Creating activity without referencing Account and Contact Person.

Hello Experts,
Our client has such a process, sales employee can perform unplanned visits and they record this visit just entering this prospectsu2019 telephone number and name surname.(without entering account ID as the customer data hasnu2019t been created yet in Sap CRM) They require this in SAP CRM as well.
I have been looking for a way how can we manage this. When I create a visit the system asks for Account ID and Contact Person ID. My question is that is it possible to create a visit in SAP CRM without indicating contact person and account.
Kind regads,
M.

Hello!
Every activity in CRM must have activity partner, but you can make this fields non mandatory in CRM - Master Data - Organizational Management - Organizational Data Determination - Change Rules and Profiles - Maintain Organizational Data Profile
Best regads,
Artur Litvinov.

Similar Messages

PCUI - Different Text type for Accounts and Contact Persons

Hi All,
While configuring the Text Determination, how can we have different determination procedures for Accounts and Contacts. On the CRM back end side there is no distinction on the objtect type for account & contacts. Instead there is one for BP.
We defined a Text Det Proc for Object BUT000 (Business Partners) which gives us the same text types in both accounts and contact person screens in PCUI. But we want different text types. Can any one please advise.
Thanks in advance,
Raj K

Hello All,
Any suggestions in this matter would be greatly appreciated. Thanks,
Raj Kasa

Account and contact person search in more Work Center pages

Hi All,
I have to face the following problem. Currently I am at customer and the customer wants to have four different work centers (broker, cedent, original insured). The work center pages should show the AB SEARCH. In those ABs the links Search Brokers, Search Broker Contacts; Serach Cedent, Search Cedent Contacts etc.)
I Use the Target IDs MD-BP-SR and MD-CONP-SR for all searches.
Everything went fine (I checked simultanously in WebUI). After I entered the third ORIGINAL INSURED the AB of all Work Center appeared the same. All had Cedent Accounts, Cedent Contact Person as links in the AB Create. When I make the Cedent links unvisible no Work Center has them in.
How can I solve this problem? I work on that since two days. Has anyone an idea? Even here in SDN I couldn´t find a solution for that.
The CRM is a brandnew one? Could it be that the search MD-BP-SR can only be used in one workcenter??
Thanks to all for your help,
Martin

Hi Pieter,
thx for your answer. AB=Assignment Block. This Search Block.
I would like to have 4 WC for Cedent, Broker, Original Insured an Prospect (XXX). These WC should have all an AB / Work Center Link Group that includes Search XXX Accounts and Search XXX Contacts. I have an developer here, that would add the role, so that we can search role specific (Roles: Broker Original Insured, Broker etc.). An better idea for that?
But my problem is, that the WC pages look all the same. Even if I go to WC Prospect, that should incl. the Work Center Linkgroup Create (Link will be Create Prospect) it doesn´t appear, because all work center pages look similar.
I entered all (LogLingID, WC Link Groups etc.) from scratch, but I compared with standard.
I would love to help, but it is not really clear to me what you are doing.
You mention you have 4 workcenters, all with an option to search for accounts and a search for contacts.
CORRECT.
How are you planning to differentiate between them all if you use the same target id's (MD-BP-SR and MD-CONP-SR)?
Is your issue that you changed the description of the links, and they appear the same?
You also mention 'AB'. What would that be?
Yes. The Links all have Search Cedent Accounts in every WC Link Group. But why?
Regards Martin
I would upload a screenshot or send it, but don´t know how...first time posting a thread.

Activation of BP and contact person

Hello Experts,
I want to know what is the procedure of activating the Business partner and contact person in IS-Media in ECC6.0. In ECC6, SAP has already given this facility so no need to execute any program but if I want to upgrade from 4.6c TO ECC6 then first we need to convert the customer to BP.
Please help me to know the procedure.
Thanks,
Shyam

If you want to use the business partner functionalityand migrate all your customers to business partners, you can not directly upgrade the system from 4.6C to ECC 6.
1. Upgrade SAP either to 4.7 or higher.
2. Goto t-code [JUPART] and execute all the reports one after another from top to bottom. These should be run only after completing the business partner configuration in SAP.
3. By running all the reports, the customers are migrated to business partners
4. Now upgrade the system to ECC 6.
Hope I am clear enough

FM to fill activity partner and Contact person inside a BADI

Hi,
When i create an activity i need to check for a condition and process the activity accordingly. The condition is that when an contact person is entered mistakenly on the activity partner field then i need to move to the contact person field and also find out the corresponding activity partner and fill it.
For example, if i enter 123( assuming this to be a contact person) on the activity partner field, then i need to find what is the corresponding activity partner for this contact person(Assuming ABC to be the activity partner). I need to fill ABC on the acitivity partner field and 123 on the contact person field. I tried using ORDER_SAVE Badi for the same. The badi gets called and i am able to read the curent value from ORDER_READ FM. I just don't get as to how to fill the activity partner and contact person inside this BADI. I am not able to find any FM for the same. Can i request some help pls?
Thanks,
Venkat

Hi,
maintain the partner change on document manually and debug this FM to see what should be the inputs.
Maybe you are missing sth.
Other way, better, would be using crmv_event tcode. there you can register your FM that will change partner on document.
you can assign this FM for eg. to event AFTER_CHANGE and object PARTNER, and transaction category like Service Process.
you can read /people/radoslaw.stefaniak/blog/2009/12/16/crmvevent--what-is-it for more information.
Regards

Email notfication for Customer and Contact person Created In CRM to the User

Hi All,
In one of my requirement, when a customer and Contact person is created in ECC or CRM a Mail should send to the user who created. There is
middleware setting between ECC and CRM. Mail Should trigger in CRM system only.
I know to trigger email for transaction data using Action Profile.
Could any One guide me to trigger email notification for Master data (Business Partner).
Thanks in Advance.
Regards
RR Pradhan

Good afternoon Pradhan
1.I think it would normally be done through a mini wf which should start on event "partner created".
Your wf should have another step with a custom method to determine the email address and feed it to a container. You would then use this container in a subsequent email step with recipient type "email address".
2.In the case of actions I think you should use as processing time the option : Processing using the Selection Report (Action Monitor) (tnx sppfp)
As processing type you should probably have a method that sends an email.
Most likely the recipient email address should be determined in the same method by reading the attribute BusinessPartnerERM.CreatedBy.
In the scheduling conditions you could use the standard attribute BusinessPartnerERM.CreatedOn, in a combination like BusinessPartnerERM.CreatedOn = Today () ;
Hope this helps.
Regards
Razvan Zainea

Search Help for employee and contact person

Dear expert,
I'm a BSP fresher. We are using CRM 7.0 now. I'm facing a BP search help pop-up window issue, please help on it.
We need a search help pop-up window to search employee and contact person at the same time.
Our user want to search both employee and cantact person (don't include custoemr ->sold-to-party) for activity responsible person. I know the sap standard search help components are different employee, contact person, account.
For example: employee -> BP_EMPL_SEARCH (component); contact person -> BP_CONT_SEARCH; account -> BP_ACC_SEARCH_E. And the component BP_HEAD_SEARCH is for all BP.
It seem that there is no search help component for employee and customer contact person combination. I think maybe we can do a filter by BP role. But I don't how to implement it on WebUI.
Thanks and Best Regards
Michelle

Hi Michelle,
You can create a search help using trx. SE11 and use it in the METHOD GET_V* of your componen/attribute.
in the get_v* method, * means attribute name put this custom code.
DATA:
w_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
t_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
t_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
w_map-context_attr = 'STRUCT.ZRESP_FASE'. " Attr name
w_map-f4_attr      = 'PARTNER'.                     "import/export parameter to search help - search help attr name
APPEND w_map TO: t_inmap, t_outmap.
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'PRP_BUPA_EMPLOYEE'   "search help name in your case Zname
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_input_mapping            = t_inmap
      iv_output_mapping           = t_outmap
      iv_trigger_submit           = abap_true.
Hope this helps!
Best regards,
Caíque Escaler

How to Create a New Admin Account and Change Original to Standard Account?

I have a single user admin account that I set up when I got my PowerBook. Now I want to have two accounts with the new one being the admin account. This way I can leave most of the data files, email accounts, etc. with the old account and use the new one for personal data and admininistration. Then I could give out the password for the original account without fear that a user could change permissions and get access to the new account with the personal data. Can I create a new admin account and then change the original account to "Standard" instead of "admin"? What problems will this create?
PowerBook G4 Mac OS X (10.3.9)

i2:
Not sure if you are asking if or how. Templeton has
answered if. Here's how.
Apple Menu > System Prefs > Accounts. Click on the +
under User Options to create new account. Go to
Security and check box at bottom to make account
admin. You can take care of the other items, picture
etc, login options etc.
To make the other account Standard select the
account, go to Security and deselect box "Allow User
to Administer".
Hope this answers your questions.
Good luck.
cornelius
PismoG4 550,
100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS
(10.4.4) Mac OS X (10.3.9) Beige G3 OS
8.6
Thanks, I'm tying to find out if I will run into problems, such as not being able to use the new admin account to change permissions in the old.

How can I create a new iCloud account and transfer my apps?

I'm sharing an iCloud and iTunes account and want to have my own. Can I create a new iCloud account and transfer my contact list? If I keep the existing iTunes account with the new iCloud acct, can I reload my apps without purchasing them again? I understand I can create a new iTunes acct afterwards.

OK, so you can create a separate Apple ID for yourself that you use for your Messages, iCloud, Mail, FaceTime, etc. and keep the one that you have your Apps on as your iTunes "Family" Account.
Before you set up your new Apple ID, be sure to delete your iCloud account from your device: Settings>iCloud, scroll to the bottom and delete the account. Save your Contacts on your phone so you can merge them with your new iCloud account. Your notes, and Photos will still be on your old iCloud account, but if you want to keep any of your photos on your new iCloud account, it would be a good idea to import all of your photos to your computer first, so you can selectively download them to your device. (Note: only your Photo Stream will go away when you delete your iCloud account. Your Camera Roll will stay in place. It's just a good idea to back up that Camera Roll to a computer or to your new iCloud account immediately once you have set it up.
You then would set up a brand new Apple ID for you under Manage your Apple ID: Apple - My Apple ID
Once you get it set up, go into your devices and sign off the following:
Settings>Messages>Send & Receive, click on your "Family" Apple ID and Sign Out
Settings>Facetime, click on your Apple ID and sign out
You will leave your "Familiy" Apple/iTunes ID signed on on the iTunes & App Store, becasuse you willl continue to share your iTunes account with the family. Here is a little more info about using two Apple IDs:
Using your Apple ID for Apple services
Once you have your new ID set up, go back into Messages and FaceTime and sign back in with your new ID
Also, go to Settings>iCloud and sign in with your new ID, and be sure to "Merge" your contacts into your new iCloud account.
Post back with any questions!
Cheers,
GB

I am trying to create a new itunes account and on the terms and conditions page the Agree button is permanently grey even when i have ticked the check box any ideas

On my Macbook Pro running Lion - trying to create a new ITunes account and the Agree button on the Terms and condition page will not come active even after checking the box any ideas

There isn't a way - at least not that I have found. I'm having an issue with this as well - seems like a shoddy sort of business practice. I refuse to enter my credit card number to download a FREE app. I'm encouraging the user community that has a problem with this to please post your opinion as well. I know this is a use community, but I have to think that Apple will take notice when an issue gets a lot of attention. Apple needs to hear your voice.

Marketing Attributes for account and Contact

Hi,
I am looking at Marketing Attributes of an Account. They are fine.
And I am looking at Marketing attributes of an Contact for this account. But these values are different from Account Marketing Attributes.
They are not same...can you please let me know..when they will bcome same (for Account and his contact).
And when I create lead(campaign)...will these attributes changes for Account and Contact?
Please let me know...as I am very new to CRM Marketing.
Thanks,
Sandeep

Hi,
If the marketing attribute set is created with assignment to bith Accounts and Contacts.. the same would be visible through out.
If u want different set of attributes for contacts and accounts, define multiple marketing attributes and select the checkbox for availability in either contacts or accounts and not both.

Mapping Error: INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY when attempting to Upsert from a Flat File source to SFDC Account and Contact target

I'm getting an INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY error when running a mapping that attempts to Upsert data from a Flat File to SFDC Account and Contacts. I also tried to split The error message for Account: WRITER_2_*_1> WRT_8164 [2015-07-26 08:49:57.707] Error loading into target [Account] : Error received from salesforce.com. Fields []. Status code [INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY]. Message [Please enter a value for Country].WRITER_2_*_1> CMN_1053 [2015-07-26 08:49:57.707] : Rowdata: ( RowType=1(update) Src Rowid=1 Targ Rowid=1 Upsert is based on the External ID: Account_External_ID__c The error message for Contact: WRITER_1_*_1> WRT_8164 [2015-07-26 08:49:55.305] Error loading into target [Contact] : Error received from salesforce.com. Fields []. Status code [INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY]. Message [Please enter a value for Country].WRITER_1_*_1> CMN_1053 [2015-07-26 08:49:55.305] : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1 Upsert is based on the External ID: Contact_External_ID__c Any ideas on how to proceed?

Hello,Can you please help me understand that limitations of the free data loader? In this link - http://www.informaticacloud.com/editions-integration.html# - I see the below features listed.No-code, wizard driven cloud integrationMulti-tenant SaaS solutionDatabase and file ConnectivityFlexible schedulingBulk API support (for Salesforce.com)Unlimited rows/day24 jobs/day1 Secure AgentLimited to 1 userCommunity supportCloud Data MaskingQuestions:When I view licenses in my free data loader, under Feature Licences, it shows the License type for Salesforce Connectivity/Bulk API as “Trial”. Can’t I create a scheduled Data Synch task to upsert records in Salesforce using Bulk API mode?Is the email notification option (for success, warning and failure of data synch task) available on the free version (and not as a trial)?I understand there is a limit of 24 jobs/day. But is there a limit on the number of scheduled data synch tasks that can be created?Data Masking is listed as a feature above for the free edition. However, when I view the licenses in my free data loader, Data Masking is shown as “Trial”. Can you please clarify this?Is there a limit on the number of Connections that can be created?ThanksSanjay

Replicate Vendor and Contact Person from SRM to ECC

Hi Expert,
I'm using SRM 7.0 and ECC 6.0 and using extended classic scenario.
any required to replicate vendor master and contact person from SRM to ECC, when we create vendor and contact person in portal, the result should display in SRM and ECC.
My question, Is it possible to replicate vendor and contact person from SRM to ECC? If possible, can you guide me?
Thanks and Regards,

Hi,
sorry..
this problem solved because our client change the business process.
we open screen ECC in portal SRM.
Thanks...

Refreshing CRM's Account and Contact list with new data

Hi Folks, I am very new to CRM and was tasked with a new job of refreshing our CRM's account and contact listing.
We get a new list in Excel every now or so from a commercial vendor that compiles list of companies and key contacts and sends it out to subscribers.
I cleaned out this Excel data so there is a:
1) Contact List
2) Account List
3) Contact + Account
that can be directly mapped to fields in CRM.
What I need to do is, make sure none of our existing data is deleted. If there is a matching account (eg. company A) then only the phone no, address, website will be updated. If there is a matching contact again do the same.
If there is no matching account in CRM, then create new account and all corresponding contacts.
Anyone done something similar, can you please suggest the optimal way to go around this? Thank.

Hi
When you do an import in On demand , you can select the appropriate choice in the Step 1 of your import wizard.
you can select to import the account with the on demand predefined fields where in you can import via account and location.
In case when duplicate is found you can opt for a overwrite of existing records and when no duplicate is found then you can ask for a new record creation.
the same way you can do for contacts.
By this method you can be sure that records are not lost and new records are created if there is no existing record.\
hope this helps.
-MR

How do I create a new user account and migrate my data to it?

I have problem with Adobe Bridge crashing when I exit Camera Raw. I was advised by my local apple service store to create a new user account and test Bridge using the new account. It works fine. So what do I do now? I don't know what in my account is causing the conflict but assume that the solution might be e newly setup user.

Checking the behaviour in another user account is a TEST, not a solution! You don't need to move everything over. Otherwise, every time you get a user account problem, you'll keep moving to a new user account again and again.
If the problem does not occur in a new user account, then the cause is something IN your user account. This is usually a Preference file. Adobe Bridge seems to crash a lot, and it can usually be fixed by deleting the Bridge folder in <user>/Library/Application Support/Adobe/
You can also try deleting the Bridge preference file, which will be in <user>/Library/Preferences, and called com.adobe.bridge5.plist (or similar).
If that doesn't work, you can test removing a whole bunch of the various Adobe files in those folders. You can always put them back if they don't change anything. And you've got a backup, haven't you? ;-)

Creating activity without referencing Account and Contact Person.

Similar Messages

Maybe you are looking for