Created website in flash cs3, wont open once hosted...

I tried to find the answer here in the forums but couldn't,. I'm sorry, i bet this question has been posted before..
I created a website in flash cs3. published it so that I now have an index.html, home.swf and AC_RunActiveContent.js file.
when I upload these to host, the url just shows blank white page. I called customer support of host, godaddy, and they said the server could not find the swf file.
are they named incorrectly? I'm new to this...
thank you very much

According to a quick check there is no file by the name of...
So... two things:
1. Never use spaces in the names of files you intend to use on the web. That space can break code up. It is best to use an underscore if you need to, but not an empty space.
2. After you change the name and get things updated in the code for the new name, make sure your spelling is correct.
After you have loaded the newly named file you should be able to access it directly on the web using ... newfilename.swf
where newfilename is whatever new name you give it.

Similar Messages

Some websites are working some wont open

firefox wont open google or my sky email but will open sky main page?! ive cleared cache cookies etc no luck and run full avast scan..again no luck..now downloading panda activscan as recommended by firefox help but no luck so far. It will allow some other websites to open like ebay though??Any suggestions? thanks

First, try to update to Firefox 11, it does have alot of security fixes and other bugs.
Then, if you still are having other issues, read [[Websites look wrong]], does that help?

Creating metadata in Flash CS3 and reading it in AS3

Is there a way to store metadata in a library symbol in Flash
CS3, and then read it in AS3? For example, I want to have the
following code run:
m_Metadata = 'You're cool!'
I need this data before I can play the movie clip. Is there a
way to store this? I've been trying to find a solution, but it
looks like I'm just going to have to load in a separate XML file
with the data.
Thanks!

Unfortunately there's no simple way to add instance level
code in Flash CS3 or CS4 with AS3. This is a significant authoring
tool deficiency in my opinion.
Making a component... depending on what you want to do, there
can be a lot of overhead. There may also be some very flaky/buggy
behavior in Flash CS3 with custom components if your experience is
anything like mine. However, for basic metadata, try this:
1. Select the Symbol in the Library
2. Right click, choose Component Definition...
3. In the Parameters data grid you can add
parameters/properties. Make sure you set the "Variable" field as a
unique identifier for each parameter. These are the properties
you'll use in AS at runtime to retrieve the values.
4. Now on each instance on the canvas you can go to the
Parameters tab and enter custom values for each parameter.
5. At runtime, you should be able to access the values via
instance_name.variable_name
I believe that will work without actually creating a
component class and making it functional.

Flash cs6 wont open

So iv been having adobe flash cs6 for 6 mouths now but out of no where it wont open.
When ever I click the icon it shows the title credits. (the red box) then just doesn't open and goes back to being like iv never clicked on it in the first place. sometimes it says "importing files" then does noting but other then that i can't get onto flash.
Iv tried running the program as admin and resting my computer but i don't know whats going on.
The only thing is I think "i think" I was playing fallout 2 when it crashed on me and i had to force shut down while flash was open. Then i think that's when it started but im not 100% sure just something to take into account.

reset your preferences by holding shift-ctrl-alt while starting flash cs6. you should see a confirmation dialog if done correctly.
if that fails, reinstall cs6 over your current installation.
if that fails, uninstall cs6, run the cleaner (http://www.adobe.com/support/contact/cscleanertool.html), restart your computer and then reinstall cs6.

CS3 Wont Open in Windows 7--AMD Processor Issue--HELP!

After much, much searching I've found there's been a common issue with AMD Processors on Windows 7 and getting CS3 to run correctly. Apparently a patch was created, that fixed the problem for users with similar issues. But the links to those patches are no longer valid.
I have no phone right now, chat aint working--and I can't email Adobe of course, soooo someone please...
The forum I found with those links and explanations is here:
http://www.sevenforums.com/software/25313-adobe-cs3-64-bit-ultimate-3.html
From there, this pretty much describes it:
"Just bought an HP Pavillion Elite with Windows 7 Home Premium and AMD processor. Photoshop CS3 would install but would hang when accessed. Some forums suggested that Photoshop CS3 is incompatible with this AMD processor and Windows 7 (64-bit). I called HP and was told the software is incompatible. I was just about to return my computer when I found this forum. I downloaded and installed the patch. I then opened Photoshop (for the thousandth time) and voila--it FINALLY opened!!!"
I've also found many other isntances of this complaint with AMD Processors--Photoshop gets a window open then goes into Not Responding. All other applications don't open at all (but are visible in my task manager). So it's not really a Photoshop specific complaint but I'm placing it here.
I've updated graphics card, changed the desktop theme to Classic, not Aero, tried running the programs in different compatibility modes, all to no avail.
This patch these guys are mentioning has GOT to be it. Someone help me get back to work!!
thank you all in advance.

I had not tried "run as administator." What the hell is that?! I see where to do it and all, but honestly, these permissions
/security/owner/administrator issues on Windows 7 are nothing short of ridiculous.
Every time I think Microsoft may have finally done something right...
I'll try that again down the road. For the moment, looks like Adobe Acrobat 8 is completely incompatible with Windows 7 and almst impossible to delete from the system. SO first task--restoring factory setttings.
In the meantime I'll speak to that patch for Licenseing:
Solution 1: I ran it, but didn't seem to do anything. There was no confirmation of a successful "install," or what you might call it. Secondly, when running again, I was never prompted to enter 0.
Solution 2: I believe those settings were already set as described and so I couldn't really make any changes.
Solution 3: Those folders don't exist, so couldn't do that one.
For various other reasons I wasn't having luck with the next couple thanks to stupid permissions. I'll try again once I've gotten back up to speed.
But yea, someone out there seems to have found a CS3 patch. Am I at least to presume that CS5 would def. work on my comp, and therefore, CS6 is a shoe-in?

IWeb created website can no longer be opened by iWeb

I created a website with iWeb several years ago. I am attempting to update that website but the iWeb "Open" option is no longer highlighted and therefore cannot be selected. When I use finder, I tried using the "Open With" capability, but I get an error that the website cannot be opened by iWeb. When I created the website, I had a MobileMe account (however the website is published to a standard hosted web site). I believe the iWeb version is a 2008 version. Any suggestions? Thanks

Do you have your domain.sites file for the site that you created? It is normally located under your User/Library/Application Support/iWeb/domain.sites.
The domain.sites file is where all the information about your site is stored and you need this file to be able to make any alterations to your site.
It does not matter at all where you have published your site of what version of iWeb you are using for that matter. iWeb is unable to open published files - one way street. It only creates html files on publishing.
If you don't have your all important domain.sites files, then you'll have to re-build your site from scratch.

Illustrator CS3 wont open

Hi folks,
Ive recently started having problems trying to open Illy CS3...Im getting the window saying 'The application Illustrator has unexpectedly quit' when I try and open it.
From reading these forums I have done various things that people have said to do, ie:
1) Send the crash report
2) Check font book for any corrupt fonts
3) Deleted fonts I never use.... now I have 288 fonts, is that still too many?
4) Ive created a new user but still no luck
5) Ive restarted the machine a few times
6) Ive went to user/library/preferences and deleted the illustrator cs3 folder
and none of these have worked.
Im using a 24" Imac...2.93 GHz...Intel core 2 duo...4GB memory...and ive still loads of space on disc.
Any help is great.
Thanks

I have to ask you a couple of things first,
Did you quit Illustrator before you trash the Illustrator Settings folder?
Did at the same time trash the com.adobe.illustrator.plist file also in your user's preferences? You can try trashing both but you must first quite Illustrator.
Did you try to disable all your fonts except for the systems fonts?
When you created a new user did you load your fonts under that new users? I think you loaded your fonts, you should not have if you did!
Did you delete the font data base files the AdobeFnt.lst files?
I do not think you did that at all.
I think you have a corrupt font or your scratch disk is pretty full.

Soundbooth cs3 wont open in OS X.6.2

I recently upgraded to MAC OS 10.6.2 and found that Soundbooth CS3 gives me an error message when I try to open. The message is that "SoundBooth cannot open at this time. It must be repaired by first uninstalling and then reisntalling Soundbooth."
I uninstalled and reinstalled Soundbooth and re-downloaded the the OSX 10.5 patch. Any suggestions on how to get Soundbooth to launch? I need to get the CS3 version to open so I can upgrade to CS4.

I posted library pro file etc to desktop but it wont stop asking each time. big pain!
What else have you already tried, other than removing the ProAppSystemID?
Did you try that as described here? Re: Aperture requires the serial number each time
And did you
When did this problem start? After migrating your system to a new computer? In that case reinstall Aperture - Pro applications do not migrate well. And enter the serial number from an administrator account.
Regards
Léonie

Illustartor CS3 wont open - error message

Everytime i open illustator, it gets to the the open file page and then immediatley shuts off. i tried disabling all fonts and restarting my computer but with no luck.
What do i do?

Glamour,
Probably, this is more complicated than a simple preference corruption, but you may rule that out in the following way:
To restore the preferences, you may either Ctrl/Cmd+Alt/Option at startup, or Move the folder with Illy closed. The latter is recommended here because it is reversible and takes care or more issues, but requires a greater effort, especially the first time used. See explanations in the latter.
If you have Vista, remember to reboot before waking the beauty from her sleep. Reinstalling does not replace the preferences.
When it is not something in the Adobe Illustrator CS3 Settings folder, it may be (with tests):
1. Corrupt font(s): you may move all fonts out of the Windows fonts folder (and move them back in);
2. Firewall interference (especially if more than one is running (XP SP2 adds one if activated)): you may turn them off (and on again);
3. Some versions of Acrobat generate many temp files. Too many (64K) causes the problem: you may search and destroy Temp files;
4. Some other inconsistency caused by Adobe Acrobat/Reader: you may try uninstalling and reinstalling (a newer version).
5. Incompatible/old printer definition file for the default printer: you may upgrade the driver, change the default, or set the PostScript driver/PDF to default;
6. Using a US/English version of Illustrator with Windows set to a different language: you may enter Control Panel>Regional and Language Setteings and change to English (and change back).
7. Quicktime/iTunes: uninstall Quicktime and make sure the Quicktime folder is deleted in the Program Files folder; and/or uninstall iTunes.
If none of these possible solutions work, have you made any (other) changes to the PC between succes and failure? New software loaded?

Flash CS5 wont open after working for years? Entry point Not Found

Hi Guys,
I am having a problem opening my Flash CS5 after it working fine since I installed it forever ago. I do not know what could have caused this, and my other cs5 programs are opening fine.
Dreamweaver and Fireworks didnt change all (these 3; along with Flash; are what I use most)
I also open photoshop and aftereffects from my master collection for testing and they opened fine also. I ran a scan using microsoft essentials and found nothing.
I tried run as administrator on flash and it said the same thing.
I am using windows 7 Ultimate N SP1 64 bit
Here is the alert in text.
flash.exe -Entry Point Not Found
The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
AVUI_ButtonChangedMessage@23@@Z could not be located in the
dynamic link library dvaui.dll
Please let me know what is going on here.
Thanks, I really appreciate the help.
Randy

You should be able to cherry pick Flash out to uninstall and reinstall it from the master suite installer if I remember correctly. There's nothing wrong with a fresh reinstall, especially after years. That's a long time to be bulletproof.
Otherwise I can't hand you a commercial DLL but I really don't think your problems will be fixed even if I did. I think it's just hardware doing what it's notorious for, eventually having a fault somewhere. A reinstall of Flash should be fast and will write to new sectors and fix the file.

CS3 Wont open at all???

I have used CS3 to edit my webpage before with no problems at
all.. However recently I cant even open the programme. Regardless
of whether it is opened by the menu bar or via to 'edit in
contribute' button in my web browser it will not open. Just sits
idle on the initial logo box and when I CTRL+ALT+DEL to check it's
function it is not listed as an active programme and claims "not
responding" when I right click to close the text box.
HELP!! this is so annoying!
Any advice or direction would be fantastic.

HI and Welcome to Apple Discussions...
Try deleting this file.
com.apple.LaunchServices.plist
~/Library/Preferences. Move that file to the Trash and restart your Mac.
If that doesn't help, you may need to reinstall the Safari application. Do this from your install disk.
Then click the Apple Menu / Software Updates to bring your Safari application up to date, then repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Photoshop CS3 wont open any files?

I'm running photoshop cs3 and recently every time I try and open a file nothing happens, well what happens is I see the open file box pop up and disappear and then I can not do anything in PS, every time I click something I hear a noise and thats it, I have to restart Photoshop.
The only way to open a file is if I drag and drop a file in PS.
I'm running windows XP service pack 2 if that helps at all, and yes I have reinstalled and the problem still persists.

and if that doesn't work, try this:
http://www.adobeforums.com/webx/.ef4a07f/1

PS CS3 Wont open certain PSD anymore

I have been using some PSD files I got from a friend a couple months ago.
Tonight was the first time I have not been able to open them in CS3.
I get the message saying that the files couldn't be opened because of a program error.
I tried resetting my prefs, I even reinstalled the program, and downloaded the files from their original email, as well as put them in another directory.
Nothing seems to help.
Any ideas why I would suddenly get this issue?

You probably have a network printer installed or such info is stored in the file, causing the notorious issue. Look into that. Make a local printer the system default or even unplug your network...
Mylenium

Creating Mask In Flash CS3

HELP!!!!
I am about to pull my hair out.
I am new to flash and would like to know how to create a
mask. Could someone please send me the step by step instructions on
what to do.
Your help is greatly appreciated.

On the stage, you do it the same as in previous version of
Flash. Right click the layer your mask is on and select the 'mask'
option. It will mask any layers grouped under it.
In ActionScript you would do it like this:
** You need to have imported the Button class into your
library, drag a Button component to the stage and then delete it.
Try the code below in an empty flash file to see how it works.
import fl.controls.Button;
var masked:Shape = new Shape();
var g = masked.graphics;
g.beginFill(0xff0000,1);
g.drawRect(0,0,300,300);
g.endFill();
addChild(masked);
var masker:Shape = new Shape();
g = masker.graphics;
g.beginFill(0x000000,1);
g.drawRect(150,150,50,50);
g.endFill();
addChild(masker);
function applyMask(e:MouseEvent = null):void {
masked.mask = masker;
var myButton:Button = new Button();
myButton.label = "Apply Mask";
myButton.emphasized = true;
myButton.width = 150;
myButton.move(20, 20);
addChild(myButton);
myButton.addEventListener(MouseEvent.CLICK, applyMask);
myButton.y = 325;

CS3 wont open NEF

I can't get these NEF's to open.
I have downloaded the updated camera raw plug in.
I have checked to make sure only one plug in was installed. There were two. I deleted the one I had earlier placed in the "Plug-in > File Formats" file. Because I read an old thread explaining that only one plug in can be installed at a time.
I can not find the original plug-in in the "plug-ins" folder. So I cannot delete it.
I tried using the adobe installer thinking it would uninstall the old plug in for me and it would not work.
I really have no idea what I am doing, I just followed instructions I found in this forum from years ago and was unsuccessful.
Jack

Good link, YammerP! Thanks.
Keeping in mind that Adobe stops adding new camera support to older versions of Photoshop when they release a newer version (so in your case, Camera Raw 4.6 is the latest version that will work with Photoshop CS3), then you'll need to go look up whether your camera is supported in version 4.6.
In general, here's another way to check:
1. Look on one of the following two pages for the latest Camera Raw version update that works with your Photoshop version:
http://www.adobe.com/support/downloads/product.jsp?product=39&platform =Windows
http://www.adobe.com/support/downloads/product.jsp?product=39&platform =Macintosh
2. Follow the link to the highest-numbered Camera Raw update for your version of Photoshop.
3. Follow the link within that page to the ReadMe information for that version of Camera Raw.
4. Go to the section in your native language and look through the complete list of supported cameras to see if your model is there.
If your camera model is not shown there, your options are:
A. Buy a Photoshop upgrade to the latest version so you can open your raw files right into Photoshop.
B. Download and install the free Adobe DNG Converter so that you can convert your raw files to DNG format, which your version of Photoshop can open.
C. Buy Photoshop Lightroom, which also provides a converter. Note that this will not be integrated with your older version of Photoshop.
-Noel

Created website in flash cs3, wont open once hosted...

Similar Messages

Maybe you are looking for