Creating PS and EPS files on the fly

Is there any way to get OSX to have a virtual spooler that when you drop a file on it, it will create a PS or EPS file. You could do this in OS9, but i cant seem to do it in Tiger
Thanks
Stuart

I have been wondering the same thing. I use LATEX
and have always made my figures in Powerpoint
for presentations and then need to transfer them
to LATEX in eps format.
OS8-9 would let you write an EPS file when you printed.
I currently have to transfer to Illustrator which can
be tedious.
The new OS seem to only write PS files only after
PDF compression which is lossy and still requires
conversion to EPS.
Power Book Mac OS X (10.4.8)

Similar Messages

Can we create a XDP file on the fly

Hi All,
I am new to Live Cycle.
I want to know if we can create an XDP file on the fly and immediately using this XDP file can form server create a PDF?
Need this info urgently..
Thanks in advance.
Regards
Vinay

There are several ways to do this. The third chapter in the
cookbook is a good place to start.
All things in ActionScript are based on objects. Constructing
them with the data needed for the ui information you will need and
then binding that data to your dashboard objects is basically what
you are going to be doing.
For me it makes the most sence to have an idea of what
different types of objects you will be creating and create some
extended components for those objects. Then when you recieve your
data, binary or xml, you can digest the configuration settings from
the layout and populate the constructor for each of your
components.
It sounds like you need to organize your layout structure in
a heirarchy and from that you can walk each branch and create each
set of things as you parse your data.
Without a bit more information as to what you are
specifically doing that is about as far as I can go minus adding in
some code along some line that I think might work.
Hope that helps some.
-D

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

I have a created a directory structure ias\ias-samples\myapps\src\docroot.In docroot folder i have a single jsp.i created a war file having that jsp,and ear file having the war file

I deployed the ear file.Now i try calling http://localhost/myapps/test.jsp ??
i'm i doing the right thing ?

Hi,
This is right provided you have installed the webserver & app server
on the same machine and the port number for the web server is 80 by
default.
Regards
Raj
Arif Khan wrote:
I have a created a directory structure
ias\ias-samples\myapps\src\docroot.In docroot folder i have a single
jsp.i created a war file having that jsp,and ear file having the war
file
I deployed the ear file.Now i try calling
http://localhost/myapps/test.jsp ??
i'm i doing the right thing ?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

When I open iTunes, I get a message that "iTunes has stopped working". I've tried reinstalling itunes, creating a new user file, changing the startup programs, and am having no success in getting iTunes to stay open. Any "fixes" for this problem?

When I open ITunes, I get a message that "iTunes has stopped working". I have tried reinstalling iTunes, creating a new user file, changing the startup programs in accordance with articles in iTunes troubleshooting, but am having no success in getting iTunes to stay open. Any fixes for this problem?

Reading trace file on the fly.

I came across one cool trick mentioned by Tanel Poder, but it doesn't seem to work for me. Could anyone please help in reading trace file on the fly.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL> !uname -a
Linux abc 2.6.16.60-0.34-smp #1 SMP Fri Jan 16 14:59:01 UTC 2009 x86_64 x86_64 x86_64 GNU/Linux
SQL> select value ||'/'||(select instance_name from v$instance) ||'_ora_'||
2             (select spid||case when traceid is not null then '_'||traceid else null end
                 from v$process where addr = (select paddr from v$session
3    4                                               where sid = (select sid from v$mystat
5                                                          where rownum = 1
6                                                     )
7                                          )
8             ) || '.trc' tracefile
9      from v$parameter where name = 'user_dump_dest'
10     /
TRACEFILE
/n01/oraadmin1/diag/rdbms/abc/inst1/trace/inst11_ora_28754.trc
SQL> host mknod /n01/oraadmin1/diag/rdbms/abc/inst1/trace/inst11_ora_28754.trc p
SQL> set define off
SQL> host grep "WAIT" /n01/oraadmin1/diag/rdbms/abc/inst1/trace/inst11_ora_28754.trc &
SQL> set define on
SQL> alter session set events '10046 trace name context forever, level 8';
Session altered.
SQL> select * from dual;
D
X
SQL>
SQL> select * from dual;
D
X
{code}
I dont get any WAIT printed into the pipe file created before tracing.
Am i doing something wrong here ?
Edited by: Yasu on Nov 12, 2012 10:14 AM

I tried manual method and yes i am able to find WAIT lines in trace file.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL> select value ||'/'||(select instance_name from v$instance) ||'_ora_'||
           (select spid||case when traceid is not null then '_'||traceid else null end
2    3                   from v$process where addr = (select paddr from v$session
4                                               where sid = (select sid from v$mystat
5                                                          where rownum = 1
6                                                     )
7                                          )
8             ) || '.trc' tracefile
9      from v$parameter where name = 'user_dump_dest'
10     /
TRACEFILE
/n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
SQL> alter session set events '10046 trace name context forever, level 8';
Session altered.
SQL> select * from dual;
D
X
SQL> alter session set events '10046 trace name context off';
Session altered.
SQL> !ls -lrt /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
-rw-r----- 1 oracle oinstall 2738 2012-11-12 01:13 /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
SQL> !grep "WAIT" /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
WAIT #1: nam='SQL*Net message to client' ela= 6 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704368368424
WAIT #1: nam='SQL*Net message from client' ela= 4057810 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428142
WAIT #1: nam='SQL*Net message to client' ela= 6 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428492
WAIT #1: nam='SQL*Net message from client' ela= 195 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428892
WAIT #1: nam='SQL*Net message to client' ela= 3 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428939
WAIT #1: nam='SQL*Net message from client' ela= 46319788 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704418748740Not sure why using mknod fails in my case.
Edited by: Yasu on Nov 12, 2012 12:48 PM

Is there a way to compile or execute mxml files on the Fly...

Based on the success on PHP which let me script on the fly,
just recently with the website
http://heroku.com/ that allow to
create ruby on rails applications from a web interface, what if a
apache module or some other of web server, perhaps Adobe
Application server allow via web interface to compile & execute
mxml files on the fly...
This will let everybody to go to a particular website sign-in
then start building applications in the Adobe Cloud...and name
their applications and edit all the mxml code perhaps with an AIR
based application.
I really can't wait to see something like this in adobe take
off....
Best Regards Dino.

Based on the success on PHP which let me script on the fly,
just recently with the website
http://heroku.com/ that allow to
create ruby on rails applications from a web interface, what if a
apache module or some other of web server, perhaps Adobe
Application server allow via web interface to compile & execute
mxml files on the fly...
This will let everybody to go to a particular website sign-in
then start building applications in the Adobe Cloud...and name
their applications and edit all the mxml code perhaps with an AIR
based application.
I really can't wait to see something like this in adobe take
off....
Best Regards Dino.

How do I port my Windows Word, Excel, and Powerpoint files to the MAC? What software is needed on the MAC to use them? Thanks.

How do I port my Windows Word, Excel, and Powerpoint files to the MAC? What software is needed on the MAC to use them? Thanks.

You can certainly use iWork, though I hesitate to recommend it to a seasoned Windows user simply because it would add another level of the unfamiliar with which you would have to gain familiarity. The iWork applications are certainly very competent and in most respects both easy to use and surprisingly powerful. They are not 100% compatible however, though that typically manifests itself in document formatting issues rather than anything more significant.
I have never attempted to import emails from a Windows system into MacOS - other than in Outlook connected to an Exchange server, thus not really an issue at all. I doubt that the Mail app in MacOS can import directly, but of course you could always set the account(s) up on the Mac and then forward emails you want to keep from the PC. Not elegant, but it works. Virtually any Windows document or file, whichever application created it, can be opened or converted for use on a Mac, and using both systems on my desk each day I rarely see any issues switching stuff from one machine to the other. You may stumble over one or two issues, but likely not significant.
In switching platforms there will be some inevitable issues, not so much with being able to import your stuff because there's usually a workaround or a utility that can help, but just with getting familiar with the platform and the differences between Windows and MacOS that can obscure their similarities. From time to time the support community here hears from a user who has found the migration very problematic and regrets it, but for the most part the phrase 'I should have done this years ago...' is rather more prevalent!

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

How to create parameter and control file like filename + date

Hello there
I am trying to create parameter and control file with following command
in SQLPLUS
create pfile='/u03/oradata/WEBDB/backup/initWEBDB.ora' from spfile;
In RMAN
copy current controlfile to '/u03/oradata/WEBDB/backup/cf_longterm.cpy';
how can I put date at the end of filename like
initWEBDB8jan06.ora and cf_longterm8jan06.cpy
Thanks in advance
Lionel

ASM is reliable but a smart DBA is very careful. If ASM is doing mirroring this is like RAID doing mirroring. What happens if you accidentally delete one copy ... the other one disappears instantly. Not a good idea.
With respect to redo logs you need a minimum of three groups, two members, and one thread per instance. So a 2 node cluster should, at a minimum have 12 physical files.
Not mirroring the redo logs, assuming multiple members, is not as critical.

How to process files on the fly instead of uploading them to server ?

Hello,
We are using upload package of oreilly. is there a way to read files on the fly ? We don't want to upload files to server, open them and process them. But processing them on the fly will be faster for us.
thanks in advance...

Hello,
If we can upload a file to server by using oreilly's package, there should be a way to read the file after it's POSTED by client's browsers..
If we can do that, we'll not have to do followings:
- Saving file to our server
- Openning this file
- Reading this file sequentially
We want to read file on the fly. isn't it possible ? If not possible, how can oreilly package save files to a directory on our server.
thanks in advance...

About the MDF and log_LDF file in the SQL server

Hai Experts ,
I need known the , What is MDF and log_ldf file .
In our BPC server there are MDF and Log_LDF file in the MSSQLSERVER folder under the E drive.
The both file have huge database size .
Can u explain what is MDF and Log_LDF file , why its created ....
Regards
Daya......................

Hi Daya
Those files are the actual SQL database files, in SQL Server management console, you have a logical view of the database with all of the objects within the database. The *.MDF and *.LDF files are the actual physical files which makes up the database in SQL Server. (Where the actual data is stored...)
The MDF file is the actual data file
The LDF file is the transaction log file, SQL Server uses this file in order maintain ACID compliance. It uses transactions to ensure that the database will always revert to a known consistent state on failure.
More Info:
[http://en.wikipedia.org/wiki/Microsoft_SQL_Server]
You don't provide much information regarding the environment, i.e (DEV, QA, PROD, etc), but your *.LDF file should not be bigger that your *.MDF file, and if it is quite large, then you will need your DBA to shrink your Transaction Log file.
[http://databases.about.com/od/sqlserver/a/truncate_shrink.htm]
[http://www.sql-server-performance.com/forum/threads/transaction-log-file-will-not-shrink.15877/]
[http://4rapiddev.com/sql-server/delete-shrink-eliminate-transaction-log-ldf-file/]
Hope this helps
Kind Regards
Daniel

Creating Folder and Accessing Files from Folders in mobile phone

Hello Friends,
I am doing my project where I need to create folders and accessing files from those folders in java enabled mobile phones.But I do not know the required tasks for this.Any type of help is highly appreciated.
Greeting
Saadi

You have to get the classname of the Items you receive from getitems.
There you have only to look for Folder.CLASS_NAME. Example:
ifsFol sorted by names in ascending order (names of folders and files)
String[] sort_attributes = {"NAME"};
//sort will be ascending
boolean [] sort_orders = {true};
oracle.ifs.common.SortSpecification sort = new oracle.ifs.common.SortSpecification(sort_attributes, sort_orders);
ifsFol.setSortSpecification(sort);
PublicObject[] contents = ifsFol.getItems();
System.out.println("Here are the names of the items in folder: ");
for (int i=0; i < contents.length; i++) {
if (contents.getClassname().equals(Folder.CLASS_NAME)) {
System.out.println(contents[i].getName());
null

PC Suite converts flac music files on the fly to A...

PC Suite 6.86
Nokia 5320
Windows XP
I convert my music to AAC 128 with the Nokia PC Suite App. I drop files by hand onto the application and it converts it correctly.
Now I a have a lot of files encoded in flac format. I KNOW ALREADY that the 5320 does not play flac files.
(and I also know that there is the free app oggplay that plays flac, but because oggplay cannot use the hardware buttons of the Nokia 5320 this is not a solution for me).
But is it possible to have flac files converted on the fly when I drop them onto PC Suite. At the moment it doesn't seem to work so I guess Nokia Suite cannot read flac files to convert them to AAC?
Any way to change this?

Just to clarify:
I read the topics about flac on this board and I DO NOT want to add to the flac support questions. I do not need flac files to play on tthe 5320.
All I wanna do is convert the flac files on the fly with Nokia Suite (to AAC or eAAC+ or whatever is supported) and at the moment it seems its not working. So I would like a confirmation if it is not supported for conversion or if I am doing something wrong or maybe my PC Suite version is not the right one.
Thanks again.

I use a PC - I need to open ai and eps files - what adobe program do I need to purchase?

I use a PC - I need to open ai and eps files - what adobe program do I need to purchase?

You need Illustrator to open .ai files. That is, if you want to edit them.
If you just need to place them, then tell us what you want to do with the files.

Creating PS and EPS files on the fly

Similar Messages

Maybe you are looking for