Creating transfer orders based on transfer requirements

Hi,
I have a requirement to create a transfer order based on a transfer requirement and also in that transfer order I need to specify the SSCC pallet number as Storage Unit Number.
I have searched the SCN and found that I should use FM L_TO_CREATE_TR. I also see that I should fill import structure it_trite with storage bin related data.
I am on a 46C system and I do not have the it_trite structure. I have seen comments that it exists in 45B and I also see it in ECC6 systems.
I cannot find any related notes on OSS.
Can someone confirm that 46C should not have this import structure? How am I supposed to specify storage unit number if that import structure is not there? Are there alternative FM's I can use?
best regards,
Glenn

A solution has not been identified...query closed.

Similar Messages

  • How to create an order based on Notification through BAPI_ALM_ORDER_MAINTAIN

    Hi
    I need to create an order based on the notification no. This is manually can be done using the Standard T.Code IW34.I am using BAPI_ALM_ORDER_MAINTAIN to create an order based on Notification. I am getting the below message( which is success message)
    Order %00000000001 saved with number 40001258
    BAPI control was ended
    Though order is created it not assigned to notification No. I am using ref key as '%00000000001' and also I tried with '%0000000000140232323' where 40232323 is notification No.
    And if I checked in order the notification No is assigned to order as '%00000000001'. And when I check back the Notification, the order is not assigned to Notification No. How to assign the created order no to Notification No.
    Code is attached for Ref.
    Now the problem is the order is not assigned to notification no. Is there any FM or BAPI to do the same fucntionality..!
    Regards,
    Amar

    Hello Amarnadh,
    Keng Haw Soon is right, object key should always have the client like 010.
    In your code you were passing it without the client.
    Pass like below and it will work.
    ls_methods-objectkey = '%00000000001000040232323'.
    Regards,
    Thanga

  • Created purchase order based in drafts

    I need help, I want to create purchase order based in drafts.
    Has somebody any sample in SDK??
    Thanks.

    Hi Santiago,
    Please see your Help Filesprovided with the SDK:
    DI-API > Reference > Overview > Objects > Documents. Below on that page you'll find a nice link to the sample below. Replace the <i>vDrafts.DocObjectCode = oInvoices</i> with order and you're set.
    Hope it helps,
    Rowdy
    <b>Code (VB from the Help File)</b>
    Sub AddInvoice_Click()
        Dim RetVal As Long
        Dim ErrCode As Long
        Dim ErrMsg As String
        'Create the Documents object
        Dim vDrafts As SAPbobsCOM.Documents
        Set vDrafts = vCmp.GetBusinessObject(oDrafts)
        'Set values to the fields
        vDrafts.DocObjectCode = oInvoices
        vDrafts.CardCode = "BP234"
        vDrafts.HandWritten = tNO
        vDrafts.DocDate = "21/8/2003"
        vDrafts.DocTotal = 264.6
        'Invoice Lines - Set values to the first line
        vDrafts.Lines.ItemCode = "A00023"
        vDrafts.Lines.ItemDescription = "Banana"
        vDrafts.Lines.Quantity = 50
        'Invoice Lines - Set values to the second line
        vDrafts.Lines.Add
        vDrafts.Lines.ItemCode = " A00033"
        vDrafts.Lines.ItemDescription = "Orange"
        vDrafts.Lines.Quantity = 1
        'Add the Invoice
        RetVal = vDrafts.Add
       'Check the result
        If RetVal <> 0 Then
            vCmp.GetLastError ErrCode, ErrMsg
            MsgBox ErrCode & " " & ErrMsg
        End If
    End Sub

  • SALES ORDER BASED  STOCK TRANSFER ISSUE

    Sales order based planning
                                                 A
                                B                              C
               D                        E
    In this A (header material) is sales order item and B is sub assembly. D, E, and C are raw materials.
    I am having four company codes 1000 , 2000, 3000, 4000 with plants one in each as 1010, 2010, 3010, and 4010 respectively.
    Always sub assembly B will be manufactured by 4010 plant. The sales orders for material A will be received by 1010, 2010 and 3010 independently.
    When i run MRP in 1010, 2010, 3010 for there respective sales order for the material A
    The material B will be always planned in 4010 basing on the special procurement key as stock transfer for the material B maintained in the respective sales order plant.
    My requirement is that for manufacturing B  i require material D and E .these raw materials  always has to be supplied from the parent sales order plant.
    Example :
    If material B is manufactured for 1010 plant the raw materials D and E have to be planned in 1010.
      If material B is manufactured for 2010 plant the raw materials D and E have to be planned in 2010.
      If material B is manufactured for 3010 plant the raw materials D and E have to be planned in 3010
    For this I have different special procurement key 45 as stock transfer from plant to MRP AREA ( in stand SAP). This will work if I am using in the same company code.
    Can I use this as inter company code also?
    REGARDS
    MADAN MOHAN

    Hi,
    i think BOM did not get copied correctly.
    the bom is like this
       A header material  and B and C are components for A . B is sub assembly with D abd E as child raw materials
    regards
    madan

  • Dangerous Goods checks in transfer order (based on purchase order)

    Dear,
    We have defined a process to transfer products from one plant of our company to another plant of our company based on a purchase order (Transfer order), a delivery and a shipment.
    Problem: the delivery and shipment could be checked in a Dangerous Goods standpoint but nothing seems to be available in standard to check the process at the first step : at purchase order step.
    My question is : do you know if a standard feature exist on purchase order to ensure a "non frustating process" as soon as possible ?
    Many thanks for your help
    Best regards, Jérôme

    Dear Jerome
    DG Set up is only related to SAP SD process (e.g. check SAP EHS online help), Therefore DG checks are not available in the purchase part. And your scenario it quite standard; Normally the DG check part starts in Sales process, then in delivery and then in shipment. If you use SAP TM again you can use DG checks there.
    C.B.
    PS: e.g. SAP GTS and SAP EHS SVT are integrated in purchase process by standard. But is is not a good idea to "misuse" these modules for DG perspectives in MM process.
    PPS. may be check: Blocking Hazardous Materials for Purchasing with HSM,
    System-Internal Stock Transfer Using Stock Transport Orders - Integration of Transaction Data - SAP Library

  • Printing Transfer Orders based on Manifest Number (Shipment Number)

    Hi All,
    We are on R/3 4.6c with Lean Warehouse Management.
    We have a requirement to be able to print Transfer Orders which are linked to a given Manifest - wondering if SAP has a standard way of doing this? 
    Sales Order 01 -> Delivery01 -> Transfer Order_01 \
    Sales Order 02 -> Delivery02 -> Transfer Order_02  ]----->>> Manifest_01
    Sales Order 03 -> Delivery03 -> Transfer Order_03 /
    We would to be able to say for 'Manifest_01' print all related Transfer Orders
    All help greatly appreciated.
    Thanks,
    Ravelle

    A solution has not been identified...query closed.

  • Transfer Order (LT03) additional info required

    Dear All,
    I have a kind of a problem. Thing is that I need to save additional information in case transfer order processing (LT03 transaction, both foregrand and backgroung - run  from VL06O) failed. I'm trying to get through user exits but cannot find any suitable for me and now the question is if it's me doing it wrong and looking for it not carefully or maybe it's not that easy.
    I hope you could help me.
    Best regards
    Pawel

    Hi,
    Check this user exit EXIT_SAPLL03T_001. This is called at the end of TO creation.
    Let me know if this helps or not?
    Thanks,
    Ramesh

  • Creating sales order based on store numbers in IS retail

    Hi ,
         I want create a sales order based on the PO received from the customer in the IS Retail system. The purchase order will be sent in a EDI file.
    a single line item in the PO will have multiple store locations where we need to ship materials. for example.
    Let us take an example
    PO will have an item "Shampoo"  quantity  - 1000, this 1000 has to be shipped to diffrenet stores like 0001 - 100, 0002 - 100 , 003 - 200 etc. Based on this PO we need to create a sales order.
    Is there any way we can handle in SAP IS retail to create sales order & save the customer store number in the sales order for that item
    With Regards
    K.Varadharajan

    Hi Varadarajan,
    For one Sales Order only one Sold to Party and one Ship to Party are possible as they are header data.
    You can have individual Sales Order for each outlet and one delivery can be made for several Sales Order for single Ship to Party.
    Hope this clarifies you.
    Regards,
    ManiKumaar

  • Create maintenance order based upon notification in NWBC / Portal

    Dear experts,
    How to create a maintenance order based upon a notification, using the POWL for notifications ?
    I am using NWBC and would like to create a maintenance order, based upon a notification put in process.
    In R/3, this works fine using transaction IW22 / IW28 and all info from the noticiation is copied in the new order.
    How can I get the same functionality using  the role SAP_BPR_MAINTENANCE_TECH_12 ?
    Kind regards,
    Dirk

    Dirk,
       You should be able to select the Notification number from the POWL overview list and choose the "Create Order" push button on the Tollbar (along with display notification, change notification etc).
      What i have noticed is that once you are inside the notification from the Portal application, the create Order push button or functionality doesn't seem to exists. This is probably incomplete functionality taking into consideration the standard IW22 transaction /Or a  Bug  and maybe you could raise a OSS Note for the same.
    Regards
    Narasimhan

  • Designing a BADI to create purchase order based on purchase requistion

    Hi..
    i ve to design a badi such tat whenever an order is placed it shld create a purchase order based on the purchase requsition..
    its like a user exit thru a BADI.
    theres somethg called a shoppg cart ... thru tat when we enter.... it creates a purchase requisition and without purchase order.... delivers it

    Hi,
        U can use the BAPI 'BAPI_PO_CREATE1' to create the purchase requisition.

  • Bapi to create a Transfer Order from a Transfer Requirement.

    Hi everybody, Does anybody know wich bapi or FM can I use to create a TO from a TR in a putaway process?
    Thanks and Regards,

    I couldn't do to work correctly the FM L_TO_CREATE_TR.

  • Create Planned order based on qty in APO or SCM

    Hi All,
    I am working product view in APO or SCM system .
    Requirement is create new planned order with sales order individual length and planned order pegged to sales order in APO system.
    Example
    Sales order has  factor 4 and individual length 1000( 4 x 1000 ). Total quantity is 4000M.
    We need to create 4 planned orders. Each Planned order has a quantity of 1000M.
    Please help me and  let me if any function module is there.
    Thank you,
    Durga Vinta

    Hi All,
    Thank you so much for your response.
    I have placed a X pushbutton in product view- > Element tab.
    If the user presses X then screen will display with sales order information based on Factor
    Example Sales order has 4 x 1000 = 4000M
    Factor individual length
    1         1000
    1         1000
    1         1000
    1         1000
    If the user selects the 1st and 2nd and presses save button. We need to create two planned order for sales order. Each planned order has 1000 qty.
    Please let me know if any function module or BAPI in APO system.
    Thank you,
    Durga Vinta
    Edited by: Durga Vinta on Jul 16, 2010 11:38 AM

  • Create Purchase Order based on Sales Order through DI

    Hi All,
    As per my requirment i need to create PO based on Sales Order by Using DI object.
    By using the UI i am able to create a PO. i.e,.  in the Sales Order Form , in logistic tab when the purchase check box is checked and when the SO is added there is a work around form poped up where we give the vendor information and create PO.
    Code:
          objPurchaseOrder = objSBOAPI.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseOrders)
                                        objPurchaseOrder.CardCode = "V1010"
                                            objPurchaseOrder.CardName = "Far East Imports"
                                            objPurchaseOrder.DocDate = "02/24/05"
                                            objPurchaseOrder.DocDueDate = "02/24/05"
                                        objPurchaseOrder.Lines.BaseType = "17"
                                        objPurchaseOrder.Lines.BaseLine = "0"
                                         objPurchaseOrder.Lines.BaseEntry = "35"  
                                             objPurchaseOrder.Add()                                                          
    Error Description : Base Doc Type donot match with target Doc type
    PLease help me
    Thanks and Regards
    Sandeep

    hi,
    try removing the double quotes for basetype, baseline, baseentry.
    if it doesn't solve the problem
    make sure that you are assigning the docentry only but not the docnum of the sales order to the purchase order lines' baseentry.
    rgds,laks.

  • Error message while creating transfer order

    Hi Experts,
    My objective is to create a transfer order from a transfer requirement programatically.
    I am trying to create a transfer order using FM L_TO_CREATE_TR programatically. Prior to this FM, I am calling FM L_TR_CREATE to create a transfer requirement. I am passing this transfer requirement to FM  L_TO_CREATE_TR to create a transfer order.
    But on execution of L_TO_CREATE_TR , I am getting an error message: THIS SCREEN IS ONLY ALLOWED FOR MANUAL TRANSFER ORDERS as a status message in the program.
    Please tell how to solve this.
    Thanks,
    Sangeeta.

    Hi,
    Check whether following link is helpful
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/lt04-from-lb01-1239928
    Regards,
    Dhana

  • Anyone used BAPI/FM for LT03 create transfer order

    Hi all,
    Has anyone used BAPI/FM for <b>LT03</b> create transfer order based on delivery.
    the BAPI/FM should accept <b>multiple line items for individual storage units</b>.
    thanks,
    Subba

    thanks Amit....
    But it would be helpful to know the usage of this FM....and if anyone has used in their program....
    thanks,
    Subba

Maybe you are looking for