Creating job, ran successfuly, but not seen on dba_scheduler_jobs

Hello working on 10g standard Edition on windows, I'm created an inline job but to execute an OS commend, but this doesn't show up why?
conn dev@souceb
Example:
begin
dbms_scheduler.create_job(job_name =>'EXEMPLE',job_type =>'executable',enabled => true,start_date => SYSTIMESTAMP,job_action =>'c:\temp\cp.cmd');
end;
PL/SQL procedure successfully completed.
SQL> select job_name from dba_scheduler_jobs;
JOB_NAME
AUTO_SPACE_ADVISOR_JOB
GATHER_STATS_JOB
FGR$AUTOPURGE_JOB
PURGE_LOG
RLM$SCHDNEGACTION
RLM$EVTCLEANUP
RS_RESTRICT_ACCESS_90DAYS_JOB
the job EXEMPLE doesn't show up, and when Itry to launch the job, I have the following error
EXEC DBMS_SCHEDULER.RUN_JOB('EXEMPLE',TRUE);
ERROR at line 1:
ORA-27475: "DEV.EXEMPLE" must be a job
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1
Could someone helps me for this?
Thanks

I don't what really is going on with my system but the creation of the job works fine, but I'm getting this error:
SQL> EXEC DBMS_SCHEDULER.RUN_JOB ('MYJOB');
BEGIN DBMS_SCHEDULER.RUN_JOB ('MYJOB'); END;
ERROR at line 1:
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing execution agent failed with
status: 2
ORA-27301: OS failure message: The system cannot find the file specified.
ORA-27302: failure occurred at: sjsec 6a
ORA-27303: additional information: The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1
other reason gotten from the dba_scheduler_job_run_details:
select status,run_duration,session_id,additional_info from dba_SCHEDULER_JOB_RUN_DETAILS where job_name='MYJOB';
ORA-27370: job slave failed to launch a job of type
EXECUTABLE
ORA-27300: OS system dependent operation:accessing
execution agent failed with status: 2
ORA-27301: OS failure message:
The system cannot find the file specified.
ORA-27302: failure occurred at: sjsec 6a
ORA-27303: additional information: The system cann
ot find the file specified.
Any tips?
Thanks

Similar Messages

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.

Creating an OSB cluster but not with Configuration Wizard

Hi experts,
I would like to create an OSB cluster but not with Configuration Wizard. So my scenario for creating OSB cluster is:
- create an AdminServer with Configuration Wizard
- log into Administration Console and create two machines and a cluster
- start node managers
- configuration for starting servers automatically with node managers
After these steps I have a cluster with 2 managed servers which will start with the node manager. However these managed servers are appropriate for deploying normal Java applications but not OSB components...
My questions is what should I do with these managed servers to be able to deploy OSB components onto them?
Or can I create an OSB domain only with Configuration Wizard?
Thanks,
V.
Edited by: RickFlair on May 13, 2012 1:10 PM

Hi Pierluigi,
Thanks for the answer!
When I created the domain (with Configuration Wizard) I could set that the domain should be an OSB domain so I think I don't need this template afterwards.
If I create an OSB domain (with Configuration Wizard) with one AdminServer in it and later I add managed servers on the admin console then I get this message on the OSB Administration Console: Unable to obtain metrics data from the server. It means that something is wrong with the managed servers I can't use them properly.
However if I create an AdminServer and managed servers with Configuration Wizard then I don't get this error (or warning?) message.
Could you help me why it is?
Thanks,
V.

¿Dear Sirs, I can create with "Photoshop Elements 12", a PDF file of several pages?. I can create a "pdf" file, but not of several pages. Thank you

¿Dear Sirs,
I can create with "Photoshop Elements 12", a PDF file of several pages?.
I can create a "pdf" file, but not of several pages.
Thank you
Valentín Uriarte

This is the Photoshop Elements forum.
If you are using Acrobat, ask Here:
Acrobat

I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. any suggestions

I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. I have triple checked my email address and all Apple account info, all of which are correct. Any suggestions?

Where are you trying to create it?
Go to appleid.apple.com and create it there. Type the country name in the space and a dropdown should appear. Nigeria is clearly available there.

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not enough space?

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?

Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion.

HT2731 Created Apple ID. But Not able to verify. Verification mail is sent on Apple ID and do not know how to check mails in mail box .

Created Apple ID. But Not able to verify. Verification mail is sent on Apple ID and do not know how to check mails in mail box .

The verification email will have been sent to the email account that you put as the primary email address on the account - log into that email account as you usually do and you should have an email from Apple.

Text seen in swf file but not seen in flash pro. publish

I am using fmath formula component for flash. when i push ctrl+enter, texts in formula object are not seen, there is only tiny squareroot symbol. however, when i open created swf file, everything seems normal. I use flash player version 11.2. . Also, everything is ok in version 9.
http://www.fmath.info/flash/download.jsp

Are you setting the font that is being used to display the formula yourself? If so is it properly embedded and issued to the component properly? A quick way to check is to use a known system front (Arial, _sans, etc) and see if text shows up. If it does you're just not either embedding properly or aren't pointing to the font correctly in the component.

GR slip for PO created in Material document but not printed or in spool

Hello Inventory Management Gurus,
I have a problem printing GR slip onto the printer.
I am able to create the output and can see in the material document but not in the spool or printer.
I configured GR slip printing in OMJ4, created condition record in MN21 configured in NACE etc., for the output type.
What is preventing from printing or appearing in the spool if it created the output in material document?
I have the setting "print immediately" enabled and "release after output" unchecked in OMJ4.
What is missing?
Please help.
George

Hi
Output for GR is Printed through T-code 'MB90".
Note - in GRN Individual /Collective Slip and Print indicator should be selected.
Enter the GRN No,Select the Output type and Execute.
Regards
Viru

Resources created w/MQ Admin Console not seen in GF Admin console

Environment:
Glassfish Enterprise Server v2.1
JDK 1.6.0_11-b03 (bundled)
Sun Java(tm) System Message Queue 4.3 (Build 7-g)
Windows XP SP3
Following the documentation in Chapter 1 of the Sun Java System Message Queue 4.1 Administration Guide[1] I used the MQ Admin Console SWING tool to create an ObjectStore with the following properties:
java.naming.provider.url - file:///C:/imq_admin_objects
java.naming.factory.initial - com.sun.jndi.fscontext.RefFSContextFactory
In that object store I created six destinations (3 Queues and 3 Topics) along with one connection factory.
I also used the Admin Console to create one Broker with host set to localhost and primary port set to 7676. Within that broker I created 6 physical destination for the destinations I created in the object store.
In the Glassfish administration console under Configuration -> Java Message Service -> JMS Hosts -> Physical Destinations none of the ones I created in the Broker using the MQ Admin console were visible. I suspected this was due to the fact that GF needs the naming properties I set when I created the ObjectStore with the MQ Admin console so I set them under Configuration -> Java Message Service : Additional Properties. When I did that and restarted the domain the physical destinations I created with the MQ Admin console now showed up in the GF admin console's Physical Destinations section.
However, the ConnectionFactory and Destinations I created in the ObjectStore do not show up in the GF Admin console's Resources -> JMS Resources -> Connection Factories and Resources -> JMS Resources -> Destination Resources respectively. I suspect this is also a case of needing to feed some properties to the domain somewhere but I don't see an obvious place to do so. Nor am I sure what they should be since they need to be scoped to the JMS resource but simply adding a property like java.naming.factory.initial to a more global scope then one affecting only JMS would be 'a bad thing'.
FWIW the GF Enterprise Server 2.1 Administration Guide [2], Chapter 4 - Configuring Java Message Service Resources does not touch on this subject either.
TIA,
-NBW
[1] http://docs.sun.com/app/docs/doc/819-7755/gcrlv?a=view
[2] http://docs.sun.com/app/docs/doc/820-4335/abljw?a=view
Edited by: NBW-2009 on May 27, 2009 1:24 PM

You might want to check with the glassfish/application server forum first
http://forums.sun.com/category.jspa?categoryID=109
-Mathi

Seen but not seen

Network available but can't be found in Assistant or Admin Utility.
My network went down and I had to reset the router at which point it came back up, however neither Assistant or Admin Utility can find it.
Currently the network is seen and operation on all the computers via Internet Connect.
I reinstalled Airport Extreme from the CD, version 4.2, however there has been no change. Software update indicates that I'm running the latest version.
I have a recent backup from Airport Admin which I can open but I can't do anything with it other than look at it, meaning that the import option is greyed out in the Airport Admin window.
Because the router can't be found even after rescanning I can punch "OTHER" and put in the working network's password and hence can access settings. I can do a minor change like select another channel and then hit "Update" which seems to do an update however the Base station is still not found in Admin. It is found in Airport Setup Assistant which says" The Airport Setup Assistant has found an Airport Base Station ( the current operating one) and asks me to proceed, I click continue and nothing happens.
I've repaired permissions with no result, I've verified Disk, again without showing errors or solving the problem.

Solved, but not in the way I would have hoped.
I run another computer out in the studio, essentially this is was a clone, though it has sort of gone off on it's own way, however it does have access to the Base Station.
From that machine my Base station was properly recognized and from there I updated the base station thru the Airport Setup Assistant. It is now recognized in both the Airport Utility and the Airport Setup Assistant.
So, it's fixed, but for the benefit of others who are not so fortunate to have a running clone hanging around I'd like to know what is going on.
I should add that I have a backup clone connected to the main machine. This should have had an full system from a couple of days ago. When I booted off that clone, before I solved the problem, the problem was still there. I'm trying to figure out what that means. I assume that perhaps it is a hardware problem with the internal airport card which would cause the clone to also lose the base station?

Time machine backups present on disk but not seen

Hi. I just notice that on my macbookpro time machine is keeping creating the hourly backups, but I cannot see them anymore from the time machine interface.
All backup files seem to be on the disk, but whenever I enter the time machine I can only see the last one, as if I started the time machine for the first time.
Any idea why this is happening? And, more important, any idea on how to fix it?
I'm on a macbook pro with OS X 10.8.5; the time machine files are stored in an external USB disk.
Thank you for your support.

shuusaku wrote:
Hi. I just notice that on my macbookpro time machine is keeping creating the hourly backups, but I cannot see them anymore from the time machine interface.
All backup files seem to be on the disk, but whenever I enter the time machine I can only see the last one, as if I started the time machine for the first time.
Any idea why this is happening? And, more important, any idea on how to fix it?
I'm on a macbook pro with OS X 10.8.5; the time machine files are stored in an external USB disk.
Thank you for your support.
My TM did this after the upgrade to 10.9
When I first set it up, I just clicked to use the same drive I had been using, even though I'd just formatted it.
Apparently that causes the backups not to appear in the app.
So, here's what finally resolved it. I:
1. Opened Time Machine Preferences.
2. Turned Time Machine off.
3. Clicked "Select Disk...".
4. DELETED the TM disk I had previously selected.
5. Reformatted the TM disk once again.
6. Reopened Time Machine Preferences.
7. Reselected the newly formatted disk from the list.
8. Turned Time Machine back on, and let it begin backing up.
When I opened it the next morning, I had seven backups in the app to choose from.

Audio Tracks can be Heard but not Seen

I am using Logic Studio 9 and in Logic Pro all the sudden I have had a problem with my audio tracks. When I record the tracks I can see the track audio waves being cut but once I hit stop the track visual go to a straight line with no feature. If I back up the play head and press play I can hear the audio of the track, but not see it. I can even bounce the track and use it in iTunes or WaveBurner, but still I cannot see the track visual info. This just recently started. ANY ANSWERS to this mystery would be greatly appreciated.
Thanks

http://discussions.apple.com/thread.jspa?threadID=2371889&tstart=0

Flash is installed ,but not seen by Chrome or Firefox

Here is what I checked in Chrome , I have:
Adobe Flash Player - Version: 15.0.0.189
Shockwave Flash 15.0 r0
This is installed but not being recognized by either firefox or chrome. I am on a WIN 8.1 pc and IE does not work so it is disabled/turned off. It does not even open anyway. How do I fix this?

Let me clarify, I need flash to work in Firefox and Chrome, IE is not important. I rarely use it

Ipod can be seen by Windows 7, but not seen by Itunes.

Hi - A friend has a Dell laptop running Windows 7. It was recently in the shop to remove a virus. Everything now works fine, except it won't work with any of her ipods. The ipods can be seen under Devices and Printers, and by the Device Manager. They aappear to be associated with the correct drivers. But if I select to view the properties using Device Manager, the spinning wheel cursor appears, and the Device Manager.stops responding. The laptop also will stall in the shutdown process, if the ipod is connected. Disconnecting the ipod at that point, causes the laptop to finish shutting down.
I should mention that an ipad works fine with Itunes on the laptop.
I have reinstalled the Itunes drivers and software several times. I've put the ipod into disk mode, also tried a different ipod cable, and neither helped. I've run virus scans using different anti-virus software, but they don't find anything wrong. I'm able to use the same ipods on a different Dell laptop that is also running Windows 7, so I don't think the ipods are a problem.
Nothing else on the laptop seems to be broken. Everything else works. Other USB devices work fine, so I don't think it's a USB issue.
The next step appears to be to reinstall the operating system. But I would like to know if there is anything else worth trying before doing that.
Thanks. - Mark

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Creating job, ran successfuly, but not seen on dba_scheduler_jobs

Similar Messages

Maybe you are looking for