Creating custom command link rather than command button
Hi
I have a custom component which I extended from UICommand. I am trying to show it as a link but it shows up as a button. I know that both command_link as well as command_button are UICommand components... How do I make my custom component show up as a link rather than a button?
Thanks
Hi
I have a custom component which I extended from
UICommand. I am trying to show it as a link but it
shows up as a button. I know that both command_link as
well as command_button are UICommand components... How
do I make my custom component show up as a link rather
than a button?
ThanksThe renderer actually used is based on the value returned by getRendererType(). If you are subclassing UICommand but not overriding this (or setting it in some other way), you're going to find that the default renderer type for a UICommand is "Button". You'll want to change it (to "Link" in this case) to select the hyperlink rendering.
Craig
Similar Messages
-
CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!
Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8 -
Every time I save a draft it creates a new draft rather than updating thr dradt I am working on
While writing an E-Mail I may receive a call so I need to save the E-Mail. I click save and it creates a draft which is fine. I go back to add to the draft and must save again and it creates a new draft. Every time I save it creates a new draft rather than updating the old draft as it does on my other computer
Chris, my guess is you may be confused by one or more tilde files inside the project, a project file with a tilde (~) in its name.
If the project was begun in iMovie 4, the project resides in an iMovie 4 type-folder, not an iMovie 6 package. The folder lets you see the tilde file. For projects begun in iMovie 5 or 6, the project is a package instead of a folder. And you never see the tilde file, for the package looks like a file instead of a folder.
The problem is discussed here:
http://discussions.apple.com/thread.jspa?messageID=1971832�
My guess is you're opening the wrong project file to re-open the project. So when you save, it's saving a new tilde file.
The whole issue is rather confusing. Check out the topic, and if you can't get it straightened out say more about what's going on there.
Karl
PS: If you haven't yet, create a new iMovie 6 project, add something to it and save. To look inside the package, Control-click on the project (in the Finder) and choose "Show Package Contents" from the popUp menu. You will see one tilde project file and one project file without a tilde. That's ALL the project files you should ever see. -
Create Custom InDesign Links inside CSAW like in ExtendedLink
Hi
I am wondering if it is possible to create custom InDesign links like in the InDesign SDK's ExtendedLink plugin inside a Flash Extension using CS InDesign SDK (csaw_indesign.swc) ?
Looking at the CSAW documentation I can only obtain Link information but not create a link let alone to create a custom one because of the missing LinkResource.
Cheers - Andy SchaeferHi --
I'm using iTunes 11.0.4 on OSX 10.8.4 and am having a hard time following your instructions to create a ringtone from a snippet of a .mp3 file using iTunes:
1) Select a favourite song in iTunes program to be made into Ringtone... CHECK!
2) "Get Info" on that song name and make any 0:30 seconds portion of that song.... CHECK !
3) Right-click or Ctrl-Click again on same song name and select "Create AAC Version" to create an .m4a file... PROBLEM!
It's when I hit Step 3 that I have a problem -- my "right click menu" at that point looks like this:
There's no option to "create AAC version." Nor does this option appear anywhere in iTunes that I can find.
It really shouldn't be this confusing to create a freaking ringtone. HELP PLEASE! -
Do we need any precautions while creating index in MV rather than tables?
Do we need any precautions while creating index in MV rather than tables?
Could you please someone tell me is there we need specifically follows while creation on MVsMV is a seprate object. You might need to create an indexes on MViews based on how you are accessing that MV. You need to take a same preacutions what you take to create an index on the table,
I do not know what you mean by your 2nd questions. Read this for better understanding
http://docs.oracle.com/cd/B28359_01/server.111/b28326/repmview.htm -
Creating Custom Page Size less than one inch
I currently have Acrobat 6 on Windows XP, and it appears that I cannot set a custom page size less than one inch (Using Printer Preferences). Is there another method I can use to create a PDF from Publisher that has a page size less than one inch? If not, would updating to Acrobat 9 allow me to print to a custom page size of less than one inch?
Thanks Peggy,
I tried deleting the preference file and restarting Pages but I still have the same problem with the custom page size. When I start Pages I am presented with a bunch of templates so I choose Blank then I go through my procedure to select the custom page size that I created and always end up back at an A4 document.
I have used the demo version of Stone Create to do what I needed to do with the small page size (ie. create a small ad) but it is a pain that I paid for Pages and now will need to buy something like Stone Create to do what I need. Although, that said, having used Stone Create for this little ad I must say that for the price it seems like a pretty decent program that will do a whole lot of the desktop publishing type of functions without the rather steep prices of the Adobe products. I kind of wish I had bought this program instead of Pages now.
Cheers,
Graham -
Linking rather than embedding movies
Hi,
I have been using Keynote for several years and have always embedded my movies within my presentation (i.e., selecting "copy audio and movies into document" during the initial save). Despite embedding the movies, I still keep a local copy of each in the same directory.
I'd like to, at the very least, link to rather than embed movies in future presentations, but don't know how that will affect portability. I often create my presentation on one machine and present using another. To that end:
1) Does anyone know how Keynote stores the location of media files that are not embedded? Are they absolute or relative?
2) Also, is there any way to "undo" embedding in existing Keynote files for which I had selected "copy audio and movies..." the presentations were created?
Thanks in advance.
- Matt Walter>Someone probably knows better then me, but can't you
embed the font in the library and then refer to it programatically?
Yes, you can do this, but this is a bit kludgy in my opinion.
I'd rather not HAVE to know that there is a font in the library
that I need to use. I'd rather be able to take the font of a
textfield that I am already using and then use the font that is
already embedded in that textfield to create create new textfields.
Creating a font symbol in the library is just adding extra
weight to the SWF file. If I have a textfield on the stage that
already has the font outlines, then adding the same font to the
library is just extra weight. But again it's not just a weight
issue - I'd rather not have to know that the font is in the library
to begin with.
I'd rather be able to say "Hey, you know that textfield on
the stage? well, use the same font for a new textfield? What's the
font that the textfield is using? I don't know and I don't care.
Just use the same font." -
Sysssislog got created as a regular rather than a system table
Hi. we run 2012 enterprise. I believe some testing I did on a new pkg recently created dbo.sysssislog (may have looked to sql like it was first time and it needed to create a new one) in the tables folder rather than tables\system tables folder.
But I believe we have other pkgs that create it (first time) under system tables. How can I better control this?thx Samir
Hopefully u understand from the question that I am past that.
There is no textbox on the connection manager's dialogue to override the behavior (ie that dbo.sysssilog be placed in the system tables folder called
tables\system tables) where dbo.sysssislog ended up with all of the other user tables, essentially in the folder called
tables.
There is no property in the connection's properties where tables\system tables
can be specified.
There is no property in the config ssis logs dialogue (the one u showed) where a path (tables\system tables) can be specified.
I reread Deepak's post and believe he is truly talking about a config file, that perhaps like u said I need to create. I'm not sure why u r talking about the dialogue boxes. I'm now asking if the file I mentioned is the key to controlling
this. I know what a connection manager is. -
Starting and stopping X + booting into command line rather than GUI
After installing Arch and struggling a bit to get the gui environment (gnome) to work I am now in a situation where the distro works fine but boots directly into a gnome session.
I would like to be able to stop X and I have tried various recommended commands. The only one that works seems to be "kill -15 X" (after doing Ctrl+Alt+F2), which ends X but sort of stops mid-process without ever going back to any command line prompt.
I copied etc/skel/.xinitrc into my home folder and uncommented "exec xterm", while re-commented "exec gnome-session". This did not make any difference at all so perhaps I'm not even using that script?
As I had some difficulties installing X (or rather get it to work) I may have installed a whole plethora of packages that I may not need. There are references to Wayland for instance, packages I installed. But am I actually using them? How can I find out?
I would like Arch to boot into a command line environment and then I'd start X from there - if that is what I want!
Any pointers in any direction regarding the above are welcome!
Cheers!What guide did you follow to install? The beginner's guide and the Xorg page contain the relevant information. Following just them should have allowed you avoid the mess you're in. Just saying that you've installed a whole plethora of packages will not help...it makes it near impossible to help.
You ought to read this. It sounds like you installed a display manager and set up auto-login?
Last edited by nullified (2015-02-20 17:26:59) -
Image retrieved from UCM is displayed as a link rather than an image
Hi Folks,
Back again with another question which probably has a very simple answer but I cant see the solution, so firstly my apols!
I am trying to get a single image from UCM and display it on a page. So far I have worked out how to query UCM for the image I want to and up to now have been able to get the page to render properly etc.
However, the problem I have now is that the image is not displayed, rather a link to the image (I believe this is the default). The only way to get the image to display is to click the link. I have tried various things such as changing the render options, the template category and template view but without any success. Instead of creating an image tag in the browser, an '<a></a>' is created.
Hopefully someone can tell me where I am going wrong and suggest a solution?
Thanks
MoHi,
I think I am using the first method where I drag an image from UCM on to my page creating a task flow which is displayed as part of a content presenter.
Here the code for the jspx:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<b>testing - content just after the view</b>
<af:document id="d1">
<af:form id="f1" usesUpload="true">
<af:pageTemplate viewId="/oracle/webcenter/portalapp/pagetemplates/pageTemplate_globe.jspx"
id="pt1" value="#{bindings.pt1}">
<f:facet name="content" >
<af:region value="#{bindings.doclibcontentpresenter1.regionModel}"
id="r1"/>
</f:facet>
</af:pageTemplate>
</af:form>
</af:document>
</f:view>
</jsp:root>
And the taskflow lifted from the page definition:
<taskFlow id="doclibcontentpresenter1"
taskFlowId="/oracle/webcenter/doclib/view/jsf/taskflows/presenter/contentPresenter.xml#doclib-content-presenter"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="taskFlowInstId"
value="${'4acb66c1-28fa-48b2-aac5-8a8ad424f4d2'}"/>
<parameter id="datasourceType" value="${'dsTypeQueryExpression'}"/>
<parameter id="datasource"
value="${'connectionName=CanonUCM#select * from ora:t:IDC:GlobalProfile where ora:p:dDocTitle=\'1210C\''}"/>
<parameter id="templateCategory" value="${''}"/>
<parameter id="regionTemplate" value="${false}"/>
<parameter id="maxResults" value="${''}"/>
</parameters>
</taskFlow>
Interestingly, when I configure my taskflow like this the image displayed correcly (this is taken from a separate test):
<taskFlow id="doclibcontentpresenter2"
taskFlowId="/oracle/webcenter/doclib/view/jsf/taskflows/presenter/contentPresenter.xml#doclib-content-presenter"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="taskFlowInstId"
value="${'c784a224-4d2d-4ff9-82e0-06e5959d880d'}"/>
<parameter id="datasourceType" value="${'dsTypeSingleNode'}"/>
<parameter id="datasource" value="${'CanonUCM#dDocName:OCC-001201'}"/>
<parameter id="templateCategory" value="${''}"/>
<parameter id="templateView" value="${'MLCT'}"/>
<parameter id="maxResults" value="${''}"/>
</parameters>
</taskFlow>
But when I use <parameter id="templateCategory" value="${'MLCT'}"/> nothing is displayed at all with example one.
Cheers,
Mo -
Create Custom Global Link in OBIEE 11.1.1.5
Hi All,
I have a requirement to create a new Global Header link like the Open,New,Catalog,Home etc links that we see in the global header in analytics and put downloadable content like pdf in that .
I came across oracle docs or other site that tell how to do it 11.1.1.6 or above but can any body suggest me or have done it 11.1.1.5 or below versions .
It willl be really helpful. So thanks in advance.Hi,
Thanks yar for the response. but this link depicts the way around for the 11.1.1.6 or more .
This does not work in 11.1.1.5 version and I am using that .
The main reason is that the file talke about here customlinks.xml does not exist in 1.5 version , so not possible to do it.
So can u help me with some other way around for it?
Thanks -
Possible to meet with Customer Service Rep, rather than call?
We have been overcharged on our bill (ATT Uverse) on so many occasions, and there are so many inaccuracies on the bills submitted, that we need to sit face-to-face with an intelligent customer service representative and go through all the bills for the last 5 months, in order to reach a comprehensive solution. Calling customer service has not been helpful. They seem to be looking at different charges and different bills than the ones in front of us, not to mention the incompetency of some of the reps with whom we have been dealing. I am considering filing a complaint with the Better Business Bureau...however, I want to give it one last try, before filing as many complaints as possible. Is there a way to meet (not call) with a customer service representative, who can go through the hard copy bills with us? Would going to their corporate office help?
Send a message to the ATT Customer Care team. This group has been known to get things done but give them two to three business days to respond. Be sure to include a detailed message of your issues along with your name and account number.
Watch the little blue envelope at the top of this page for a reply. -
Create Custom tree table panel collection toolbar buttons
Dear all
i have a tree table inside panel collection,inside the toolbar there is some buttons like show as top ,show top, expand all ....etc
what i want to do is i want to call it from custom button not from the toolbar button.
any suggestions
RegardsHi,
yes, it is. Its fixed in a the current build and should be fixed in TP4 (upcoming)
Frank -
Opens new window from link rather than new tab
I had Firefox set to open links in the same window. It has started opening them in a new window.
see [[Reset Firefox – easily fix most problems|Reset Firefox – easily fix most problems]]
[[Firefox does not work - Common fixes to get you back up and running|Firefox does not work - Common fixes to get you back up and running]] -
I am using Outlook 2010 and I have set this as default. Furthermore, this does not seem to be recognised by Windows XP as it is not listed in IE8 options, programs drop down list. Very strange. Had no problems previously with Outlook Express.
I am using Outlook 2010 and I have set this as default. Furthermore, this does not seem to be recognised by Windows XP as it is not listed in IE8 options, programs drop down list. Very strange. Had no problems previously with Outlook Express.
Maybe you are looking for
-
IPod turns off as soon as I unplug it and will not charge or respond.
I've had trouble charging my iPod, as in it won't charge whether hooked up to a wall socket or to a usb, I've tried changing both usb slots and sockets to no avail and tried resetting repeatedly. Now it works fine while plugged into a socket (not whe
-
Hi Expert, I have flat file as data source. I want to know how to handle deletes with flat files. For examaple, If this is my flat file data Company...Costcenter....Stock A......B......10 M.....Z.......20 K......W......25 Company and Costcenter are k
-
I have been using SQL Server for sometime with my company's product with no unusual problems for some time. However, having recently installed a Forte repository on a newly setup NT machine (Workstation 4, SP4), I have come across problems. The code
-
Hi everybody.recently while upgrading my nokia N73 software the internet connection was down,now phone refused to start-lost operating system-.any advice on hoe to install the operating system againe.I tryied nokia updater ,but it is not recognizing
-
Logic to build a New Column....
Hi Guys, I have sample data as below: Name_____Time Bucket________# Count of Phone calls Rob_______15 Minutes________ 2 Rob_______30 Minutes_________3 Rob_______1 hour____________2 Bobby______15 Minutes_______1 Bobby______1 Hour___________2 It is an