Creating NTSC DVD in DVDStudio Pro from PAL material

I am UK based and normally work in PAL. I have used Final Cut Pro v5 and DVD Studio Pro v 4 quite a bit for making PAL DVDs and am pretty comfortable with the process.
But I now need to create an NTSC DVD and make copies to be played in the US. . The end product is a DVD, with a menu and twelve, chapters each only 1-2 mins long, to send to US clients so needs to look reasonable. I only have to run a few copies so will not be using a duplication/replication facility.
The source material is DVCAM PAL supplied to me as PAL MOVs.
How can I convert the material to NTSC and at what stage in the process do I do this?.
Will I need other software to convert and achieve a reasonable quality DVD?
Is there anyway I can test the final result to see if it is really NTSC?

Hi,
I'm working on transcoding PAL to NTSC. I've been weighing the many pieces of software which seem to do some part of this including Hawkeye, Mpeg2 Works4, Nattress, and even Toast Titanium, but I think I've settled on doing it with Compressor 3, mostly because I already have it, and I read this Macworld article:
http://www.macworld.com/article/49306/2006/02/marchcreate.html
My first question is regarding something Drew said:
"I find converting first to PAL/NTSC in the original Codec then encoding that to m2v seemed to give better results than converting straight from PAL/NTSC to the m2v stream."
I'm not sure what that means. Can you explain a little more about what are you converting and what are you using to convert it?
For my purposes, I'm starting out with a PAL video_ts folder (region free). I've cobbled together a best-guess workflow from sources all over the internet. Would you kindly check this and steer me away from any cliffs?
I can't import the folder directly into compressor, right? So my plan is to use MPeg Slipstream to
1. Open DVD
2. Export a Quicktime movie using the "Apple DV-PAL" settings
Now I have a .mov file which Compressor will recognize, and which I can convert to NTSC by following the directions in the article, right? I don't want the audio or movie length changed, so I think I want to use the traditional method instead of "Slow-PAL". The result will be an NTSC .mov file, right? Will this .mov file contain the dvd menus, subtitles, and alternate audio tracks? Do I need to use DVD Studio Pro to fix anything?
Thanks a lot for your advice.

Similar Messages

Creating NTSC DVD from PAL VHS input

I have a PAL VHS tape that I have just captured in AVI format using a Canopus ADVC-55 bridge. The settings I used in PE10 were DV PAL (as I am in Australia). I am now going to produce a DVD of the footage for use in Australia, but I also need to send a copy to my cousin in the USA, where they use NTSC. The whole PAL/NTSC process confuses me somewhat and I would appreciate some guidance.
1. If I create a PAL DVD for viewing here, is it right that it won't play in a DVD player in the USA? If it won't, can I create a DVD with output settings NTSC even though the input setting was PAL?
2. If I don't create a playable DVD as output, but instead just create an MPEG file and burn the MPEG file to a DVD to be read on a PC, will it read on a PC in the USA?
3. Should I recapture the footage, setting the ADVC-55 to NTSC (rather than PAL), and the project settings to DV NTSC? I have tried this and it seems to work, much to my surprise, as I thought the VHS tape itself was in PAL format and hence would not capture with NTSC settings.

Although most PAL DVD players will play NTSC video -- you are correct that virtually no US NTSC DVD players can play PAL video. And that's true whether you burn a DVD file or an MPEG to a disc. It's a different aspect ratio, resolution and frame rate.
But you can use Share/Computer/AVI with the NTSC DV preset to output an NTSC DV file of your project. Then you can start up an NTSC DV project, load that file into it and burn an NTSC DVD from that.
It won't be perfect. But the program does to a pretty good job of interpretting your video from one format to another.

How to create a photo preview album DVD in DVDStudio Pro ?

Hi,
How can i create a DVD still image ( Photo ) preview with DVDStudio Pro ? The preview should allow the viewer to go back and forth between images in addition to pause and go back to index gallery with the remote control. The final result should be something like a Flash or HTML web image gallery created by LightRoom ( sorry for the F word in APPLE space ). It will be used by elderly users that are not computer saavy but need to proof / preview still photography sessions.
If DVDStudio Pro is not the tool for this, could you recommand a Mac application for this.

iPhoto doesn't run on the iPad. Other than that you'd need to ask your question on the iPad forum.
Regards
TD

Converting NTSC DVD to Blu-ray or PAL DVD

Why doesn't Encore allow me to change a DVD project to a Blu-ray project with the ability to choose the frame size and rate, or to change an NTSC DVD to a PAL DVD? It looks like the option is there, but they are grayed out.
I exported my Premier Pro CS3 project for NTSC DVD, PAL DVD and Blu-ray, hoping to simply change to Encore CS3 project type, and then replace the assets with the appropriate file/format exported from Premier.

>Maybe worth a feature request for CS5?
God in heaven - NO!
As Joe just pointed out, these are 2 completely different TV standards, running on different frame rates at different resolutions.
The results of attempting this "on the fly" with menus etc would very closely resemble a dogs dinner.
>I would therefore guess that you are stuck with copying the menus and other such assets into a new Encore project for each output format.
That won't work.
NTSC is 720x480, PAL is 720x576. They have different PAR as well.
If compliance is what you need, then design your menus in Square Pixels at 720 x 540, and resize the image (in PS) to the required TV standard before importing into Encore. 16/9 is worse, as you need to use different designs for each TV standard. There are no short-cuts.
Asset preparation should be done
i outside
the authoring application, never
i in
it.

Help creating NTSC DVD

Hi all, I'm trying to make a NTSC DVD and I need some advice.
My media was shot as 1920 x 1080 (16 x 9) PAL and I have converted the footage to NTSC using Compressor which has created a default 720 x 480 clip at 29.97 fps.
Is this the standard NTSC format for DVD?
I have created a NTSC iDVD project and have dropped the NTSC media into it and clicked preview.
The footage looks as though it is 4x3 instead of 16x9 - what have I done wrong?
Do I need to change the dimensions of my NTSC media so it will play as 16x9?
Thanks

Thanks, no I've tried dropping the PAL footage directly into a NTSC iDVD project and I don't think there is a conversion happening - maybe someone can confirm this?
Here are the specs from Compressor - what are my other options for 1920x1080 PAL to NTSC footage for DVD?
File Extension: mov
Estimated size: 13.12 GB/hour of source
Audio Encoder
    16-bit Integer (Big Endian), Stereo (L R), 48.000 kHz
Video Encoder
    Format: QT
    Width: 720
    Height: 480
    Pixel aspect ratio: NTSC CCIR 601/DV (16:9)
    Crop: None
    Padding: None
    Frame rate: 29.97
    Frame Controls On:
        Retiming: (Best) High quality Motion Compensated
        Resize Filter: Linear Filter
        Deinterlace Filter: Better (Motion Adaptive)
        Adaptive Details: On
        Antialias: 0
        Detail Level: 0
        Field Output: Same as Source
    Codec Type: DV/DVCPRO - NTSC
    Multi-pass: Off, frame reorder: Off
    Scan Mode: Interlaced
Aspect Ratio: 16:9
    Pixel depth: 24
    Spatial quality: 99
    Min. Spatial quality: 50
    Temporal quality: 0
    Min. temporal quality: 50

Create a DVD using Premiere Pro and Encore - delay between audio and video (in ms)?

I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
Is this even possible with Premiere Pro / with DVDs in general?
My sequence settings in Premiere are:
DV PAL, 25 fps, 720x576 (16:9), D1/DV PAL Widescreen, lower field first, Audio: 48000 Hz
My DVD settings in Encore are:
MPEG-2 (MainConcept MPEG-Video), 720x576, 25 fps, lower field first, Widescreen 16:9 (1,458), Bitrate VBR, 2-Pass, Min 1,5 MBit/s Target 4 MBit/s, Max 9 MBit/s, GOP: M-Frames 3, N-Frames 12, Audio: Dolby Digital, 192 kbit/s

I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
Is this even possible with Premiere Pro / with DVDs in general?
Frame accurate is the best you can achieve and that means 33 milliseconds at best.

Problem creating NTSC DVD

dear all,
I cannot manage to make NTSC DVD with ADOBE ENCORE.
It all went fine with the PAL version. Then I exported mpeg NTSC from the editing programme, which I added to a ENCORE NTSC new file, I added Wav audio files (which is requiered for NTSC in addition to mpeg), and add subtitles in Uff-8. ENCORE first transcodes the audio files, and then "general error" (errore generale in italian). I do not know what is wrong.
I tried to do it without subtitles, but error again.
I deleted the mpeg audio track, and only worked with the Wav. but error again
I add the wav in audio track 2, and linked all files to the audio track 2. But error again.
any idea please?
Thanks and good work!
matthieutje

Drop the MPEG Audio.
It's an optional format in NTSC (and in PAL these days) and not allowed as Audio Stream #1.
Use Dolby Digital or LPCM as Audio Stream 1 instead.

Create NTSC DVD with PAL .avi?

I have a PAL mini DV tape that I had transferred over as a PAL AVI file. When I import the file in imove and export a .MOV it doesn't play on my Apple TV? Do I need to convert the file to NTSC before importing to iMovie or is there a way for iMovie to do it? Thanks!

http://www.nattress.com/Products/standardsconversion/standardsconversion.htm

Is this true?? NTSC dvd projects will play in PAL players

From The "Unofficial" imovie FAQ
http://www.danslagle.com/mac/iMovie/tips_tricks/6017.shtml
States:
The good news is: You can just send an NTSC disc. Any PAL set top DVD player capable of playing DVD-R discs can also play NTSC discs. All that is needed is a fairly new TV, built in the last 8-10 years or so.
So is this true? I can send my project made in idvd to a country that uses PAL and my NTSC project will play?
Thank you for your time.

my Sony TV is 12 years old and does accept the "strange" signal, my DVDplayer (and multinorm VHSplayer) offers while NTSC playback... (colorful pix, stereo audio)
..This has been VERY helpful. ..
as Original Poster of this thread, don't hesitate to make use of the marker functions in this forum...

Can I create a DVD in Premiere Pro?

I found out what format to use for DVDs, but when I exported in that format I got something called an "xmp." It took about two minutes to create it, when creating a mov file takes a lot longer. The xmp doesn't play, either directly on my computer or after I burned it to a DVD. I'm clearly doing something wrong. Do I need another piece of software to make a DVD? It's not complicated, no chapters. I just need a DVD I can send to family members, some of them non-tech people who just want to pop it into their players and watch it.

Rrobin,
For the Export issue, let's start with the version of PrPro (and Encore), that you have, plus the OS version, that you are running.
Then, please let us know what Sequence Setting you are using, the specs. of the Audio & Video on that Sequence, and the approximate Duration of that Sequence.
Last, it appears that you are trying to Export that Sequence, for Import into Encore. If that is correct, please let us know what your Export settings are.
That will be a good start in troubleshooting your issues.
Good luck,
Hunt

Pal DVD to NTSC DVD

I have been working in FCP in Pal. My sequence is HDV I have created Pal DVDs but my client now wants a few copies in NTSC for American clients. Can I create NTSC DVDs from my system?

Click here for information.
(43220)

Will PAL dvd player play my NTSC DVD-r?

I'm trying to figure out if I need to convert several NTSC dvd's into PAL format to send to a friend's mom in Israel (she's very sick and would like to see these soon).
Since I've never converted between these formats, I've been doing lots of research and keep getting more confused. I downloaded JES Deinterlacer (i think thats what its called) but I'm not sure I need it since I read the following on an imovie FAQ website:
"I have an NTSC project and want a PAL DVD.
The good news is: You can just send an NTSC disc. Any PAL set top DVD player capable of playing DVD-R discs can also play NTSC discs. All that is needed is a fairly new TV, built in the last 8-10 years or so."
Could this be true? Can I really just send the NTSC dvd's to her? I hate to waste time here...please help...
Thanks so much in advance.
Jenny

That´s right; NTSC DVDs will always work on PAL players when the player is compliant to the DVD specs. Those players do give out the regular NTSC signal and/or convert to PAL60. Some players can even convert to PAL50. The problem is the TV set.
My German TV is 14 years old and cannot handle PAL60 or NTSC; I would need one of those rare players that convert to PAL50 (usually with poor results).
But NTSC DVDs will always work on a PC (when it is an all-region DVD).

Why are burned DVD's poor quality from the IDVD?

I made a slideshow in iphoto and exported to IDVD so I could burn copies. The show lloked great on screen but the first copies on dvd's were terrible. The quality of images are very poor and seem to be depixilated? Why would the copies be so poor? Does the widescreen or standard have something to do with it??
Help

Hi
There are levels in h*e*l*l*
iDVD - is same as DVD Standard - Interlaced SD-Video
Feeding iDVD progressive or HD material will not improve result but degrade this as from
- iMovie'08 to 11 - as they can not deliver - but only every second line of the picture
- iDVD downscaling from HD - is doing a bad job
So by using a program that can deliver - best possibly DVD is the result
- iMovie HD6
- FinalCut any version
- FotoMagico™ - (for SlideShows)
If this is not enough - then DVD is no option as HD-DVD is rare and needs special HD-DVD-players - alt
• Blu-Ray e.g. from Roxio Toast™ but still needs BD-Player as PlayStation3 etc
• out in high quality to USB-memory to be played on device that can do this
• Play via MacBook and out to a HD-projector/TV
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

AVCHD file to create a DVD

Hi,
I need to create a DVD with menus from several AVCHD files.
After a bit of fluffing around I ended up importing the files direct from my camcorder into iMovie.
I then did my editing (pretty much just trimming both ends of the various clips). Have then gone to Share-MediaBrowser-Create 720p movie. Am very happy with the way these clips look after this process and its my intention to transfer them into iDVD as individual chapters once they are all created HD clips. I may need a couple of discs but that's no problem and plan to burn the discs at the professional setting.
Am I on the right track here or am I missing some vital step(s) ??
Cheers.

Hi
Feeding iDVD HD-material will not improve - but set off various problems.
DVD is as standard (what ever DVD Author Program used) - interlaced SD-Video in PAL or NTSC - nothing else.
So to get maximum quality
• use a video editing program that can deliver - iMovie'08 or 09 or 11 - can not do that to 100% but discard every second line in the picture.
• iMovie HD6 and FinalCut can deliver 100%
If iMovie'08 to 11 is a MUST then do
• "Share to Media Browser" - AND AS LARGE - Not HD or other resolution as this too degrades the final quality
Then in iDVD - Import from Media button (down to the right) / Movies
on Quality I made these notes.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I concider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything bittons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

I want to create a DVD of JPEG images

I want to create a DVD of JPEG images from multiple albums in my catalog. I am using Windows 7 and Premier Elements 11. I have not been able to insert more than one menu marker in my "video." Any suggestions?

BobHabig32453
I seldom ran across a question to which I could offer an abridged answer. Sorry about that.
There is an assortment of miscellaneous information to guide your path as to what you can and cannot do with regard to a Premiere Elements DVD Template that represent the Main Menu and Scene Menu set. The number and kind of menu markers that you place on the Timeline are linked to the Menus - Main Menu or Scene Menu depending whether you have placed a Main Menu Marker or Scene Marker on the Timeline. Again, do not put a Stop Marker at the end of the last file on the Timeline.
Each movie (in your case album) cannot have its own Scene Selection page or pages. All the Timeline scene markers representation found on the Scene Selection page or pages is there in the order that each was placed on the Timeline. There is a limited amount of space under each scene thumbnail, and you do want to avoid button overlap.
Each main menu and scene menu that came with the program is designed with a certain number of buttons per page (Main Menu page or Scene Selection page). When the number of Timeline markers exceed the number of designed in buttons per page, the buttons spill over to additional pages (each a copy of the first).
Most Main Menu pages come with Play All button, Scene Selection button, and some with Main Menu or Bonus Movie button. Most are text type buttons, fewer are thumbnail type buttons for this Main Menu. You see the thumbnail type buttons in the Scene Selection Page, and typically the maximum number there is about 6, may goes to 8 in some rare instances.
Once you introduce Stop Markers to separate the multi movie type setup, your Play Movie (Play All) button on the Main Menu is meaningless. And, the reminder, two menu markers cannot occupy the same spot on the Timeline.
Important to the project are the pixel dimensions of the photos and the duration of the content. If you are heading for DVD-VIDEO on DVD disc Standard or Widescreen, the pixel dimensions should not exceed 1000 x 750 pixel (landscape) – classical recommendation here and elsewhere. Greater than that typically does not accomplish much other than stressing out the program. The level of computer resources can often dictate whether the program stress will set in sooner or later. That 1000 x 750 which is not written in stone is close enough to the export standard and will leave some room for pans and zooms if needed. Look to the Premiere Elements burn dialog prior to burn to and look at the Quality Section’s values for Space Required and Bitrate. The DVD-R 4.7 GB/120 min is in reality 4.3 GB and the “for best results” classical recommendation is not to exceed 90 minutes for this type of disc. There is also the DVD double layer disc 8.5 GB (really 7.3 GB)/240 minutes to think about.
How does this all impact what you outlined for what you would like to do? Many thoughts on that, but for starters:
Are your photos sized properly for a NTSC or PAL DV Standard or Widescreen project? Are you heading for NTSC or PAL DVD-VIDEO Standard or Widescreen? Are you considering Blu-ray disc format on Blu-ray disc in this regard for your Premiere Elements project.
How many albums do you envision in each of your planned DVD discs. I suspect the number is going to be in excess of 6 or 8. Here some of the considerations might be:
…switch the names of the .psd files for the main and scene menu (just the names) so that you can take advantage of the larger number of scene buttons on an already designed Scene Menu. The Timeline markers are Main Menu Markers in this instance, no Scene Markers. Result: One page Main Menu with thumbnails there displaying the first photo in each album.
…editing the .psd file for a DVD Template to add more buttons to the design. That requires strict adherence to requirements for doing that, including editing with Photoshop CS and later or a version of Photoshop Elements that will open the Layer Groups of the .psd so that you can get at the Folders and Files that you need to modify/duplicate and the like.
If you wanted text buttons instead of thumbnail buttons, you could look at a DVD Menu such as Faux Widescreen Main Menu Page and customizing that.
Not sure if long trip descriptions (text) would be feasible. I can offer a how to for creating a page for information before the main menu (like those FBI notices) if you thought that might be appropriate for any overview trip descriptions per disk. Lots of details, Lots of choices, but often with limitations and special considerations if you are restricted to what comes as is with the program.
Please review the above and then we could fine tune with more specifics.
Thanks.
ATR

Creating NTSC DVD in DVDStudio Pro from PAL material

Similar Messages

Maybe you are looking for