracle 9i?. I would like to have a new schema. where I can create tables for my application from scratch.

If I understand your question correctly:
You need to be connected to the database with the user SYS.
open a command-line session and do the following to create an Oracle user with DBA option other than SYS.
C:\>sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 14 08:46:13 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn / as sysdba
Connected.
SQL>
SQL> create user test identified by pass;
User created.
SQL> grant create session to test;
Grant succeeded.
SQL> alter user test account unlock;
User altered.
SQL> grant dba to test with admin option;
Grant succeeded.
SQL> conn test/pass
Connected.
SQL>
SQL> sho user
USER is "TEST"
SQL>Now you have a user with username 'test' and password 'pass' with DBA role with Admin option
Tony Garabedian
From now on you can connect directly with SQL*Plus no need for comman-line. Just provide the username/password and you're logged in.
Message was edited by:
Tony Garabedian

How to create a new schema & tablespaces

hi ,
how do i created a new schema & tablespaces using 10g database express edition ?
tks & rdgs

If you log into sqlplus as the sysdba for your XE database, you can created a schema user here.
Note that database users and apex workspaces are synonymous with each other in XE and hence once the user is created, so is the workspace.
Create user your_user identified by your_password;
grant connect, resource to your_user;
Regards
Duncan

Not possible to open/create a new connection within BT manager on Satellite M40

Bluetooh manager is open and present in system bar.
However it is never possible to open/create a new connection within bluetooth manager as it always say "bluetooh is not ready". Troubleshooting is required but no clear indication is available; button for wireless link is active and I am able to have wifi internet access at the same time.
It is never possible to open access to a PDA or mobile phone for file transfer through bluetooth.
Do i have to reload completely the bluetooth stack or is there another way to troubleshoot the bluetooh system?
Thanks you for replying if possible.

Remove the Bluetooth Monitor software if it is installed. Download the latest BT-stack v5.10.06 here:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/download.php
and install it. Ensure that the wireless switch is turned on and the suitable antenna is selected.
Press Fn+F8 key to select BT antenna. Selection menu only appears if WLAN and BT is inside.
Read the following if you should still have some problems:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

How can i create a new Adminstrator user account ?

How can i create a new Adminstrator user account ?

Go to the System Preferences>Users.
Click the lock if and enter your password, if necessary.
Then click on the "+" symbol below the accounts list.
From the "New Account" menu, select"Administrator" and fill in the rest of the information.
And finally click the "Create Account" button.
Done. A new Administrator user account.

How do I create a new emkey for Enterprise Manager Database Control?

Hi,
I just installed 11gR2.
I am evaluating it.
How do I create a new emkey for Enterprise Manager Database Control?
I tried various combinations of this command:
emctl config emkey
I did find a probable bug:
$ emctl config emkey -emkey -emkeyfile emkey.ora -force -sysman_pwd he11ow0rld
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Undefined subroutine &EmKeyCmds::promptUserPasswd called at /u2/app/oracle/product/11.2.0/dbhome_1/bin/EmKeyCmds.pm line 160, <FILE> line 3.
$
Again,
How do I create a new emkey for Enterprise Manager Database Control?
I do have a copy of my old key but it is no longer good because I reinstalled the repository with these commands:
emca -repos drop ...
emca -repos create ...
Oh, and where is emctl "documented".
I poked around in some book-index links and with the search engine.
I could not find anything.
Thanks,
-Janis

user11892726 wrote:
Oh, and where is emctl "documented".
http://download.oracle.com/docs/cd/B16240_01/welcome.html

Creating a new schema or adding some more tables in existing schema ??

Hi All,
We have a new requirement from the client asking us to include a few new functionalities(pages--- all together a new application has to be embedded into our application) in our application. By adding these new functionalities, the number of hits to our application can be doubled.
As per the above requirement, I would like to know that whether to create a new schema or to create some new tables in the existing database for the new functionalities.
By what way, can I handle the number of requests in a better way? by creating the new schema or by creating the new tables for the new functionalities.
Also I would like like to know what kind of factors will differ between creating a new schema or creating new tables for the new functionalities in the existing schema.
FYI... We are using Cold Fusion as front-end and Oracle 9i for back-end

This the forum for Oracle's SQL Developer tool. You will get better answers in the Database - General forum.
The short answer is that from a performance point of view there will be no difference. The issues are more to do with maintenance.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now. And I can't close preferences window or turn off the computer.
It's stays in the "deleting" but I can't cancel it or close the window.
What can I do?

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Need to create a new technical user in E-Sourcing

Hi,
We have configured E-SOurcing production(ESP) with read-only corporate
LDAP.
Now we have to create a new technical user with 'KMAdministrator'
profile in E-Sourcing.. As the LDAP is read-only, we will not be able
to create users in E-SOurcing.. Also we cannot use any other ID to be
used in the configuration section..
Please guide us about the Best Practices in this scenario
Thanks
Thilip Kumar

Hi Thilip,
There is no way to create KMAdmin user in E-Sourcing if LDAP is only in read only mode.
Ask your LDAP team to create a user for you with limited access and then you can define roles in E-Souring system for KM usage type.
Also you can use any existing technical user present in LDAP.
~Ankush Mittal

How to create a new application user by my application?

Hello,
I want to give the user of my application the possibility to create a new application user if necessary. The creation of a new user should be realized in my application. I tried to find the answer in the apex user guide, but I haven't found it. Can somebody tell me how to create a new application user in the implemented application (one page in application for creating users for my application)?
Thanks,
Bettina

Hello Bettina,
You can do that using the API: www_flow_fnd_user_api.create_fnd_user. If you look at that procedure in SQL Dev (or TOAD or whatever you like), you can see an example and the description of the arguments.
Greetings,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/

Sun IDM 7.0, creating a new extended user object in the repository.

I have tested a change to an existing UserForm used in Anonymous User Registration TaskDefinition. The customer would like to capture a new field of data from the user during the registration, and have it stored in the repository so that it may be used as a differentiators between groups for billing.
Caveat: I am not the guy that originally installed and originally configured the IDM server, nor am I a programmer.
Having said that, I have poked around enough to me able to modify the UserForm to include the drop-down select code, but once saved during the registration process, it is lost once the account is approved.
Is there a rather explicit procedure to create a new extended user attribute within the repository? Someplace where my data can be saved?
Thank you in advance for any assistance you may offer.
Edited by: Jonathan.Hawes on Oct 29, 2010 3:58 PM to correct some spelling

In 7.X user extended attributes shall be first described in the UserUIConfig Configuration object.

Created a new schema user cant manage privileges

Similar Messages

Maybe you are looking for