Installing .gz files

I feel stupid asking this question. This is actually in Solaris 8, but I can not figure out how to install this .gz file. I type gunzip and the file name and is expands the file and removes the .gz extension and that is were I get lost. The file I am trying to install is libintl-3.4.0-sol8-sparc-local Thanks in advance for any help that I may be able to get with this.

I figured it out, as usual it was were simple. For anyone else that might have this same problem the fix is as follows:
pkgadd -d ./[file]
I tried the pkgadd -d ./ but it did not work without the filename.

Similar Messages

How to Install .CAP file in the Java Card?

Hi Friends..
How to install *.CAP* file in the Java Card?..
I've GPShell script as follows :
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
install_for_load -pkgAID a00000006203010c01 -nvCodeLimit 500 -sdAID A000000003000000
load -file HelloWorld.cap
card_disconnect
release_contextwith that script i can load HelloWorld.cap file successfully..
Now, how to install the HelloWorld.cap file?..
if i add script : load -file HelloWorld.cap i got this error :
install -file HelloWorld.cap
file name HelloWorld.cap
Command --> 80E602001B09A00000006203010C0107A00000015100000006EF04C60201A80000
Wrapped command --> 84E602002309A00000006203010C0107A00000015100000006EF04C60201
A80030C859793049B85300
Response <-- 6985
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of
use not satisfied.)i ask this question because when i tried to select the applet through its AID, by this script :
establish_context
card_connect -readerNumber 2
select -AID a00000006203010c0101i got this message error : select_application() returns 0x80216A82 (6A82: The application to be selected could not be found.)
but there's exactly any that AID in my Java Card..
here's is the list of AID from My Java Card :
C:\GPShell-1.4.2>GPShell listgp211.txt
mode_211
enable_trace
establish_context
card_connect -readerNumber 3
* reader name OMNIKEY CardMan 5x21-CL 0
select -AID a000000003000000
Command --> 00A4040008A000000003000000
Wrapped command --> 00A4040008A000000003000000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
A026E01029000
Command --> 8050000008AAF7A87C6013BC0300
Wrapped command --> 8050000008AAF7A87C6013BC0300
Response <-- 0000715457173C2A8FC1FF0200937A55C288805D8F2A04CCD43FA7E69000
Command --> 848201001023CA18742D36165ED992CFF2146C3D51
Wrapped command --> 848201001023CA18742D36165ED992CFF2146C3D51
Response <-- 9000
get_status -element 10
Command --> 80F21000024F0000
Wrapped command --> 84F210000A4F004FF8BE1492F7275400
Response <-- 0CF0544C00004D4F44554C415201000009A00000006203010C010100010AA000000
06203010C01019000
GP211_get_status() returned 2 items
List of Ex. Load File (AID state Ex. Module AIDs)
f0544c00004d4f44554c4152        1
a00000006203010c01      1
        a00000006203010c0101
card_disconnect
release_contextPlease help me..
And please correct me if i'm wrong,,
Thanks in advance..

Any suggestions for my question?..
Please help me..
Thanks in advance..

Is there a way to open powerpc installer in Mavericks to just install library files (not run power pc app)?

Hello, I was looking to install some files from a power pc program. However, I have osx x mavericks. I know the deal, since snow leopard apple swicthed to intel processors. I was wondering since I only need to install files and not install and run a powerpc app ,is there any way I can get the installer open to grab these files that I need? I just need the files, not to run the program, there has to be a way around this without having to run a program like paralells or to run a dual boot with leopard on another drive?
I'm trying to run a music plug in instrument program in Logic and I have everything installed except for the actual sound libraries wich need to be installed off this power pc installer. I went to the companies website and downloaded and installed all of the latest updates. I then ran a report which is telling me that I just need to install the missing library files (on the powere pc installation). Which I find confusing since I thought the whole point of the update i nstall was a way around that? Any help would be appreciated, thanks for your time.
Mike

MikeThomasmusic wrote:
...there has to be a way around this without having to run a program like paralells or to run a dual boot with leopard on another drive?
In my experience advising Logic users, depending upon the version of Logic and the model Mac you are using, if your Mac will boot from Snow Leopard, you can install Logic and all of its plug-ins in Snow Leopard and then upgrade to Mavericks.

Failed to install 1 file

I recently upgraded to a Palm T/X and after a couple of issues with synchronizing and installing files I think I've got the issues solved by changing the conduit of certain programs and upgrading to the new Palm Desktop (which I don't like as well as the old one but, Oh well!) it works OK specially installing files and that is all that matters. My recent issue is with a program I bought to back up my Palm since I no longer could do it by just inserting the backup card and restoring or backing up. This is the message I get when synchronizing: Failed to install 1 file(s) - BackupBuddyVFS.PRC - Invalid handheld file (file deleted) - Conduit Error: Invalid synchronization type (1012) - CONDERR_BAD_SYNC_TYPE.
I appreciate any help I can get, hopefully this is the last issue I have and I can start enjoying my new Palm.
Thanks!!!
Post relates to: Palm TX
This question was solved.
View Solution.

I upgraded from a Palm Zire72 and I'm pretty sure I followed the installation and synch instructions but I don't recall it asking to rename the backup file but I may be wrong. I've downloaded other applications including NVBackup without any problems. I guess I don't need it now since I have NVBackup but I paid for BackupBuddy and would like to see what it does. The one thing I can tell you is that I deleted a few files that I thought I no longer needed to make some room such as a couple of games and AvantGo. Hope this gives you some ideas and can help figure it out.
Post relates to: Palm TX

Windows 10 Error code: 0x80070570 at 68% "windows cannot install required files"

Trying to do a clean install from a USB flash drive and DVD. Same error each time at same location. (68%) I have removed all USB devices, Ran chkdsk and updated firmware on SSD.
Asus Sabertooth P67 BIOS 3602
i7-2600k 3.4GHz
24GB ram DDR3
500G SSD OCZ Vortex Sata 3
"Windows cannot install required files. The file may be corrupt or missing. Make Sure all files required for installation are available, and restart the installation.
Error code: 0x80070570"

Hi Covered,
Glad that you have resolved this issue.
Have a nice day!
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

'Windows cannot install required files' error while installing Vista SP1

I'm installing Vista Client SP1 on my Macbook pro and getting the following error:
Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
Almost exactly as described in this KB article: http://support.microsoft.com/kb/930984/ except my error code is 0x80070017. I'm double-checked CRC on my dvd to ensure it's not corrupt. Also I've previously successfully installed Vista SP1 from the SAME DVD on a different Mac Leopard (desktop)
Any ideas? This is a new Macbook pro, just got it yesterday. Could be DVD drive issue?
Thanks!

Did you get far enough to delete the FAT partition BootCamp created, so you could create a new NTFS one?
http://support.microsoft.com/kb/933925
or this:
http://discussions.apple.com/thread.jspa?threadID=1464025&tstart=0

Installation Failed The installer can't install some files in "/".

The full message is
Installation Failed! The installer can't install some files in "/". Contact the software manufacturer for assistance.
I first received this message when trying to upgrade Pro Tools from 8.0 to 8.0.1 a prerelease for snow leopard. I tried numerous things such as repairing permissions, as well as some pro tools specific things and to no avail. Still got the same error message.
So then I tried completely uninstalling and deleting all things pro tools from my computer. After a clean uninstall and removing all traces of pro tools I proceeded to try and re-install pro tools from my pro tools 8 disk. About a minute into the process I get the EXACT same error message.
I know this issue has been going on since even before snow leopard. I really need to get pro tools installed and running again or at least be able to get the program installed. I've isolated pro tools out of the mix because its been several different installers and even an installer from a dvd. I know this is a Snow Leopard or plain OS based problem. I have repaired permissions, created a brand new user, wiped clean and started over. I don't know anything else to do. PLEASE HELP???!!!

Hi Dean@mac & welcome to the forums...
Any specifics why it wants to install to / instead of Applications, as an example?
Seen these threads yet?
http://discussions.apple.com/search.jspa?search=Go&q=pro+tools
One thing to help investigate the issue is to create a new user just for testing that is stock with no add-on's etc., then login there and try to install. If it works there you can bet there is something unique to your original account that is borking that install - otherwise the issue is most likely global to your system and you might be out of luck until/unless a reportedly qualified version becomes available, etc.
Good luck in any case.

How do I install a file named "firefox_plugin_2.1.1.0720.fzip" ?

Hi,
I am trying to install a firefox extension from Foxit software (PDF reader) but firefox always comes back and says it is unable to start anti-virus program
Then when I get past that the file: how do I install a file named "firefox_plugin_2.1.1.0720.fzip" will not unzip or load into firefox. How do I get the program/extension to load?
Thank you
Jsteff
[email protected]

Hi and thanks for getting back to me.
Normally I am able to do most things with Windows and most programs..
However, I am not able to open the file with Firefox as it wants me to tell it which program to use.
I have the file on my desktop, but Notepad will not open it.
Firefox also asks me which program to use when Firefox is asking me "what should firefox do with this file?" That happens after I have gone to Firefox/File/Open file and it gives me the question of what do you want Firefos to do with this file.
The only choices are to open it or save it.
My problem is I do not know which program to select to open it.
So which program should I use?
Very sorry and thank you again.
Jsteff
[email protected]

How do you install a file system on an empty partition?

Hi. I'm running 10.3.9 on a B&W G3. I've formatted a 100Gb drive with a 40Gb partition on which Panther is installed (and which is running even as I type) and several empty partitions. I was going to install OS 9 on one of the empty partitions, but Disk Utility doesn't seem to want to let me do install a file system on an empty partition. Hence, the OS 9 installer can't find the empty partitions, and therefore can't install.
Is there another way to put a file system on an empty partition?
MTIA, Matt
PowerBook Titanium G4 Mac OS X (10.4) Also PowerBook G3, eMac, and misc elderly models

Matt--
One suggestion: if you can't figure out how to put a file system on the empty space, you could clone your current partition to an external drive, re-partition the internal drive drive and then clone the external back. Like John, I've heard of utilities that can re-partition a drive without erasing your data, but I just can't imagine using one if I didn't have a clone anyway. So that's what I've done when I want to change a partition size.
charlie

Installing .air file on Windows 7 64-bit

This batch command works in XP and in Windows 7 32-bit, but not in Windows 7 64-bit:
@echo off
REM
REM Set location to install to. (This dir must exist or install wont work!)
REM
set INSTLOC="c:\producthelp"
REM
REM Install help.
REM
AdobeAIRInstaller.exe -silent -eulaAccepted -location %INSTLOC% "Product Help.air"
(product name replaced with Product.) We are using the latest (today's) AdobeAIRInstaller.exe. We have tried using identical syntax to install other .air files from the Adobe site; they did not install either. Is there something simple we're missing here? Is there a known issue with installing .air files on 64-bit Windows 7? I couldn't find one at this site.

I think the reason you have had no reply is that no one has an answer. The only thing I can think of is to ask if the AIR file installs if you run it normally rather than from a batch file. If it does, then you know where the problem is but I cannot help you with that.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to do a clean install go yosemite and then just install certain files, apps, documents, phopt's, etc...from time machine backup?

How to do a clean install of yosemite (have Mavericks 10.9.5 now) and then just install certain files, apps, documents, phopt's, etc...from time machine backup?

Do a backup before doing anything.
If you want to make a clean install of Mountain Lion, boot into the Recovery Volume (command - R) on a restart, use Disk Utility to Verify/Repair the disk and run Repair Permissions. Then erase the hard drive using Mac OS Extended (Journaled) format using the Options button. Reinstall Yosemite. Restart normally and test. Use Setup Assistant or Migration Assistant to import what you want.
Clean Install

HT3669 I only have a HP printer and why I need to install a file for all the HP printers drivers 590MB??? if normally the size of my file should be 5MB. some one could me help to avoid installation of 590MB for my new mountain lion software???

Hi guys..!!
I would like to know if someone could help on this:
I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
Some one could help me how to avoid installation of 590MB for my new mountain lion software???
Thanks

If you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
This article lists all of the printer models for which Apple distributes the driver:
http://support.apple.com/kb/HT3669

Need Acrobat 9 pro install/download files

Over the years, my group has purchased Acrobat 7 Pro, 8 Pro, and 9 Pro... I have serial numbers for all of the above listed in my My Adobe/My Products area. I have disks for both 7 and 8 pro... Unfortunately, when our purchasing agent bought 9 pro, she only bought it as a download. (no disk!!!)
2 years later, my hardrive crashes, I get a new machine, and now I need to install 9 pro, so I can update to X.
I can reinstall Acrobat 8, but the sys-admin rules run every night to uninstall it. The agency bought Acrobat X Pro as an upgrade for those with Acrobat 9 pro, but because I can't find install files to use, can't get there...
Any suggestions? I need the install/download files to be able to install Acrobat 9 Pro. I have a license to use, just need the files.

To download Acrobat 9 Professional :
Go to the web page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=en
Login with your Adobe ID and Password. Now instead of clicking on the download button copy and paste the following link on the address bar and hit enter : http://trials2.adobe.com/Applications/Acrobat/APRO/9/trials/AcroPro90_efg.exe
This is the direct download link for Acrobat 9.
Note : This link would only work from the downloads page of Acrobat 10.
And as 'Top Gun Ben' replied : you don't need to install apro 9 to upgrade to apro x, just be ready with both serial numbers ( 9 and x ) upon launching x the first time for it will ask for both. In installing the upgrade version x, you just need the x serial, but when launching it the first time it will ask for both the x first and in the next page the qualifying version, which in your case the pro 9.

Missing the install.app file for Adobe Photoshop CS6 Extended...

Recently, I purchased a new Mac computer. We noticed there was not a CD drive, so we moved the Photoshop files over to a USB from my old computer. But, when we tried to open and install Photoshop, the install.app file was missing. The other install files were only compatible with Windows computers.
Can anyone tell me how to fix this?

KylieSommer wrote:
So, I checked out the second linnk and it says something about needing an upgrade if I don't have to most recent version? Does that mean I'll need to upgrade to Photoshop CC before I can get a cross grade? Or can I keep the CS6 Extended version?
Adobe loves confusing people with their marketing copy. Without trying, they often obfuscate the simplest of processes with poor wording.
The platform swap process only applies to perpetually licensed versions since they're tied to platform specific serial numbers: Mac or Windows, never both ( applies to CS6 and lower). Not CC which is licensed for both Mac and/or Windows via your Adobe ID, so there's no platform swapping necessary.
What Adobe is trying to say is that you can only swap platforms for the most current perpetually licensed version.
e.g. CS6 Windows can be transferred to CS6 Mac.
However, CS5 Windows cannot be transferred to CS5 Mac. You must pay the upgrade cost from CS5 to CS6 and swap platforms at the same time (that's a crossgrade). e.g. CS5 Windows to CS6 Mac is OK.
Photoshop CC is entirely different. It is available to anyone but only via subscription, even without ever previously owning any Adobe software. There's no upgrading or crossgrading. You simply join up - but keep in mind that you never own the software.
You don't need CS5 or CS6 to start subscribing to Photoshop CC. There's no connection with your CS5 license other than you can use your CS5 license to get a discounted rate for the first 12 months of CC membership.

I download latest software update for itunes and iphone. they successfully download, but then a message comes up saying unable to install as file has been corrupted. what is the cause?

I download latest updates for itunes and my iphone, when it comes to installing, it successfully downloads, but then i get a message for iphone software error=1403 file corrupted, and for itunes it downloads, then when i try to install it a message says unable to install software, file maybe corrupted!!

The iTunes update must be downloaded and installed before you try and use it to update the iPhone OS
Download iTunes 10.2.2 from here: http://support.apple.com/kb/DL1103
When it completes it will auto mount the disc image and show you the package installer, don't try and do anything with the file until it gets to this stage.
Once that's installed reboot the Mac, run iTunes, connect your iPhone and let it sync, then hit the update button and let it complete that step by itself (which will require a restart of the iPhone)

Installing .gz files

Similar Messages

Maybe you are looking for