Creating Packages and Prefix in ABAP proxies
HI,
How to create Packages in ABAP .. while using custmized packages ZTAFE its giving the below error..
Package ZTAFE has no use access to package
interface SAI_TOOLS
regards,
Kishore
Hi ,
inculde the interface SAI_TOOLS under Use Access..
check this doc creating a package....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6066fbe8-edc4-2910-9584-a9601649747d
hope this helps...
Similar Messages
-
How to create package and import from jar file?
Hi all,
I am writing a software and I am not sure how to create a package for the classes.
Say I have two classes in the same directory as follows:
testA.java
==========
package AB;
public class testA
public static void main(String[] args){
testB myB = new testB();
System.out.println("A test");
testB.java
===========
package AB;
public class testB
public testB(){
System.out.println("B constructor");
both file compile without the package heading;
both file compile using: javac -classpath .\ *.java
Question 1:
I cannot run testA by: java -classpath .\ testA
I think it is a syntax error. What is the correct one?
If I run testA by: java testA
The only output I get is: A test
But I am expecting: B constructor /n A test
What went wrong?
Question 2:
I need to use APIs of another software. I have downloaded a .jar file (xxx.jar) with all the classes in it. And I have put "import xxx.*;" in my source file. But the compiler complains about the importing. What is the right way to copmile it?
I have read a couple of tutorials but they don't answer my question.
(I am using windows2000 and don't have the classpath variable.)
Hope some one can help.
Thanks a lotTry moving testA out of the package and importing 'AB.*;'
If you have:
./testA.class
./AB/testb.class
Then to execute testA from ./ type: java -cp . testA -
Creating Packages and Namespace for Webdynpro Java applications in NWDS
Hi Experts,
I am working on a stand alone application and using NWDS for the same. This application consist of some Webdynpro Java apps, Dictionary perspective DC's and BPM applications.
I need to create a package and name space for all the applications. I have read some documents on creating SC in SLD and using it in NWDI. But since I am working on NWDS i am not able to see the SC.
May be I am not following a correct procedure. Can some one provide a basic document or can tell me steps in short that i need to follow, for Name space and package creation and how to use them in NWDS.
I am working on CE7.1 ehp1.
Regards
PranavHI,
This blog expalins how to Setup and configure NWDI System land scape:
/people/bhavana.gupta/blog/2007/01/23/installation-and-configuration-of-netweaver-development-infrastructure-was-64
NWDI Post installation:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209
http://help.sap.com/saphelp_nw70/helpdata/en/44/60dc1943c2311ce10000000a155369/frameset.htm
Complete NWDI Resources:
NWDI Resources [original link is broken]
Thanks
SrinivaS -
Trying to create package and do not understand error message
What is wrong with this statement. Its say ASH411APPROVALEMAIL_PKG is not declared. I am trying to create it. Whats wrong?
ERROR MESSAGE
I get the following error.
Error at line 1: PLS-00201: IDENTIFIER 'ASH411APPROVALEMAIL_PKG' must be declared1. CREATE OR REPLACE PACKAGE BODY ASH411APPROVALEMAIL_PKG
2. AS
3. PROCEDURE ASH411APPROVALEMAIL_async (P_ATS_NO NUMBER
CODE
CREATE OR REPLACE PACKAGE BODY ASH411APPROVALEMAIL_PKG
AS
PROCEDURE ASH411APPROVALEMAIL_async (P_ATS_NO NUMBER)
AS
BEGIN
DBMS_SCHEDULER.define_program_argument (program_name => 'ASH411APPROVALEMAIL',
argument_position => 1,
argument_name => 'P_ATS_NO',
argument_type => 'NUMBER'
--,DEFAULT_VALUE => whatever_value
DBMS_SCHEDULER.ENABLE (NAME => 'ASH411APPROVALEMAIL');
DBMS_SCHEDULER.create_job (job_name => 'ASH411APPROVALEMAIL_JOBNAME'
|| P_ATS_NO,
program_name => 'ASH411APPROVALEMAIL',
enabled => TRUE,
comments => 'Comments'
EXCEPTION
WHEN NO_DATA_FOUND THEN
null;
END ASH411APPROVALEMAIL_async;
end ASH411APPROVALEMAIL_PKG;Hi, Howard,
csphard wrote:
Now when I go back and create the package again with the procedures it say package body created but does not
display anything."Package body created" is all it ever says (unless there's an error message).
How do I see the procedures I just created when I ran the package again with the procedures?If you want to see the source code, look at the CREATE PACKAGE BODY command in the script you just ran, or query the data dictionary view user_source:
SELECT text
FROM user_source
WHERE name = 'ASH411APPROVALEMAIL_PKG'
AND type = 'PACKAGE BODY'
ORDER BY line
; -
Why a semi-colon is not enough when creating packages and package bodies?
Hi,
I'm struggling with a quite simple problem - when creating a package header and body in the same script, it does not work as expected. See for example this very simple package:
CREATE OR REPLACE PACKAGE mypackage AS
PROCEDURE test_proc(id INTEGER);
END mypackage;
CREATE OR REPLACE PACKAGE BODY mypackage AS
PROCEDURE test_proc(id INTEGER) IS
BEGIN
NULL;
END test_proc;
END mypackage;
When executed from JDeveloper (or sqlplus), the package is created but with a "PLS-00103: Encountered the symbol CREATE" error. It seems Oracle does not recognize the script contains header and body, and uses the whole script as a header (which is obviously wrong).
If modified so that there are "/" everything works fine:
CREATE OR REPLACE PACKAGE mypackage AS
PROCEDURE test_proc(id INTEGER);
END mypackage;
CREATE OR REPLACE PACKAGE BODY mypackage AS
PROCEDURE test_proc(id INTEGER) IS
BEGIN
NULL;
END test_proc;
END mypackage;
Why is this necessary? Why Oracle does not recognize that "END mypackage;" actually ends package header definition, and combines it with the body definition into an invalid block? I've thought semicolon is a valid separator, so why is the "/" necessary?
It does not work even when I try to run the statements separately (from the same worksheet in Jdeveloper) - first select the header block, hit F9 (execute statement), then repeated the same for body. In this case both header and body are created, but are invalid because the last semicolon is removed from them (so it's not possible to compile them).For that to work, the SQL engine would have to understand PL/SQL syntax. Only the PL/SQL compiler knows when all the END statements have matched up with their corresponding declarations, and it doesn't do CREATE statements. I guess it could detect that the compilation unit it started has finished and pass any text left over back up to SQL to have another shot at. I'm not sure that's reasonable. There is no other example in SQL where one CREATE statement can turn into two - e.g. you can't send a block of CREATE INDEX statements together and expect the database to parse them out into separate commands.
Edited by: William Robertson on Jun 6, 2009 6:49 PM
Edited by: William Robertson on Jun 6, 2009 6:51 PM
Added example about indexes. -
ABAP proxy to file-Create package in SPROXY
hey guys
i m doin ABAP proxy to file scenario,and when i try to create a ABAP proxy its asking for the package and prefix,do any of u know how to create a package ?
also if there are any inbuilt packages that i can use
thanx
ahmadAhamd,
use custom packages and you can give prefix start with zxx_
thanks
Prasad -
How to create Package( development class) and how to assign the program
Hi,
Can any body give me the steps to create the package (developement class) and also please give me the steps to assign the local object ( program) to that development class.
thanks in advance
KPHi,
This document will help you to create package and move local package name to your package.
Package Creation:
1.T-code=SE80.
2. give the option 'PACKAGE' in text field, give 'PACKAGE NAME' then enter.
3. The next screen will open in that screen you shoul give short text and Software Component-'HOME'. then enter.
4. Next screen will open here you should give create request then next page will open
5.In the next page give short description this is your package identification,then click 'SAVE ' button now one unique number will open then give 'YES' button, now your package is created.
HOW TO MOVE LOCAL PACKAGE DATA TO YOUR PACKAGE
1.IN the same screen you should give program option, then open your local program ,
2.'WRITE CLICK YOUR PROGRAM NAME', then give 'COPY' option
3.Next window will open here you should give 'TARGET PROGRAM NAME'.
4. THEN you should give you 'PACKAGE NAME'.
now you can store local package program's to your package.
IF HELPFULL GIVE REWARD POINTS -
help me out that how can we utilize Suffix And Prefix in marketing Document.
we have created Suffix And prefix but they are not shown in the Document formHI
Object code means the B1 internal object types.
>>I Want to identify that which Document Have Suffix And Prefix in the NNM1 Table.
It is considering you? You must have to put a field where you concatenating the prefixdocnumsuffix, and this will be your docnum.
If yes, You can use next segment to connect to objtype ....
List of objects (also can be select objtype from [table name])
G/L account object. 1
Business Partner object. 2
Item object. 4
Sales employee object. 53
Transaction template. 55
Journal Posting object. 30
Loading Factor object. 62
Recurring Transaction object. 34
Product Tree object. 66
Check for Payment object. 57
Payment Terms object. 40
Deposit object. 25
Predated Deposit object. 76
Warehouse object. 64
Import File object. 69
Budget System object. 78
Sales Tax Authorities object. 126
Sales Tax Codes object. 128
Run External Application object. 86
Due Date objects. 71
User Defaults object. 93
Financial Period object. 111
Sales Opportunity object. 97
Confirmation Level object. 120
Confirmation Template object. 121
Confirmation Document object. 122
Draft object. 112
Goods Issue object. 60
Goods Receipt object. 59
Project Code object. 63
Contact object. 33
Journal Voucher object. 28
Profit Center object. 61
Vendor Payment object. 46
Receipt object. 24
Quotation object. 23
Order object. 17
Delivery Note object. 15
Delivery Note Return object. 16
Invoice object. 13
Invoice Credit Memo object. 14
Purchase Order object. 22
Goods Receipt PO object. 20
Goods Return object. 21
Purchase Invoice object. 18
Purchase Invoice Credit Memo object. 19
Correction Invoice object. 132
Stock Transfer object. 67
Work Instructions object. 68
Alerts Template object. 80
Special Prices object. 85
Customer/Vendor Catalog Number 73
Special Prices object. 7
Serial Numbers for Items object. 94
Item Batch Numbers object. 106
User Valid Values object. 110
User Display Categories object. 114
Address Format object. 113
Indicator object. 138
Cash Discount object. 133
Delivery Type object. 49
VAT Group object. 5
VAT Indicator object. 135
Goods Shipment object. 139
Expense Definition object. 125
Credit Card object. 36
Business Partner Central Bank Indicator object. 161
Business Partner Bank Account object. 187
Discount Code object. 3
Block Payment object for vendors and customers. 159
Agent Person object. 177
Period Indicator object for document numbering. 184
Holidays Table object. 186
Employee object. 171
Pre-defined Text object for sales and marketing documents. 215
Territory (geographic location, brand, or item) object. 200
SAP Business One User object. 12
Production Order object. 202
Bill of Exchange object. 181
Bill of Exchange Transaction object. 182
Address Pattern object. 131
Account Segmentation Code object. 143
File Format object. 183
Stock Revaluation object. 162
Inventory Pick List object. 156
Dunning Term object. 196
Service Contract object. 190
Contract Template object. 170
Install Base object. 176
Service Call object. 191
Service Call Solution object. 189
Item Groups object. 52
Package Type object. 206
Sales Forecast object. 198
Payment Method object. 147
Withholding Tax object. 178
Regards,
J. -
XML without namespace and prefix, modified package-info.java, JAX-WS option
Hello
I have created a consumer business service which will be called from JDEdwards EOne, pulls data from database and send it to Fusion Middleware.
SO, I have created proxy using JAX-WS option. And suggested in oracle doc, I created proxy outside OMW and then copied it to my project. XML payload is getting generated without namespace and prefix. After some research, I modified package-info.java. Now, I am able to send the payload and if test it locally from Jdeveloper and take xml output using marshaller I can see it has namespace and prefix as well. BUt, when I run this from server it does not have namespace and prefix.
Please help.
Thanks
TKJust to clerify,
The common complex types are StatusInfo, IdcProperty and IdcPropertyList. I ahve 3 more WSDL's with the exact same entires for those 3. -
Abap proxies ( Client and Server proxies)
Hi Team
Good day to you. I am now started doing some example scenarios on ABAP proxies(ie Client and Server proxies). After going through the blogs which are avialable, i am writing this question to you for clarification.
As per my understanding, the below are the required predefined settings which i need to do in my landscape to generate abap proxies(ie client and server proxies).
My landscape includes the below systems.
System A : SAP XI 3.0 system and
System B : SAP R/3 on WAS 620
SAP R/3 predefined Steps
1.Create HTTP connection in the business system.
2.Configuration Business system as local Integration Engine.
3. Connection between Business System and System Landscape Directory.
4. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
(Here in the step 4, i found the below needs to be done)
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
Program ID: LCRSAPRFC
Gateway Host: <Integration Server host>
Gateway Service: <Integration Server gateway service>
Number of process: 3
4. Under Repository specify the following:
5. Choose Set.
Application Server: <Integration Server host>
(i am not able to perform the steps which comes under point 4. so please Guide me how to goto J2EE engine and configure accordingly.
5. Maintain SLD access details in Transaction SLDAPICUST.
As per my understanding, i need to do the above predefined configuration steps in SAP R/3 system (ie bussiness System) for doing Abap Client or Server proxies.
And in the meantime, i would like to know whether i need to do any predefined configuration steps in XI 3.o system also. Please check and suggest me accordingly.
Once i get clarification on predefined configuration steps, i will proceed with the example scenarios on client and server proxies which are already in SDN.
Thanks in advance.
Regards
RajHello Pavan
thanks for your response. you said that for the connection type 'H' we need to provide values for GATEWAY HOST and GATEWAY SERVICE but here i need to create the RFC destination of type 'T'. so please tell me whether i need to give the values for GATEWAY HOST and GATEWAY SERVICE for connection type 'T' also and the second thing is please tell me the difference between Application system and bussiness system accordingly to my landscape which i mentioned in my question.
I am in little confusion because as per the requirement for abap proxies in the blog they mentioned that all these setting should be done in the bussiness system (ie SAP R/3) but you are saying that Application system. so please clarify.
My landscape which i am going to use in Abap proxy generation
System A: XI 3.0
System B: R/3
Here which is bussiness system and which is application system. Pls calrify.
Thanks in advance.
Regards
Raj -
OLE - Creating header and footer in Word document using abap
Hi All,
I'm using OLE to create a WORD document from abap.
I need to insert a logo in the header and a footer text.
Does any one know how to insert a header/footer with abap ole ?
I tried to insert the logo as picture with:
call method of o_inlineshapes 'AddPicture' = o_logo
exporting
#1 = 'C:\logo3.jpg'.
but I can't put it in the place I want..
thanks,
Michalcall method of LOBJ_MS_WORD 'ActiveWindow' = w_activewindow.
call method of lobj_activewindow 'ActivePane' = w_activepane.
call method of lobj_activepane 'View' = w_activeview.
SET PROPERTY OF w_activeview 'SeekView' = '9'. " header view.
" This will set the view to the header view. Whatever you write here
will go to the header.
Get PROPERTY OF lobj_ms_word 'Selection' = w_selection.
CALL METHOD OF w_selection 'TypeText'exporting
#1 = 'Rahul Anand'.
"Now set the view again to the main doc view.
SET PROPERTY OF w_activeview 'SeekView' = '0'.
" Now write your main doc code .
" For footer the view is '10'.
call method of LOBJ_MS_WORD 'ActiveWindow' = w_activewindow.
call method of lobj_activewindow 'ActivePane' = w_activepane.
call method of lobj_activepane 'View' = w_activeview.
SET PROPERTY OF w_activeview 'SeekView' = '9'. " header view.
" This will set the view to the header view. Whatever you write here
will go to the header.
Get PROPERTY OF lobj_ms_word 'Selection' = w_selection.
CALL METHOD OF w_selection 'TypeText'exporting
#1 = 'Rahul Anand'.
"Now set the view again to the main doc view.
SET PROPERTY OF w_activeview 'SeekView' = '0'.
" Now write your main doc code .
" For footer the view is '10'. -
Which Privilege needed to create a new Package and Stored procedure usage(in HANA studio)
Hello Friends,
In my company I have access to SYSTEM user(i.e. having all required permissions) ,I wish to create new " USER(s) " for trainees thus which "System privilege" or other privileges is/are needed for the following requirements -
1>To allow the "new user" to create new Packages(and the columnar views inside it and be able to execute,edit them)
2>Create Procedures inside their schema and execute using "call " command
I have given the following privileges as suggested by an ebook (SAP certified author).
The SELECT privilege on the _SYS_BI schema
The SELECT privilege on the _SYS_REPO schema
The EXECUTE privilege on the REPOSITORY_REST procedure
According to my knowledge "create schema" should be given for new schema creation.For my other requirements which all privileges are needed.
Thanx.In addition to Krishna if you don't want to expose all the package to the trainee, then create a new role keeping everything same as default MODELING role (open it and have a look) but in "PACKAGE PRIVILEGES" add only those package that you want to expose to the end users.
Regards
Kumar -
A question about creating packages as local objects in ABAP
Hi,
I have a question about creating packages with SE80. Whenever I create a new package it is assigned a new transport request. After that, I can create new programs inside this package, and each time I can choose whether to assign the new program to a transport request or just save it as a local object (I often do this for test programs that I don't transport and I remove them once my tests have been done).
What I would like to ask is that, is it possible to create a package (and not just programs inside a given package) as a local object? so that every new object created in this package will be considered as a local object?
Thanks in advane,
Kind Regards,
DariyooshThomas Zloch wrote:
Please also check the F1 help for the package field e.g. in SE80, SAP standard is in range A-S and U-X, namespaces start with "/", so you should be save. I am using the T namespace for temporary stuff since a long time and did not have a problem so far.
> Thomas
>
> P.S. this applies to the package name only, of course
Thank you very much for this remark, I checked F1 help for the package field and in fact as you mentioned these ranges are for local objects.
Once again, thank you very much for your help.
Kind Regards,
Dariyoosh -
1:n Message split and Abap Proxies??
Hello,
Can I not use Message split and Abap Proxy together? My scenario is MDM->File ->XI->Proxy->BI.
I am getting a single file syndicated from MDM and in XI If I use message mapping to do 1:n split in the message mapping, can I use it with Abap Proxies? As per the link below, XI adapter is not present in the list..We are on PI 7.0 SP14. Thank you..
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Thank you for any suggestion..Hi Thanujja,
If you see the message from Raj, I dont think we can split the messages for the proxy. This is beacause the splitting of messages take place at the Adapter Level only for the adapters on the Java stack.
As suggested by Guru, you can try splitting the messages in the inbound proxy instead of using a BPM, in that way you can acheive good performance.
Thanks,
Srini
Edited by: srinivas kapu on Mar 27, 2008 9:09 AM
Edited by: srinivas kapu on Mar 27, 2008 9:10 AM -
Creating data and .par files using SWIFT Integration Package
Hi,
I have a requirement to generate a data and .par file using SAP PI Integration package for SWIFT.
I am following the SAP Note: 1303428.
I have created 1 sender and 2 receiver comm channels(one for payload and other for par). Used operation mapping SWIFT_payload_parFile_split in the Interface determination.
I am using the adapter module : localejbs/swift/FileActConversionToSWIFTModule and setting the parameter DetachParameters to true. This adapter module is being used in all the three channels(1 sender and 2 receivers).
I have used ASMA ans has set the FileName checkbox.
Now after placing the file in the input directory, the file with the same name gets created in the output directory but the file is exactly same and also no .par file is getting created. I have set the Empty file handling to Ignore, so it shows that there is no data to create a .par file and only payload file is getting created but the payload file is exactly same.
Also if I use the adapter module : localejbs/swift/FileActConversionToSWIFTModule in only the sender communication channel, a payload file gets created like below.
<?xml version="1.0" encoding="UTF-8"?>
-<ns1:SWIFT_payload xmlns:ns1="http://sap.com/xi/SWIFT"><payload>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</payload></ns1:SWIFT_payload>
But while creating the par file, it shows that the file could not be overwritten and so the .par file is not getting created.
I need to understand that:
1) How do I configure both of my receiver channels i.e. what should be the difference. Currently, I am just setting the
same Output directory in both and file name schema * and has used ASMA with FileName parameter. So same name files are getting created and so one file gets discarded. How to create a .par file.
2) Also Is the file above is the correct file required by SWIFT.
3) Also when I check in SXMB_MONI, I can see that after running the adapter module same payload as given above is going in both payload and par files i.e. also if I am using different names in my receiver communication channels two files are getting created payload and par both are having the same payload. So what exactly should get created.
Kindly guide on this implementation.Hi,
I am able to generate the .par file by setting the localsecurity to true and the KeyId from the key manager.
Now two files are getting created .xml and .par. .xml file which is the payload file is the same as the input file with no difference and contains both the overrides and the data parameters. The .par file contains the Algorithm and the Value.
Is this correct?
Also suppose the input file name is SEPA.xml, then the payload file is created with the name as
SEPA.xml and the par file is created with the name SEPA.xml.par. I need only SEPA.par. How to achieve this.
Maybe you are looking for
-
Safari, MobileMe and Sound
Well here goes people... First of all, lets talk to the good of the new child on the block - when its working, its nice to have. No put downs here. I like it alot! Common Fixes that I have found - 1. Netflix.com can be fixed of its DRM woes by unin
-
Printing in Classic mode, no USB ports?!
Hi all, Sorry if this is a repeated topic, but I couldn't find the answer. I have a Blue and White G3 running OS X.2 and I can print with my USB Epson CX4600 in 10.2, and I can print in 9.2 when I restart in 9.2, but I can't print in OSX from any app
-
Hi all, can anyone suggest me the FM for payslip generation with the details of infotypes to be used. regards Rahul
-
I'm using a Flash slideshow on a Dreamweaver site (CS3) with six slide images (see code below). The first three images have a link to Adobe - not intended. I have not been able to remove the links. Is it possible that somehow the jpeg images themse
-
Does SAP Interactive Forms by Adobe work with ECC 5.0 ?
Hello, We are planning to use Webdynpro to develop our OWN forms in our PORTAL EP 7.0 and to get the data from our ECC 5.0 which is ABAP ONLY. Is this scenario possible ? Did anyone implement such a solution ? Do we need to install the J2EE addon to