Creating a percentage data point

Hi,
I am trying to create a data point at the universe level that computes the achievement percentage of sales vs target. At the most granular level, the value is correct, but rolling up, it simply sums up the percentage instead of calculating the value. I am able to get the correct percentage if I define at the report level, but I am wondering if I can do this at the universe level so that it can be a re-usable data point for users.
Sample data:
Achievement = Sales/Target
Year     Quarter     Target     Sales     Achievement
2010     Q1             100        50          0.5
2010     Q2             200        175        0.875
If Achievement is defined at Universe-level, I get the below values:
Year     Target     Sales     Achievement
2010     300        225         1.375
When the correct value should be as below:
Year     Target     Sales     Achievement
2010     300        225         0.75

Hi Ednalynn,
You must have defined 'Achievement' object as a measure in the universe.
The measure is this scenario is non-additive; however, it seems like the default projection of this measure is set to Sum and therefore, the values are getting aggregating automatically when the grain is increasing.
Can you try using the projection as 'None' and check if it helps?
Regards,
Yuvraj

Similar Messages

MyFitnessPal creating multiple identical data points in Health app. Why?

I am using MyFitnessPal to sync with the Health app. I logged my breakfast this morning using myfitnesspal.com which syncs with the MyFitnessPal app. In many instances (carbohydrates, fat, protein, etc.) multiple data points were created with the exact same value (i.e. there were 6 data points saying 13g fat, adding up to 78g of fat so far today, which is wrong).
Has anyone else experienced this and what did you do to fix it?
I have an iPhone 5, using myfitnesspal.com and the MyFitnessPal app, which syncs to the Health app.

Same problem with the Garmin Connect app... In the Health app, there are 5 identical entries for number of steps every hour, so Health shows me with 5x the number of steps I've actually taken (according to the vivosmart and hence the Garmin Connect app). There are also multiple entries for active calories (although all showing being shared at 12:00am), also using Garmin Connect as the source... apparently, today I've exerted over 12,000 calories!
I've also got MyFitnessPal, and from what I can tell, it appears to be tracking correctly.

Data points not visible on xy chart

I am trying create an xy chart (a scatter plot) in staroffice (.sxc) using two sets of data:
Data 1:
-0.15
-0.1
0.04
0
-0.1
0.18
-0.05
0.08
0
Data 2:
5
50
80
70
80
80
50
90
80
After having selected my data, axis specifications, etc, when I click "create" , the chart is created, but no data points are visible. I have created another chart with different data where the data points are visible
I have not modified the axes scale.
The data points will display on any other type of chart except the scatter plot, which is the one I need. Has anybody experienced this problem/know how to deal with it?

Where, for example, the first point is (-0.15, 5) where -0.15 in Data 1 is equivalent to 5 in Data 2

Am I able to tag a data point of a spreadsheet that is being created by a datalogging VI such that at the end I have the data with multiple tags which corelate to events during a measurement cycle

Am I able to tag a data point of a spreadsheet that is being created by a datalogging VI such that at the end I have the data with multiple tags which corelate to events during a measurement cycle
My final need is to take data from a datalogging VI and store it in a spreadsheet with tags that corespond to events in a subVI which is controlling motor movement. This will allow users to view all data and mark the relevent data for analysis. As usual, user want everthing but with conditions.

Sure. What you do is take the numeric value acquired, the tags you want, and build them into an array. So now, when you write to the spreadsheet, you'll have a 2D array. One thing you have to keep in mind is that all elements of an array have to be of the same type. So if your tags are strings, you'll have to convert your numeric data into strings as well.

How can I create User Entered Additional Data Points in Credit Management?

I currently have a requirement to create additional data points in Credit Management (11i) that require a data analyst to input the value so that the score can be calculated.
For example: Does customer have a Qualified Audit Report?
If YES = +10 points added to score
If NO = 0 points added to score
I was able to add an additional data point and the case folder was assigned to an analyst, however when opening the case folder to input the missing data, the additional datapoint was not included in the case folder. Does anyone know what I may have missed in the setup?
Data Point was defined as follows and added to a checklist called TEST.
Data point: Unqualified
Category: (none)
Parent: (none)
Application: Receivables
Scoreable: Y
Enabled: Y
PL/SQL Package: (none)
Function: (none)
Thanks in advance.
Shauna
Edited by: sphelps on Sep 22, 2011 8:29 AM

The setup described above was correct. The datapoints did not show up in the case folder until the next day. I am assuming that maybe the changes required a bounce or a background process of some sort.

How to create Remainder email workflow in share point 2010 designer without creating the remainder date (calculated) column in the list

Hi,<o:p></o:p>
I have task to create remainder email notification 3 days before by comparing with End
date (my list item) so i created one calculated column in the list as remainder date by using that remainder date
i created, but my project manager told me create same remainder notification work flow without create that remainder date i tried to write calculation in work flow
but it is not working if any one knows how to do this please help me<o:p></o:p>
Thanking you,<o:p></o:p>
ArunDarly <o:p></o:p>

Hi,
For reminder type requirements, I tend to use the ‘Information Management Policy’ SPD method as described in
this blog article by Laura Rogers (it’s for MOSS and WSS but works in SP2010 also).
This method avoids the use of calculated columns; rather the workflow does the calculation and outputs information into a ‘reminder’ field. Also, I don’t like the idea of ‘paused workflows’, so this method works for me.
Cheers
Matt

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Plotting of graph with more than 4000 data points in Excel

Hi All,
I am fairly new to labview world. I am trying to plot out line graphs of the results from my program into Excel worksheet. I have huge set of data points(10000) stored in each of 10 different worksheets in MS Excel workbook. I am trying to compile results into last sheet as graphical representation of all the various dataset into 10 different graphs.
My problem is that I am getting error because MS Graph does not allow me to plot more than 4000 rows or datapoints. Is there better and cleaner way of programming this? Or if some one can provide an example of how to handle such case. I'll appreciate any help.
My goal is to able to plot one set of data 1st then I will be able to run through various worksheets to compile into standalone results.
ERROR MESSAGE: "Report Generation Toolkit: Graphs you create or edit in Microsoft Graph cannot contain more than 4,000 rows or columns, including row and column headers. "
Also for example if we run Line Graph example and change the # of data points from 100 to 4000, we get same message.
Error -41114 occurred at NI_ReportGenerationToolkit.lvlib:Excel_Insert_Chart.vi -> NI_Excel.lvclass:Excel Insert Graph.vi -> Line Graph (Excel).vi
Thanks,
Saurabh

Hi Dennis,
I am collecting waveform data from oscilloscope using labview in both data & graph format. So my program collects data for a particular operating condition & then saves the data on a worksheet. After it loads new operating condition & goes over same cycle. I have to save all the data points in excel for different use cases, which I am saving in different worksheet for each specific operating condition.
Since I already have data saved in excel at the end of test, I am trying plot each use case in the same report for study & presentaion after tests are finished. I have not been able to do so. I read the post which you have mentioned, seems like newer excel or labview version have same issue. I am using LV 9.0
I will try using decimation but if you have any better way of handling this problem, I'll appreciate if you can share that.
Thanks for your help.

Custom Map using latitude and longitude data points

Hi,
I am new to Apex and I want to lost custom data points using latitude and longitude data points. I
have seen posts referring to the chart example (http://apex.oracle.com/pls/apex/f?p=36648:65:2214483882702::NO:::) ; could someone help me with the following:
1) How to add On Demand Application Process to a map page (step 4 in the demo)
2) What is a hidden item and how to add it to a page (step 6)
Any help would be greatly appreciated.
Kind regards,
Lisa

I am trying to do the same thing. I have got the get_data function working to create the desired output. However when I replace the xml <data> block with &P65_DATA, it does not work. If I display P65_DATA on the page, it has correct output. If I cut and paste the output into custom XML, it works fine. Anyone have come across this issue..any ideas how to fix it?

New Effective CAL essay: How do I create an abstract data type in CAL?

How do I create an abstract data type in CAL? An abstract data type is one whose internal representation can be changed without needing to modify the source code of client modules that make use of that type. For software maintainability, it is a good idea to make a type that is subject to change or enhancement into an abstract data type. Another reason to create an abstract data type is to enforce invariants for values of the type that can only be ensured by using constructor functions (i.e. functions that return values of that type). In principle it is simple to create an abstract data type in CAL. For an algebraic data type, make the type constructor public and all data constructors private. For a foreign data type, make the type constructor public and the implementation scope private. If a scope qualifier is omitted, the scope is taken to be private. For example, the Map algebraic data type has the public type constructor Map and the data constructors Tip and Bin are each private, so it is an abstract data type. /** A map from keys (of type {@code k@}) to values (of type {@code a@}). */ data public Map k a = private Tip | private Bin size :: !Int key :: !k value :: a leftMap :: !(Map k a) rightMap :: !(Map k a); There are a number of invariants of this type: the size field represents the number of elements in the map represented by its Bin value. The keys in leftMap are all less than key, which in turn is less than all the keys in rightMap. In particular, non-empty Map values can only be created if the key parameter type is a member of the Ord type class. Values of the Map type can be created outside the Cal.Collections.Map module only by using constructor functions such as insert: insert :: Ord k => k -> a -> Map k a -> Map k a; public insert !key value !map = ... The owner of the Cal.Collections.Map module must ensure that all invariants of the Map type are satisfied, but if this is done, then it will automatically hold for clients using this function. Some examples of foreign abstract data types are Color, StringNoCase and RelativeDate: data foreign unsafe import jvm private "java.awt.Color" public Color; data foreign unsafe import jvm private "java.lang.String" public StringNoCase; data foreign unsafe import jvm private "int" public RelativeDate; The private implementation scope for Color means that a foreign function whose type involves Color can only be declared in the Cal.Graphics.Color module where the Color type is defined. A foreign function declaration involving the Color type relies on the compiler knowing that the Color type corresponds to java.awt.Color to resolve the corresponding Java entity i.e. it must know about the implementation of the Color type. Having a private implementation scope means that the Color type can be changed to correspond to a different Java class, or indeed to be an algebraic type, without the risk of breaking client code. In all these three cases there are useful, and different, design reasons to adopt a private implementation scope: For RelativeDate, the Java implementation type int represents a coded Gregorian date value in the date scheme used by Crystal Reports. Not all int values correspond to valid dates, and the algorithm to map an int to a year/month/day equivalent is fairly complicated, taking into account things like Gregorian calendar reform. Thus, it is desirable to hide the implementation of this type. For StringNoCase, the implementation is more straightforward as a java.lang.String. The reason to adopt a private implementation scope is to ensure that all functions involving StringNoCase preserve the semantics of StringNoCase as representing a case-insensitive string value. Otherwise it is very easy for clients to declare a function such as: foreign unsafe import jvm "method replace" replaceChar :: StringNoCase -> Char -> Char -> StringNoCase; which does not handle case-insensitivity correctly, but is a perfectly valid declaration. This declaration results in a compilation error when it is placed outside the module in which StringNoCase is defined because of the private implementation scope of StringNoCase. For Color, the issue is somewhat more subtle. The java.awt.Color implementation type is semantically the same as the CAL Color type. The problem is that java.awt.Color is mutable (since it can be sub-classed to create a mutable type). It is preferable for a first-class CAL type to not be mutable, so we simply make the implementation scope private to ensure that this will be the case. A somewhat less encapsulated kind of abstract data type can be created using friend modules and protected scope. For example, if an algebraic type is public, and all its data constructors are protected, then the data constructors can be accessed in the friend modules of the module in which the type is defined. Effectively this means that the implementation of the semantics of the type stretches over the module in which the type is defined, and all of its friend modules. These must all be checked if the implementation of the type is modified. Given the merits of abstract data types discussed above, it is perhaps surprising that most of the core types defined in the Prelude module are not abstract data types. For example: Boolean, Char, Int, Double, String, List, Maybe, Either, Ordering, JObject, JList, and all record and tuple types are non-abstract types. There are different reasons for this, depending on the particular type involved. For example, Boolean, List, Maybe, Either and Ordering are all rather canonical algebraic data types with a long history in functional languages, with many standard functions using them. They are thus guaranteed never to change. In addition, their values have no particular design invariants that need to be enforced via constructor functions. Exposing the data constructors gives clients some additional syntactic flexibility in using values of the type. For example, they can pattern match on the values using case expressions or let patterns. Essentially the same explanation holds for record and tuple types. Although non-tuple record types are less canonical, they do correspond to the fundamental notion of an anonymous named-field product type. The "anonymous" here simply means that the programmer can create an entirely new record type simply by creating a value; the type does not have to be declared anywhere prior to use. Char, Int, Double, String, JObject and JList are foreign types where in fact part of the semantics of the type is that we want clients to know that the type is a foreign type. For example, we want clients to know that Prelude.Int is essentially the Java primitive unboxed int type, and has all the semantics you would expect of the Java int type i.e. this is quite different from RelativeDate which is using int as its implementation type in a very tactical way that we may choose to change. One can think of a public foreign type declaration with public implementation scope as simply introducing the Java type into the CAL namespace. One interesting point here is with CAL's naming convention for public foreign types. We prefix a type name by "J" (for "Java") for foreign types with public implementation type such that the underlying Java type is mutable. This is intended as mnemonic that the type is not a pure functional type and thus some caution needs to be taken when using it. For example, Prelude.JObject has public Java implementation type java.lang.Object. In the case where the underlying Java type is not mutable, we do not use the prefix, since even though the type is foreign; it is basically a first class functional type and can be freely used without concern. For example, Prelude.String has public Java implementation type java.lang.String. In the case where the implementation type is private, then the fact that the type is a foreign type, whether mutable or not, is an implementation detail and we do not hint at that detail via the name. Thus Color.Color has as its private Java implementation type the mutable Java type java.awt.Color. When creating abstract data types it is important to not inadvertently supply public API functions that conflict with the desired public semantics of the type. For example, if the type is publicly a pure-functional (i.e. immutable) type such as Color, it is important not to expose functions that mutate the internal Java representation. A more subtle case of inadvertently exposing the implementation of a type can occur with derived instances. For example, deriving the Prelude.Outputable and Prelude.Inputable type classes on a foreign type, whose implementation type is a mutable Java reference type, allows the client to gain access to the underlying Java value and mutate it
(by calling Prelude.output, mutating, and then calling Prelude.input). The solution in this case is to not derive Inputable and Outputable instances, but rather to define a custom Inputable and Outputable instance that copies the underlying values.

Hi Pandra801,
When you create a the external content type, please try to add a filter based on your select statement.
http://arsalkhatri.wordpress.com/2012/01/07/external-list-with-bcs-search-filters-finders/
Or, try to create a stored procedure based on your select statement, then create ECT using the SQL stored procedure.
A step by step guide in designing BCS entities by using a SQL stored procedure
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/10/173-a-step-by-step-guide-in-designing-bcs-entities-by-using-a-sql-stored-procedure.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to delete the Data Points label with a crosstab layout

Hi, just a question.
I created a report which uses a crosstab layout; so...I have the Company Name on the left, Status Code above and the Count(tickets) as Data Points.
As soon as I put the Count(tickets) inside the report, the label "Data Points: Incident Id Count appears above just at the bottom of the Status Code
Is there a way to avoid this tedious label ?
As workaround, I changed the Data Points' format heading (text and background) in such a way to see only a Grey space...but this is not so useful (from the customer side...)
I also looked for inside the crosstab layout properties...but I didn't found nothing.....
Any help will be appreciate
Alex

Well, I think you are out of luck. You are basically saying you want to control when you have a column heading and when you don't want to have a column heading. Most of us users do want column headings in our reports. In fact I have a hard time trying to figure out why you don't want a column heading. How are the report users going to know what the numbers in the column mean if you don't have a heading on the column? Maybe the initial users of the report know, but what happens when they leave and someone else takes over their duties? I would suggest putting in an enhancement request for Discoverer to give you the option to not display a column heading, if you really want something like this. This needs to be at the workbook level, I am thinking.
John Dickey

Web Application Designer (Line Charts-Data Points)

Hi
I have to display the query in WEB as a Line Chart
The Query is on Cal Day Vs Mean Value
The user enter the Cal Day (From/To)..the Line chart is supposed to display mean Value on No of Cal Days users choosed.
In query created variable for Cal Day..but how can i define the Data Points for the chart in the Web designer.
Bydefault we have to specift no of data points we required..how can i change that to be based on the range user entered
Than ks

Hi Krishna,
When you define a chart, you define a number of series, but when you run the WAD, it takes the number of series it has the query.
Regards,
Diego

How can I label data points in a scatter chart with text strings?

Post Author: Bill B
CA Forum: Charts and Graphs
I need to create a Scatter Chart, with a text label for each data point instead of the xy coordinates. A legend will no longer be necessary.Also, I want to draw "cross-hair" lines on both the x and y axes centered on one particular data point.Any ideas?

Post Author: ebobo
CA Forum: Charts and Graphs
Hi
I have the same problem here, did you find any solutions.
Here we are ok if the dimension is displayed in the scatter instead of the measurements but the only options i founds was "Show data" and that option displays the values of the xy.
pls let me know if anybody found any solution for this problem

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
 Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
 If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

What Function Module can be used to create vendor master data in SAP R/3?

Hello -
I've been trying to find a standard SAP delivered BAPI that can be used to create vendor master records in ECC 6.0. Up to this point I have not been able to do so. With SAP MDM solutions and SRM solutions it seems logical that SAP would deliver a standard BAPI that can be used to create vendor master records in the ERP/R3 environment (similar to the BAPI_MATERIAL_SAVEREPLICA for creating material master data records).
I have been able to find BAPI_VENDOR_CREATE but this only calls the online transaction and does not offer much additional functionality beyond what transaction code XK02 already offers.
The next best alternative appears to be IDOC_INPUT_CREDITOR but our preference would be to not use IDOCs for the project we are working on.
Can anyone offer any insight or personal experience on how vendor master records have been successfully interfaced with SAP R/3? Did you have to use IDOCs or create a custom RFC call? Thanks for the help!
Rich Wortmann
<< Personal information removed >>
Edited by: Rob Burbank on May 14, 2009 10:43 AM

Quite a gap in the BAPI arsenal. I think the options are IDoc, which you don't want, good old program RFBIKR00 (requires flat file for input, can be used via LSMW) or DIY (very complex).
Thomas

Creating a percentage data point

Similar Messages

Maybe you are looking for