Creating dynamic storage bins
When you define a movement type, you can set up the system to create dynamic storage bins in the assigned interim storage area. In this case, the system uses the document number which triggered the stock movement as the coordinates for the interim storage bin.
For example, for a goods receipt, you can set up the system to use the purchase order number as the storage bin coordinates in the interim storage area for goods receipts.
These coordinates only exist as long as the quant is in the interim storage bin; afterwards, they are deleted.
Where do I do the config for the above scenario..
I tried creating bins for interim storage typees in LX20....after creating an interim storage area through referencing standard ones in IMG... I cant understand how the system creates dynamic bins for the movement type. Please help
LX20 is for static bins.
The dynamic ones are created automatically by the system when the stock is moved to the area.
In the movement type configuration in the WM:
(LE -> WM -> Activities -> Define movement types)
Select your movement type and warehouse and make sure the SCR box is checked
Also check that the field is mapped correctly for the dynamic bin in
LE-> WM -> Activities -> Define Requirements
Field Name is what is grabbed
Similar Messages
-
I receive materials in storage type 902 with movement type 101 with dynamic storage bin = purchase order number. Now I have to transfer this material to storage type 002 again with dynamic storage bin to be entered manually. This dynamic bin can have any number, for eg. I should be able to put sales order number or any other number.
How do I do this?
Your suggestions appreciated GURUS.Hi Atul,
Create a TO with ref to the TR that has been created initially. Confirm the Transfer Order. This will clear your goods from dynamic storage location and it will move to the specified storage type if u have maintained the correct strategies. It will not move to another dynamic storage bin as you mentioned unless you issue the stock to prodn or if u have activated the Quality check. Hope this helps.
Reward if u find it useful
regards
Anand.C -
FM or a BAPI to create Storage Bin
Hi friends,
Is there any Function Module or a BAPI to create a Storage Bin????
Regards,
Bhanu.Hi,
The first thing you can do is to search this forum using the keywords.. you will get a solution most of the times (80%)..
Else you can try in the Transaction BAPI...
Even if that does not work out
Go to SE37 give some keywords and search for a FM yourself.
Eg: BAPI * STOR * and press F4 it will give you possible FMs... Now you need to check the documentation for that BAPI..
Hope it is of some help.
Regards,
Pramod -
Transport the created Storage Bin Automatic from develop to quality LS10
Hello,
My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
Cheers,
MartaI could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
Thank you very much. -
Hello SAP Gurus,
Is there a way to create a storage bin using a function module or BAPI without using BDC.
Please suggest.
Thanks for the help in advance
PavanHi,
The FM <b>ABAP_DOCU_DOWNLOAD</b> will download ABAP documentation in HTML format.
some FMs dealing with local storage are
APPL_LOG_DELETE
APPL_LOG_DISPLAY
APPL_LOG_DISPLAY_INTERN
APPL_LOG_WRITE_DB
and so on..
is this what you asked.
reward points if helpful -
Storage Bin for Interim Storage Type 902 for GR
Hi,
We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
Thanks,
ShekharDear Shekhar,
Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
Best regards,
Christiane
Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM -
Row consolidations of same material in storage bins.
Hi Experts,
we have a requirement below,
. Current Process: Inventory Analysts utilize an established query in SQ00 to enable them to perform row consolidations of same material in storage bins to maximize storage bin capacity and create empty storage bins in warehouses .
Example: Row 621 only has 1 pallet and that pallet will fit in row 625(Row) of which only has 31 but the max is 32 in that bin. Again you see bins 725 and S-27(material) only have 1 pallet each and can fit easily in 715 as it only has 15 pallets but can hold 32.
. The analyst take the data from this query and manually create a Row Movement sheet to give to the forklift drivers to perform the assigned movements.
1) is it possible SAP to do automate this task?
2)Can SAP logically determine this equation?
3) Is it possible SAP to generate this spreadsheet and go ahead and create the TO in the background?
Please do the need full ASAP, Quick response is highly appreciated .
Thanks and Regards,
ChiranjeeviOf course you can do this, but not with SQ based reports.
You will need to code a custom ABAP report.
First you will need to find best matches in storage bins, then use BAPI for TO creation.
You will easily have all the info from the source and destination bins from your matching
table/data. You can search forums for more info on this BAPI, but I can tell you it is pretty
easy to use even for an inexperienced ABAP-er.
I have created a report for this in my company a while ago, but didn't implement automatic
TO creation since we wanted to give our WH people freedom and didn't want to create a huge
amount of TOs which need to be cancelled if WH workers don't have time to perform this action.
But this is a great tool for any warehouse, especially with bulk non-mixed storage types with
a large number of bins.
Regards -
Hi,
We need to created storage bin for warehouse. we were planning to use LSMW. We cannot use auto creation of stroage bin LS10 since the numbers are not in a proper sequence.
However we need to add value to the field 'Sort fld pick' for every storage bin which will be used latter for sorting the storage bin in pick list.
This field is not available when u create storage bin. This field is only avaialble when u are change mode after creating the storage bin.
Also we cannot use the customization for define sort sequence for stock removal.
Can anybody help me how to fix the issue.
thanks in advance
RegardsHi,
Storage Bins creations and Sort fld stck plcm/Sort fld picking are all master data maintenance, to maintains these you need to create LSMW or BDC. There is now option on customization etc.
let me know if you have any more questions.
Regards,
Madhu -
MB1C Error "Storage Bin 450 does not exist Check your entry"
When doing MB1C error message says
:"Storage Bin 450 does not exist Check your entry"
I have maintained all movement types, storage location well. I have not created any storage Bin then why it is asking for this?
Please help for solution with steps.Thanks for your answer. My problem is different but I resolved it myself as under:
Log Execution->Shipping>Picking>Lean WM-->Define control parameter and no. Range....All three tabs were set.Here in check box I tick mark as Active Lean WM.
Then went to Control Plant /Storage location/Warehouse No Assignment
Here Plant/Storage Location/Warehouse were given
Degree of activation=1
store tye for picking in LWM=005
So Lean WM was activated. So in MB1c this error was disappeared as I had activated Lean WM.
But another error came "There is no item category assigned to account 799999/4050" This is related to field status group in G/L account but still not solved.I am missing Commitment Item in tab Create/Bank/Interest in my G/L account. I tried to run program RM07CUFA in SE 38 saying error No MM group in 3 tabs but could not further identified.
Above issue was resolved sothread is closed. -
movement type 311
tcode mb1b
from sloc 00
to slco 01
quantity 20 pc
error is coming storage bin Z1 not found
settings i have done in warehouse
in 311
destination storage type : 921
in material master : stock placement (maintianed)
stock removal (maintianed)
storage section (maintianed)
search atrategy for storage type (maintained for high rack and goods are to be removed from here )
search strategy removal and Putway BOTH ARE MAINTAINED FOR HIGH RACK AND SHELF STORAGE
Edited by: Rahul Tyagi on Feb 12, 2008 11:56 AMi have created 4 storage types IN my warehouse Z1 and asigned this Z1 to plant and sotrage location SLOC 00 & SLOC 01 in spro>ep>assignment>le
now both the sloc are assigned to the same warehouse that is z1 so it means boththe sloc have same sotrage area avilable
goods are lying at high rack(storage area) for sloc 00
in material master storage indictor for stock placemnt mentioned sz1
entry in storage type seach is like this
Z1(WH) E(STOCK REMOVE) ZSI(STORAGE TYPE INDICATOR) HIGH RACK (STORAGE TYPE)
FOR STOCK REMOVAL ENTERYS ARE IN STORAGE TYPE SEARCH LIKE THIS
Z1(WH) A(STOCK PUTWAY) ZRI(INDICATOR FOR STOCK PUTWAY) SHELF STORAGE
I HAVE ALSO CREATED THE STORAGE BINS FOR ALL THE STORAGE TYPES
AND POINT TO NOTE IS Z1 IS NTO A BIN ITS THE NAME OF WAREHOUSE
IF ASSIGN INTERIM STORAGE AREA IN 311 N FIELD SOURCE THEN IT WORKS FINE
BUT IF I ASSIGN INTERIM AT DESTI THEN THE ERROR COMES AS GIVEN IN THE VERY BEGI.
AND THE RIGHT WAY IS TO ASSIGN THE SINTERIM IN THE DEST. IN 311
PLEASE SUGGEST THE SOLUTIONI CAN ALSO SEND U THE SCREEN SHOT IF U CAN PROVIDE U RMAIL ID (IF IT IS POSSIBLE FOR U)
Edited by: Rahul Tyagi on Feb 12, 2008 12:08 PM -
Hi,
a SAP standard system in SPRO, Logistics Execution, Warehouse Management, Interfaces, Generate Interim Storage Bins contains any storage bin ?
Best regardsHi,
Goods transfers in the WM system are processed by means of movement types. In the definition of the
movement types, it is possible to have interim storage bins addressed. you can have these bins generated automatically
Example:
According to the definition of the WM movement type 501 (GR without Purchase order), the material is posted to the material storage bin automatically.
If you do not want to use this option, you have to create the storage bins maually using
WM-Master Data-Storage Bin-Create-Manually
Activities: Generate the interim storage bins for your warehouse numbers
Thanks,
DV -
Interim storage bins creation, List of standard interim storage bins
Hi,
We need to create interim storage bins as part of cutover. can someone provide me list of standard interim storage bins to be created. Which transaction will be used to create interim storage bins
Thank youHi,
You can use the transaction LX20 to create interim bins.
Following interim bins will be available in the standard.
001 901 WE-ZONE
001 902 WE-ZONE
001 910 WA-ZONE
001 917 QUALITAET
001 920 UML-ZONE
001 921 UML-ZONE
001 922 U-ZONE
001 980 DUMMY
001 998 AUFNAHME
001 999 DIEBSTAHL
001 999 SCHROTT
Thanks & Regards, -
Dynamic destination bin with Mov. Type 311-312 and Storage type 001?
Hello WM experts,
I'm tryng to determine dynamic destination bin with mov. type 311, when trasfering handling units from IM to WM storages (VLMOVE). First 311 transfer to St. type 921, and then 312 transfer from 921 to St. type 001. I don´t want to use a Fixed destination storage bin in St.type 001, I'd like to configure this like movement type 601, that create a dynamic destination bin using outbound delivery. Can be this possible?
Another question I have: Is possible to crearte individivual items with Source target quantity in alternate unit equivalent to 1 unit, in LT03. For example, the item 10 of my outbound delivery says 3 ST of XYZ material. But I want to crear 3 items with Source target qty. 1 ST. Is this possible with customizing or using an enhancement? ...
Why I want to find a way to do any of these things above, because when I have indivial intes in the TO, I can confirm them in RF (LM61) just pressing one button, I don't need to declare any difference, and makes my picking process faster.
Best regads, and thanks for you time and help.
Favio Del Castillo.Hi Mohit ,
please check below link , you need to perform steps as given
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
also see the sales order subcontracting using the business addon
http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm -
Create the stock in storage bin level
Hai all
while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
regards
satishDear Satish
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
--> Maximum weight
--> Total capacity
--> Fire containment section
--> Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
<i><b>For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .</b></i>
Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
Thanks
G. Lakshmipathi -
Outbound Delivery created between two different Storage Bins
Dear Guru ,
Using WM can I create an SD Outbound Delivery between two different storage bins linked to the same storage location ?
ThanksHi,
Between storage bins only transfer posting is possible as per my understanding.
Maybe you are looking for
-
Hi there, I have JPanel which contains label and image icon and i want to drag them out to another panel and droped there. Is this really doable with swing. Please share your thoughts with me Thanks, - Prashant
-
Hi Guys, We have one specifi user , for whom some back ground jobs are scheduled each day . If i go to SM37 all these jobs are assigned to him . Now, we want to change the start date of these jobs , like change the start time of these jobs. how can i
-
How to bind each DataGrid column separately?
Good day fellow Flex developers! Could you please help me out. I am trying to figure out how to bind each DataGrid column separately. I need to bind each column to a separate bindable array variable. Is there a dataProvider property for each DataGrid
-
Hello, I tried to extract thumbnail image from MDM using the following method: //declare CatalogCache object CatalogCache catalogCache = new CatalogCache(); //declare disc path String path = "C: Temp cache"; //initialize catalogCache (this require it
-
I am using Oracle forms 10.1.2.0.2 on Windows Xp and using a java bean taken from following location: http://forms.pjc.bean.over-blog.com/ext/http://sheikyerbouti.developpez.com/forms-pjc-bean/first-bean/first_bean.pdf Now when i deploy it in my deve