Create a new Business Partner with LSMW
Hello,
We want to create a new BP using LSMW. We chose IDoc basic type CRMXIF_PARTNER_SAVE_M03. We want to create it with internal number assignment (we don't have BP ID or BP GUID). Unfortunatelly, when we leave PARTNER_NO and PARTNER_GUID fields empty, we get an error message that we should supply at least BP ID or BP GUID. So what values should we enter in order to create a BP with internal number assignment?
Thanks in advance,
Sergey Kozyrev
Hello Sam,
We don't want to enter any IDENTIFICATIONUMBER because we don't want to see it after in the identification table for the created BP that is presented in the user WebUI. We only want to create a BP with internal number assignment and have an ability to enter all BP data. If it is not possible with IDocs, maybe there is some FM that can perform it?
Thanks in advance,
Sergey
Similar Messages
-
How to create a new business partner for notification with function module?
Hello,
I got a problem when I want to create a new Notification with its businiss partner (BAPI_ALM_NOTIF_CREATE). I can't find the proper way to create the new business partner. Anyone offer some help?
Thanks a lot!
Morganwhen I look at the function you can transfer the partner in NOTIFPARTNR table.
You must already have defined the appropiate partnerroll in customizing for you're businesspartner
or do you have another problem with this function ? -
BP: How to hide "Validity Period" on screen Create a new Business Partner
Hi,
On screen Create a new Business Partner, I want to hide field Validity Period
-> Please tell me how to do in Customizing
Thanks and Best regards
Ms.MinhHi,
For each BP role, you can control the field status in configuration under BP-Role Settings. Please check whether validity period is available for field configuration or not.
Regards
Prasad AV -
How to create a Business Partner with internal number assignment
Hello,
We are using a CRM 7.0 system. We want to create a new Business Partner using LSMW. We chose IDoc basic type CRMXIF_PARTNER_SAVE_M03 to perform it. We want to create it with internal number assignment (we don't have BP ID or BP GUID). Unfortunatelly, when we leave PARTNER_NO and PARTNER_GUID fields empty, we get an error message that we should supply at least BP ID or BP GUID. So what values should we enter in order to create a BP with internal number assignment?
Please put attention that we also don't want to enter any alternative external number because we don't want the end user to see after in the WebUI.
Thanks in advance,
Sergey KozyrevHello,
Standard CRM PC UI application offers three options when you push 'New' button: 'Person', 'Organization' and 'Group' (combobox appears). In your case, 'Person' should be selected.
p.s. If you don't see combobox mentioned above, it could be security issue.
Kirill -
Create new Business Partner in Loan Area
Hi friends,
I am facing the problem following:
I can not create a new Business Partner (main Loan Partner) in Loan area.
From Create new contract in Loan area, I create a new Business Partner (Organization) -> Result: Display screen is Create new contract
I don't know why? I check in customizing but I can't find which step I missed.
Please help me fix error
Thanks and Best regards
Ms. MinhHi friends,
it's done if create a Business Partner from T.code BP then assign to loan contract.
But I want to fix error why I can't search and create a Business Partner from Loan Contract
Thanks and Best regards
Ms.Minh -
A business partner with this name already exists - message 3501-1
My client can't create a new account, the company is using a chart of account with segmentation. The message error is : "A business partner with this name already exists - choose a differetn name for the account. [Message 3501-1]"
We are using SAP 2007A PL42 with SQL 2005
Does somedbody have the same problem?Hi
Please answer couple of these question
Are you trying to create a new Business Partner Master Data ? Or Are you trying to create a new G/L Account in Finance module .
Have you had that business partner before and was deleted ?
Hope this will help to narrow down
Bishal -
Change default CardType on adding a new business partner
Hi everyone,
I have a simple question, but I can't find the answer on the internet.
I would like to change the default selected type on the form when I create a new business Partner.
At the moment when I am in "add mode" the comboBox type ( corresponding to CartType in DB) has the value "Customer" selected by default. I want to change that default value by "Lead". See attached image.
Is it possible to do that?
Thank you for your help!Hi,
Not possible to change default value.Please refer below:
Thanks & Regards,
Nagarajan -
How to create business partner with Role : "Loyalty Partner"
Hello,
During the creation of Loyalty Program, we can add loyalty partners which are Business Partners created with Role --> "Loyalty Partner". In standard package I could not see the the Role "Loyalty Partner"
For this role to be available during the creation of Business Partner, does any business functionality needs to be activated or should we create new role "Loyalty Partner" through BDT
Thanks
RamHi Vishal
Thanks for your explanation but I think it has not answered my question fully.
Yes, I do agree that only Loyalty Partners can be added in a Loyalty Program and those are Business Partners.
If you read through my question, I have asked how the system differentiates between Business Partners for example a sold to party and Loyalty Partner. In other words, which part of data in the Business Partner is the one which actually differentiates a Loyal Partner with other Business Partners. I think, just creating a Business Partner with Role --> Loyaly Partner will not serve our purpose.
The BP view is the same and the BP Role category does not contain my customization to differentiate this
Hope you understand what I am trying to say. Please let me know if you have any questions !!
Regards
Ram -
Create business partner with reference of another business partner
Hi all,
I want to create a business partner with reference of another BP in CRM 2007 from Web UI, please advise whether it is possible or not, if not ...why it is not possible?
Looking forward for your reply!
Regards,
Silpa.Hi Silpa,
In the standard, this isn't possible with the BP. However, you can create a customer as a reference of another existing customer, and then sync this new customer into a new BP. So you can do this indirectly,.
If you want to create a BP directy as a reference of another BP - sorry, this isn't possible. You would need to copy the BP into another BP using a custom report. You can develop your report along these lines :
1. The easiest way is to use APIs. Start by calling BUPA_CENTRAL_GET_DETAIL usign the BP number. THis will give you all the central data for the BP - e.g. name, etc. Now, merely feed the output of this module into the module BUPA_CREATE_FROM_DATA. This will create a new BP with the same data of the old BP.
2. Now that the main BP is ready, you need to start copying the individual datasets - addresses, bank details, roles, Id, industry,etc. This is tricky - the ADD apis - BUPA_ADDRESS_ADD, BUPA_ROLE_ADD, etc can only create one record in a call. So, you need to first get the data of the reference BP using the GET_DETAIL api e.g. : BUPA_ADDRESS_GET_DETAIL, then loop at each returned record, and pass that into the corresponding ADD BAPI.
3. Be sure to call BAPI_TRANSACTION_COMMIT at the end to commit the data to the DB.
I hope this helps you.
Cheers,
Rishu. -
How to Create Approval for New Business Partner Master Data
Hello Experts,
Is it possible for creation of an approval query such that while creation of New Business Partner:
if
a user forgets to add data in a field say TIN No. which is present in Tax Information,
then
the Business Partner Creation is withheld and sent for approval .
Can someone please help me with creation of such an approval procedure ?
Thanks and Regards,
Manish SalujaHello Manish...
Sorry to say there is no way to create an approval template on master data (BP, item, etc). However, we once had a similar problem and used the Alert Management to catch critical information that was missing during the creation process. Everyone had to enter a credit limit with no exceptions. I do not have the exact SQL in front of me, but it went something like this...
Very simple...
SELECT
T0.CardCode,
T0.CardName,
T0.CreditLine
FROM OCRD T0
WHERE
T0.CreditLine IS NULL
Then we set an Alert Message to go off every minute and sent it to the Accounting Department. Although it did not STOP them from adding the Business Partner, it sure did give someone the heads up to call the person who created it after looking at the Change Log. Sort of a compromise...maybe that helps you???
Take care - Zal -
Create business partner with role 'Internet User' via BP
Hi,
We want to create business partner with role 'BUP005 Internet User'
for purpose to link with created early user su01.
It's work via isauseradm application, Web UI.
Now I want to create new role 'BUP005 Interner user' via GUI. I started Tcode BP.
I filled USERNAME, password, roles. I tried to save BP.
I got this error:
Enter the Internet user
Message no. R11214
You have maintained attributes (logon data, roles and/or fixed values) for the Internet user, without having entered the Internet user itself.
But,
Field 'INTERNETUSER' is not changeble.
Denis.Hi, DJ
Thank you for answer)
1. Have you saved the BP. If Yes, just see if the INTERNET USER maintained is available in SU01.
Yes, but I can not see INTERNET USER in the BP.
2. If you are not able to assign the INTERNET USER, please try to maintain the INTERNET USER in BP.
I can not do it, because I can not change field INTERNET USER
3. If the INTERNET USER field is not available, just check the authorization for the same.
I has all authorization: sap_all.
Denis -
How to Create Business Partner with fix number in t-code :BP
Dear SIr,
Normally I will set number range for auto to create Business Partner. In case , If we would like to crea How to Create Business Partner with fix number in t-code :BP , howe to do?
Please kindly advise.
THnak you and best regards,
VimolDear Shobhit,
How to put the thread as you mentioned.
Best regards, -
I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
ThanksHi Ozy08,
Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
Thanks,
Preran -
Business Partner with ID GUID is not an employee - HR Replication
Hi All,
We are on SRM 5.0 Server 5.5. Our SRM Org structure comes from R/3. We did an initial replication and everything worked. I am now manually trying to replicate selected positions and persons, and this is not working properly.
The position and person comes across however in PPOSA_BBP the central person is not automatically linked to the position. When I run HRALXSYNC on the CP, I get an error "Business Partner with ID <GUID> is not an employee". I have checked the BP and it is an employee; in transaction PP01 there is an Org. assignment (0001) to the position and org unit. I have checked the IDOCs and the relationship A008 seems to be coming across.
Does anyone have any suggestions as to what else I can check?
Thanks,
Paula.Hi
<b>Please go through this -></b>
The CP object is a technical object and represents the natural person. The CP is not transferred in the scenario "SRM standalone with ALE integration of an HR system". This means that the CP in the HR system and the CP in SRM systems are different objects. The number of the CPs in the SRM system in this case is not significant, but when the CP is created, the system tries to assign the number of the first personal number (contract) to the object.
<b><u>See related SAP OSS Notes, which will definitely help -></u></b>
<b>Note 920185 - SRM 5.0: No CP<->BP consistence check in BBP_BP_OM_INTEGRATE</b>
<u>Note 763403 Assign existing (SU01) users to (ext.) employees</u>
<u>Note 875015 No attributes found for service agent</u>
<u>Note 309909 - R/3 HR connection: Link user / position</u>
Note 1046808 - Business partner validation
Note 934372 - SRM/CRM: HR integration for business partner - new features
<b>Also see this -></b>
During the business partner replication from purchasing systems to SUS, the following error occurs in an XI interface: "An exception has occured. E:R11: 124 - Business partner with GUID &1 does not exist"
Note 726212 - SRM40-SUS: Business partner - correction for SP00
<u>Related Notes</u>
Note 922181 - SRM-SUS: Mail notification not send from 'BBP_SUS_BP_ADM'
Note 849217 - SUS-MM: Vendor replication leads to error
Do let me know.
Regards
- Atul -
Creation of Business Partner with External BP #,ID type and Identifications
Hi Group,
I have a query on creation of Business Partner with External BP #,ID type and Identification # (along with the Firstname,Lastname,Email, Phone & etc.,) things.
the thing is that I was using a BAPI called "BAPI_BUPA_FS_CREATE_FROM_DATA", to create a BP and I was not able to have an option available for these things (External BP #,ID type and Identification # ) along with that BAPI.
So please kindly let me know how these things can be fetched from a BAPI which can accomodate all the above things mentioned.
Please kindly let me know how it can be achieved.
thanks in advance.
Regards,
Vishnu.Hi Gerhard,
Infact this reply was very useful, but ,while using the BAPI "BAPI_IDENTIFICATION_ADD" while creating the Id type and Id #s, this BAPI was not enabling this.
I was trying to use this BAPI to create ID #, and it's desc, but, this BAPI was returning like "This BP # does not exist" (in some cases) and in some other cases, it is keeping quiet without giving any indication as whether the things have been updated or not... and also when I checked, things were not getting reflected.
your help would be very much appreciated.
thanks & regards,
vishnu.
Maybe you are looking for
-
Installing Policy Agent gives Invalid empty password
Hello All I am gettting this error when installing AM 2.2. I want to configure the Policy Agent with IBM WAS 6 Copy agent.jar,amclientsdk.jar to /opt/IBM/WebSphere/AppServer/lib/ext...DONE. Creating directory layout and configuring AMAgent.properties
-
I've recently tried to make the switch to Firefox as we all know IE is unsafe and my computer was almost lost to a virus. However, it's been difficult as I can't log into my e-mail (after thirty seconds I get kicked back to the login page) and some s
-
Can't get rid of mactune pro software or notifications
I was mistaken in downloading mactune pro. I can't get rid of the notifications it keeps giving me , despite having trashed the software and deleted the download, including the desktop alias I created. I have searched my iMac and there appears to be
-
How to exclude a table when doing dbcc checkdb
when running dbcc checkdb(mydb). it will go through all tables. Is it possible to exclude a table from dbcc checkdb?
-
Slip the sync in a merged clip
Hello, I have tried to search everywhere, but couldn't find a answer. I have used Sync n Link to batch sync a feature film. Now i'm checking every take to see if it's really sync, and a lot of times it's 1 frame off. It would be great if you can chan