Creating a new Business Place

Hi all,
Is it advisable to replace an existing Business place with a new Business place.
If I go for creating a new Business place for a company code, what else points I have to take care of, where else this Business place has to be change.
Thanks in advance
Mayank

Dear Bhargava,
This is the path to create New Bussiness Place
The same has to be done in Financial Accounting (New) > Financial Accounting Global Settings (New) > Withholding Tax > Extended Withholding Tax > Basic Settings > India > Define Business Places
Can be defined under :
1.Tax on Sales/Purchases > Basic Settings> South Korea
--> Business Places --> Define Business Place
2. Withholding Tax>Extended Withholding Tax>India --> Define Business Places
For any t.code not only FB60.
Prerequisite :
BSEG - GSBER = 1100 ( this is our business area)
Substitution :
BSEG - BUPLA = B001
BSEG - SECCO = B001
In the above condition whenever the system finds the business area is 1100. Automatically substitute the below two fields.
if u want only for transaction code FB60. Specify the transaction code in the place of business area or u can specify both by adding AND.
I Hope this helps you
Prem

Similar Messages

  • How to create a new business group in production instance?

    Hi All
    How can I create a new Business Group in Oracle Apps in a production Instance where there wont be any HRMS responsibility. Do I need to create a new Business Group through Inventory responsibility ? Any documents about this issue?
    Thanks and Regards
    M.A.Rahman

    why do you need to create a new business group? To implement HR? If so, linking a HR responsibility to your user, is one of the few steps to go anyway.
    How you did it on the test environment?
    Why not link a hr resp to your user temporarily, and disable it later.
    I'm always afraid to answer this kind of questions, since the real requirement is not described.

  • How to create a new Business Unit

    Hello,
    I have problem.
    Can anyone tell me
    1 : How to create a new Business Unit, New Company from Jd Edwards screen means webpage.
    2 : Can i find the User Defined Codes means UDC in jd edwards screen.
    Thanks,
    Shakti Prasad Priyakumar.

    First, let me confirm that you are on JDE World, and not JDE Enterprise One/One World. They are very different environments. JDE World is normally a green screen, IBM Client Access based system.
    If you are on a JDE World menu and you have the proper security access, just type in UDC on the command line and hit <ENTER>. You hopefully are in a test environment when you do this, since it sounds like you have very little knowledge of JDE. The UDC screen will come up. If you know the system code and code of the UDC table you want to look at, you can key them in and bring up that table. Otherwise, do F5. That will let you search by system code and see what table codes are available in each system. If you are not sure what UDC table you need, you can look at the JDE data dictionary for the data item you are interested in and that will tell you the UDC table, if the data item is UDC based.
    As for setting up new business units and company, get to the main general ledger menu. Don't remember the exact path, but you want to get into the setup/define menu for general ledger accounts. There will be separate options there for maintaining companies and for maintaining business units. You want to play with this in a test environment before you do anything for real.
    Hope this helps a bit.
    John Dickey

  • BP: How to hide "Validity Period" on screen Create a new Business Partner

    Hi,
    On screen Create a new Business Partner, I want to hide field Validity Period
    -> Please tell me how to do in Customizing
    Thanks and Best regards
    Ms.Minh

    Hi,
    For each BP role, you can control the field status in configuration under BP-Role Settings. Please check whether validity period is available for field configuration or not.
    Regards
    Prasad AV

  • How to create a new business partner for notification with function module?

    Hello,
    I got a problem when I want to create a new Notification with its businiss partner (BAPI_ALM_NOTIF_CREATE). I can't find the proper way to create the new business partner. Anyone offer some help?
    Thanks a lot!
    Morgan

    when I look at the function you can transfer the partner in NOTIFPARTNR table.
    You must already have defined the appropiate partnerroll in customizing for you're businesspartner
    or do you have another problem with this function ?

  • I cannot create a new business catalyst site with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with server, try again later. How can I fix this problem?

    I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
    Thanks

    Hi Ozy08,
    Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
    If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
    Thanks,
    Preran

  • Creating a NEW Business Group, NO Security Profile generated

    Platform : R12 running on Linux86 --> FRESH install ( NOT Vision db )
    Resp : Global HRMS Super User
    Problem : No Security Profile generated for NEWLY created Business Group
    After creating a NEW business group ( ie. BG1 )
    I am able to see both BG1 and Setup Business Group ( I an view both Business Groups via Organization screen)
    When I access the Security Profile screen using the same resp "Global HRMS Super User"...
    I can ONLY see the default security profile ( Setup Business Group )...
    I am NOT able to view the default security profile ( BG1 ) that should have been created when I created my new business group earlier.
    NOTE : If I use the VISION db, and do the exact same thing... I can see both Security Profiles.. and both Business Groups.
    If I use the FRESH db, I can see both Business Groups... BUT... only 1 Security Profile... ( Setup Business Group )
    WHY ??
    Someone please HELP !!
    Thank-you
    Charlie :)

    hi charlie i tried the same in my vision instance, i am able to view my BG at the security profile level,
    when you query the system profiles,have you enabled the display checkbox at the responsibility level and try, or create an new responsibility and try... let me know the navigation you done clearly,
    Raj

  • Re: Define new business places or issuing branches.

    Hi All,
    I have defined some new business places or issuing branches for one company code. Now I need to do testing for the new defined business places..
    Can some one tell me what need to be tested and included in test document for this requirement. Here is the menu path for defining new business places or issuing branches..
    spro-cross application components-general application function-cross application document numbering-define issuing branch..
    please advice..
    regards,
    chandu

    ooooohh now replays..it's ok
    chandu

  • Create a new Business Partner with LSMW

    Hello,
    We want to create a new BP using LSMW. We chose IDoc basic type CRMXIF_PARTNER_SAVE_M03. We want to create it with internal number assignment (we don't have BP ID or BP GUID). Unfortunatelly, when we leave PARTNER_NO and PARTNER_GUID fields empty, we get an error message that we should supply at least BP ID or BP GUID. So what values should we enter in order to create a BP with internal number assignment?
    Thanks in advance,
    Sergey Kozyrev

    Hello Sam,
    We don't want to enter any IDENTIFICATIONUMBER because we don't want to see it after in the identification table for the created BP that is presented in the user WebUI. We only want to create a BP with internal number assignment and have an ability to enter all BP data. If it is not possible with IDocs, maybe there is some FM that can perform it?
    Thanks in advance,
    Sergey

  • How to create a new place in iPhoto 11 without doing any harm?

    Yes, I know how to create a new place for a photo -- theoretically:
    Select the photo.
    Make sure the Info icon in the lower right portion of the iPhoto window is clicked and the too-tiny-for-any-but-the-youngest-eyes map is displaying.
    Click in "Assign a Place..." and begin typing a place that iPhoto will search for.  It searches in both "your places" (i.e., those that you have already defined) as well as in Google Maps.
    When you see a place in the search results list that you think might be close to the one you mean, select it.
    A pin appears on the itsy-bitsy map.  Move it to the exact place you mean.  You can make controls appear on the map by moving the mouse over the bottom of the map.  The controls allow you to zoom in and out, and to change views (Terrain, Satellite, Hybrid).  When the pin is where you want it, click it. The current name of the location appears.  Modify it to the name you want, then click the check mark.
    That's "all" there is to it ... except for a couple of "gotchas."
    There's a difference between what happens when you select a place that you've defined and when you select a place that Google found in the search results.  If it's a place that you've defined, and you then move the pin to a new location and/or change its name, this will affect all photos assigned to the custom place.  In effect, you are modifying the place.
    All places have a radius associated with them, thereby making them circles.  You can adjust the radius only in the Maintain My Places window.  In the itsy-bitsy map it doesn't even appear.  However, if the newly defined place overlaps existing ones, all the photos assigned to the overlapped places will be assigned to the new one.  Their pins will remain where they were.
    Now, before anybody suggests sending feedback to Apple, let me emphasize that I have been sending Apple feedback on the wrong-headed implementation of Places since iPhoto 9.0.  New versions have come and gone (the current one is 9.1.2), but these "features" have remained.  So my purpose in opening this thread is to consolidate work arounds to these "features" in one place.  My work around: 
    Whenever I define a new place, I select only a single photo.  I try to name my places so that I can distinguish them from those that Google finds.  In order to avoid Gotcha 1 I select a place that Google finds and try to place the pin close enough to where I want it, but far enough from any other places that I've defined.  I give it a name that I can easily find it Manage My Place.
    I immediately open Manage My Places and select the new place.  I first note the pins near it, then decrease its radius, move the pin to the desired location, note the nearby places, and give it its final name.
    I then view Places and navigate to the new place to view the photos assigned to it.  If I'm lucky, there's only one.  Otherwise, I have to reassign the other photos to their correct places.
    Richard

    So... in the hope it will not confuse folks more, let me be more specific of a procedure that works for me...
    Procedure to create a new My Places location.
    OK there is more you can do with a non-GPS Coord linked photo.
    Click Info and then click Assign a Place in the lower right of screen. (if your photo has a location linked to it already the Assign a Place will NOT show up.)
    Choose a location name near the actual location that Google Maps can find.
    Click that location in the Google Maps list that appears and your photo will be temporarily assigned to that location.
    Now  type over that  location name in order to make sure to give that location a unique name that will show up in your My Places list and click that name after you have typed it  to be sure it is accepted.
    Now in iPhoto click Window/Manage My Places and go the that newly named location in the large My Places map. There's no easy search. You have to run down through the alphabetical list.
    Drag the flag to the location you want this place to be and click Done.
    The location name is now in your My Places list at the location you dragged the flag to!
    It is important to note that only your unique named locations show up in your Places list, so if you want to modify the location coordinates you have to establish a unique name for it.
    This is much more complicated that previous iPhoto versions!
    But Yeah!!!!!!!!!!
    It really works!!!!!!!

  • Can't create new business catalyst site in Dreamweaver

    Hello,
    This question has been asked on the forums before but an answer has never been provided.
    I'm trying to create a new Business Catalyst site in Dreamweaver but when I click "New Business Catalyst Site" a blank dialogue box pops up for about 2 seconds and disappears again. This happens no matter where I try to create the new site from.
    Any ideas?
    Thanks

    I followed these easy steps and it worked for me.
    Make sure to run as administrator.
    here are the instructions.
    http://blogs.adobe.com/dreamweaver/2013/01/resolution-12-0-3-users-running-into-browserlab -business-catalyst-issues.html

  • How and what's to customizen in AA while a new business area created

    My customer created a new business area and after this has been done, heu2019s depreciation run didnu2019t work anymore. Anyone can help me? 
    If you create a new business area, what should you do in the customizing (SPRO) in point of view of AA? Thanks in advance.

    Hi Paul, thanks for your quick replay. The error is wiht the No. K1235 - the account 99960000 needs relevant assignment.I checked via ACSET: the deprecialtion area ist "20" and the account assignment objects is KOSTEL (either for periodic Posting or account assignment for deprecialtion). It worked before the new BA has been created - that's why Im wondering if there are somewhere need to be customized. it would be great if you could help me out. thanks again regards
    Edited by: Ling Gao on Nov 10, 2008 9:11 PM

  • Create new  Business Partner in Loan Area

    Hi friends,
    I am facing the problem following:
    I can not create a new Business Partner (main Loan Partner) in Loan area.
    From Create new contract in Loan area, I create a new Business Partner (Organization) -> Result: Display screen is Create new contract
    I don't know why? I check in customizing but I can't find which step I missed.
    Please help me fix error
    Thanks and Best regards
    Ms. Minh

    Hi friends,
    it's done if create a Business Partner from T.code BP then assign to loan contract.
    But I want to fix error why I can't search and create a Business Partner from Loan Contract
    Thanks and Best regards
    Ms.Minh

  • Creating new business area from external database over dblink

    Hi all,
    I have the following configuration,
    ORCL - Database containing the EUL
    The EUL owner is BI_ADMIN.
    ADG - Database containing the objects and data
    There is a database link from ORCL to ADG using the username BI_ADMIN.
    Steps to recreate problem
    1. I connect to the EUL in ORCL
    2. click on the "Create a new Business area" button
    3. ensure that "on-line dictionary" is selected, then click on next.
    4. select the appropriate db_link from drop-down list.
    5. select user scott from list of users
    6. click on optionss button, and "tick" public tables option. Then click OK button.
    7. click next button
    8. click on user scott in available box.
    It is at this point that i have a problem, no objects in the scott schema are displayed for selection.
    If i create a new user in database ADG ,along with a new object in newly created schema and i follow the steps 1 - 9 detailed above, substituting scott with
    the new user i created, the object i created appears in the available box.
    I would appreciate it if anybody can tell me what i'm doing wrong.
    thanks
    Mel

    Hello
    I'm wondering whether you might have a schema in the local database with the same name as the one you are trying to pull from across the database link. You will need to do a little workaround to get around this if this is your scenario.
    I have a paper in my downloads area on my website: http://ascbi.com/downloads.htm that describes how to pull data definitions in across a database link. Take a look and let me know if this helps.
    Best wishes
    Michael

  • Can I copy MATERIAL adapter object and create new business object in R3AC1

    Hi experts,
    I need to copy MATERIAL adapter object and create a new business object R3AC1.
    Please let me know whether this is feasible.
    Thanks & Regards,
    Keya

    Usually  when there is a need to change/create an adapter object, I suggest to change object class to CUSTOMIZING in R3AC1. Then save it and call transaction R3AC3. There do necessary changes and afterwards switch back to original object class. There is no copy functionality for adapter objects. Kindly use transaction R3AC3 to create a new adapter object and maintain all tabs according to your requirements. When you are finished, kindly change the object class "CUSTOMIZING" to the original class name you're copying and the new adapter object will be visible in R3AC1.
    Documentation can be found in
       https://service.sap.com/ce    -> Early Product Training         > SAP CRM 4.0 & mySAP CRM Edition 2004 .. on the learning map, please choose "Development Consultant" -> Open "Enhance CRM Scenarios"
    Here you can find a lot of guides and SAP tutors on how to create an adapter object, example coding, and so on.
    To enable Filter Fields for an Adapter object make requisite changes in table SMOFFILFLD and generate the Adapter Object using SMOGGEN. CHeck table CRMPAROLTP in ECC to enable Filtering

Maybe you are looking for