Member request problem as a admin

How to see my Skype member' request? and I cannot find my member request to confirm their subscription as a admin!

This is a warning related to generics (read up on generics in the Java 5.0 docs). Your app will work fine.
However, if you wish to update your code to current standards (so it will compile without this warning), try something like this:          List<String> lines = new ArrayList<String>();
          try {
               FileReader myreader = new FileReader(filename);
               BufferedReader mybuffer = new BufferedReader(myreader);
               String temp;
               while ((temp = mybuffer.readLine()) != null)
                    lines.add(temp);
               myreader.close();
          catch (IOException e) {
               System.out.println("File Not Found");
          finally {
               System.exit(0);
          }

Similar Messages

  • How to accept my member requested subscriptions?

    to see my Skype member' request? and I cannot find my member request to confirm their subscription as a admin!

    I wanna know,pls help

  • What is Essbase Error (1024015) Request timed out by admin?

    What is Essbase Error (1024015) Request timed out by admin?

    I am getting this error trying to retrieve data in a spreadsheet connected to smart view.

  • MapViewer add datasource by admin request - problem

    Hello. Sorry for my english. I am from Russia.
    Please suggest me.
    I try to create datasource by admin request, but receive that error:
    <oms_error>Access denied for this operation!</oms_error>
    What does it mean?
    that is request
    <?xml version="1.0" standalone="yes"?>
    <non_map_request>
    <add_data_source
    name="myds"
    jdbc_host="mycomp1"
    jdbc_port="1521"
    jdbc_sid="orcl"
    jdbc_user="user1"
    jdbc_password="!123qwe"
    jdbc_mode="thin"
    number_of_mappers="3" />
    </non_map_request>

    If you are using MApViewer 10g (e.g. 10.1.3) this has to be done from the Admin pages once you've logged in as an oc4jadmin.
    To do this programmaticaly see LJ's post elsewhere in this forum on how to do this in Java. That was for clearing the map cache but the same logic applies here.
    Re: How can I refresh the map cache for Oracle Maps ?
    Jayant

  • Unable to find the published output for this request - problem

    Hi ,
    In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
    The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
    Unable to find the published output for this request.
    No output file exist for the request
    and if i see the log file i get this message :
    Arguments
    P_INVOICE_ID='10243'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    +/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
    XENVIRONMENT is set to  /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_ALBANIA.UTF8
    +' '+
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
    +(c) Copyright 1999 Oracle Corporation. All rights reserved.+
    The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
    And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
    Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
    PS: i am using ebs 11.5 version
    Thanks in advance,
    Best regards

    Hi,
    REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
    Regards,
    Hussein

  • Problem in starting Admin server in Obiee 11.1.1.5

    Hi,
    I'm facing a problem in starting the admin server in obiee 11.1.1.5. Since after the fresh installtion i'm facing difficulty in starting the admin server. so i request someone to give solution for the same.
    the admin-server error log as follows:
    ###<Sep 27, 2011 11:50:45 AM IST> <Critical> <WebLogicServer> <mildh1712> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1317104445891> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
    weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
    thanks in advance
    Praveen

    Hi,
    I have resolved that issue by commenting that line. Since I'm not using servlets, I hope that wouldn't create any problems !
    Sajan

  • Team member invitation problems

    we use the team membership and usually it works fine. today i (as admin) wanted to invite a new member and the invitation was send to the right email address. but the colleague can't accept the invitation. cause the form where you create the adobe ID (with the mailaddress just used for the invitation) is blocked. we can't type in it and so we can't proceed with the registration. i already declined the invitation and send a new one but the problem stays. what else can we do? thanks in advance.

    Hi capitoGmbH,
    Please try a different browser.
    Regards,
    Romit Sinha

  • Game Center friend request problem

    I am using an iPad Air on iOS 8.1.3. Me and a friend are trying to become friends in Game Center. At first, we couldn't get any requests to show up. We both went to the Add friend feature and tried entering both usernames and email addresses and neither of us were getting a request from the other. I have tried restarting the iPad and signing out and signing back in. After persistence, we managed to get requests to show up on each others iPads, but it wouldn't let us accept the request. It would appear, we would hit accept and then the request would stay in the requests list like we had never hit accept. Then my Game Center homepage would sometimes not change, or sometimes it would say 1 request and 1 friend, and sometimes if i had recently hit accept multiple times, it would say 1 request and 2 friends, but when you go in the friends list, it is blank. The friend is also running iOS 8.1.3. I am new to using Apple products, and this would be my first Game Center friend.

    Be sure to send Apple feedback about the problem.
    http://www.apple.com/feedback/

  • Game Center friend request problems

    I've tried to add my friend through Game Center and I sent the friend request fine via email, but when I asked her if she got the request, she said that she did and that on her friends list it said that I was added to her list and that she could see the scores on my games and everything. When she removed me, she sent me a request and I never got one. Anyone else have this problem?
    3rd gen iTouch, version 4.1

    Be sure to send Apple feedback about the problem.
    http://www.apple.com/feedback/

  • Transport request problem

    Hi all,
    when releasing the transport request from developement client subrequest is released properly but when released the main request getting the error
    " Test call of transport control program (tp) ended with return code 0232
        Message no. TK094
    Diagnosis
        Your transport request could not be exported, since all requirements
        were not fulfilled.
        Calling the transport control program tp
           "tp EXPCHK DEVK904964 pf=/usr/sap/trans/bin/TP_DOMAIN_PRD.PFL
        -Dtransdir=/usr/sap/tr"
        which checks the export requirements, returned the following
        information:
        Return code from tp:    0232
        Error text from tp:     ERROR: Connect to DEV failed (20071030084950,
        prob "
    can anyone suggest about this.
    thanks in advance .
    sk.

    Hi SK,
    As the transport log itself saying that the connection to development failed. There may be some connection issue in STMS. Ask your basis if there is any problem.
    Regards,
    Atish

  • Transport request problem with a ztable

    Hello,
    I have some problems releasing a customizing transport request. It contains "table contents" of a z table. This z table is marked as "customizing table" (option C).
    Error message is "task desk900213 belongs to a different category"
    Thanks.

    Hi Alberto,
    What type of request are you using. Also let me know the classification of task.
    I mean if you a workbench request is giving this error then try using a customising one and if a customising one is giving this error try using workbench transport.
    I guess this is related to the thread:
    Re: change object transport order
    Also I hope you have assigned a development class to the Z table.
    Please award points accordingly.
    Regards.
    Ruchit.
    Message was edited by:
            Ruchit Khushu

  • Windows XP Pro - SWVMS 1.2.1 - Problems running as Admin

    Hi there,
    Installed a new version of SWVMS 1.2.1 and went through the initial prompts to enter new password. Loaded the tool, setup the cameras - then prompted me to change to Admin settings, in order to connect to cameras.
    I noticed this error did not appear in 1.2.0.
    Anyways, played around quite a lot with the settings, within XP (confirmed I AM administrator) - but some reason its not recognizing the credentials.
    Also, tried to uninstall and reinstall app - but some registry files seem to stay there - and recognize old password and settings. Does anyone know where these are?
    Any help is appreciated.
    Zeeshan

    Thanks Jeff. That finally worked!
    I then ran into another problem - system would give me an error when inputting dyndns url. just would not accept it. So then added the internal LAN IP addresses, tested all the camera's, saved, exited the system. restarted the system, edited all the cameras with dyndns url - and poof! it worked!
    Seems that there may be a bug in v1.2.1 - as it seems it wants to see the local IP on the camera when it first connects using SWVMS16, once you edit and add dyndns url - it seems to accept that change later on.
    Zeeshan

  • Credit memo request problem using

    Dear All,
    I am creating credit memo request using SD_SALESDOCUMENT_CREATE, I am facing problems in this
    1> Quatity field is empty in the SO(TARGET_QTY)
    2> The credit memo is always being created with negative value, which should not be the case
    Note: I am passing manual condition type in condition type where calculation type is B(fixed value).
    Can anyone suggest me why is it creating Credit memo request with (-)ve value always.
    Thanks and regards,
    Kapil Shiavaji Sonavane

    Naren,
    1> I have already used that, see the following code.
    for SALES_ITEMS_INX
         LOOP AT T_BAPISDITM1.
            T_BAPISDITMX-ITM_NUMBER = T_BAPISDITM1-ITM_NUMBER.
           T_BAPISDITMX-UPDATEFLAG = 'X'.          
            T_BAPISDITMX-TARGET_QTY = 'X'.          
            T_BAPISDITMX-TARGET_QU  = 'X'. 
            APPEND T_BAPISDITMX.               
          ENDLOOP.
    But still Quantity is blank.
    2> Created Credit memo request is coming in (-)ve value this is major problem for me.

  • AT SELECTION SCREEN OUTPUT ON VALUE REQUESt problem

    hi I am fetching the values into second field based on first field by reading them like this
    <b>
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR ST_NAME.
      CLEAR: FIELD_VALUE, DYNPRO_VALUES.
      REFRESH DYNPRO_VALUES.
      FIELD_VALUE-FIELDNAME = 'EXCH'.
      APPEND FIELD_VALUE TO DYNPRO_VALUES.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          DYNAME             = SY-CPROG
          DYNUMB             = SY-DYNNR
          TRANSLATE_TO_UPPER = 'X'
        TABLES
          DYNPFIELDS         = DYNPRO_VALUES.
      READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
      IF FIELD_VALUE-FIELDVALUE IS NOT INITIAL.
        IF SY-SUBRC = 0 AND FIELD_VALUE-FIELDVALUE = 1.
          FIELD_VALUE-FIELDVALUE = 'BSE'.
        ELSEIF SY-SUBRC = 0 AND FIELD_VALUE-FIELDVALUE = 2.
          FIELD_VALUE-FIELDVALUE = 'NSE'.
        ENDIF.
        SELECT STOCK ST_NAME
                       FROM
                       ZEXCH
                       INTO TABLE TEMP_ITAB
                       WHERE EXCH = FIELD_VALUE-FIELDVALUE.
        IF SY-SUBRC = 0.
          FLAG = 'X'.
        ENDIF.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            RETFIELD    = 'ST_NAME'
            DYNPPROG    = SY-CPROG
            DYNPNR      = SY-DYNNR
            DYNPROFIELD = 'ST_NAME'
            VALUE_ORG   = 'S'
          TABLES
            VALUE_TAB   = TEMP_ITAB.
      ENDIF.
    </b>
    This is working fine, now my requirement is to fetch a value into 3rd field from database table when the user selects a value through 'F4IF_INT_TABLE_VALUE_REQUEST'
    Please help me with this, hope u got my problem, i want to know how to continue and fill value into third field after filling the field ST_NAME
    points guaranteed

    Hi,
    If you have two parameters, you want to display values(f4) in parameter 2 
    depending on the values entered in parameter 1.
    REPORT Z_SRI_HELP_VALUE_FOR_TABLES .
    tables tcurt.
    DATA   DYFIELDS LIKE DYNPREAD OCCURS 1 WITH HEADER LINE.
    PARAMETERS: P_WAERS LIKE TCURT-WAERS,        "Currency
                P_LTEXT LIKE TCURT-LTEXT,        "Long Text
                P_KTEXT LIKE TCURT-KTEXT.        "Short Text
    *--- Example of updating value of another field on the screen -
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_WAERS.
      CLEAR: DYFIELDS[], DYFIELDS.
    *--- select currency
      CALL FUNCTION 'HELP_VALUES_GET'
           EXPORTING
                fieldname        =  'WAERS'
                tabname          =  'TCURT'
           IMPORTING
                SELECT_VALUE     =   P_WAERS.
    *--- get long text for the selected currency
      SELECT SINGLE LTEXT FROM TCURT
        INTO DYFIELDS-FIELDVALUE
        WHERE SPRAS = SY-LANGU
        AND   WAERS = P_WAERS.
      IF SY-SUBRC <> 0.
        CLEAR DYFIELDS-FIELDVALUE.
      ENDIF.
    *--- update another field
      DYFIELDS-FIELDNAME = 'P_LTEXT'.
      APPEND DYFIELDS.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
           EXPORTING
                DYNAME               = SY-CPROG
                DYNUMB               = SY-DYNNR
           tables
                dynpfields           = DYFIELDS .
    *--- Example of reading value of another field -
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_KTEXT.
    *--- read another field
      CLEAR: DYFIELDS[], DYFIELDS.
      DYFIELDS-FIELDNAME = 'P_WAERS'.
      APPEND DYFIELDS.
      CALL FUNCTION 'DYNP_VALUES_READ'
           EXPORTING
                DYNAME                   = SY-CPROG
                DYNUMB                   = SY-DYNNR
           TABLES
                DYNPFIELDS               = DYFIELDS .
      READ TABLE DYFIELDS INDEX 1.
    *--- get short text and update current field
      SELECT SINGLE KTEXT FROM TCURT
        INTO P_KTEXT
        WHERE SPRAS EQ SY-LANGU
        AND   WAERS EQ DYFIELDS-FIELDVALUE.
    How to add F4 functionality to a paramter variable?  Say P_name ie Parameters: P_name like dbtab-fieldname
    in At selection-screen on value-request for p_name.  How should I add the values john, abraham, linga etc so that these values appear when f4 is pressed on the field in the selection screen?
    PARAMETERS: p_name(10).
    DATA: BEGIN OF value_tab OCCURS 0,
                   name(10),
                 END OF value_tab.
    DATA :field_tab LIKE dfies  OCCURS 0 WITH HEADER LINE.
    DATA : return_tab LIKE ddshretval OCCURS 0 WITH HEADER LINE. DATA : x TYPE string.
      AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_name.
      REFRESH value_tab[].
      REFRESH field_tab[].
      REFRESH return_tab[].
        field_tab-fieldname = 'ERNAM'.
      field_tab-tabname = 'VBAK'.
      APPEND field_tab.
        value_tab-name = 'John'.
      APPEND value_tab.
      value_tab-name = 'Abraham'.
      APPEND value_tab.
      value_tab-name = 'Lingam'.
      APPEND value_tab.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = field_tab-fieldname
        TABLES
          value_tab       = value_tab
          field_tab       = field_tab
          return_tab      = return_tab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc = 0.
        p_name = return_tab-fieldval.
      ENDIF.
    Regards
    Sudheer

  • Problem in Server Admin: cpu and network graphs not updated or empty after lion server update

    Hi!
    Just for archive purpouses because i've already solved that!
    After upgrading from OSX Server 10.7 to 10.7.1 my CPU and Network graphs in Server Admin stop being updated.
    In 24h the graphs where blank (disk usage graph seem to keep working).
    First i read about "what is the application responsible for this"; it's called ServerPerfLog, and you can see if it's running that way:
         # ps ax | grep ServerPerf
    If you don't see anything else than your own "grep", that means that no application is running, no data is being collected.
         41324 s000  R+     0:00.00 grep ServerPerf
    A positive response for this (meaning that the service is running) should be something like that (2 lines: your grep and the service app itself):
         94   ??  Ss     0:04.71 /usr/libexec/ServerPerfLog
         41344 s000  R+     0:00.00 grep ServerPerf
    Later i read about "where is the config file for this service app", and you can find it here:
         /System/Library/LaunchDaemons/com.apple.ServerPerfLog.plist
    If you edit this config file, check that the "Key > Disabled" is set to "False"
         # vi /System/Library/LaunchDaemons/com.apple.ServerPerfLog.plist
            <key>Disabled</key>
            <false/>
    After that, i try to launch the service that updates this graphs again, by hand, performing the following command:
         # sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.ServerPerfLog.plist
    And the service got launch!!! yeeeepa!! i see a first update in graph data.
    Also the "ps" query reply that the service was running!!
    The bad things came a day after, when i saw that the graphs stop again....
    I check if the service was running executing again the "ps" command, and that show me that the service was stopped again; no ServerPerfLog process was running.
    But r e l a x, because the process hang because of a permissions problem.
    You should know, I run "Repair permissions" within "Disk Utilities" over the running system disk, eeee... voila!
    I hope that helps someone to get his fancy graphs back!
    Regards,
    t

    You are God like!!! Wooo hooo! Thanks bud!

Maybe you are looking for

  • Unable to access disk repair option on OSX Install CD

    I tried to do a disk repair from the Install CD - I opened Disk Utility from the Installer menu, clicked on the Mac Harddrive in the left hand column and clicked on First Aid. While the Repair Permissions was accessible, the Disk Repair option was gr

  • Dell's pla

    The new hddmp3player from dell is produced by creative, does that mean that the dellremotecontrol works also on the zen touch and visaversa?

  • Video distorted on TV

    I'm getting a distorted image of videos on the TV. Both nano and universal dock with component AV cables were bought 2 weeks back. I can hear sound perfectly but the image is heavily distorted. TV Out is enabled in the iPod and cables are firmly and

  • Capture through firewire card

    hello friends, I want to capture video using firewire port in my laptop. Is it possible to capture through firewire card?... If so how can i do it?. Please help me .... regards

  • Optimizing MATERIAL Price List

    Hello All, We have Material Database of more than 2 000 000 records.  Creating a price file is very time consuming task. Up to now We use FM "PRICING" to determine the correct price according to relevant customer. I can optimize Material Data reading