Creating file on network with same name

Hello All,
I have created the A0001BOE20060001.txt file on my machine & i want to create same file with same name on the different machine,
i m able to copy all data in that file & recreate it on the server but i have problem with how to GET same file Name
As i m creating a new file & writing data on the 1.txt which i m creating on the server
How should i recognize the file name & create the same file on the server????

Is this on Windows?
I believe that java.io.File works with UNC paths. For example, if you have a network resource on the share myshare on machine my-pc, you could do something like:
File f = new File( "\\\\my-pc\\myshare\\myfolder\\myfile.txt" );
Note that you have to escape backslashes. You'll also want to be sure that you have permission to access the share - it won't prompt you for a password, so you must have already authenticated using Explorer or net use.
Thanks,
Brian

Similar Messages

Script that saves every visible layer as individual file in folder with same name

Hello.
In my PSD I have many folders with unique name (like "1234"), that contains layers named as digits (like "0", "1", "2" etc).
I need to save each layer as JPG to folder with the same name and hierarchy that is in PSD file.
How to do that using JavaScript .jsx scripts?
Thank you for any response.

What exactly is the problem – addressing the Layers, creating the Folder structure, …?

Two soa domain with same name "TestSOADomain" sharing same SOA schema ?

I tried creating two soa domain with same name "TestSOADomain" (different path) sharing same SOA schema .However one domain came UP to Running mode and other domain going to AdminMode and "soa-infra" application of that domain is not active.
I do want to understand can this be possible with SOA ,ie. two soa domain sharing same SOA schema ?
If possible what are all the problems might come
1. While executing soa composites with asyncronous behaviour ?
2. How the polling services will work ?
3. will the XREF_DATA table ROW_NUMBER column inserted uniquely while inserting data from two different domain into same SOA schema ?
4. Other issues ?
Thanks

Each domain is expected to refer to its own unique database schema. Same SOA schema should not be shared by multiple SOA clusters/domains. It is technically possible though, I suppose, and still can run fine any one SOA environment at any given time with the other SOA environments/domains (sharing the same SOA schema) shutdown. It is not the general/recommended practice to share SOA schema across domains and there could be potential implications and unexpected behavior, particularly when the SOA environments pointing to the same schema are all running at a time.

Automator and applescript to copy new files in a folder with same name as parent folder

I have an iMac with a pictures folder (Finder folder) containing several subfolders with pictures. As per now, all these subfolders are imported into an iPhoto library (and the structure of the Finder pictures folder is thus maintained: The iPhoto events are named the same as the Finder subfolder). I.e. I have not created any albums in iPhoto.
I have also set up a workflow, where new iPhone photos are automatically being synced to specified Finder folders within the iMac pictures folder. So what I want to do is to make a workflow to import potential new photos from week to week into the existing iPhoto structure. I know iPhoto has this Autoimport folder, so this one is unpacked and "mapped". So, this is what I´m hoping to do:
Automator (iCal - want to do this on a weekly basis):
- Get specified Finder items -- set to target folder = iMac pictures folder
- Get folder content (with subfolders)
- Filter Finder items
     - Items from the last 7 days (which then would be any new files created last week)
- Applescript/shell script loop(?)
     - Get folder name for each file´s (from previous step) parent folder
     - Create new folder with same name as the file´s parent folder (if not already existing) under the iPhoto Autoimport folder
     - Copy the given file into the folder from above
- Run iPhoto application (Automator task), which then should just auto import the new photos according to the Finder folder structure
Whith the workflow above, I aim to maintain the existing iPhoto structure, and just import new photos into the existing structure. Creating folder names under the Autoimport, similar as the existing Finder folder names / iPhoto events should make it possible to have the new files imported under the existing event, right?

Anyone?
I have now switched to Aperture (from iPhoto) due to Aperture´s capability to handle Finder folder structure, and due to the possibility of having the pictures within Aperture as referenced files to the pictures within the Finder folders (i.e. possibility to delete pictures from both library and Finder folder at the same time).
So I have a superior Finder folder called "Album". Within "Album" I have several subfolders (sub albums) containing pictures. The "Album" folder with subfolders are imported into Aperture as "Projects and albums", and the pictures are uploaded within the Aperture structure as referenced files. So for now the Aperture structure is more or less a direct mirror of the Finder folder structure, whereas "Album" is the project.
And this is my current workflow in Automator, but I´m searching help with my Applescript:
- Get specified Finder items (target folder = the superior Finder folder "Album")
- Get Folder content
- Filter Finder items (to look for potential new files to import into Aperture)
     - Kind is not folder
     - Date created last X days
The output files from this task enters an Applescript
on run {input, parameters}
       repeat with f in input (**Loop**)
               tell application "Finder"
                      set fileName to name of (f)
                      set parentFolder to name of container of (f)
                      tell application "Aperture"
                             tell library 1
                                    tell project "Album"
                                           if (exists album parentFolder) then
                                             ** I then would like to check if fileName already exist within the existing album**
                                             ** If not existing, I would like to import file f into the existing album as a referenced file**
                                           else if not (exists album parentFolder) then
                                                   make new album with properties {name:parentFolder}
                                            ** I then would like to import file f into the new album as a referenced file**
                                           end if
                                    end tell
                             end tell
                      end tell
               end tell
       end repeat
end run

How to delete one existing file before uploading a file with same name?

Hello everybody.
I am uploading a file to Tomcat server. But, the problem is:
i want to delete an existing file in the server, if i upload a fresh file with same name. In other words, "First check for the file with the same name in the server. If it exists, then delete existing file in the server and upload fresh one". If such file doesnot exist, then upload the file to server.
I have given deleteonExit()
but, for the first time when user is uploading, i want to check for the file with same name in the server.
i am pasting the code here. please help:

<%
String contentType = request.getContentType();
if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0))
DataInputStream in = new DataInputStream(request.getInputStream());
int formDataLength = request.getContentLength();
byte dataBytes[] = new byte[formDataLength];
int byteRead = 0;
int totalBytesRead = 0;
while (totalBytesRead < formDataLength)
byteRead = in.read(dataBytes, totalBytesRead, formDataLength);
totalBytesRead += byteRead;
String contextRootPath = this.getServletContext().getRealPath("/");
contextRootPath=contextRootPath.concat("uploaded");
String file = new String(dataBytes);
String saveFile = file.substring(file.indexOf("filename=\"") + 10);
saveFile = saveFile.substring(0, saveFile.indexOf("\n"));
saveFile = saveFile.substring(saveFile.lastIndexOf("\\") + 1,saveFile.indexOf("\""));
// Create a directory; all ancestor directories must exist
File outputFile = new File(contextRootPath, saveFile);
var=outputFile.getPath();
outputFile.createNewFile();
int lastIndex = contentType.lastIndexOf("=");
String boundary = contentType.substring(lastIndex + 1,contentType.length());
int pos;
pos = file.indexOf("filename=\"");
pos = file.indexOf("\n", pos) + 1;
pos = file.indexOf("\n", pos) + 1;
pos = file.indexOf("\n", pos) + 1;
int boundaryLocation = file.indexOf(boundary, pos) - 4;
int startPos = ((file.substring(0, pos)).getBytes()).length;
int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length;
FileOutputStream fileOut = new FileOutputStream(outputFile);
fileOut.write(dataBytes, startPos, (endPos - startPos));
fileOut.flush();
fileOut.close();
outputFile.deleteOnExit();
%>Please help. Thanks for taking time.
Regards,
Ashvini

Thank you MartinHilpert,
I have one more doubt,
I am uploading the file to one folder called "uploaded". Before uploading a fresh file, i want to delete all existing files in that folder. IS that possible ?? If yes, can you please tell me how to do that ??
Regards, Thanks for your time.
Ashlvini

Merging Log Files with same name

Hello,
I have log files with same name 00000000.jdb (because created at different machines). I would like to merge data stored in these two files.
I tried below approaches which do not work:
1. rename one of the files -> doesn't work as file header has file name info which doesn't match with renamed value
2. db dump/load -> dump and load works without error. (i have to dump Entity related Database and Format related Database -- from -l option) However when i try to read the file, it gives error.
Exception in thread "main" com.sleepycat.je.EnvironmentFailureException: (JE 5.0.103) Catalog could not be refreshed, may indicate corruption, errorFormatId=52 nFormats=51, . UNEXPECTED_EXCEPTION: Unexpected internal Exception, may have side effects.
I am using EntityStore and thus Annotated Entities.
Does any one has any insights?
Thanks.

Yuvaraj,
As you discovered, it is not possible to use .jdb files from one environment in a different environment. The .jdb files use an internal format with relationships between files that form the Btree.
I'm glad to hear you were able to use DbDump and DbLoad successfully.
--mark

How to create device IDs with same name

i am using SE 3310 and its creating different device ids for each node sharing it . since I will be building a RAC enviornment I need these IDs/name to be same .
for example on one node the lun id is /dev/rdsk/c3t0d0s6 but the same lun id on node 2 is /dev/rdsk/c2t0d0s6.
In past with an old storage array I fixed this issue by creating links in /dev/rdsk for c3t0d0s6 ---> c2t0d0s6.
my question is : is there a way in SE3310 that device ids get created with same name or do i still have to rely on creating these soft links ?
thanks
Note: since i need the answer to this quickly i will wait a while and then post this question in other forums and i will update the question here with the answer .

This could be a Solaris (I presumed) O.S. question rather than SE3310 or storage question.
The logical device (/dev/[r]dsk/*) is the work of the O.S. when it first configures the device, in this case the LUN from your SE3310.   I can go in depth on how the cX number happens (due to device probe order, driver differences, history of device discovery due to need of persistent device naming, etc...) but ... it's a really long story and is really quite irrelevant and most people should not be interested...
If you have COMPLETELY identical servers, i.e. identical hardware down to specific HBA in specific slot are the same,   and if you make sure that luns are presented to all servers exactly the same way, same order, and any changes are seen by all servers in the same sequence, in theory, all /dev/rdsk/* devices will be consistent across servers.
But that's still rather irrelevant.    Application that is designed to work in a redundant environment should not be dependent on logical devices like /dev/rdsk being the same.
So ... in effect this is also not a question for the Solaris forum, but rather a question for those familiar with RAC, how to configure such that device access is done "safely" through actually identifying the lun rather than assuming /dev/rdsk are consistent.

How to create two employees with same name as supplier record?

Dear all,
We need to create a supplier record for an employee so that we can issue invoice for pretty cash payment. If there are 2 employees with same name, how can we create supplier records for these 2 employees? The system does not allow duplicate supplier name.
Please advise.
Regards,
HY

Hello,
In R12 it is possible to create 2 employee with same name but different employee number.
And also possible to create these 2 employees as suppliers in Payables.
HTH,
Vik

While saving multiple attachments from mail, files with same name are added and not replaced

While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

Bjørn Larsen a écrit:
Hi all
Hope to get some help with Elements Organizer.
I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

How to send File with Same name to Receiver

HI Frnds,
In my peoject i have one scenario,
I have to access Orders is the name of file , available in FTP Server, i have to send same file to Receiver side with same name Orders
Is it possible with same name dynamically??
Regards,
Raj

hi,
You have to go for variable substitution option available in receiver file adapter,but for that you have to get the file name in receiver payload.
http://help.sap.com/saphelp_NW04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
these links are also helpful
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
/people/sriram.vasudevan3/blog/2005/11/21/effective-xsl-for-multimapping-getting-source-filenames-in-legacy-legacy-scenarios
regards,
ujjwal kumar

How to create directories with same name in different schemas

I have two schemas on the same database.
I am trying to create directories with same name, but different paths in both the schemas.
When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
Is there any solution to create directories with same name, but different path in two different schemas on the same database.
Thanks,
Sridhar.

Hi,
>>When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
If you have removed the REPLACE clause of your create statement, then you would see that is not possible.
SYSTEM> connect scott/tiger
Connected.
SCOTT> create directory mydir as '/tmp';
Directory created.
SCOTT> connect legatti/pwd
Connected.
LEGATTI> create directory mydir as '/tmp';
create directory mydir as '/tmp'
ERROR at line 1:
ORA-00955: name is already used by an existing object
LEGATTI> select owner,object_name,object_type,created
2 from dba_objects where object_name='MYDIR';
OWNER OBJECT_NAME OBJECT_TYPE CREATED
SYS MYDIR DIRECTORY 19/12/2007Cheers
Legatti

How to create logical directories with same name on two databases

Hi,
OS: Windows
Oracle Version : 10g
I have to databases in one oracle home. I have created some logical directories in one database. When I am trying to create logical directories with same name in another database, it is overwriting the first database directory paths with the second one
Can't we create directories with same name but different path in two databases on one machine?
Pls suggest me on this
Regards,
Vijay

I am trying to create logical directory using CREATE
DIRECTORY statement. I am very much aware that the
create directory statement doesn't create directory
on OS. But we can attach the physical directory on OS
to logical directory in oracle
My requirement is to create logical directories in
oracle mapping the OS directories. Both the
databases, wil have same logical directory names but
different OS directory mappingsIf I understand you correctly, you can do this:
On DB 1
CREATE OR REPLACE DIRECTORY same_dir_name as 'C:\myoracle\mydir1';
On DB 2
CREATE OR REPLACE DIRECTORY same_dir_name as 'D:\myoracle\mydir2';
What stops you from doing that ?
Note: If what you have is one database but different connections, then you are connecting to one database. The above second statement will drop and replace with the first one

Script to find files with same names with in a folder and it sub folders.

Looking for script to find files with same names with in a folder and it sub folders.

Are you just looking to find if any two files underneath a folder have the same name?
If you just want to know that a file named "whatever" exists in two folders, that's not too difficult, but you probably want to know the full path names.
Here's one attempt:
$ perl -MFile::Find -le 'find(\&w, "."); while (($n,$p)=each %file) {if(@{$p}>1){print join(" ",@{$p})}} sub w{push @{$file{$_}},$File::Find::name;}'That will print the pathnames on the same line of any files with the same name that appear anywhere underneath your current directory.
It's a bit long for a "one-liner", but functional.
Darren

Static Files with same name. How does apex determine which files to serve?

Hello, I'm using apex 4.2.1.00.08 and I cannot figure out how apex manages the static files and cannot find any help in the docs (other that some high level UI description).
The application is serving some file and I cannot find which one it is in any easy way.
I have a workspace where there are several files that have the same name, and I cannot understand how apex figures out which one to serve, and also don't understand what is value of associating a file with an application.
There are files associated with application 0, which don't appear to show up in the "shared components", but can be seen as
SELECT *
FROM wwv_flow_files
WHERE flow_id = 0;
and can apparently only be deleted using "SQL Commands" inside apex.
the URL called is something like
wwv_flow_file_mgr.get_file?p_security_group_id=13498126233076320&p_fname=myfile.css
so apparently the only parameters that matter are the workspace and the file name. The associated application is irrelevant.
apparently files linked to flow_id 0 have precedence over all the other files ...
Thanks for clearing up a bit of "fog" on this issue.

VC wrote:
Go to that application > shared components > Static files you should see the file.the problem is that there are multiple files with that name, and that sometimes the file being served is linked to application "0" and it doesn't show in the "shared components" interface ...
I have a workspace where there are several files that have the same name, and I cannot understand how apex figures out which one to serve, and also don't understand what is value of associating a file with an application.Static files can be uploaded to apex with optionally associating with an application within that workspace.
Files associated with an application are referenced using *#APP_IMAGES#*
Files not associated with an application are referenced using *#WORKSPACE_IMAGES#*I referenced with #WORKSPACE_IMAGES#, but now I see that if I use #APP_IMAGES# the URL generated will also contain the application ID. This would help to discriminate between different files with the same name but linked to different applications ...
There are files associated with application 0, which don't appear to show up in the "shared components", but can be seen asWhy are you particularly interested in application 0?Because somehow APEX puts the files that I uploaded there ... they can be seen selecting from wwv_flow_files. Do they take precedence over all other files with the same name?
Filename is unique for the given workspace[and application]I disagree. I have multiple files with the same name ... the root of this problem ...
so apparently the only parameters that matter are the workspace and the file name. The associated application is irrelevant.How is your static file referenced??
But not always, try associating an static file with and application and reference it using #APP_IMAGES# instead of #WORKSPACE_IMAGES#
See
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_sub.htm#BEIDCGAJ
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/ui_file_manage.htm#HTMDB06011
Thanks, but the documentation doesn't give much details ... apparently files referenced with #WORKSPACE_IMAGES# can still resolve to files linked to specific applications ... I would like to understand the actual workflow for the various cases (file references with APP_IMAGES, referenced with WORKSPACE_IMAGES, file associated with the application, with another application, with no application, with application "0" ...).
Also, I find it somewhat misleading that you can have files associate with applications that don't exist anymore (e.g. have been deleted).
Edited by: GChierico on Apr 11, 2013 2:16 PM

Help - loading updated files with same name

CS4
When updating files with same name my CS4 automatically puts an extension _000
I think it should ask me if I want to replace the existing file. Is there a switch or setting that I need to change?
Thanks.
Alan

Please find the solution in thread, http://forums.adobe.com/thread/707897?tstart=0.
Hope this helps you.

Creating file on network with same name

Similar Messages

Maybe you are looking for