Creating a task with a PXI-2522

I am trying to create a task with a PXI-2522 module, this is a relay output module and I need to create a digital output task.Simply trying to create a digital output task with MAX, the PXI-2522 doesn't show up in the supported physical channel list? I've tried creating the task dynamically in LabVIEW and that doesn't work either. I must be missing something really obvious?
I am using LabVIEW 2013 f2 with DAQmx version 9.8.0f0

The PXI-2522 is considered to be in our Switch family of devices, not digital I/O. You can still program it using DAQmx though. Check out the example code that ships with DAQmx and see which VIs to use. You can access these examples by going to Help » Find Examples » Hardware Input and Output » DAQmx » Switches. From here you can select which example is most fitting for your application.
Nathan M.
Applications Engineer
National Instruments

Similar Messages

Unable to create a task with DAQmx: error -89136

Hello,
I am trying to create a task with DAQmx_CreateTask using C API on a PCIe 6535 device (using driver DAQmx 9.5.5 under Windows7), but I get the following error code: -89136 [DAQmxErrorRouteNotSupportedByHW_Routing], although this function works on another PC with XP.
The driver 9.5.5 seems to be correctly installed (MAX autotests on device work fine)
Thanks for help
amse

This is the french speaking part of the forum, maybe you'd get better luck to obtain a good answer in the general section.
To answer your question directly, I'd say check the options/parameters you're using because the error message clearly states that the way you're setting the physical channels / routing is not supported.
Never used the C API so I can't really help you more than this.
Hope this helps
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Create TRM task with resource element assigned

hi all.
I want create a TRM tasks with the resource element yet assigned.
There are some customize action or Add-in to do this???
Thanks a lot
Ismael

Hi,
Tasks automatically get created based on Transfer orders with the help of this BADI and program:
LTRM_RQST_GLOBL_SCAN. Look at example implementation class inside BADI definition.
After implementing this BADI.
Call this Function Module to create tasks automatically:
LTRQ_REQST_SCHDL or you can set up this program RLTRQSCHEDULER in background
For you to assign a task , use the following FM:
LTSK_TASK_ASSIGN
Hope this helps
Thanks
Vinod.
Edited by: Funko Technical on Jan 20, 2010 8:47 PM

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Using InfoPath form to create a task item in SharePoint 2013

Hi,
I have a requirement where I have to use InfoPath to create a task with attachments in a SharePoint 2013 List B.
I have to query a SharePoint Document Library A to display documents on the InfoPath form.
The user should be able to select the documents using checkboxes that he wants to attach to the task created.
When he clicks on the "Create Task" button, a task is created with the attachments in a SharePoint list B.
Also, the documents that are attached are then deleted from the SharePoint Library A.
Will the above require programming and does it have to be done on the SharePoint 2013 Server?
Thanks and regards,
Poonam

Hello,
I have already tried your solution, however in that case I get the error - "UncaughtSys.ArgumentNullException: Sys.ArgumentNullException:
Value cannot be null.Parameter name: context"...
Also, I tried removing SP.SOD.executeFunc
from my code, but no success :(
Kindly suggest !!!
Vipul Jain

Error Message: "Excel cannot complete this task with available resources" when creating pivot table with Excel 2013

Hi,
One of our users encountered this problem with Excel 2013 while creating pivot tables, particularly with large files. We tried to modify Virtual Memory
of the pc but error still persist. Why does this happen and how can we resolve this? Thanks.
Another error message encountered by the user, this time when opening large files. The files she tried to open are working fine in 2010. But when opened in 2013, it prompted : "There
isn't enough memory to complete this action. Try using less data or closing other applications."

Hi,
In regarding of the issue, please provide us more information to assist you better.
Did your user using the Excel 2013 and Excel 2010 with same PC? If not, please let me know the both of the 2 PCs' hardware list/Windows operation system info.
Did you using Excel 2013 32bit version and Excel 2010 64bit version?
General speaking, this issue usually occurs with Office 2013 32 bit version. It has a limitation of 2Gb of memory that can be used by its process. And the 64-bit Excel can handle larger workbooks.
Thus, if your user using 32bit Excel, I recommend try 64bit Excel instead.
Here is a similar issue, we also could try it:
http://answers.microsoft.com/en-us/office/forum/office_2007-excel/excel-cannot-complete-the-task-with-available/d31b1822-ebde-4c9b-8d11-e54bb652847d
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Problem when creating a Form with Launch Task Form Wizard

Hi all,
I'm using jdeveloper 11.1.1.6 over Windows 7 64bits for my BPM project.
I'm a new with BPM and i have a problem when trying to create a task's Form with the "Launch Task Form Wizard". I'm trying to create my Form based on a custom template, i already have imported the template as a library, now after i have selected the template i follow the wizard and i reach the wizard's rowX-columnX where i should choose the field i want in my form, but the problem is that i don't see any fields in that part of the wizard, the window is empty :(
I have created a business object based on a XSD, then i created a process data object based on the previous created business object and finally i used this data object as a parameter to the human task.
What could be my problem ?? :( :(
Regards
Carlos

I have also faced this issue few times. There could be a namespace issue / schema issue. Please check if you are able to see task:task in the schema section anywhere in the .task file you created. If that is not shown, the fields will not appear while creating human task form.
Thanks
Ashwini

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

Why does it take so long to clear a task (with DMA transfer) using the PXI bus?

I am migrating a system which used to use a PCI-6133 (8 channel simultaneous AI) and PCI-6733 (8 channel AO) to one that uses a PXI-6133 and PXI-6733 mounted in a PXI-1033 chassis.
In general, things seem to work (synchronized AI/AO running near the maximum rate on both devices), with the one exception that clearing an AO task on the PXI-6733 takes forever (on the order of 20-30 seconds).
Even when I try the sinewave generation for the PXI-6733 in the MAX test panel it takes the same amount of time to stop the task. If I switch to using interrupts as the transfer mechanism, it stops immediately.
I tried using the interrupt transfer mechanism on my more demanding set of synchronized tasks, but that does not produce the right behavior (even though it does not give any errors).
Is there any trick (or better diagnostic) to help get my tasks working with DMA under PXI that used to work fine on PCI?
Thanks in advance!
Solved!
Go to Solution.

Hi Patrick,
I'm using a PCIe-8361 controller. The computer is a Dell T5500 workstation running Windows 7 x64. I see the problem every single time I try to clear a task running on the PXI-6733, including my example using the Measurement & Automation test panel (from the very first time I try the Sinewave Generation onward). I can try other parameters in the test panel, but I don't need to adjust anything from the defaults (e.g., Rate = 1000) to get the behavior. I will also try installing the PXI chassis in a few other computers we have here just to confirm that it's not computer specific. From your line of questions I can at least gather that there's nothing obvious (like a known bug with the PXI-6733) and that I should expect this configuration to work.
Thanks for your help and I'll post any other findings I obtain.

Create Task with C# - App for SharePoint 2013

Hi everyone,
I need to create an app that can manage holiday for my company and we want to sync the demand Holiday with their tasks in Project Server 2013.
Unfortunatly, I cannot find how to add a task with an "App for SharePoint 2013" and in C#.
I've tried to add the task by entering an entry in the Project Server database but unfortunatly, it does not work.
Are there an other way to create task programmatically in Project Server 2013 ?
Thanks by advance,
Patmol

Hi,
According to your post, my understanding is that you want to use resource files in your SharePoint app project.
Here is an article for your reference:
http://msdn.microsoft.com/en-us/library/office/fp179919.aspx
Code sample: SharePoint 2013: Localize the app web, host web, and remote components of an app
http://code.msdn.microsoft.com/office/SharePoint-2013-Bookstore-328060fc/sourcecode?fileId=60464&pathId=1536365664
Best Regards
Dennis Guo
TechNet Community Support

World Traveller creates a task

I have been facing a problem in all FWs with World Traveller. Whenever I run it, it creates a task. How can I avoid this unwanted task creation?
Was this post helpful? If so, please click on the white "Kudos!" star to the left. Thank you!
Solved!
Go to Solution.

Thanks.
Was this post helpful? If so, please click on the white "Kudos!" star to the left. Thank you!

How to write to one channel of a task with multiple channels? (plus other things...)

So I have a USB-6009 DAQ. It has 12 digital output lines. I want one channel that is "Dev0\line0:10" which represents an address bus in my application. And a second channel "Dev0\line11" which represents a program enable line in my application.
I have tried creating two different tasks and adding one channel to one task and the other channel to the other task. The only task that worked was the task with "Dev0\line0:10". It was always the task containing that channel, regardless of the order of creation. So then I moved on to a different method. (I read somewhere that I should only create one task of each type. like only 1 DO task only 1 AO task etc... However I am also using the two analog ouputs to and have a task for each AO and they work just fine.)
I tried add both channels to one task. But when I needed to control only the address bus, I had to have some information for the other channel as well. This was a little trying, but I could configure it that way. But it turned out to be easier for me to just make one channel with all the lines and OR in the data for line11 with each write.
I just wondered if it was possible to write to one particular channel of a task and not the other channel? That would really be the ideal solution for me. especially if I could write multiple samples to the one channel while I left the other channel alone. Which brings up another complaint... Why does WriteMultiSamplePort only work if I use a DigitalMultiChannelWriter, and not if I use a DigitalSingleChannel writer even though my task only has one channel (and by the way I set up the channel as one channel for all lines)? A perplexing issue to be sure.
And no I can't just load all my samples into an array and write them all at once because I also have to manipulate the two analog outputs in between the various digital writes.
I am using NI DAQmx 7.5 and C#. I am trying to use the DAQ to program a digital switch, which has proven to be a real challenge. In push-pull mode there is too much ringing for the switches programming port to tolerate. But the switches interface is LVTTL, so I needed the 3.3V. When I changed to open-collector I had to use voltage dividers to drop down to 3.3V. But the rise time using open-collector is too slow for me the program the switch in serial mode, so I had to change to parallel. The switch has an 11 bit multi-plexed ADDR/DATA bus. So the DAQ I had chosen to use which had plenty of lines for the serial programming, now is strained to it's absolute limits by the parrallel interface. ARGH. The only output I am not currently using is the counter, and I'm going to need it if I ever want to read back from the switch. But first I have to seperate the ADDR/DATA bus from the CS line on the DIO lines of the DAQ. And I don't know for sure what I'm going to do about the voltage level translation when I have to go bi-directional. Maybe I can filter out the ringing in push-pull mode? Any thoughts on that?

Hi Saikey,
In most cases, you are exactly right: you can only use one task for one type of operation (i.e. only one analog input task in the same program). With the USB 6009, you can have multiple digital output tasks running at the same time. I was able to run a digital output program with two different digital output tasks configured for a USB-6009.
However, you stated that it would be better if you had everything in a single task for your application and write data to only some of the channels. The easiest way to do this is to modify your array of output data so that only the data to that one channel is changing. So, for example, if you keep writing a 0 to the channels that do not need new data nothing will change.
If you have to change your analog outputs during this program, you could create an event structure that would stop and restart the analog output tasks without changing the digital output data. I hope that you find this information helpful.
Regards,
Hal L.

Reboot before sysprep when I want to add an installation task with Office 2013

Hi all,
I want to buid a reference computer with a genuine Win7 wim file, correct drivers, uptodate patches, and usefull applications. So I use a “Build and Capture Task Sequence”. The new reference image captured, I can use it with WDS or a media
to any computers, using a second and different “Build and Capture Task Sequence.”
All things were right, I could add Acrobat Reader, Java and some others application, but it failed when I tried to add “Add Application Task” with Office 2013. I could import the software, I discovered the new panel to configure config.xml
and mychoice.msp, but when I run the Tasq sequence, when it begin to sysprep the OS, a few time before the capture, the computer reboots. Sysprep does not run, and the image is not captured.
I can add any software installation in the Tasq sequence but not one with Office 2013.
What do you think about this issue?

Hi,
Some pieces of advice, since I have managed to create a Windows 7 WIM file with Office 2013 embedded without any problems:
Build your reference image in a virtual machine, not on physical hardware, to prevent a gigantic driverstore with drivers for one or more models, and having to rebuild your image every single time you use a new model. This is not how MDT works, MDT works
hardware agnostic, since it inject's drivers of hardware for each model before the WIM file is applied to your target computer.
Do you really want to embed applications like Adobe Reader and Java in the image? They have a release every month. Do you want to (or is there room for) updating your image every single month? Put them in the deployment phase of your task sequence. This
way these applications are left out the WIM file, but are installed after the WIM file is applied to your system. Yes this takes a little bit more time when deploying a machine, but that's time you'll save on not managing your WIM file every single month
Check your
log files, make sure your machine is not Domain Joined, since that is the biggest mistake people make when sysprepping a machine. And check
Setuperr.log for any sysprep errors. Guaranteed it has noting to do with Office 2013
Good luck!
If this post is helpful please click "Mark for answer", thanks! Kind regards

Error while creating configurable task list

Dear Expert,
I am trying to create configurable task list for equipments and I want to use this task list for preventive maintenance cycle. In following steps I will tell you what i did in the process.
Step1:- Characteristic is created and different values are assigned to this.
Step2:- Class with class type 300 is created, characteristic is assigned to this class
Step3:- Equipments are created and class created in above steps is assigned to them and character values are set for them
Step4:- General maintenance task list created
Step5:- Configuration profile for task list with same class is created
now while creating the object assignment in the task list operation, in the dependency basic data I am getting error ' No source code entered'. Please guide me what data do I need to enter in this basic data and where I am doing wrong.
I try to follow the previous discussion regarding the same topic, but unable to create this object dependency assignment.
Thanx in advance, for your help.
Regards,
Parag

Hi Parag,
See this document.Configurable Tasklist
I hope you will be able to connect and correct your process accordingly.
Step3 here (CU01) is related to your issue.
You are expected to give a code shown like that in the Editor above Assignments in the Tasklist Extras menu (Takes to CU01)
Jogeswara Rao K

Error creating OIM schema with RCU 11.1.1.3.3 (RCU-6135)

Hello!
I'm trying to install Oracle Access & Identity Management 11g on Windows Server 2003 32bit machine
As main guide I use the article from onlineappsdba.com ( [this one|http://onlineappsdba.com/index.php/2010/08/05/oracleidm-11g-step-by-installation-of-oam-oim-oaam-oapm-oin-111130-part-i-load-schema/print/] )
I have installed Oracle Database 11.2.0.1.0
After that I try to create required schemas using RCU 11.1.1.3.3 and constantly get failed on creating OIM schema with error RCU-6135:Error while trying to execute Java action..
All other schemas were created successfully.
I've checked oim.log and there were no sql errors.
In the rcu.log I found next messages:
2011-04-08 17:19:28.921 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: Executing Task: Oracle Identity Manager
2011-04-08 17:19:28.921 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JavaAction::perform: JavaAction command=oracle.ias.version.SchemaVersionUtil:utilCreateRegistryEntry
2011-04-08 17:19:28.921 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JavaAction::perform: JavaAction method=utilCreateRegistryEntry
2011-04-08 17:19:28.921 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: Connecting to database: user:sys, role:SYSDBA, connectString:(description=(address=(host=sso)(protocol=tcp)(port=1521))(connect_data=(service_name=RED)(server=dedicated)))
2011-04-08 17:19:29.328 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: m_bean.getResetSession() = false
2011-04-08 17:19:29.328 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: m_bean.getConnectAsOwner() = false
2011-04-08 17:19:29.328 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: Connecting to database: user:sys, role:SYSDBA, connectString:(description=(address=(host=sso)(protocol=tcp)(port=1521))(connect_data=(service_name=RED)(server=dedicated)))
2011-04-08 17:19:29.343 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: current user=sys
2011-04-08 17:19:29.343 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: Performing JDBCScript Action Command: Z:\Oracle\fusion\3\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\/rcu/integration//oim/sql/oim_user.sql CMDLINE Parameters Length: 5
2011-04-08 17:19:29.343 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::parseNexecuteScript: ParseNexecute Script: Z:\Oracle\fusion\3\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\/rcu/integration//oim/sql/oim_user.sql
2011-04-08 17:19:29.625 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: **** Sql script DONE****
2011-04-08 17:19:29.625 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.AbstractCompTask::execute: ValidIf result was false. Skipping Action: Z:\Oracle\fusion\3\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\/rcu/integration//oim/sql/param.sql
2011-04-08 17:19:29.625 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.SQLPlusAction::perform: paramString = 'DEV2_OIM'
2011-04-08 17:19:35.796 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.SQLPlusAction::perform: **** Sql script DONE****
2011-04-08 17:19:35.828 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.SQLPlusAction::perform: paramString = 'DEV2_OIM' 'DEV2_OIM_LOB'
2011-04-08 17:19:35.828 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.SQLPlusAction::perform: m_bean.getResetSession() = false
2011-04-08 17:19:35.828 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.SQLPlusAction::perform: m_bean.getConnectAsOwner() = false
2011-04-08 17:20:30.796 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.SQLPlusAction::perform: **** Sql script DONE****
2011-04-08 17:20:30.796 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: m_bean.getResetSession() = false
2011-04-08 17:20:30.796 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: m_bean.getConnectAsOwner() = false
2011-04-08 17:20:30.796 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: current user=sys
2011-04-08 17:20:30.796 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: Performing JDBCScript Action Command: Z:\Oracle\fusion\3\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\/rcu/integration//oim/sql/update_oim_user.sql CMDLINE Parameters Length: 1
2011-04-08 17:20:30.796 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::parseNexecuteScript: ParseNexecute Script: Z:\Oracle\fusion\3\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\/rcu/integration//oim/sql/update_oim_user.sql
2011-04-08 17:20:30.812 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JDBCAction::perform: **** Sql script DONE****
2011-04-08 17:20:30.812 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JavaAction::perform: JavaAction command=Z:\Oracle\fusion\3\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\/rcu/integration//oim/iam_rcu_comp/lib/seedSchedulerData.jar:oracle.iam.scheduler.seed.SeedSchedulerData:loadSchedulerData
2011-04-08 17:20:30.812 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JavaAction::perform: jarPath=Z:\Oracle\fusion\3\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\/rcu/integration//oim/iam_rcu_comp/lib/seedSchedulerData.jar
2011-04-08 17:20:30.843 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.action.JavaAction::perform: JavaAction method=loadSchedulerData
2011-04-08 17:20:30.875 INCIDENT_ERROR rcu: oracle.sysman.assistants.rcu.backend.action.JavaAction::perform: Failed to execute method: Excepton:
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.sysman.assistants.rcu.backend.action.JavaAction.perform(JavaAction.java:328)
     at oracle.sysman.assistants.rcu.backend.task.AbstractCompTask.execute(AbstractCompTask.java:243)
     at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.NullPointerException
     at oracle.iam.scheduler.seed.SeedSchedulerData.startSeeding(SeedSchedulerData.java:516)
     at oracle.iam.scheduler.seed.SeedSchedulerData.loadSchedulerData(SeedSchedulerData.java:107)
     ... 8 more
2011-04-08 17:20:30.984 ERROR rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: RCU Operation Failed
oracle.sysman.assistants.common.task.TaskExecutionException: RCU-6135:Error while trying to execute Java action.
     at oracle.sysman.assistants.rcu.backend.task.AbstractCompTask.execute(AbstractCompTask.java:300)
     at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.sysman.assistants.common.task.ActionFailedException: RCU-6135:Error while trying to execute Java action.
     at oracle.sysman.assistants.rcu.backend.action.JavaAction.perform(JavaAction.java:350)
     at oracle.sysman.assistants.rcu.backend.task.AbstractCompTask.execute(AbstractCompTask.java:243)
     ... 2 more
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.sysman.assistants.rcu.backend.action.JavaAction.perform(JavaAction.java:328)
     ... 3 more
Caused by: java.lang.NullPointerException
     at oracle.iam.scheduler.seed.SeedSchedulerData.startSeeding(SeedSchedulerData.java:516)
     at oracle.iam.scheduler.seed.SeedSchedulerData.loadSchedulerData(SeedSchedulerData.java:107)
     ... 8 more
2011-04-08 17:20:30.984 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: Executing Task: Execute post create operations
2011-04-08 17:20:30.984 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.CustomCompManager::getActionList: CustomCompManager.getActionList: CUSTOM_COMP_POSTLOAD_CLEANUP
2011-04-08 17:20:30.984 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: Execution time for Execute post create operations : 0 milliseconds
2011-04-08 18:32:57.031 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUModel::executeTasks: Failed to write checkpoint at:Z:\Oracle\fusion\3\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\/rcu/log\RCUCheckpointObj
2011-04-08 18:32:57.031 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUModel::executeTasks: Writing checkpoint at:C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\\logdir.2011-04-08_17-13\RCUCheckpointObj
2011-04-08 18:32:57.046 NOTIFICATION rcu: oracle.sysman.assistants.rcu.ui.InteractiveRCUModel::showCompletionMessage: Repository Creation Utility: Create - Completion Summary
Database details:
Host Name               : sso
Port                    : 1521
Service Name               : RED
Connected As               : sys
Prefix for (prefixable) Schema Owners : DEV2
RCU Logfile               : C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\rcu.log
RCU Checkpoint Object               : C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\\logdir.2011-04-08_17-13\RCUCheckpointObj
Component schemas created:
Component               Status     Logfile
Metadata Services          Success     C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\mds.log
Audit Services          Success     C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\iau.log
Oracle Identity Manager          Failed     C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\oim.log
Oracle Access Manager          Success     C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\oam.log
Oracle Adaptive Access Manager          Success     C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\oaam.log
Oracle Adaptive Access Manager(Partition Support)          Success     C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\oaam_partn.log
Authorization Policy Manager          Success     C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\apm.log
SOA Infrastructure          Success     C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\soainfra.log
User Messaging Service          Success     C:\Documents and Settings\Administrator\Local Settings\Temp\1\logdir.2011-04-08_17-13\orasdpm.log
I've searched through the OTN and Internet but did not found any solution.
Please help me.
Any advises will be appreciated.

I've tried to run RCU 11.1.1.3.3 on Ubuntu 32-bit and OIM schema creation failed again but with another error RCU-1636 Failed to start PL/SQL engine.
After that I found RCU 11.1.1.4, downladed it and this version created all schemas successfully.
Hope all other components will be ok with new version of RCU

Creating a task with a PXI-2522

Similar Messages

Maybe you are looking for