Creating Binding Between ADf input LOV and ViewObject at runtime

I am creating binding at runtime between ADf input LOV and with attribute of ViewObject. When we create this binding at design time, following entry is added in pagedef of page:
<listOfValues StaticList="false" IterBinding="UdfVO1Iterator"
Uses="LOV_Udf1" id="Udf1"/>
I am creating this binding at runtime instead of design time by creating JUCtrlListBinding object by following code:
JUCtrlListBinding vb = new JUCtrlListBinding(rit2,ib,new String[]{"Udf1"},JUCtrlListBinding.LIST_OPER_SET_ATTRIBUTE);
vb.setName("Udf1");
where rit2 is RichInputListOfValue control, ib is iterator binding. but i am not finding any way to set "LOV_Udf1" which is name of LOV_Udf1. Kindly help me

Kindly some one help me

Similar Messages

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

ADF input LOV

ADF input LOV by default validates the value entered by user against LOV. If value is invalid, it gives error to user. I want to configure it to not show any error because i want to allow user to enter any data whether it is in LOV or not. How i can achieve that functionality?

Hi
I have adf table and one of the column is consumption LOV. I have been make the field immediate = true and also I have make method in ValueChangeListener
public void lovValidate(ValueChangeEvent valueChangeEvent) {
valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
FacesContext.getCurrentInstance().renderResponse();
But that can not work by well. I want, the user can enter the other value that not include in lov.
Can any help me to solve the problem?
Thanks.

What different between ADF Rich Portlet and Trinidad HTML Portlet?

Hi all,
I've some question about adding portlet to portal pages
What different between ADF Rich Portlet and Trinidaf HTML Portlet?
And benifit of each?
Regards

Hi all,
I've some question about adding portlet to portal pages
What different between ADF Rich Portlet and Trinidaf HTML Portlet?
And benifit of each?
Regards

Difference between batch input method and batch input recording in LSMW?

hi,
plz tell me the difference between batch input method and batch input recording in LSMW?
thanks & regards
Ruban

Hi Ruban,
The main difference between the two is in lsmw we can view the code status at any time just by coming to prvious steps, but whereas in batch input method unless the recording is finished we cant view the code.
second diff is tht we need to do lot of coding in batch inptu whereas here in lsmw we need not do much coding and mapping to data.
third diff is that batch input is both inbound and outbound where as lsmw is only inbound.
hope u got the differences.....
Regards,
sana M...

Difference between batch input method and direct input method in LSMW.

Hi all,
what is difference between batch input method and direct input method in LSMW. are they same?if differences are there tell me with details?

Hi,
Here are few differences bw Batch Input and Direct Inputs methods.
Batch Input: Uses classical BDC approach, but doesn't required an ABAP program to be written to format the BDC DATA. The user has to format the data using predefined structures and store it in a flat file. Yet it is a slower updation method.
Direct Input: Works similar to Batch Input programs. The difference is, instead of processing screens they validate fields and directly load the data into tables using standard function modules. Much faster and suits for large volume of data.
Thanks.
DhanaLakshmi M S

ADF UIX LOV and JBO-33035

I'm working on a UIX form which is based on a view, ViewA, which is built up from two entities - e.g. EntA and EntB. Between the entities there is a relation EntA is the child and EntB is the parent. In the view definition EntA is updateable and EntB is not updateable but referenced. ViewA contains all of the fields from EntA (including the foreign key) and Name field from EntB. I also created ViewB which is based on EntB.
ViewA now has the following fields:
AId (based on EmpA.Id, updateable)
AField (based on EmbA.Field, updateable)
A_B_Fk (based on EmbA.B_Fk, which is the fk. between EmpA and Emp B, updateable)
BName (based on EmbB.Name, not updateable because of it is part of the referenced, but not updateable EntB)
I put the views into an application module.
After that I made a UIX input form based on ViewA. In this form the I displayed only the AField and BName fields. The latter is a messageLovInput node. Because ViewA.BName is a not updateable field I do not use 'model' attibute, I fill the text and prompt attribute with EL expressions instead. When the user presses the LOV button the LOV window appears. There in the 'onSelect' event I set ViewA.A_B_Fk as I saw in the 'ADF_UIX_ListOfValues' sample. Everything seams to work, the referenced EntB is properly filled according to the new value of ViewA.A_B_Fk, but I got JBO-33035: the currency has changed, the expected Key is ...
I would like to know how should I implement a LOV in a case like this?
It's very important for me to get through this problem, because I must solve several similar case and the closing date is so near.
Any help appreciated,
Gábor

Ryan,
Thanks, I've read it and I did my LOV based on that.
But:
In that article the LOV field (department id) was just a simple attribute of the EmployeesView and if you had changed dept. id then nothing else would have changed in EmployeesView. In my example if you changed ViewA.A_B_Fk then ViewA.BName would change!
The problem could be the following (Suppose thet the ViewA edit form is in EditViewA.uix, and the LOV page is LOV.uix):
If you change ViewA.A_B_Fk in LOV.uix (as we can see in the examle you mentioned) BC4J selects the appropriate EntB and fills ViewA.BName properly. After that EditViewA.uix is refreshed and prepareMethod called. It notifies that the referenced entity is not the same as before and it throws the exception (I don't know why).
I made a workaround: in LOV.uix I put the selected value into a session variable and I use this value in the lovUpdate event of EditViewA.uix. It seems it works but it could be nicer.
What do you think about this?
Gábor

Creating links between 3D model parts and Excel BOM

I have quickly looked at Acrobat3D, but don't know much about Adobe products.
Unfortunately we are using Solidworks 2006 files, which 3D doesn't seem to support. Let alone when 2007 comes out.
Anyway, I was hoping to make a "Parts Book" for our machinery,
where I could somehow 'LINK' individual items from the 3D model - directly to Part Numbers from an Excel Bill of Materials.
I.e. clicking on the model item would highlight the Part number, and vice versa.
Any ideas if this is possible? Any help is much appreciated.

Thanks for the reponse.
I've only used the Tryout version (7.0.7) as the company I work for won't purchase Acrobat 3D - unless I can prove it will save time.
Unfortunately, from what i've tried, the Model Tree is such that the Model only shows the part Description.
From a 'Spare Parts' sales point of view - I need to link the model part to a separate Table that shows 'much more information'.
I.e. Part Number, Description, Quantity, Version, etc.
Hence, the need to link between parts within the 3D model & a separate Bill of Materials from Excel.

What is the difference between ADF Security Auth and J2EE Container Auth

Hello:
is there a simple doc that explains the difference between the two. Is it something to do with setup?

Re: Security, Thanks Frank, a question on your example

How to link bindvariable with ViewAccessor to make it ADF Input with LOV

I have create a view object by sql query in which i have two bind variables. I want to create a search form by these two bind variables as search criteria so i drag "Execute with Params" operation from Viewobject Data Control to a jspx page as a ADF Search Form. Now i want to create these two parameters as a ADF Input LOV so i changed control type in view Object for these two bind variables but i am not able to fine how to attach viewaccessor with it for data source. Kindly help me.

Hi,
in this case - if th ebind variables are not based on an attribute that has a LOV defined - you replace the components in the input form. To do this, remove the input text field and drag the attribute (the argument) onto the form again. Choose select one choice to create a drop down and then map it to the VO that providesthe values. Note that this doesn't create a LOV binding so you use lists for this.
Frank

How to create RFC Destination Between ECC 6.0 and BI 7.0

HI,
My name is balu working in gucons,i was trying to create RFC between ECC 6.0 and BI 7.0,i have tried with the help of some documents but iam unable to do that,Iam very helpfull if you give a clear description regarding this problem.
Thank you,
Regards,
BALU.

Hi Balu
the error screen is from your BI system? If yes, then why the source system is showing to be of type BI? For ECC it should be of type r/3.
You can try to delete already created RFC from both your BI and ECC system and try to create source system connection from your BI end from RSA1>> Source System> right click..Create..
Choose "Automatically Create SAP system" . Enter the required credential then click on "Replicate as well"
If you do not want to delete any RFC for any reason please upload entries from RSBASIDOC, RSLOGSYST table.

Can anyone Explain me the difference between Batch Input, Direct input met

Can anyone Explain me the difference between Batch Input Method and Direct Input Method.

hi
good
Direct input method                     Batch Input Method
1) We cannot send the fields   | 1) We can send fields as per
   according to our requirement|    requirement.
2) validations are done based
2) validations are done based
   on pre-defined function
on applications.
   modules
Batch Input Session:
- It is a sequence of transactions, which is generated when user run a particular program.
- It contains the accounting documents that are to be created. The SAP system stores these transactions until you decide to process them online.
- It does not update transaction figures until the session has been processed. Using this technique, you can transfer large amounts of data to the SAP system in a short time.
Three processing modes of executing Batch Input Session :-
(1) Run Visibly : You can correct faulty transactions online & work step-by-step through the transactions not yet executed.
(2) Display Errors only : You can correct faulty transactions online.   Transactions not yet executed, but without error, run in the background.
(3) Run in Background : Recommended by SAP.
thanks
mrutyun^

BUG ? : ADF creating extra VO instance using bind variables in a LOV query

ADF 11.1.1.1.0
After "playing around" with bind variables Setting bind variables in view objects for LOV I've come across something strange that I've reproduce using the HR schema and tables Employees and Departments. Its a bit long but here goes :
Using the HR schema tables departments and employeesI'm trying to create a LOV (selectOneChoice) for the
employee department, the LOV having a bind variable that limits the values returned in this case returning only DepartmentId = 50
I've create a VO lovDepartment (not based on an EO) with the following query :
SELECT Departments.DEPARTMENT_ID,
       Departments.DEPARTMENT_NAME,
       Departments.MANAGER_ID,
       Departments.LOCATION_ID
FROM DEPARTMENTS Departments
where DEPARTMENT_ID = :pDeptIdA LOV has been defined on the DepartmentId attribute of the EmployeesView.
The lovDepartmentImpl overrides the executeQueryForCollection to set the bind variable value.
    @Override
    protected void executeQueryForCollection(Object object, Object[] object2,
                                             int i) {
        setNamedWhereClauseParam("pDeptId", "50");
        super.executeQueryForCollection(object, object2, i);
    }When using an ADF form to create a new employee the DepartmentId lov is empty.
Enabling SQL tracing shows the following :
[370] _LOCAL_VIEW_USAGE_model_EmployeesView_lovDepartment1_0 ViewRowSetImpl.doSetWhereClause(-1, pDeptId, null)
[371] _LOCAL_VIEW_USAGE_model_EmployeesView_lovDepartment1_0 ViewRowSetImpl.execute caused params to be "un"changed
[372] Column count: 4
[373] _LOCAL_VIEW_USAGE_model_EmployeesView_lovDepartment1_0 ViewRowSetImpl.doSetWhereClause(-1, pDeptId, null)
[374] _LOCAL_VIEW_USAGE_model_EmployeesView_lovDepartment1 ViewRowSetImpl.setNamedWhereClauseParam(pDeptId, 50)
[375] ViewObject: _LOCAL_VIEW_USAGE_model_EmployeesView_lovDepartment1 Created new QUERY statement
[376] _LOCAL_VIEW_USAGE_model_EmployeesView_lovDepartment1>#q computed SQLStmtBufLen: 235, actual=195, storing=225
[377] SELECT Departments.DEPARTMENT_ID,
       Departments.DEPARTMENT_NAME,
       Departments.MANAGER_ID,
       Departments.LOCATION_ID
FROM DEPARTMENTS Departments
where DEPARTMENT_ID = :pDeptId
[378] Bind params for ViewObject: _LOCAL_VIEW_USAGE_model_EmployeesView_lovDepartment1
[379] For RowSet : _LOCAL_VIEW_USAGE_model_EmployeesView_lovDepartment1_0
[380] Binding null of type 12 for "pDeptId"
[381] No Resource Bundle found but null value id:LOV_DepartmentId_LOVUIHints_NullValueId is defined in an ListBinding Definition.It would seem that 2 lovDepartment instances are used one at line 370 LOCALVIEW_USAGE_model_EmployeesView_lovDepartment1_0
and one at line 374 LOCALVIEW_USAGE_model_EmployeesView_lovDepartment1
The one at line 374 LOCALVIEW_USAGE_model_EmployeesView_lovDepartment1 gets the variable bound at line 374
however LOCALVIEW_USAGE_model_EmployeesView_lovDepartment1_0 gets a null value and would explain the empty LOV
Can anybody explain what is happening here ? (and how to use bind variables in LOV queries)
Regards
Paul
(bump)
Edited by: Paul (MITsa) on Jul 14, 2009 10:46 AM
I've now tried all types of LOV from ChoiceList to Radio groupe by testing the application module - none of them work.....
Edited by: Paul (MITsa) on 14-Jul-2009 22:52

when you rinvoke executeQueryForCollection the bind variables are allready set and they exist in Object[] object2 method parameters.
in order to change them you need something like:
private void changeGenericBindVariable(Object[] params, String paramName, Object paramValue) {
for (int i = 0; i < params.length; i++) {
if (paramName.equals(((Object[])params)[0].toString()))
((Object[])params[i])[1] = paramValue;
* executeQueryForCollection - overridden for custom java data source support.
protected void executeQueryForCollection(Object qc, Object[] params,
int noUserParams) {
changeGenericBindVariable(params, "pDeptId", "50")
super.executeQueryForCollection(object, object2, i);
But its better to set bind variables before you executeQueryForCollection. like when you invoke LOV.
For cascading LOVs and the problems i have check:
[http://adfbugs.blogspot.com/2009/07/jdeveloper-11-r1-cascading-lov-bugs.html]

ADF BC LOV: creating a new LOV entry in-the-fly

Hi all
I have LOV enabled ViewObject attribute, which is actually a foreign key to the another, master table, as usual.
Now, user searches LOV values, and decides that he need a new entry in the master table, which should to be assigned to the LOV enabled attribute.
So, as part of creating current (detail) record (in the same transaction), I need to provide ability to create a new master record (in the af:popup for example), whose primary key after that automatically becomes value of LOV enabled attribute (and appears in the LOV, after clicking oh the search icon)
Both detail ViewObject and master ViewObject are part of the same Application module
How to do that ? Any example ?

Thanks for the reply. I am running jDeveloper 11g Version 2.
I tried the Bind Variable approach as well. I would love to use the code mentioned above, but where would I put it? Where can you put code that gets called before the page is generated?
I tried using the task flow to set the Bind variable between the createInsert and the page view. The method to set the bind variable was never called. I generated the necessary java code for the setter on the view object (and client interface) and placed a debug break point in the setter method just to make sure.

ADF -how to create table binding when view object is no known until runtime

I want to programmatically create a table binding to a view object where the view object name is not known until run-time. Then I will use a dynamic table to display it. Can anyone provide an example?

I looked at example #9. It gets me closer to what I am looking for but not quite enough. In my case, I don't have (or want in this case) a pageDefinition with a pre-declared Iterator binding. I am converting an exsisting BC4J/Struts/JSP application. I would like to rewrite my reusable component tags to make use of ADF bindings and Faces. My tags are passed the ApplicationModule and ViewObject names as parameters, much like the old BC4J datatags. I do not want to go back and rewrite all of my pages from scratch using drag-and-drop declarative bindings with a pageDefinition for every page. I am hoping to have my rewritten tags handle everything programmatically based only on the ViewObject name passed at run-time.

Creating Binding Between ADf input LOV and ViewObject at runtime

Similar Messages

Maybe you are looking for