Creating field s dynamically by user

I wanted to create a project ,where the user can create his own form
eg- if he wants to create a registration form , he can chose what fields in the form he wants, he should be able to drag and drop items like button , textinput, dropdown list etc

Similar Messages

Dynamic Local User Issue

When i look at snapins thru consoleone i can see that Zenwork 7.0.1 snapin is installaed.
I have Novell Client 4.91 SP5 and Zenwork Client 7.0.173.91015 installed on the clients running WinXP Pro SP3.
There is different of failures that happens..
Senario 1:
I install a Latitude D610 with a WinXP Pro SP3 original CD, from scratch. I only install the drivers for the LAN-card to get access to the network. I do not update windows updates etc.
I install the Novell Client 4.91 SP5, after that i install Zenwork Client 7.0.173.91015. And apply some registry settings to make the novell client to use the "tab-function" and hide advanced settings etc..
I have my eDir user "ADMIN1" with the policy package with settings to Dynamic Local User set to create a local user with name Admin, but im not using volatile user. So the local windows user Admin will be saved when logged out.
I login once with my Admin1 user, it creates the local profile Admin from Default User (with the help of Zenworks, and the policy Dynamic Local User?). I restart the computer and login again, and the local profile Admin craches and create a new one from Default User but this local user profile is namned Admin.Computername.
Ive tested this with atleast four other computers (different hardware) so it cant be a driver issue.
Ive looked thru the local logs, and i cant find anything about any problem with reading the NTUSER.DAT as could be a problem to load the local profile.
I even tested this senario when i update all windows updates etc, with two different version of the zenworks client and so on. ive been testning this for like 100 times now atleast. and same failure is happening. Ive even tested this in a virtual environment (vmware workstation).
Senari 2:
Like the problem descried above, in some cases it loss the connection or something with the zenwork server side and the zenwork client on the client computer... Since it does not attempt to use the settings from Dynamic Local User, becuase i got the windows login window, and i have to login to an already existing windows local account (with otherwords i cant login to the Admin-profile since i dont know the login information to this account since its created by zenworks / dynamic local user settings, and from the settings there you cant set a password, just the name and role of the windows accout that should be created)..
And after a while i try again, and then the settings from Dynamic Local User passes by and log into the, (let me say) Zenworks created local user profile (set by Dynamic Local User settings).
I wanna mention that all computers thats old, no reinstallation.. I can login to without problem, without any crashes of the Windows Local Profile.
Ive succeded once without any Windows Local profile crash, rebooted this computer over and over again, and no failure. If you succed twice, it seems like its fine. But then i reinstalled this computer, just like i did to make it success. But this time it failed on the second try, and got a crashed profile....
Its kinda old hardware to the server where i have my Zenworks, could that be the case? Could it be some timeouts?
The concults i use to fix some problems in our environment updated zenworks from the serverside just before christmans.. Could it be any problems with some windows patch etc?
Any help would be appreciated!
// Jokohanho

> installed on the clients running WinXP Pro SP3.
<snip>
> I restart the computer and login again, and the local
> profile Admin craches and create a new one from Default User but this
> local user profile is namned Admin.Computername.
I only know of one XP SP3 issue that could cause this, but it involves a pw
change and RP:
"When you try to log on to a Windows XP SP3-based computer by using a
roaming profile, the roaming profile cannot load."
http://support.microsoft.com/kb/958058
Regards
Rolf Lidvall
Swedish Radio (Ltd)

How do you create a form that has user permissions per form field for different user?

I need to create a form that is used by multi people but each user needs to fill out different fields within the form. I need the first user to make selections from a list and save it to send to another (the selection fields then need to be locked). Then the other user checks one of the selections made by the first user and saves the document to send back to the first user. Not sure if this is possible. I would like the first form field selections not to even show as a highlighted field to the other user (like just be more like a text field). I want the document to be able to be used more than once. The list selections will change and need to be sent to the other user at least once a month or more. Has anyone done this?

There's no built-in way to do that, but it's probably doable using a custom-made script to hide and/or lock the fields.

How to change the text of a user defined field in dynamic selections?

Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
Ven

Madhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks,

How to create a field catalogue dynamically?

Hi guys,
      I have to create a field catalogue dynamically. I am creating the internal table dynamcially. It is <fs_dyn_table>. I am passing this to the function module REUSE_ALV_FIELDCATALOG_MERGE.
<fs_dyn_table> contains five fields kunnr, land1, name1, ort01 and telf1 which i am passing from selection screen.
This is how my function module is
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     i_program_name               = sy-repid
   i_internal_tabname             = '<FS_DYN_TABLE>'
   i_inclname                     = sy-repid
    CHANGING
      ct_fieldcat                  = it_fcat
   EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3.
I am not getting any values in the internal table it_fcat.
I would like to know if there is any other way to create field catalogue?
Help will be appreciated.
Thanks,
Ibrahim

Hi,
Kindly refer wiki links:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/complete%252bcode%252bfor%252bdynamic%252bfield%252bcatalog%252bcreation
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/create%252ban%252balv%252b(%252bUsing%252bOOABAP%252b)with%252bdynamic%252bField-Catalog
Hope they help you.
Regards,
Tarun

Accessing dynamically created fields

Hi,
I have a html that has an input field on it. Say we enter a number( e.g. 5) and submit the html.
The html transfers control to 1. jsp which creates input fields based on the number entered. In the above example 5 input(text) fields are created dynamically.
Once I submit 1.jsp, it transfers control to another 2.jsp.
In 2.jsp, I need to access the values entered in the 5 fields on 1.jsp.
request.getparameter() returns value only from the 1st field (out of the 5 fields). How to access the remaining fields ?
Any help is really appreciated.
Thanks,

Thanks a lot. That worked!!!!
Even the ordering seem to be ok.
With your other suggestion, I had tried that before but that did not work.
I created field names as field1,field2..etc on the fly and stored this in a String variable - fileName.
<% fileName = fileName concatinated with number %>
<input type = "text" name=fileName > Note: There are no quotes around fileName. So fileName could be fileName1, fileName2 etc
(I don't think the quotes around name attribute really matters.)
When I say request.getparameter("fileName") it returned only the 1st fileName. Let me know what youythink.
Thanks again.

Create XML file dynamically from textInput fields

Hi,
I'm very new to Flex and trying to create an application that creates XML files on the users' local computer, based on a users input into textInput fields.
At the moment I'm having trouble finding how to dyamically create an external XML file at all, ideally when the user pushes a button a browseForSave dialog box will open allowing the user to select somewhere on their hard drive to create the XML file.
Can anyone give me a hint what direction I should be heading in?
Thanks

If this post answered your question or helped, please mark it as such.
You could use a SharedObject for small files, but in general Flex does not have access to the local hard drive.
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
initialize="init()">
<mx:Script>
    <![CDATA[
      public var mySO:SharedObject;
      public function init():void{
        mySO = SharedObject.getLocal("mydata");
        if(mySO.data.myData!=null){
          var xml:XML = mySO.data.myData;
          fname.text = xml.fname;
          lname.text = xml.lname;
          email.text = xml.email;
      private function storeData():void{
        var xml:XML =
          <data/>;
        if(fname.text != ""){
          xml.appendChild(<fname>{fname.text}</fname>);
        if(lname.text != ""){
          xml.appendChild(<lname>{lname.text}</lname>);
        if(email.text != ""){
          xml.appendChild(<email>{email.text}</email>);
        mySO.data.myData = xml;
        mySO.flush();
      private function resetData():void{
        mySO.clear();
        fname.text = "";
        lname.text = ""
        email.text = "";
    ]]>
</mx:Script>
<mx:Form>
    <mx:FormItem label="First Name:">
      <mx:TextInput id="fname"/>
    </mx:FormItem>
    <mx:FormItem label="Last Name:">
      <mx:TextInput id="lname"/>
    </mx:FormItem>
    <mx:FormItem label="Email:">
      <mx:TextInput id="email"/>
    </mx:FormItem>
</mx:Form>
<mx:Button label="Store Data" click="storeData()"/>
<mx:Button label="Reload Stored Data" click="init()"/>
<mx:Button label="Delete Stored Data" click="resetData()"/>
</mx:Application>

Creating Forte FieldWidgets Dynamically at Runtime

Hi Everyone,
Could someone please help me with the following problem I have when
creating Forte fieldwidgets dynamically at run-time. I am using Forte
ver. 3.0.G.2.
(-1-) I have a window class with an empty gridfield, <grfMain>, inside a
viewport. The idea is to populate the gridfield with DataField
fieldwidgets dynamically at runtime. Depending on some input criteria,
sometimes some of the DataFields need to map to IntegerNullables, some
to DoubleNullables and some to DateTimeNullables. (Please note that I
cannot use the Forte window workshop to create these fieldwidgets,
because different types of fieldwidgets will be needed at different
times, in different numbers, at run-time. ) Here is a sample of how I am
currently trying to achieve this:
dfDate : DataField = new;
dfDate.MaskType = MK_Template;
dfDate.DateTemplate = new( value='dd/mm/yyyy' );
dfDate.Row = 1;
dfDate.Column = 2;
dfDate.Parent = <grfMain>;
dfInt : DataField = new;
dfInt.MaskType = MK_INTEGER;
dfInt.Row = 2;
dfInt.Column = 2;
dfInt.Parent = <grfMain>;
dfReal : DataField = new;
dfReal.MaskType = MK_FLOAT;
dfReal.Row = 3;
dfReal.Column = 2;
dfReal.Parent = <grfMain>;
The code above is called after the window has been opened with the
Open() statement.
Looking at the code above, one obvious omission is that the "Mapped
Type" of the Datafields are not set up. In the Forte window workshop, an
interface is provided to set up the "Mapped Type" of the Datafield
widgets, but I'm not sure how to do that dynamically, and that is
basically my biggest problem here.
(-2-) If I now run the window class, the Datafield widgets get created,
and they all have the correct input maks, but no validation gets done
when one tabs away from the field. For example, Datafields with
MaskType=MK_INTEGER will gladly accept '--1--0++7', while Datafields
created in the window workshop (mapping to IntegerNullables) will do a
validation, and not allow one to tab out of the field before the extra
minus and plus signs are not removed.
I have the same problem with the Datafields which have
MaskType=MK_Template and DateTemplate='dd/mm/yyyy'. For the date, one
can enter something like '2*\**\****', and leave the field, while the
same type of datafield created in the window workshop (mapped to a
DateTimeNullable), will not allow you to leave the field before a valid
date has not been entered. To summarise, the input masks of my
dynamically created Datafields work fine, but no validation gets done
when the field looses the focus.
(-3-) As a test, I used the Forte debugger ("view"-"local variables") to
look at the differences between Datafields created dynamically, and
those created in the Forte window workshop. One very obvious difference
was that Datafield attribute "MapTypeName" was filled in for the window
workshop Datafields, but not for my dynamically created Datafields. The
problem is that Forte does not allow me to set this attribute
dynamically in my code. How else can I setup the Mapped Type
dynamically?
(-4-) In order to have a consistent look-and-feel throughout our Forte
project, we are making use of Domain classes for DATE and DECIMAL data
entry fields. My questions are:
(4.1) How must I go about creating Datafields dynamically that make use
of these Domain classes?
(4.2) Is it also a matter of setting up the "MapTypeName" attribute,
which I cannot seem to do?
(4.3) Is the mapping done differently for Domain classes?
(-5-) Another interesting thing to note for Datafields created in the
Forte Window Workshop, is that if the mapped type is IntegerNullable
with Input Mask = Integer, or DoubleNullable with Input Mask = Float,
then the Object that the Datafield widget maps to, must first be
instantiated before the Loose-Focus validations will start to work. For
example, if a Datafield widget called "dfTestInt" was created in the
Forte window workshop, which maps to an IntegerNullable, and Input Mask
= Integer, then the following line is needed before the window is
displayed: dfTestInt = new;
Without this line, one can enter something like '2---3+++7', and leave
the field.
This is not true for Datafields where the mapped type is
DateTimeNullable with say Input Mask Template='dd\mm\yyyy'. In this case
validations are done even thought the object being mapped to, has not
been instantiated yet. In other words you will never be able to enter
'2*/**/****', and leave the field for datafield created in the window
workshop. Maybe in this case the validation is being done by the
template itself?
Thanks in advance
Riaan
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

what I mean is rendering JSF components on the fly, becuase some time you don't know things at design time. Lets say I am designing a page in creator that shows the total number of dependants that belongs to a primary inusrance member in text boxes. Of course we don't know in advance how many dependants we have for a specific member unless we go to databse and fetch all the data at runtime. Desiging some thing dynamic like that is very easy in CGI or ASP/JSP but JSF model seems very static due to it's design time feature.
So is it possible with JSF or not?

Custmer Class. field in dynamic selection of FBL5N not cming in Report

Hi,
After selecting Customer Classification field in Dynamic selection of Transaction Code FBL5N and saving it and creating a Variant, this field doesnot come in output of report after execution.
Can anybody send a reply on this asap.
Regards
Bob

Hi,
After executing the report in FBL5N, check in the display layout if the same field is available. If it is available include it in the display list (Left side of the pop up screen). Save the layout after including and make it default or user specific as per requirement.
Hope this helps you.
Thanks and Regards,
Anit

How to create table columns dynamically ?

Hi All,
I am working on an SSRS report that will show sales in the past 5 years. If the user selected to view sales of past 3 years he will only see 3 columns. so How can I create table columns dynamically at run time and how can I make sure that their dimensions
will adjust to fit the report page size.

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

Creating a application dynamically for a component

Hi,
Does any one know how to create an application dynamically for a component, so without using SE80?
I already found class cl_wdy_md_application, but I do not know if this is the right direction. Maybe somebode already solved this issue.
Regards,
Remco

Hi Thomas,
In SRM it is possible to call own made webdynpro components and fill them with data, and then process these data into a new shopping card. This can be done by filling a so called HOOK_URL. In SRM you have to do customizing and fill in the URL to be used of the WebDynpro application. So far, still no problems.
I have built a component by which an user can fill several Z tables and then he can display a form he has made by himself (a so called free order form). So the component will check all Z tables, and generate in one view, the context dynamically as also the layout dynamically. In all Z tables one field has been used as one of the keyfields and that is free order form name and this is also a parameter of the application so that this application knows which data to get from the Z tables to generate a form.
And because it is possible to generate more then one forms, I have create per form 1 application with the specific parameter, and this URL can be entered in the customizing of SRM.
This application creation I did myself, but now I want to accomplish, when the user creates a new form by filling specific tabels via webdynpro, that he can generate the application by himself.
Maybe I can create a FM/BAPI for the BDC recording and then call this from my web dynpro application as there is no API.
Do you maybe have another solution?
Regards,
Remco

Creating Crystal Reports Dynamically from an incoming SQL query

Hi,
I have a requirement where a sql query will be entered by the user in a text box and in the back end java code, i have to create a crystal report dynamically based on that sql query and show it in the crystalviewer object.
For example if the user writes "select x,y from xtable ", i should be able to create a report with 2 fields, and if the user says "select x,y,z from xtable" then i should be able create and show a report with 3 fileds...thsi report creation should be done in the click event.
Is this possible in java? I have found something similar in .NET... pls have a look at this
http://vb.net-informations.com/crystal-report/dynamic_crystal_report_from_sql_query_string.htm
Thanks,
Preethi

Hi Preethi,
Can you please share the steps with me? I am also looking for dynamic SQL being applied to the crystal report.
Thank you so much for your help in advance.
Regards,
Janakiram D.

How to create a viewobject dynamically without using wizard

Hi,
I am Using jDEV 11G, i need to create a viewobject dynamically without using wizard, without binding from any entity.
Actually my intention is to make a grid like in .Net, when a user want to create a new row in RichTable without using DB.
just like shopping cart.
i have done thsi code:
ViewObjectImpl view=new ViewObjectImpl();
view.addDynamicAttributeWithType("Att1","String",null);
view.addDynamicAttributeWithType("Att2","String",null);
view.addDynamicAttributeWithType("Att2","String",null);
Row rw=view.createRow();
rw.setAttribute("Att1","First1");
rw.setAttribute("Att2","First2");
rw.setAttribute("Att2","First3");
view.insertRow(rw);
I have a RichTable , i need bind this viewobject into that.
Edited by: vipin k raghav on Mar 10, 2009 11:39 PM

Hi Vipin,
You can create the view object with rows populated at run time.
[http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcquerying.htm#CEGCGFCA]
For reference of how to create an empty rwo at run time on button click
[http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html]
~Vikram

Filter Project Server custom field based on current user?

I've got a Project Server 2013 custom field, and I'd like to create a view that only shows me projects where the value in that custom field equals the current user. Simply put: I'm trying to find functionality similar to the [Me] filter in SharePoint.
Apparently, simply using [Me] doesn't work. How can I fix this?

I am trying to do something similar. were you able to find a solution to this? I am assuming no.
Parthiv Bhuta . Consultant

How to create internal table dynamically?

hi all
I have a particular internal table in memory area( thru EXPORT TO MEMORY ID ....)
how can i create an internal table of this type in another program at runtime ?
this internal table need not be a data dictionary type.
i.e., i need to create an internal table of type which
is stored in a particular memory-id.
Regards,
Naveen........
null

Hi,
Check this code :
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE,
                <fs_dyntable>,
                <fs_fldval> type any.
PARAMETERS: p_cols(5) TYPE c.
DATA:        t_newtable TYPE REF TO data,
             t_newline TYPE REF TO data,
             t_fldcat   TYPE slis_t_fldcat_alv,
             t_fldcat   TYPE lvc_t_fcat,
             wa_it_fldcat TYPE lvc_s_fcat,
             wa_colno(2) TYPE n,
             wa_flname(5) TYPE c.
* Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
* Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
DATA it_fieldcatalog TYPE lvc_t_fcat.
DATA lr_table TYPE REF TO data.
FIELD-SYMBOLS <lt_table> TYPE table.
*-- Import the fieldcatalog
IMPORT it_fieldcatalog TO it_fieldcatalog
       FROM MEMORY ID 'CREATE_DYNAMIC_TABLE'.
IF sy-subrc <> 0.
EXIT.
ENDIF.
*-- Create the dynamic table with the field catalog as structure
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog           = it_fieldcatalog
IMPORTING
    ep_table                  = lr_table
EXCEPTIONS
    generate_subpool_dir_full = 1
    OTHERS                    = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
*-- Convert the reference into a table
ASSIGN lr_table->* TO <lt_table>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
*-- Export the created table so that the function module can import it
EXPORT lt_table FROM <lt_table>
       TO MEMORY ID 'CREATE_DYNAMIC_TABLE'.
Regards
L Appana

Creating field s dynamically by user

Similar Messages

Maybe you are looking for