Creating source system: No entry for BW_USER in table RSADMIN available

Hi,
When i try to create source system in RSA1, when I choose SAP system from Release 3.0E (Automatic creation), I get this message:
No entry for BW_USER in table RSADMIN available.
What do I have to do to create source system.
RFC connection are already made.
Best regards,
Uros

hi Uros,
you need to maintain ale user,
rsa1->settings->global settings->glob settings
enter bw user ale. normally ALEREMOTE is used.
oss note 410952
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.
hope this helps.

Similar Messages

Error in Source system-No entry for user in table RSADMIN Available

I have a user id with SAP_ALL
But when i try to create source system, i am getting the follwoing message
No entry for <user> in table RSADMIN Available

hi,
use the transaction rscusta
create user and enter the user
BW User ALE ALEREMOTE
or
rsa1 --> setting --> global setting ...
Regards
Ben

"No entry for BW_USER in table RSADMIN available"

Transaction "RSA1" -> "Source Systems" section. I right-click "BI" and choose "Create". I get the error:
"No entry for BW_USER in table RSADMIN available"
What does this mean and how do I resolve?
I did some searching. Someone recommended this: "rsa1->settings->global settings->glob settings". But I can't find "glob settings" or anything similar.
Also, I have one BI source system already defined, but I can't figure out a way to create a DataSource for it. I choose "Display DataSource tree", and when I right-click, I get "Replicate Tree Metadata" and "Replicate DataSources" but no option to create an application component or create a new Data Source. How do I do this?

Worked for me as well..
Thanks Srikanth
Reg
Mukesh

What is mean by "No entry for BW_USER in table RSADMIN availablea'

Hi All,
While creating Source system in my system i am getting this message "No entry for BW_USER in table RSADMIN available" , What is mean by this?
Reply back me to [email protected]
Regards,
Kiran

hi Kiran,
means no aleremote user maintained for bw, you can maintain via rsa1->settings->global settings->glob settings enter bw user ale. normally ALEREMOTE is used.
Creating source system: No entry for BW_USER in table RSADMIN available
hope this helps.
oss note 410952
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.

Keychain error -25299 occurred while creating a System Keychain entry for t

Keychain error -25299 occurred while creating a System Keychain entry for the username “Angela Rosario” and URL “afp://Angela%[email protected]/Data”.
I keep getting the error above every time I try to set up my time capsule
Could use some help?
Mahalo

Same here.

Unable to Create Source system in RSA1

I have installed a BI Server(Netweaver 2004s). When i try to add source system in RSA1, it gives an error "No entry for BW_USER in table RSADMIN available"
Let me tell what all i tried.
1) i clicked on settings>global settings- it gives a blank page. when i switch it to change mode, there is a button called "Position" and then "Entry1 of 2". I cant enter any value there and when i click on "Position" button, it says "Table RSADMINAV has no relevant fields"
2) In se16 tried to maintain RSADMINA table and for BW User field, i gave BW_USER, but there is no "execute" Button. all i see is "Reset" button. i tried pressing F8 key, it wont do anything. I clicked on save but it says "the entry is already exist"
Regarding RFC - i created a user BW_USER in ERP Sytem and ERP_USER in BI server and both the user type are System user.
From both the server i tried to do Connection test and i am not getting any error. but if i try clicking Remote Connection, it wont connect and wont do anything and no Errors.
Please help me Resolving this Issue, Since it became a very critical issue.

Hi,
Can you check if there is any other user ID specified in "BW user for ALE".
To check, Go to transaction RSA1 --> Settings --> Global Settings.
If you find a different user id there, then specify the correct BW user id there.
Please refer to OSS Note 410952 for details.
Hope this solves your problem!!
Regards,
Raj.
Edited by: Raj on Aug 14, 2009 8:15 PM
Edited by: Raj on Aug 14, 2009 8:16 PM

Creating source system PC Files on productive system

Hi,
I have a problem, i need to create source system PC Files on productive system.
I tried to do it in RSA1 - source systems.
I could not create any source system - error message :
"No entry for BW_USER in table RSADMIN available"
Where should be problem?
Thanks for help
Radka

Hi Radka,
You have two options to do that:
1. Write an ABAP program or use an Infohub to download the data on to your Prod Application server.
2. Download the data to your PC and then FTP to your Prod App server. You can speak to your BASIS on this.
Bye
Dinesh

Error in Creating Source System

Hi,
I have a freshly installed BW System here .... I noticed when I tried to create a new source system .... There is a message " No entry for BW_USER in the RSADMIN available"
Please assist
Thx

Hi SNK,
where are you getting this message??
when adding the user to RSDADMINA?
or when creating it in SU01 ?
or when creating the connection with the source system?
try creating ALEREMOTE as a dialog user. this is possible.
and you must have administrator rights (sap_all, SAP_new or similar) in the source system for BW to be able to create the necessary connections.
so as a recap;
1st create the user in Su01
add the user in RSDAMINA
create the source system, and logon to the R/ when asker as an administrator (i am not sure if you also have to log on in client 000)
good luck

Error while creating source system entry in SAP BW system

Hi,
I am creating source system entry in SAP BW system for ECC system.In T-Code RSA1 i entered all the details of source system and BW system like RFC destination of source system and RFC user passowrd.
After clicking on enter system is promting me to enter into the souce system using administrator user.but i don't have admin user with SAP_ALL and SAP_NEW profiles because in my organisation they don't assign these profiles to any user.
So can you please update me what are the authorization required for dialog user in source system.
Regards,
Gaurav

I would recommend to create a USER ID as COMMUNICATION type and assign SAP_ALL for it... this way, it can never be misused..
This will ensure that the user ID will have correct authorization in the source system and will not face any authorization related errors later on

Authorization for user in ECC while creating source system in RSA1 in BW

Hello All..
We are trying to create source system from BW(7.0) system using transaction code rsa1 to R/3 Production server.
After providing details in RSA1->Source system ; Remote logon screen of Production server pops up ...and ask to login thru admistrator Id..
To achieve the above task,, what authorization user should have in R/3 system..
Thanks

Hi,
Hope you are using the RFCUSER with these profile SAP_ALL , SAP_NEW , S_BI-WX_RFC in SAP ECC. Please create the RFCUSER with above profiles in ECC and BW (SAP_ALL , SAP_NEW and S_BI-WHM_RFC).
Pls follow the below steps for source system connection
In ECC side
1.) Client administration SCC4 ( select your client and allow changes to repository and cross client customizing)
2.) Define a logical system in ECC
3.) Assign a logical system in ECC
4.) Creating RFC user with system user type and give these profiles SAP_ALL, SAP_NEW, S_BI-WX_RFC
In SAP BI Side
1.) Client administration SCC4 ( select your client and allow changes to repository and cross client customizing)
2.) Define a logical system
3.) Assign a logical system
4.) Creating RFC user with system user type and give these profiles SAP_ALL, SAP_NEW, S_BI-WHM_RFC)
5.) Define RFC user as default (Click RSA1> Global Settings/Customizing dialog box> Glob. Settings)
Connection of SAP BI with ECC
RSA1> Source System>SAP>create>Enter the below entries
Target computer (server) Server of the SAP ECC
System ID System ID of the SAP ECC
System number System number of the SAP ECC
Background user in source system RFCUSER
Password for source system Password
Background user in BW RFCUSER (can not be changed in this activity)
Password for BW user Password
Select unicode in RFC destination and don't select the checkbox in logic screen.
On the dialog box Please log on as an basis administrator in the following screen choose Continue.
Log on to the Source System with your administrator user. Choose the correct client.
On the Replicate Metadata dialog box, choose Only Activate.
Make sure ECC client will allow changes in cross customizing client. It is one time activity once success then deselect the entry.
Hope this will help you to connect the system.
Rgs,
Ambuj Kathuria

Creating source system in BW3.5

Hi all,
I create a source system connection using automatic method and fill up all entry in create source system window in next screen i give user name and password then these errors are shows
<b>Changes to Repository or cross-client Customizing are not permitted Choose 'Display object' or 'Cancel'</b>.
when i am going in help of that error it shows this information In this logon client any changes to repository and to crossclient customizing objects are prohibited
can anybody tell me why these errors are occur.
thx.

Hi Ankit,
As you posted yourself this message is appearing because your system is locked for any kind of editing. You need to open it to create this source system. This is generally done by a BASIS consultant.
You can go to SCC4 as mentioned above by Pankaj and open the client to create this.
Regards,
Sumit

Error while creating SOURCE SYSTEM

Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
<b>Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.</b>
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
Vineeth

Hi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka

Create Source System - Error

Hi Gurus,
I have to create a conexion with R3 so i did :
1)Create RFC Conexion in SM59
2)Create Source System in RSA1
But in the last step of the creation Source System in RSA1 shows up the following Error Message:
"The source system already exists"
So i checked in the source system list, and it does not exists.
Can anyone help me about this?
THANKS A LOT !!!

Hmm.. not very good over here.. but can you dubleclick and see if they are leading to different clients or not?
I think they are 2 different clients of the R3's .. so this should be posible..
Did you created a new logical system and new RFC destinations for this new one?
May be that it is pointing out to the existing destination..
regards,
Hari

Create source system in BW3.5

Hi all
can anybody tell me the procedure for creating source system in BW3.5 using automatic method at this time i create and assign logical system in both BW and R3 system and create Background users in BW system now my confusions are
1 Is this nessory that i create a diffrent user which is not dialog user in BW or R3 and
2 Thing is this nessorry that no pre created RFC connection present in R3
thx

hi,
i m listing down the steps with brief description, check if you r going that way.
1.you have same background user in BW and R/3 with proper autho.
2.you created new source system in RSA13, selecting first option of automatic creation.
3.you fill in all details correctly in popup window "Create R/3 Source System", that comes up.
4.pressing ok, it will ask you to log in as admin in target system. Before loggin in check client no, it may be diff e.g. 000, then change it to yr system client no.
5.next it will give you RFC destinations screen. goto tab "Logon/Security", give password for the user thr. save the changes.
6.you can check the connection by clicking "Test Connection" and try also "Remote Logon". If your password is correct, then it will log you in the system.
7.now everything is setup, so comeback. It will ask you to replicate/activate datasources from the source sytem. Click "Replicate as Well".
pls mark question answered, if you have no further doubts
Now it is finished.
Hope it helps.
Regards,
Purvang

Creating source system in RSA1

Hi guys,
Im trying to create a source system in the TC RSA1 between R/3 PRO y BW PRO. But at the end of the process it sent me the message Source system already exists. There is no other source system for R/3 created. What can it be?
Thanks a lot
Regards,
Vic

Hi Vic,
Goto sm59 and delete the logical system for the R/3 system and retry the steps again.
Check this doc:
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
The steps for creating source system (automatic option in RSA1)is as follows:
1.Create remote logons in both the systems.
2.RSA1 -> Source system -> Create source system -> automatic creation
3. Enter the details of the R/3 system and the Remote logon ids of both the system. In case you are using BI 3.5 or greater + R/3 4.7 or greater the password is "case sensitive" hence have all the passwords in CAPS.
4. Now the system would create a remote logon and show up the remote logon screen. In that screen -> "logon and security" -> enter the remote logon id and password and save. Now the remote logon should not work from there.
The connection is established.
Bye
Dinesh

Creating source system: No entry for BW_USER in table RSADMIN available

Similar Messages

Maybe you are looking for