Creating a Mail Client

How to create a mail client using JavaMail and please mention what other softwares are required to do so?
What can we use to store the e-mail addresses? File or Database?
How to send and recieve attachments using JavaMail?
Is it possible
If I am sending the same mail to many recipients how do I hide the irrespective e-mail ids (i.e. the recipient must be able to see only his
e-mail id)
If possible please send us the code along with its explanation.
Please help me (Urgent).

How to create a mail client using JavaMail and please
mention what other softwares are required to do so?The JavaMail download bundle has several examples of
mail clients.
What can we use to store the e-mail addresses? File
or Database?Certainly you could use either. Depends on what your
purpose is for storing them.
How to send and recieve attachments using JavaMail?Read the FAQ.
Is it possible
If I am sending the same mail to many recipients how
do I hide the irrespective e-mail ids (i.e. the
recipient must be able to see only his
e-mail id)Use Bcc.
If possible please send us the code along with its
explanation.It's all in the JavaMail download.
Please help me (Urgent).If it's so urgent, you should've tried reading the FAQ first.

Similar Messages

Creating Folders in Mail Client

I've been using Apple's Mail client for 5 years now and have my Gmail, Mobileme, and work email set up. I have had no problem creating folders (mailboxes) within these accounts. I recently added another email address which was set up through godaddy.com. When I go to create a new folder (mailbox) I am not able to select that account in which to create the new folder. I can select from any of the other accounts or just create the folder on my mac (which I don't do for obvious mobility reasons). Little help?

you can only create mailboxes in IMAP accounts. if this account is POP then you can not add mailboxes to it. POP only downloads yoiur mail from the server and you can not put any messages back on the server with a POP account so a server side mailbox in a POP account is impossible to make.

Has anyone managed to create an email account on the OS X mail client with Exchange 2007?

Hi guys,
the IT chaps of my new employer tell me that it is impossible to use the OS X mail client with Exchange 2007 servers. Is that correct? If so, does anyone know a workaround?
Thanks
Juergen

jthurner wrote:
Hi guys,
the IT chaps of my new employer tell me that it is impossible to use the OS X mail client with Exchange 2007 servers. Is that correct? If so, does anyone know a workaround?
Thanks
Juergen
No workaround needed, open Mail, Contacts and Calendars (in System Preferences) select Exchange, enter your email address and password, opt to setup Contacts and Calendars as well as mail and hit enter. That should set it up (assuming your apparently witless IT dept has setup the autodiscover record correctly at their end)

Win 8.1 2010 Outlook Error message: "Either there is no default mail client or the current mail client cannot fulfill..."

When trying to open Outlook in Win 8.1 I get the error message:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client."
It eventually opens but none of my Mail accounts load. When I click on one of the accounts I get
"Cannot expand the folder. Internet mail is not registered properly. Re-install and try again."
Outlook is set with all its defaults. I've tried going through the Repair routine for Microsoft Office but it doesn't help.

Hi,
To delete a profile, you may try the steps below:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1. Press Windows key + R to open the Run command.
2. Type regedit in the Open field and click OK.
3. Locate the key then right click on it and choose Rename:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem
4. Type OLD at the end of the name.
5. Try opening Outlook and it may prompt that you need to create a new profile.
I hope this can help.
Regards,
Melon Chen
TechNet Community Support

Either there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010

I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view
the email due to this message.
For the record, I am running W7 Ultimate x64 and connected via Excange Server. I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
to that.
What's up?

Hi,
I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
"Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
set it as the default mail client."
You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
will try my best to help you.
Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
===================
1.
Click Start.
2.
Type "default programs" in the
Search box.
3.
Click Default Programs under
Programs in the search results.
4.
Now click Set your default programs.
5.
Highlight Microsoft Outlook on the left.
6.
Click Set this program as default.
7.
Click OK.
Suggestion 2: Start the Outlook program in safe mode
==============
1.
Click Start, point to All Programs, and then point to
Microsoft Office.
2.
Press and hold the CTRL key, and then click the Outlook program you want to start.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
Disable add-ins
Click
File menu, click Options >
Add-in, click Go button in the Manage:
Com-in Add.
Check if there are any add-ins,
clear the checkbox to disable them.
Close the Office program and
restart it.
Add one check back each time to the list of Add-In,
restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Suggestion 3: Test the issue with a new Windows user account
==============
We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
For Windows Vista/Windows 7:
http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
is anything I can do for you, please feel free to let me know.
Sally Tang

Can't setup POP3 E-mail on mail client on my MacBook Pro

So this problem is getting really out of hand and I'm not sure what options I have left. So here are the details:
I'm trying to set up my work e-mail (the site host is Network Solutions) with Mail. There seem to be no problems with the online client. I can sign on without any troubles so password and username are correct. I'm using Mail 4.4. I first enter my name, e-mail, and password with no problems. Then for the incoming mail server I do the same, choosing POP, and I get the following message:
"The POP server "mail.companysite.com" (with the proper domain inserted) is not responding. Try checking the network connection, and that the server name is correct. Otherwise, the server might be temporarily unavailable. If you continue, you might not be able to receive messages."
i get this regardless if i put my username as just username or [email protected] and my network connection is fine as my other e-mail accounts (2 gmails set up as IMAP) work just fine. I've tried using different ports other than the default 110. Still the same problem.
An interesting little quirk is that at one point it actually did work, then suddenly without any changes to anything that I could tell, it stopped. When it was working, I had it set up on my iPod touch and even when it stopped on my computer it kept working on my iPod. But that also didn't last as now I can no longer connect or even set it up.
But wait! There's more. I've tried all the different debugging methods I can come up with, including trying to set it up on different e-mail clients, Entourage and Thunderbird, with the same result. Then I eventually tried it on another computer, on a PC running Windows XP, and wouldn't you know it, it set up without a hitch! so this means that my account is properly set up for this. Furthermore, I know it is possible to use an e-mail client on a mac with this domain as one of my coworkers has set it up on Entourage and Mail as well as his iPhone. I have no firewall settings currently on so nothing should be blocking and i've tried it using several different internet connections in different countries (seemingly then it's not a router or modem issue)
Anyone have any ideas? Any and all help would be greatly appreciated! Let me know if there's any more info you would need me to provide.

Create a New User Account, and as that New User try to set up this one account -- as it is POP, set to leave messages on the server after download. If not familiar with setting up a New User Account, see:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
This will be a useful test, and is not meant to suggest a permanent switch to the New User Account, but rather a test of the Mail application outside of your normal User Account.
Also in System Preferences/Networks click on Advanced, then Proxies and make sure no proxy selections have been checked.
Ernie
Message was edited by: Ernie Stamper

Why does mail sent using the MacOSX mail client not show up in my sent folder when I access my Gmail account in a browser?

I've recently started using my first Mac, and I hooked my work email (Forwarded to Google Mail) and my personal email (Gmail) into the MacOSX mail client. Everything seemed to be going smoothly, until I noticed that sent mail from my work email through the MacOSX Mail client is not showing up in my sent box on any other clients. Sent mail does show up in my personal email in Gmail, though.
Can anyone help me understand why mail sent from the MacOSX Mail client doesn't end up in the sent folder of my work Gmail account? I suspect it has something to do with the forwarding-to-Google process -- a sort of "too many cooks in the kitchen" situation. Has anyone heard of this problem before? What should I try?

I've been noticing that too. Just told me there were 6 outgoing messages, even though I did not create any new messages.
One hypothesis is that it's generating those messages when a rule moves an email from one folder to another.
Can someone at Apple confirm this?

How can I do a clean install of Mac Mail client? ...

... without doing a clean reinstall of the entire OS?
I've been wrestling with my Mac Mail client all day and am pretty sure I've got a corrupted file somewhere, either in the app or in the Home<Library folder somewhere. I've been using the mail app for several years without issues with .mac mail as the primary and a couple of POP accounts from gmail and pacbell. The troubles began late Monday when I was batch deleting some old e-mails from the mail server. The entire inbox (maybe 120+ e-mails disappeared.
Since then, I can receive mail from all three mail providers, but am unable to send via any provider on my Mac Mail client. I have a PC that pulls mail from all three services via POP3, and it's working fine for both sending and receiving.
I was also able to create a .mac account on the Mac Mail client on a spare iMac and had no trouble sending or receiving from it. But the Mail client on my G5 refuses to send. I've reconfigured all the accounts, checked them 10 times, deleted and reinstalled them all, all to no avail, which is why I think there's bad ju-ju in one of the files somewhere.
Any suggestions?
Many thanks.

First find out if you need to reinstall the mail app. Create a new user by going to system preferences >accounts. Unlock the lock and click on the + sign. Create a new user account. Log into the new user by going to the apple menu and logging out. In the new user go to system preferences>.mac. Enter your user name and password. If you can log in here then open Mail. Your .mac mail should be automatically set up. Send a test e-mail to yourself. If Mail works then the problem is specific to your user account and you do not need to reinstall the Mail app. If the Mail works then consider continuing to set up your other accounts in this user. Once your accounts are working in the new user close all windows and applications. Go the the ~/Library/Preferences and holding down on the Option key drag the com.apple.mail.plist to desktop. Now select your hard drive icon in the finder window and double click on the Users folder. Drag the com.apple.mail.plist into the Shared folder. Log out of your new user account and back into your account. Navigate to the ~/Library/Preferences and drag your com.apple.mail.plist from that folder onto the desktop. Open your hard drive and go to the Users folder and open it, then open the Shared folder. Drag the com.apple .mail.plist from the shared folder into the open Preferences window. Close the windows and open mail. Mail should work.

Outlook (former Hotmail) Forum says I need to get a "Mail Client" that works with 10.4.11

Hello Apple Friends:
I have a PowerBook G4 still running Tiger 10.4.11.
Unfortunately, due to virus concerns and spam at work, I have had to use non-apple mail such as Hotmail for well over a decade now. Not a problem! Mac works fine. But the folks over in the "Microsoft" (delete that word after reading it) group felt their Hotmail was too old fashioned and jazzed it up and are calling it Outlook now.
And Hotmail/new Outlook no longer works like it did before on the Tiger OSX of course!
After over a month and reading dozens of Emails (about 20 which I sent myself) to various Forums and help groups, the latest "advice" is that I go searching for an "old style" "Mail client" whatever that is.... that will work with Tiger 10.4.11. And install and transfer it somehow, hopefully without losing or deleting 17 years of contacts and Email, transfer over to using it for my Outlook (I looked at some others who have the great modern Mountain Lion etc OSX systems and read their posts about this and they had significant problems using the new Outlook too.
Problem is, I deal with many very stubborn people who are just not going to spend the time and effort needed to "convert" my "hotmail" address into anything new to replace it, not even counting how many weeks of effort, missed emails messed up communications this will entail and last far into 2014 I'm sure.
The best hope is that someone knows of a "Legacy" site with older mail clients on it (or even older browsers than my Safari 4.1.3 in case someone thinks that is the problem (I also tried it with Firefox, but only can have up to 3.6.28 and TenFoxFour is not highly recommended as it creates unstable computers occassionally)
So I'm caught in the middle trying to upgrade older Mac and without the funds needed to purchase one that has Intel Chip in it for use with something higher than Leopard so I can use the Hotmail/Outlook again.
Sorry for long message, but I wanted to cover all the bases in case someone is searching the data base of the Forum in later months, and hopefully someone else here has has similiar total frustration with trying to continue using the "M--------" free Email product.
While I'm on the topic, I wondered if the .Mac was an Email client?   I had it once but long ago subscrption elapsed and got notice that it became "mobile me" or something like that....just covering all the bases since Apple has so many more choices.
Thanks for reading all of this complicated (you should only see the other Emails!) question. (sorry products and username are wrong for this message can't get the hang of editing them "before" I think of writing the message!).

Hi BDAqua:
Just catching up to your earlier suggestions so hope this is not taken as anything less than the excellent advice and fantastic support you have given me here..
I cannot use the current edition of Sea Monkey 2.17.1 as System Requirements are : 10.6 Minimum, and I have Tiger 10.4.11 max in "non-Intel" G4
Note also that reading details (I always do) I cannot just jump to that one if I could or wanted to as too old a Sea Monkey at 1.1.19. They say to upgrade to 2.0 first, then reset the "profile" page (does anyone remember my password or even what Email I used back in 2004??) before moving on to upgrade (use it at least once in new profile of course!)
So I copied them first here for anyone else's information:
System Requirements, Installation and Uninstallation
Before installing, make sure your computer meets the system requirements. SeaMonkey 2.17.1 will no longer offer to migrate your data from SeaMonkey 1.x or Mozilla 1.x at the first start after installation (bug 689437). In order to upgrade from such an old version, install the last SeaMonkey 2.0 release first, do the one-time profile upgrade, uninstall SeaMonkey 2.0 and then install your target release (e.g. this one).
You can find more details about installation, profile data and uninstallation in our install and uninstall document.
Here are the specifics of Minimum Requirements of Sea Monkey 2.17.1 version:
Mac
Operating Systems
Mac OS X 10.6 or higher
Minimum Hardware
Macintosh computer with an Intel processor
200 MB of free hard drive space
Older System Sea monkey 2.0 requirements are ::
Mac
Operating Systems
Mac OS X "Tiger" (10.4)
Mac OS X "Leopard" (10.5)
Mac OS X "Snow Leopard" (10.6)
Minimum Hardware
Macintosh computer with an Intel x86 or PowerPC G3, G4, or G5 processor
256 MB RAM
200 MB of free hard drive space
But..... Caution signs are EVERYWHERE not to download or use this anymore.....
(I know my 1.1.19 is really old but so old no one bothers with it anymore?? but newer ones may have huge security loophole for viruses etc....
Sea Monkey 2.0.14 Warns:
Released April 28, 2011
WARNING! The SeaMonkey version available for download from this page is outdated and suffers from known security vulnerabilities. This page is only available for historic reference.
We strongly advise you to download the current release instead.
So I'm sorry if I could not follow your instructions and get a better Sea Monkey Experience as well..... I'm just using existing one as another browser in addition to the newer ones provided as I use them for different purposes, i.e. Sea Monkey can be great for just interrupted "look ups" on google, etc of a quick definition and then closing it, so nothing complicated, no Java/Adobe Flash ads requirements, etc in and out that's all.
Then I can leave my major browsing and using Email Hotmail/Outllook which prompted this whole exploration of solutions for the two brand new browsers TenFourFox and OmniWeb..
Thanks again to everyone! I replied to everyone below in addition to this reply above to BDAqua....

How do I build a mail client?

Hi,
I need help with building a mail client. I have already done some of the coding but i'm finding it diffcult as i'm new to java programming. I'm trying to build a mail client to send and receive email using javamail. The problem i'm having at the moment is that everytime I click on the send button I get an error message saying (java.net.ConnectException: Connection timedout: connect). Here is the code:
Note: Many of the codes are generated because i used netbeans. I need help please.
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.IOException;
import java.util.Date;
import java.util.Properties;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeMessage;
import javax.swing.JOptionPane;
** To change this template, choose Tools | Templates*
** and open the template in the editor.*
** New_Message.java*
** Created on 10-Nov-2009, 19:55:18*
** @author Haruna*
*public class MessageWindow extends javax.swing.JFrame implements ActionListener{*
*/* EmailClient emailClient;*
public static final int NEW = 0;
public static final int REPLY = 1;
public static final int FORWARD = 2;/*
private String to, content, subject, host;
private Session session;
*/** Creates new form New_Message */*
public MessageWindow(/int type, Message message*/) throws MessagingException, IOException {*
*/* super("");*
*switch(type){*
default:
setTitle("New Message");
break;
case REPLY:
*// sets the address to Reply*
setTitle("Message Reply");
to = message.getFrom().toString();
*// sets the message subject*
subject = message.getSubject();
*if (subject != null && subject.length() > 0) {*
subject = "RE: " + subject;
*} else {*
subject = "RE:";
*// Get message content and add "REPLIED TO" notation.*
*content = "\n----------------- " +*
*"REPLIED TO MESSAGE" +*
*" -----------------\n" +*
emailClient.getMessageContent(message);
break;
*// Forward message.*
case FORWARD:
setTitle("Forward Message");
*// Get message subject.*
subject = message.getSubject();
*if (subject != null && subject.length() > 0) {*
subject = "FWD: " + subject;
*} else {*
subject = "FWD:";
*// Get message content and add "FORWARDED" notation.*
*content = "\n----------------- " +*
*"FORWARDED MESSAGE" +*
*" -----------------\n" +*
emailClient.getMessageContent(message);
break;
initComponents();
public String getFrom()
return fromField.getText();
public String getTo()
return toField.getText();
public String getSubject()
return subjectField.getText();
public String getContent()
return contentArea.getText();
*/* public String getHost()*
public void sendMessage()
*try {*
*// Initialize JavaMail session with SMTP server.*
Properties props = new Properties();
props.put("mail.smtp.host", smtpField.getText());
session = Session.getInstance(props);//.getDefaultInstance(props, null);
*// Create a new message with values from dialog.*
Message newMessage = new MimeMessage(session);
newMessage.setFrom(new InternetAddress(fromField.getText()));
newMessage.setRecipient(Message.RecipientType.TO,
new InternetAddress(toField.getText()));
newMessage.setSubject(subjectField.getText());
newMessage.setSentDate(new Date());
newMessage.setText(contentArea.getText());
*// Send new message.*
Transport.send(newMessage);
*} catch (MessagingException e) {*
*//e.toString();*
showError(e.getCause().toString(), false);
*// Show error dialog and exit afterwards if necessary.*
*private void showError(String message, boolean exit) {*
JOptionPane.showMessageDialog(this, message, "Error",
JOptionPane.ERROR_MESSAGE);
if (exit)
System.exit(0);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
@SuppressWarnings("unchecked")
// <editor-fold defaultstate="collapsed" desc="Generated Code">
private void sendButtonActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
sendMessage();
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
//int type = 0;
// Message mess = null;
MessageWindow mw = null;
try {
mw = new MessageWindow();//type, mess);
} catch (MessagingException ex) {
Logger.getLogger(MessageWindow.class.getName()).log(Level.SEVERE, null, ex);
} catch (IOException ex) {
Logger.getLogger(MessageWindow.class.getName()).log(Level.SEVERE, null, ex);
mw.setVisible(true);
public void actionPerformed(ActionEvent e) {
throw new UnsupportedOperationException("Not supported yet.");
}

Fortunately most of that randomly-bolded stuff you posted is irrelevant. And the one line which is relevant isn't helpful.
You'll want to make sure that the server you're connecting to (the mail.smtp.host property) is actually running an SMTP server, and that you can connect to it and that there isn't a firewall or anything blocking you.
And you should read the JavaMail FAQ. There's a whole section in it about this question and other sections about other questions you are going to have.

Create a Secure Client for a Secure Web Service- is failing

Hi,
This is actually with reference to the webservice tutorial.I am trying the example on Create a Secure Client for a Secure Web Service and have followed all the steps mentioned,however I am getting the following error:
D:\JDev11gTp\jdk\bin\javaw.exe -client -classpath D:\Jdev11gTpInstance\mywork\WebServiceApplications\.adf;D:\Jdev11gTpInstance\mywork\WebServiceApplications\WebServiceProjects\classes;D:\JDev11gTp\webservices\lib\jaxws-api.jar;D:\JDev11gTp\webservices\lib\jws-api.jar;D:\JDev11gTp\webservices\lib\orawsmetadata.jar;D:\JDev11gTp\webservices\lib\wsclient.jar;D:\JDev11gTp\j2ee\home\lib\activation.jar;D:\JDev11gTp\j2ee\home\lib\ejb.jar;D:\JDev11gTp\j2ee\home\lib\jms.jar;D:\JDev11gTp\j2ee\home\lib\jta.jar;D:\JDev11gTp\j2ee\home\lib\mail.jar;D:\JDev11gTp\j2ee\home\lib\servlet.jar;D:\JDev11gTp\webservices\lib\jaxrpc-api.jar;D:\JDev11gTp\webservices\lib\wsserver.jar;D:\JDev11gTp\webservices\lib\wssecurity.jar;D:\JDev11gTp\webservices\lib\wsdl.jar;D:\JDev11gTp\webservices\lib\orasaaj.jar;D:\JDev11gTp\webservices\lib\saaj-api.jar;D:\JDev11gTp\webservices\lib\orawsdl.jar;D:\JDev11gTp\webservices\lib\orawsrm.jar;D:\JDev11gTp\webservices\lib\orawsrel.jar;D:\JDev11gTp\webservices\lib\jaxr-api.jar;D:\JDev11gTp\webservices\lib\orajaxr.jar;D:\JDev11gTp\webservices\lib\relaxngDatatype.jar;D:\JDev11gTp\webservices\lib\xsdlib.jar;D:\JDev11gTp\webservices\lib\mdds.jar;D:\JDev11gTp\webservices\lib\wsif.jar;D:\JDev11gTp\webservices\lib\fabric-common.jar;D:\JDev11gTp\webservices\lib\fabric-interceptors.jar;D:\JDev11gTp\jlib\jaxen.jar;D:\JDev11gTp\jlib\oraclepki.jar;D:\JDev11gTp\jlib\ojpse.jar;D:\JDev11gTp\jlib\jsr106.jar;D:\JDev11gTp\jlib\jsr105.jar;D:\JDev11gTp\jlib\osdt_xmlsec_jce.jar;D:\JDev11gTp\jlib\osdt_wss_jce.jar;D:\JDev11gTp\jlib\osdt_saml_jce.jar;D:\JDev11gTp\jlib\osdt_saml2_jce.jar;D:\JDev11gTp\jlib\osdt_core.jar;D:\JDev11gTp\jlib\osdt_cert.jar;D:\JDev11gTp\jlib\osdt_xmlsec.jar;D:\JDev11gTp\jlib\osdt_wss.jar;D:\JDev11gTp\jlib\osdt_saml.jar;D:\JDev11gTp\jlib\osdt_saml2.jar;D:\JDev11gTp\jlib\ojmisc.jar;D:\JDev11gTp\j2ee\home\lib\http_client.jar;D:\JDev11gTp\j2ee\home\jazncore.jar;D:\JDev11gTp\j2ee\home\oc4jclient.jar;D:\JDev11gTp\rdbms\jlib\xdb.jar;D:\JDev11gTp\j2ee\home\lib\javax77.jar;D:\JDev11gTp\lib\java\api\jsr173_api.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-impl.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-xjc.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb1-impl.jar;D:\JDev11gTp\j2ee\home\lib\oc4j-schemas.jar;D:\JDev11gTp\jlib\ojdl.jar;D:\JDev11gTp\jlib\ojdl2.jar;D:\JDev11gTp\jlib\fmw_audit.jar;D:\JDev11gTp\j2ee\home\lib\jmxri.jar;D:\JDev11gTp\j2ee\home\lib\jmx_remote_api.jar;D:\JDev11gTp\j2ee\home\lib\adminclient.jar;D:\JDev11gTp\j2ee\home\lib\jmxframework.jar;D:\JDev11gTp\j2ee\home\lib\jmxspi.jar;D:\JDev11gTp\j2ee\home\lib\xmlcfg.jar;D:\JDev11gTp\jlib\dms.jar;D:\JDev11gTp\jlib\orai18n.jar;D:\JDev11gTp\j2ee\home\lib\commons-digester.jar;D:\JDev11gTp\j2ee\home\lib\spring.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-policy-core.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pmclient.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pap.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-agent.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-secpol.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javamodel-rt.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javatools-nodeps.jar;D:\JDev11gTp\lib\java\shared\oracle.toplink\11.1.1.0.0\toplink-sdo.jar;D:\JDev11gTp\lib\java\api\jaxb-api.jar;D:\JDev11gTp\lib\xmlparserv2.jar;D:\JDev11gTp\lib\xml.jar;D:\JDev11gTp\jakarta-taglibs\commons-logging-1.0.3\commons-logging.jar -Dhttp.proxyHost=localhost -Dhttp.proxyPort=8099 -Dhttp.nonProxyHosts= -Dhttps.proxyHost=localhost -Dhttps.proxyPort=8099 -Dhttps.nonProxyHosts= HelloPolicyPortClient
Feb 1, 2008 5:13:43 PM oracle.j2ee.ws.common.context.ContextInterceptor init
INFO: Context provider properties file not found
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-AGENT busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-AGENT filter=false auditor=oracle.security.audit.Auditor@143a083
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-PM-LIB busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-PM-LIB filter=false auditor=oracle.security.audit.Auditor@15af049
SEVERE: WSM-04514 An MDS error occurred.
SEVERE: WSM-09012 No key, WSM-06002, was found in the resource bundle oracle.wsm.resources.policyvalidation.PolicyValidationMessageBundle.
javax.xml.ws.WebServiceException: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:466)
at oracle.j2ee.ws.client.jaxws.WsClientProxyInvocationHandler.invoke(WsClientProxyInvocationHandler.java:204)
at $Proxy28.sayHello(Unknown Source)
at HelloPolicyPortClient.main(HelloPolicyPortClient.java:35)
Caused by: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.integration.platform.common.InterceptorChainImpl.createPolicyEnforcementException(InterceptorChainImpl.java:217)
at oracle.integration.platform.common.InterceptorChainImpl.processRequest(InterceptorChainImpl.java:104)
at oracle.j2ee.ws.client.mgmt.runtime.SuperClientInterceptorPipeline.handleRequest(SuperClientInterceptorPipeline.java:91)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:309)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:290)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:444)
... 3 more
Process exited with exit code 0.
Can anyone please give any clue as to why this error is coming?
Thanks.

Hi
Please refer to this thread
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

Forms 6i, open default mail client and add attachment to message

Hi,
I would like to use some functionality in my forms application. I want call some action, that opens default mail client in windows platform and add some attachment to message. I want to do this for my reports. I am exporting reports to PDF files. I am using oracle forms / reports 6.0.8.12.1 version. And I cant use build-in PDF export functionality, because exported PDF files are in old PDF version and I have problem with Czech charakters. So I am using my own virtual PDF printer for printing reports. A now I would like to send report as mail attachment. I know that there is this functionality in report preview. When I click button with letter image (showed on screenshot at http://img20.imagevenue.com/img.php?image=00067_screen_122_899lo.JPG) the default mail client is opened in this is created new messages with report (eps) in attachment.
That is what i need. Only open default mail client and add own attachment to message.
I found only one solution for Outlook, but I need open default mail client (for example Mozilla Thunderbird etc.)
Can You help me? Or send some solution how it is solved in report previewer?
Thank you.

Hi,
metalink Note 47498.1 "Programmatically Sending a Fax/Email via Microsoft Exchange" may be a good documentation for you. Have a look in there.
regards,
Heike

Email Error no default mail client

I tried support on this one and no one had an answer.
I created a new form with 4 fields and the submit by email button and the print form button. The print form button works, but when I click the Submit by email I get the following error.
Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mial client.
Working with the support person we updated to the most recent version (9.4) of Acrobat and he had me remove Office 2010 from my machine and reinstall. Same problem. I also at that time recreated the form in the latest version, Same problem. The Outlook program is the default on this machine.
I am running Windows 7 Ultimate, Office 2010 Pro Plus, Adobe Acrobat 9 and Adobe Elements.
I have a number of forms to build but hessitate in getting into them until I know this is going to work. Most of our office is on Windows 7 and Office 2010.

Check out: http://www.pdfemail.net/
PDFEmail.net can send PDF form submissions without using Client side e-mail software such as OUTLOOK.
PDFEmail.net is a standalone Windows ASP.net script generator, and includes FDFToolkit.net by NK-Inc.com.
HOW IT WORKS:
Create your scripts with PDFEmail.net for either ASP.net 1.1, or for 2.0 or greater.
Upload the Files to your web server, local or remote.
Create a submit button, and change the submit action on the button to point to the script
Client opens the PDF in a browser or standalone reader, and clicks submit, and the form or data is e-mailed to the designated list of recipients.
Client gets response or redirected to URL based on sent or not sent
PDFEmail.net includes 1 year of free technical support and download updates w/ a manual subscription renewal.
PDFEmail.net utilizes iTextSharp technologies. PDFEmail.net requires zero programming knowledge, and creates scripts you can modify if you choose to do so. Create unlimited scripts on unlimited servers for unlimited clients. PDFEmail.net requires an SMTP server, and a Microsoft .net web server.
For PDFEmail.net examples:
http://www.nk-inc.com/software/pdfemail.net/examples/
To contact me through our website:
http://www.nk-inc.com/support/sales/
Message was edited by: NKOWA

"no default mail client": windows 7, adobe reader 11, office 2013

re: Error: "Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run MS Outlook and set it as the default mail client etc."
Does anyone know how to permanently stop this error, when simply tring to launch a PDF to view it????
Windows 7, Office 2013, Acrobat Pro 11.0.3
A test was done to uninstall reader 11, and reinstall 9.5, which at least allowed the PDF to be viewed on one computer, but did not fix other apps needing to interoperate with PDF and email (i.e. attach and email).
Is this a windows 7 registry problem, or a DLL problem?
R.
Message was edited by: Randall_J

Hi Randal,
Firstly even though Outlook is set as default mail client you need to reapply the same from 'Start> Default Programs> Set Default Programs'
Now check if you still face the issue.
If Yes then you MUST add an email account in Reader to eliminate this message
In your Reader Preferences under Email Accounts, click Add Account>Other
In the Add Webmail Account window, input your email account details
Under Advanced Settings, configure your incoming and outgoing ports and security settings per your email account
Click OK, and then click Add. In the window, click the email account you just added and click "Make Default"
When it's set as the default mail account you'll see a check mark, and you WON'T see the error message anymore.
In case you still face issues please try the following registry change:
The registry edit is here for Office 2013 64 bit click to run installations that will enable Outlook 2013 to be recognized by third party applications:
1. Create registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\15.0\Outlook
2. Create String value:
Bitness
3. Set the String value for Bitness to:
x64
Note: Please backup the registry before trying to modify it.
There's also a MS hotfix which you might want to run: "Either there is no default mail client or the current mail client cannot fulfill the messaging request" error message w…
Let me know if this helped.
Regards,
Rave

Either there is no default mail client or the current mail client cannot fulfill the messaging request" error message when you send e-mail from Office 2010 in Outlook

Hi,
If save and send as attachment used in MS Office 2010 then outlook 2010 displays error "Either
there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010"
Windows 7 32 bit Enterprise edition and Offoce Professional plus 2010 32 bit is installed in the machine.
I have followed the below troubleshooting steps but still getting the same error.
Method 1:
Followed the Microsoft fix
http://support.microsoft.com/kb/813745
1. On the Windows taskbar, click
Start > Run.
2. In the Open box, type the following text:
3. regedit
4. Press Enter.
5. Go to the following registry key:
6. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail
7. In the right pane, right-click
the following registry value:
8. PreFirstRun
9. Click Delete
10. Click Start, and then click Run.
11. In the Open box, type regedit, and then pressENTER.
12. InRegistry Editor, locate the followingsubkey in the registry:
13. HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
14. Select thesubkey, and then pressDELETE.
15. Click
Yes.
Method 2:
Repaired Office
Method 3:
fixmapi.exe. Mapi32.dll
Method 4:
Created the below registry key HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Offlce\15.0\Outlook
Create the following String value if it does not exist: Bitness Set the String value for Bitness to the following if it is not already set to x86
Method 5:
Compared the installed applications
Uninstalled the below program :Microsfot Visuall C++ 2008 Redistributable - x86 - KB2467175" and installed "Microsfot Visuall C++ 2008 Redistributable - x86 - 9.0.21022"
Please help to solve the issue.
Regards,
Boopathi S

Hi,
Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
in Office applications, like Excel or Word?
Is this an issue that come up recently? Have you ever made any changes to your system?
If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
http://support.microsoft.com/kb/223877
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Creating a Mail Client

Similar Messages

Maybe you are looking for