Creating SubTransaction
Dear All,
I am calling a storedProcedure for each row in viewobject(1-50 rows), which does some type of updations.
Now actually i want to enable transaction for this operation, i am trying to get current connection(as mentioned below) on am, doing connection.setAutoCommit(false); for enabling transaction
but when i try to do connection.commit() at end then the am is doing whole commit .. which i do not want, i want it to be isolated from all eo changes that i have done..
Any ideas how can i do it..
public Connection getCurrentConnection()
Statement st = null;
try
st = getDBTransaction().createStatement(0);
return st.getConnection();
catch (SQLException s)
s.printStackTrace();
return null;
finally
if (st != null)
try
st.close();
catch (SQLException s2)
Connection cc = getCurrentConnection();
cc.setAutoCommit(false);
//loop vo and call db procedure
cc.commit();
cc.setAutoCommit(true);Thanks
Santosh
jdeveloper 11.1.1.5.0
(ADF Faces and ADF BC)
Santosh,
If I understand your question, you have 2 options:
1). Use a different connection (not the one for your AM) so that your stored procedure calls execute in an independent transaction
2). Use an autonomous transaction in your stored procedure (and don't commit in your Java calls)
John
Similar Messages
-
Problem in Reversal of 57F4 Challan
Hi,
I m unable to reverse the challan. At the time of reverse of chllan excise duty is not comming.
I have already maintained assesable value and excise duty rate in J1ID but in challan asseble value is zero.
So please respond earliest.
Thanks
Richa AgarwalHi Richa,
Apart from what you have maintained ,
Kindly check whether you have created subtransaction type 01 for subcontracting or not.
Check whether it is assigned in Specify excise accounts per transaction or not? It should be for ETTs 57FC,57NR,57CM.
And for all these G/L should be assigned in account determination with & without subtrax type.
Regards,
Piyush -
Asset procurement (Import)CAPE
Hi gurus,
When we post the excise invoice the system shows an error message"Cenvat postings not possible".In this case the goods receipt is valuated.
I have maintained the excise master properly for the capital material,asset account assignment in PO,all account determinations for CAPEand tax classifications.
Will you please help me out.
With Regards,
RajashekharHi Raj,
Kindly mainatin the below setting,
1) Maintain the Excise transaction per Excise Account for
India->Account Determination->Specify Excise Accounts per Excise Transaction
Note:Create subtransaction IP for Import.
CAPE IP CR Credit CLEAR CENVAT clearing account
CAPE IP DR Debit ONHOLD CENVAT on hold account
CAPE IP DR Debit RG23AED RG 23 AED account
CAPE IP DR Debit RG23AT1 RG 23 AT1 Account
CAPE IP DR Debit RG23BED RG 23 BED account
CAPE IP DR Debit RG23ECS RG 23 ECS Account
CAPE IP DR Debit RG23SED RG 23 SED account
2) Maintain Account determination for Excise transaction CAPE-IP
India->Account Determination->Specify Excise Accounts per Excise Transaction
Excise group ETT Sub Tran Comp Code G/l Accts
CAPE IP
Regards
Sanjay L -
Hi expert
i am into CT3 ( no excise duty at the time of procurement ), but now in case any material got rejected we have to pay from pocket to excise.
Now i am making this scenario with sales document which is not right.i would like anything can be solve through MM excise part.
excise entries which i want is from system
Vendor excise duty dr
Excise duty payable cr
Regard
NabilHi expert
where i can create subtransaction type for such Vendor returns and assign the relevant GL account assignments in CIN customizing for transaction type MATD
regard
nabil
Edited by: sayednabil on May 26, 2011 2:35 PM -
Excise Transaction Type for consignment fill up / stock transfer
Hi
When i post excise invoice on account of removal due to sales (through J1IIN), SAP pulls uses DLFC excise transaction type. Following entry is posted at the time of J1IIN:
Excise Duty paid A/c.. Dr
To Excise Duty payable (Basic + ECess + SHEC)
My requirement is, when i post excise invoice on account of removal due to consignment or stock transfer, SAP should pass following entry:
Excise Duty paid on consignment A/c.. Dr
To Excise Duty payable (Basic + ECess + SHEC)
Excise Duty paid on stock transfer A/c.. Dr
To Excise Duty payable (Basic + ECess + SHEC)
For this, i will have to create different GL accounts and assign it to "CENVAT SUSPENSE" in excise transaction type table.
But i does not know which excise transaction type does SAP uses for consignment fill up and stock transfer. Please suggest.1.basic settings-create subtransaction type.
create subtransaction type
cf-consignment fillup
st-stock transfer
2.account determination- Specify Excise Accounts per Excise Transaction
copy DLFC and name it as DLFC and cf and also st.
3.account determination-Specify G/L Accounts per Excise Transaction
copy dlfc and maintain DLFC and subtransaction type cf and also st.
change the gl account for cenvat suspense for st and cf combination. -
Hi
Here i want to sell the raw material which had been procured ealier.But while selling i want 611030 for ED rather than 611010.I have attched 611010 for DLFC for Excise group in Logistic General - india .-specify accounts for ETT.N ow i want 611030 only in case of raw material sell,but when i going to change this G/L 611030 in DLFC for excsie group ,it affects the normal sell.Thats why i have giving this 611030 account by creating Subtransaction typebut when i m going to verify the accounitng documnet of J1IIN,i found 611010 instaed of 611030,the reason for that no subtransaction type been selected while J1IIN.
SO PLEASE SUGGEST OVER THIS MATTER.thakx
-
Hi friends
I am passing one exicse JV for Import duties in J1IH t code with transaction type IP but sytem is giving msg Subtransaction type is invalid
I have already created subtransaction type IP and assigned it to Excise TT GRPO and assigned respective GL code in combination with excise group in CIN settings still i am this error.
Please guide what is the problem and how can we get ride of this
Regards
VivekHi,
In selection screen, only in put Excise group and Excise Transaction Type and select Radio Button "Part 1 and Part 2 posted" and execute the report, if it is not showing the details then select radio button "Part1 posted, part2 not posted" and check it is showing some details, if it is showing under this option then document might not be posted.
Check in Table J_IPART2, whether the Excise JV document no exists or not?
Have you posted Additional Excise Entry (DIEX), at Item details level or header level. if you will enter Excise duties directly w/o entering material, quantity, etc... then it will not show in J1I7.
Try one entry by entering entering material, quantity, Ref. document, excise duties, vendor, etc... and then check in J1I7. -
How to create Excise Invoice.
Hi SD Guru's
How to create excise invoice and what is the use of this one and sd point what are the setting required.
Thanks
RajendraIn Indian Manufacturing scenario, Excise Invoice is required when goods move out of factory premises. The process is as under:
Inquiry / Document type IN
Tcode: VA11,VA12,VA13. tables VBAK,VBAP
Quotation / QT
Tcode: VA21,VA22,VA23. tables VBAK,VBAP
Sales Order OR
Tcode: VA01,VA02,VA03. tables VBAK,VBAP
Delivery LF
Tcode: VL01,VL02,VL03. tables LIKP,LIPS
Billing F2
Tcode: VF01,VF02,VF03. tables VBRK,VBRP
Excise Invoice
Tcode: J1IIN
Configuration of CIN Settings:
1.1 Maintain Excise Registration
Logistics general SAP Ref. IMG SPRO Maintain Excise Basic setting India tax on Goods Movements Registrations
1.2 Maintain Company Code Settings
SPRO Basic settingIndia tax on Goods Movements Logistics general SAP Ref. IMG Maintain Company Code Settings
1.3 Maintain Plant Settings
tax on Goods Logistics general SAP Ref. IMG SPRO Maintain Plant Basic setting India Movements Settings
1.4 Maintain Excise Groups
SAP Ref. IMGSPRO Maintain Basic setting India tax on Goods Movements Logistics general Excise Groups
1.5 Maintain Series Groups
SAPSPRO Basic setting India tax on Goods Movements Logistics general Ref. IMG Maintain Series Groups
1.6 Maintain Excise Duty Indicators
tax on Goods Logistics general SAP Ref. IMG SPRO Maintain Excise Duty Basic setting India Movements Indicators
1.7 Maintain Subtransaction Type with Text
India tax on Goods Movements Logistics general SAP Ref. IMG SPRO Maintain Subtransaction Type with TextBasic setting
1.8 Determination of Excise Duty
tax Logistics general SAP Ref. IMG SPRO Select Tax Calculation Determination of Excise DutyIndia on Goods Movements Procedure
1.9 Maintain Excise Defaults
SAP Ref.SPRO Determination of ExciseIndia tax on Goods Movements Logistics general IMG Maintain Excise DefaultsDuty
1.10 Condition-Based Excise Determination
tax on Goods Logistics general SAP Ref. IMG SPRO Define Tax Code for Condition-Based Excise DeterminationIndia Movements Purchasing Documents
1.11 Condition-Based Excise Determination
tax on Goods Logistics general SAP Ref. IMG SPRO Assign Tax Code to Condition-Based Excise DeterminationIndia Movements Company Codes
1.12 Classify Condition Types
SAPSPRO Condition-BasedIndia tax on Goods Movements Logistics general Ref. IMG Classify Condition TypesExcise Determination
1.13 Maintain Chapter IDs
tax on Goods Logistics general SAP Ref. IMG SPRO Maintain Chapter ids Master dataIndia Movements
1.14 Assign Users to Material Master Screen Sequence for Excise Duty
SPRO Master dataIndia tax on Goods Movements Logistics general SAP Ref. IMG Assign Users to Material Master Screen Sequence for Excise Duty
1.15 Specify Excise Accounts per Excise Transaction
tax on Goods Logistics general SAP Ref. IMG SPRO Specify Excise Accounts per Excise Account determinationIndia Movements Transaction
1.16 Specify G/L Accounts per Excise Transaction
tax on Goods Logistics general SAP Ref. IMG SPRO Specify G/L Accounts per Excise Account determinationIndia Movements Transaction
1.17 Incoming Excise Invoices
SAPSPRO BusinessIndia tax on Goods Movements Logistics general Ref. IMG Incoming Excise InvoicesTransactions
1.18 Define Processing Modes Per Transaction
Logistics general SAP Ref. IMG SPRO Define Processing Modes Business TransactionsIndia tax on Goods Movements Per Transaction
1.19 Define Reference Documents Per Transaction
tax on Goods Logistics general SAP Ref. IMG SPRO Define Reference Documents Per Business TransactionsIndia Movements Transaction
1.20 Maintain Rejection Codes
SAPSPRO BusinessIndia tax on Goods Movements Logistics general Ref. IMG Maintain Rejection CodesTransactions
1.21 Specify Which Movement Types Involve Excise Invoices
Logistics SAP Ref. IMG SPRO Specify Which Business TransactionsIndia tax on Goods Movementsgeneral Movement Types Involve Excise Invoices
1.22 Outgoing Excise Invoices
tax on Goods Logistics general SAP Ref. IMG SPRO Assign Outgoing Excise Invoices Business TransactionsIndia Movements Billing Types to Delivery Types
1.23 Maintain Default Excise Groups and Series Groups
Logistics general SAP Ref. IMG SPRO Outgoing Excise Invoices Business TransactionsIndia tax on Goods Movements Maintain Default Excise Groups and Series Groups
1.24 Subcontracting Attributes
tax on Logistics general SAP Ref. IMG SPRO Subcontrac Subcontracting Business TransactionsIndia Goods Movementsting Attributes
1.25 Maintain Movement Type Groups
SPRO BusinessIndia tax on Goods Movements Logistics general SAP Ref. IMG Subcontracting SubcontractingTransactions Attributes
1.26 Utilization Determination
SAPSPRO BusinessIndia tax on Goods Movements Logistics general Ref. IMG Utilization Determination UtilizationTransactions
1.27 Specify SAPscript Forms
tax on Logistics general SAP Ref. IMG SPRO Specify Excise Registers Business TransactionsIndia Goods Movements SAPscript Forms
1.28 Number Ranges
SAP Ref. IMGSPRO Number ToolsIndia tax on Goods Movements Logistics general Ranges
1.29 Message Control
SAP Ref. IMG SPRO Message ToolsIndia tax on Goods MovementsLogistics general Control
Regards,
Rajesh Banka -
"No subtransaction type allowed for this invoice"
Dear Gurus
While creating excise invoice (j1iin) from billing I am getting an error "No subtransaction type allowed for this invoice" . I get this error when I try to save the excise invoice. I am using subtransaction type.
The required config for subtransaction is done. The necessary excise account detemination is done.The config done is
1. excise account per transaction
2. G/ L account per excise.
Is there any setting that is missing?
Regards,
DDPHello,
Please have a check again for the below and the sub transaction type
G/L accounts sub transaction type
default groups for all the combinations that are relevant for your transaction
if it still does not work, re login and check again
these are the only settings through the sub transaction is activated
else have a debug with abaper to know the cause as the last option
Thanks
akasha -
Custom ETT can be created?
hiiall
In CIN , i have some doubts, whether custom excise transaction type can be created ??
If any body have this exp , can be shared here .
If not possible , revert with reason.
ThanksNo it can not be created
As they are preconfigured in sap and inmany of the programs its hard coded. So its not at all possible to creat ETT.
And more over SAP have not provided and SPRo settings where in u can created your own ETT.
As its not at all necessare to create this ETT wahat ever SAP have provided those are more than sufficent for all the senerious. As this ETT are used for excise account GL account , SAP have provide a faculatiy of Subtransaction type if u have some diffrent account determination for a perticular case
so i think SAP have not provided any facility to create ETT
hope this clears -
Error while Creating Presentation variable
Hi,I am new to OBIEE
I am facing this error:
"A numeric value was expected (received "max("Sales Measures".Dollars)").
Error Details
Error Codes: EHWH2A7E"
1.I am using paint rpd.I want to use presentation variable.
2.So i took two column in criteria 1.Region 2. Dollars
3.In Dollars edit formula ,I created presentation variable i.e. @{Doller_presentation}{max("Sales Measures".Dollars)} in the column formula.
4.And In the same column i use filter
Add ->presentation variable->variable exp =Doller_presentation and default =max("Sales Measures".Dollars)
5.I have added this request on dashboard page,but error is coming.
6.Also i have created dashboard prompt,
Set presentation variable to "Doller_presentation"
and in column formula :@{Doller_presentation}{max("Sales Measures".Dollars)}
and took that prompt on the same dashboard page.
so promt with 2 values are coming.1.All choces 2.13087528..may be ths is max value of dollar but on click its showing error as
"Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 42021] The query does not reference any tables. (HY000)
SQL Issued: SELECT 13087529 FROM Paint ORDER BY 1"
I am confuse abt use of presentation variable
Please Help,
Thanks
Kapil
[email protected]
Edited by: user13098263 on May 9, 2010 10:58 PM
Edited by: user13098263 on May 9, 2010 11:01 PM
Edited by: user13098263 on May 9, 2010 11:02 PM
Edited by: user13098263 on May 9, 2010 11:04 PMHi Rachit
You answered my doubt.This one really works . Thanks a lot !
But i have one more doubt i.e if have created the Presentation variable in the dashboard prompt and I want to use it in a report
i.e the scenario is If I have created a new column i.e " Revised Salary " in the Presentation Services and want the values to be entered there dynamically upon end users choice. For ex the end user selecrts value of 1 then the report would display an increament of 500 to all the employees in the " Revised Salary " column and if the end user select value of 2 .. the report would display a decrement of 500 in the " Revised salary column".
I am getting the following error :
========================================================================
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59001] Binary Logical operation is not permitted on VARBINARY, INTEGER operand(s). (HY000)
SQL Issued: SELECT "D0 Time"."T05 Per Name Year" saw_0, "D2 Market"."M04 Region" saw_1, "D4 Product"."P01 Product" saw_2, "D1 Customer"."C1 Cust Name" saw_3, "F1 Revenue"."1-01 Revenue (Sum All)" saw_4, CASE WHEN 0='1' then "F1 Revenue"."1-01 Revenue (Sum All)" +500 else "F1 Revenue"."1-01 Revenue (Sum All)" - 500 end saw_5 FROM "Sample Sales" ORDER BY saw_0, saw_1, saw_2, saw_3
========================================================================
Please NOTE : The column on which I want to do an increament is : "F1 Revenue"."1-01 Revenue (Sum All)"
Thanks -
Error while creating a Characteristic Variable with Replacement Path
Hi all,
I am trying to create the Characteristic Variable ZVLOWDT (Low Date') with Replacement Path on characteristic ZSTARTDT (Start Date) and it gives the error 'Source to replace 'Low Date' is not defined.
I have created a User Entry Variable VAR_DATE (Start Date) with interval like '01/01/2009 - 01/15/2009' and Customer Exit variable ZVCPDAY (does some calculation based on the input of VAR_DATE) on the same ZSTARTDT characteristic. I want to get the 01/01/2009 (lower range date of the selection) into this Characteristic Variable ZVLOWDT. We are in BI 7.0 and the following are it's properties:
General Tab:
Description: Low Date
Technical Name: ZVLOWDT
Type of Variable: Characteristic Value
Processing by: Replacement Path
Reference Characteristic: ZSTARTDT Start Date
Details Tab:
Variable Represents : Single value
Variable is: Mandatory
Variable is Ready for Input : unchecked
Replacement Path Tab: Replacement Rule
Replace Variable with : Variable
Variable : VAR_DATE
Replace with : KEY
Why I am getting this error, PLEASE ?
Thanks,
Venkat.Hi Khaja,
We could derive a Variable value from another Variable with out Customer Exit. There is a white paper.
First have the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next create the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we could get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path, PLEASE ?
Thanks,
Venkat. -
I created a birthday calendar to use in iphoto for calendar. When a new calendar project is started each year, I click on it in. Some how the birthday did not populate the photo calendar this year. The photo calendar is almost complete. Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.
Hi,
If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
Best wishes
John M -
Is there a way to create a year at a glance with detail and print?
Is there a way to create a year at a glance with detail and print?
To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time? -
Hi there,
I moved into iCloud from the very beginning and started with one iCloud account for me and my family, making use of email aliases for family members. Now the number of personal iDevices grows and I want to create a new and separate iCloud Account for my son. The pity is, that I reserved his full name already as alias address on my initial iCloud account. If I now delete this alias, can I create a new account with the former alias as new primary email address?
Or is there at least any transfer procedure supported for aliases between different accounts?
Thanks for your help, lauterbachjCouldn't agree more... the folks who are getting penalized for this are the early adopters of .Mac/iCloud dating from the days when the only way to implement a "family" account was to use aliases. Now all my kids' / my wife's name aliases sit in my account, unable to move. I guess the good news is that if I delete them nobody else will get them, but this seems a pretty poor consolation.
Would it really be so difficult to implement a "move this alias to another iCloud account" option that requires the "sender" and "receiver" to exchange some sort of code to implement the transation in order to prevent fraud?
Maybe you are looking for
-
Why do most of my stacks come ungrouped when I make changes to other files in the same folder?
I have a folder of about 3000 graphics and photos that I use for work. I've meticulously organized them all by using unique file names, keywords, and sorting. However, when I make changes to a set of files (especially using the batch rename tool), a
-
Links to PDFs Created with Illustrator Won't Work
I am using CS3. I create a document in Illustrator, save it as a PDF, and create a link to the PDF either through our website developer or through a newsletter program I am using. If I create the PDF using other programs (such as MSWord or Excel), th
-
Update InDesign Server Version on Mac OS X Server
Hi folks, quick question - quick answer: How can I update an InDesign Server running on an Mac OS X Server 10.5.8? Tried to use the installed Extends Script Toolkit, but the menu item under Help->Updates was disabled! Cheers Tino
-
Server crashed trying to find the cause
I'm trying to find the cause of our server crashing. It creates a memory.dmp file. I used a tool to look at it and the below is the output. But I can't find the cause in here can anyone else read these? Microsoft (R) Windows Debugger Version 6.3.9600
-
Hello there, hoping to get some advice on a couple issues with RoboHelp. We just started deploying FlashHelp here, and have run into a couple of snags. I am running RoboHelp version 6, Flash player version 9, and have the Flash authoring software (if