Creating Multiple Response Questions.....

Hi.
I'm looking at updating a load of Java Applets here at work
accross to Flash.
I'm not looking at using the quiz templates but wondered if
anyone can help me out?
Basically I need to create a multiple response question using
an xml file and was wondering on the best way to achieve this?
Any help would be much appreciated.

I need to use an xml file for the questions and answers.
And there are more than 1 correct answer for the questions.
I'm pretty new to actionscript so a few pointers in the right
direction would be a great help to me.
Should I be using the xml component? The dataset components?
Check box components for the questions?
How do I get the xml to interact with the flash.... sorry for
all the questions.

Similar Messages

Creating multiple response instances.

I have created a jsp through which i can download a jar on to my cell.
My requirement is first to send a wml to the client and then start downloading
the jar file. But, i am able to display the wml file but not able to download the jar
file.
[b]this is code i am using to send the wml file:
response.setContentType("text/vnd.wap.wml");
RequestDispatcher viewPage_sucess1=request.getRequestDispatcher("/sucess.wml");
viewPage_sucess1.forward(request,response);
this is code i am using to download the jar file:
response.setContentType("application/vnd.symbian.install");
            String disHeader = "Attachment;Filename=" + fileName ;
            response.setHeader("DownloadFile",disHeader);
            path="/".concat(path);
            System.out.println("NEW PATH----------------------------->>>"+path);
            file = new File(path);
            out.clear();
            out=pageContext.pushBody();
            fileInputStream = new FileInputStream(file);
            int i;
            while ((i=fileInputStream.read())!=-1) {
                response.getOutputStream().write(i);
            response.getOutputStream().flush();
            if i try download the jar without the wml file, it works fine.
can anyone please suggest me what to do. Is problem due to response
object. how would solve this problem.

I need to use an xml file for the questions and answers.
And there are more than 1 correct answer for the questions.
I'm pretty new to actionscript so a few pointers in the right
direction would be a great help to me.
Should I be using the xml component? The dataset components?
Check box components for the questions?
How do I get the xml to interact with the flash.... sorry for
all the questions.

Multiple response quiz answers changing to single response

I am experiencing a funny problem with multiple response
questions. Sometimes when I launch a project with a quiz- the
multiple response questions are suddenly changing to single
respones - even the button changes from the squares - to the round
radio buttons. I go back and check and everything is set up
correctly - the multiple responses are all checked and it previews
correctly.
It seems to randomly happen only occasionally on all my
projects - I can't recreate it as it will just happen sometimes.
Does anyone know if this is a common problem - or how to fix
it.
I'm on Captivate version 2
Thanks
Nat

Have you checked for any updates for Captivate 2? It could be
a bug that an update can remedy.

Multiple Response Sheets for one form

Hello,
Can anyone tell me how to create multiple response sheets for the same form?
For example, my sales team needs to send the form out to different companies, but needs their responses sepearted to analyze.
Please Help!

Hi,
You can only have one active Response Sheet per form, this means that while you are using the same form for different companies, the responses that everyone submits will go to this one response sheet.
However, if you just want to add other sheets in the 'View Responses' tab, for backing up data or other purposes, you can select Insert menu/Sheet in the 'View Responses' tab
In your case, it sounds like you need a form per company or you can use one form and have a field requesting the user to enter the company name (or you can have a drop down for the user to select a predefined list of companies) and then once you received all the responses, you can sort or filter the responses in the table based on the company name, for example. Or export your responses in Excel format, and do the analysis there.
thanks,
Lucia

Can I separate out for analysis multiple responses to one question?

I created my first survey without realizing that by creating a question that allows the respondent to choose multiple responses, I might have a problem parsing out the responses for analysis. I have been downloading (exporting) the responses into an Excel file; however, all choices made by each person for that question gets exported into one Excel cell as one long text string. So how can I do anything with this data?
Sure, the Summary Report provides a nice bar chart showing the number of occurrences for each possible choice out of the several I created for the question; however, it appear that I can't get this data into my SPSS to do cross-tabs without going through some crazy impossibly labor-intensive mapping of every one of my hundreds of survey responses. Am I wrong? Is there some way to do this as I can in SurveyMonkey?

We don't support this directly. This post explains a potential work around: http://forums.adobe.com/message/3869111
Randy

Partial-credit scoring in multiple response and multiple hot-spot questions

Hello everyone,
I'm calling on your generosity in the spirit of the holidays to help out a noob. I would like to create matching, multiple-response and multiple-hot spot questions where the user receives credit based on the number of correct answers within the question. For example, in a matching question where there are four items; if the user gets 2 out of the four items matched correctly, I would like for him to receive 2 out of 4 points.
I understand that Captivate doesn't support partial-credit scoring of this type, but a few posts have implied that it can be done with variables. Is there anyone who can walk me through this process, or send me to a link that will walk me through it? (I've scoured these forums and tried the Cp tutorials, to no avail.) And if it's not asking too much, please make it understandable to someone who has very little experience with variables.
Thanks, and Merry Christmas.
JR
(Running CP 5 on Windows Vista)

Hello,
I did publish an article more specific on partial scoring, perhaps this could help you:
Partial scores and customized feedback
And since you are asking for more basic information, on my blog I point to some other articles to explain the meaning of variables with/without advanced actions. Feel free to have a look (there are more postings about advanced actions and links to articles over there):
Curious about variables ?
Unleash the power of variables with advanced actions
Lilybiri

What could be causing my multiple response survey question to show a non-response in LMS report?

I have a 10 question survey that has been running fine and providing accurate responses in reports generated from my LMS. I made a property change to a multiple response type question that is now causing the reports to show a date/time (2003-01-01 18:00:00) response instead of the actual multiple responses the user made. The change I made to the question was to change the "Numbers property from" [ a), b), c) ] to [ 1), 2), 3) ]. This property change did not affect the reported responses for the single response questions, only the multi-response. This problem occured Using Captivate 4. I then tried using the same properties in Captivate 5.5 thinking it was a bug in CP4, but got the same results. Has anyone else run into this issue? I'm going to bring this to the attention of my LMS provider, but want to make sure CP is clean first.
Thanks,
Dave

First things first. I am not an LMS expert, so this is not about troubleshooting.
However, to ensure that your course works fine on a SCORM-compliant LMS, you can upload it to cloud.scorm.com and test it out. If the course works fine there, rest assured that it will work fine on any SCORM-compliant LMS. If your LMS team comes back with an issue after this, you can counter them with this evidence that the problem is with the LMS and not your course.
Sreekanth

Bash script question, how do I create multiple directories on one line

I am making a package for amavisd-new (yes I am aware that there is one in community but I can't say I like the way it is done).
I have an install script from which I want to create multiple directories if they do not exist.
So I want to create a directory /var/spool/amavis with subdirectories of var tmp virusmails spammassassin .
I can't seem to be able to find a way to do this on one line.

pelle.k wrote:
peets wrote:Hehe because it's less typing!
Good one!
Also, it's by far the more dynamic method.
If you want to get pedantic, it's also far less efficient in terms of execution time: each iteration of the loop forks a new process, whereas using a single mkdir command forks only once. The "best" way is the curly-braces method demonstrated above by chimeric.

Question about creating multiple output files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

You can write a shell script to generate the multiple spools files for the same output. Below script may helps you.
#====================
#!/bin/bash
n=0
while [ $n -le 20 ]
do
n=`expr $n + 1`
sqlplus -s system/manager <<EOF
spool emp_dept_$n.xml
select count(1) from tab;
spool off
EOF
done
#====================

Question about creating multiple XML files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
We are using DBMS_XMLGEN package to generate XML.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

one solution i can think of is to use SQLX operator instead of dbms_xmlgen.
here is a sample example.
declare
l_xmltype xmltype;
l_deptno emp.deptno%type;
begin
for i in (select * from emp order by deptno)
loop
    select xmlconcat(
                xmlelement("ename", i.ename)
               ,xmlelement("sal", i.sal)
               ,xmlelement("detpno", i.deptno))
      into l_xmltype from dual;
    dbms_output.put_line(l_xmltype.GetClobVal());
end loop;
end;
/Now here you can open the query once, keep writing to the file till the deptno
is same, when the deptno changes, close the file and open a new file with new
deptno and start writing.
Note : in this way you will have to add the xmlprolog manually to each of the file which should not be an issue. after opening the file add the prolog string manually.
Hope this helps.

How can I create multiple pages, with different layouts to the others, in DW fluid grid layouts?

Hi everyone, : )
I am creating a website using FGL in DW CS6, v12.0 build 5808. I do not have Creative Cloud (do you have to pay to use this service?).
I have created one layout for my home page.
I would like to create several more pages, but I want them to use different layouts (as well as different content).
I tried to do something similar before using 'save as' (this was with a non-FGL), but whenever I changed the original page that I had 'save as'd' from, the layout in all the other pages would change too!
I found a possibility from someone else online suggesting using a template, but have not tried it yet: http://www.linkedin.com/groups/Adding-second-fluid-page-in-119937.S.192422240
I'm a bit scared of breaking everything, as I am new to web design and have had to restart the whole process a few times due to messing up the fluid.css etc and other issues, so I am taking baby steps.
Happy to try whatever's suggested and, while I wait for (I hope) your responses, I think I will try the template thing, but from the reply the person who asked the question gave, it sounds like his subsequent pages changed too, as I mentioned above? *scared* ; )
If anyone can help me with this query I would be very grateful. Thank you! : )

Thanks David.
I tried using different IDs for the other pages, but eventually one of the divs seems to 'break' - it overlaps other divs, or cannot be moved or resized (you can select the outline and it goes blue, but no 'move up a row' or down a row or 'lock to grid' etc icons appear and it can't be drag-re-sized), plus the green overlay disappears (just from that div. I'm aware of how to turn visual aids on and off), so it seems broken. This often seems to happen if you rename a div once it's been created; it does not rename in the layout.css on the right side panel (CSS Styles) in DW and the 'broken' behaviour above is exhibited. Do you know anything about this? Is this the 'edit this doc at your peril' stuff that most tutorials seem to mention? Am I doing something wrong?
I also tried making an FGL and saving out the original boilerplate.css, layout.css and respond.js. Then created multiple new FGLs and each time it created new versions of layout.css (called 'untitled-1', 2 etc.). Once I had created all the FGLs, I deleted all the new boilerplates and untitled.css files. Then restored the original ones and changed the link at the top of each page's html to refer to the same filename (the original layout.css), rather than untitled.css. I thought this might work and it seemed to for a while, but then as I had to add new div names for the sections on each page, it eventually broke (as above).
Anyway, I think you have a good point about different layouts and it occurred to me also while I was exploring and waiting for replies here. I think I will make one layout for all pages and go with that. I have a couple of questions about that though:
1. I think the max number of divs I want for one of the pages is 10, but some pages need less divs. If I only fill e.g. 8 divs on one page, will the other ones be sat there empty? I think they will actually...I guess I'm asking because I have not tried it yet (will do after this) and it takes so long to do this trial and error.
2. If the amount of content in each div is different, e.g. let's say Page 1 has 6 lines of content in div1, but page 2 may have an unlimited amount of content (I will want to add to it in the future). Will this result in the div on page 1 being a huge block of empty space after its 6 lines?
Thanks so much for your help!

Possible to create "multiple" "snapshot" folders in Photo app?

I mastered the whole "Hold both buttons to take a screenshot" idea. However, all screenshots are saved in one "saved pictures" folder under the "albums" tab. Any way to make multiple folders? Say, by date or website or.... anything?
I know I can make mutliple folders in iTunes and import them. I'm talking about creating multiple screenshot folders on the iPad itself.
Also, is there any way to turn off the "Picture frame" flower that comes up on the main screen when powering down? I don't want anyone to be able to just hit that and start a slideshow.
And...(I tried to put all my "picture questions" in one topic).... Can I load a different picture to each App page? I have one picture on my lock screen and all my "App" pages have a 2nd pic. Can I put a seperate pic background on each of the 11 (or how ever many the max is) app "home" pages?

Regards creating different folders for different groups of screen shots the only way to do that is to move all the screen shots to your computer, put them in separate folders and then sync them back to the iPad.
In response to your question about using different backgrounds for different app pages the answer is no. In essence you're not actually switching pages it's just the group of app icons that are changing. In other words the background remains static when you swipe to move to the next so called page of icons.
Message was edited by: Mr.C UK

Why does Scheduling Agreements create multiple deliveries?

Hello SAP Experts,
We are on 4.7c. Our scheduling agreements automatically create deliveries; and I was wondering why instead of putting the scheduled lines onto one delivery, it automatically creates multiple deliveries for the scheduling agreements.
Could someone please explain this to me? Thank you for your time.
Best Regards,
WC

Hello,
Thank you for response. I checked the settings and they are correct.
In addition, I checked to make sure the Scheduling Agreement Header Details had the "Order Combination" box checked, which will allow multiple scheduling agreements to be combined in one delivery.
Our scheduling agreement runs on the weekends where it automatically creates the deliveries for them.
My question is why do the scheduling agreements with the "Order Combination" box checked do not always put the scheduling agreements into one delivery. but separates them, when they are in the same automated run.
For example:
Scheduling Agreement 0001 through 0045 will be created on Delivery 100001, but Scheduling Agreements 0046 though 0048 will be created on Delivery 100002...and they both have the order combination selected.
Why is Scheduling Agreements 0046 through 0048, not automatically creating on Delivery 100001 as the other scheduling agreements?
Thank you for your time!
Best regards,
WC

Why do Scheduling Agreements create multiple deliveries?

Hello SAP Experts,
We are on 4.7c. Our scheduling agreements automatically create deliveries; and I was wondering why instead of putting the scheduled lines onto one delivery, it automatically creates multiple deliveries for the scheduling agreements.
Could someone please explain this to me? Thank you for your time.
Best Regards,
WC

Hello,
Thank you for response. I checked the settings and they are correct.
In addition, I checked to make sure the Scheduling Agreement Header Details had the "Order Combination" box checked, which will allow multiple scheduling agreements to be combined in one delivery.
Our scheduling agreement runs on the weekends where it automatically creates the deliveries for them.
My question is why do the scheduling agreements with the "Order Combination" box checked do not always put the scheduling agreements into one delivery. but separates them, when they are in the same automated run.
For example:
Scheduling Agreement 0001 through 0045 will be created on Delivery 100001, but Scheduling Agreements 0046 though 0048 will be created on Delivery 100002...and they both have the order combination selected.
Why is Scheduling Agreements 0046 through 0048, not automatically creating on Delivery 100001 as the other scheduling agreements?
Thank you for your time!
Best regards,
WC

HANA XSODATA Create multiple entities with associations in single LUW

Hi all,
Is it possible to create multiple entities with associations in a single LUW.
For e.g. we have a Sales Order and Item. This is modelled as 2 DB tables and 2 entities.
In XSOData I have defined association relationship between them.My XSOData definition is like this...
"XSDemo.DB::SO"    as "SalesOrder"
   navigates ("SalesOrder_OrderItem" as "SOItem");
   "XSDemo.DB::ITEM" as "OrderItem";
   association "SalesOrder_OrderItem" principal "SalesOrder"("OrderID") multiplicity "1"
   dependent "OrderItem"("OrderID") multiplicity "*";
My post URI is
http://server:port/SODemo.xsodata/SalesOrder
My data is as follows
"ID": 1,
"Customer": 123,
"Desc": "Test SO",
"SOItem": [
      "Material": "MAT1",
      "Qty": "10",
      "Item": "10"
      "Material": "MAT2",
      "Qty": "20",
      "Item": "5"
From the post, I get a response 201 (Created). However, only the Sales Order is created. The Items are not created.
My question is:
1. Is it possible to create Order and Item together in a single post call ?? If yes, how. What is the syntax of XSOData / Post Request
2. If it is not possible to create Order and Item together in a single post call, then how do we ensure atomicity of the transaction.
For e.g. What is Order creation is success and then the Item creation fails ...
How can we ensure that all is committed or none is committed.
3. From the documentation I understand that this might be possible using modification exits... However, I want to achieve this without using modification exits...
Is this possible or not ?

Hi Thomas,
Actually the problem is that Sales Order and Order Items are modeled as different entities... So, XSOData allows creation of Sales Order Item independently WITHOUT creation of a sales order header.
For e.g. URL : http://server:port/SODemo.xsodata/OrderItem
Ideally, the XSOData should implement a logic that a Dependent entity cannot be created without a Principal entity.
For e.g. using a Sales order BAPI you cannot create a sales order item alone !
Similarily, since XSOData is the end point service for the consumer, the XSOData should have the logic to ensure that both principal and dependent entities are created together.
Otherwise, in the UI the developer has to ensure that the post body is build correctly...

Creating Multiple Response Questions.....

Similar Messages

Maybe you are looking for