Creating user groups using SQ03.

I am going to make a change to a already existing query 01 in the user group /SAPQUERY/AM. I am not a query expert, in fact this is the second query that I am modifing. I am reading some documentation that the first thing that I have to do is create a user group. from what I am reading, the user group will contain the users that are allowing to modify queries. Since our users do not use this tool, I am the only one that creates and modifies queries. I think I am going to create a user group and that my user-id will be the only one in the group - correct? will I create one user group and and queries that I make changes to in the future user this user group or do I create user groups based on the users group that are defined by SAP. example - If I am changing a query in /SAPQUER/AM  and in /SAPQUERY/AU - would I create 2 user groups  1 for AM and 1 for AU or would I create only 1 user group and use it for both queries.
After this, I think I have to copy the infoset (SQ02)and the query (SQ01) to custom names (names starting with Z) and then attaching the parts to the new user group.

Hi Timothy
Typically you want to create user groups for functional areas or grouped reports/queries. You can enter as many users as needed into a user group and only those who have the checkbox next to their name in the user group screen will have authorization to create/modify queries in the infosets where the usergroup is assigned. If you are creating 2 usergroups with the same users and authorizations then that is redundant but if the list of users is different or the authorizations may change then it would make sense to have 2 usergroups. You should have some naming convention to follow when creating the queries but the Z prefix is not required.
Andy

Similar Messages

  • How to create user group using Visual Admin Tool

    Hi
    I am trying to configure the Adobe Service in WAS.As part of this process,i supposed to create the Hroup Called "ADSCallers".In document it suggested to go Servcer>Services>Security Provider.In that i selected UserManagement Engine Tab,but there "Create User","Create Group" buttons are disabled.so how to enable it so that i can create the groups/users there.please help
    Thanks
    Prasad

    Hi,
    Did you change the display mode to change mode by clicking
    the "pencil" icon on the top left corner of the screen?
    Best Regards
    Srikishan

  • Creating Administration Groups using custom Target Properties?

    I've added a Target Property "Usage" to my 'host' Target type.  I would like to use this property when creating my Administration Groups.  When I try to create my Administration Group hierarchy, the only Target Property's available to use are the default ones (Lifecycle, Location, etc).  Usage does not show up.
    Is there a way to make this work or is this just a limitation of OEM?

    Hi Timothy
    Typically you want to create user groups for functional areas or grouped reports/queries. You can enter as many users as needed into a user group and only those who have the checkbox next to their name in the user group screen will have authorization to create/modify queries in the infosets where the usergroup is assigned. If you are creating 2 usergroups with the same users and authorizations then that is redundant but if the list of users is different or the authorizations may change then it would make sense to have 2 usergroups. You should have some naming convention to follow when creating the queries but the Z prefix is not required.
    Andy

  • Creating user group

    Hi team
    I had a few queries can u suggest.
    1. creating user group in one system?
    2. How to transport this user group to different clients in the same system?
    3. How to transport this user group to different clients to other system in the same SLD?
    4. How to transport this user group to different clients to other systems in othe SLD?
    SLD(System Landscape)
    Feebacks are greatly appreciated.
    Regards
    Bhaskar

    Hi Bhaskar,
    You can created the user groups by using tcode SUGR. However there is no need to transport the user groups. You can create the same user group in DEV,QA and Prod systems and add the user on logon data.
    There is also one another way to assign user group :-
    You can assign the user to user group on groups tab in SU01 tcode. Assignments that you make on the Groups tab page are not used for authorization checks that are specified on the Logon data tab page using the user group field.
    Regards,
    Sneha

  • Unable to assign the user in user group through SQ03

    Hi All,
    When I tried to assign a  user to one user group from SQ03 the tick mark is disables can't assign the user.
    This is happening only to one of the employee only. Others i can mark tick.
    Please advice.
    Imran

    Hi
    Please check if the user has authorization to that query....
    For example if the user is a PA administrator & you are trying to assign this user to a user group which is Time Management ( Time Infosets), then the tick will be disabled.
    This case was encountered in our firm too.
    Please check & revert.
    Regards,
    Megha

  • Error while creating resource group using non-globalzones.

    Dear all,
    Hi techs please guide me how to create failover resource group in nongloablzones.
    I'm getting error while creating resource group using non-globalzones.
    My setup:
    I have two node cluster running sun cluster 3.2 configured and running properly.
    node1: sun5
    nide2: sun8
    I have create non-globalzone "zone1" in node:sun5
    I have create non-globalzone "zone2" in node:sun8
    node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
    *(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
    kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
    Thanks in advance,
    veera
    Edited by: veeraa on Dec 19, 2008 1:54 AM

    Hi Veera,
    Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
    zoneadm list -iv
    If zone1 or zone2 are not running then boot and configure them
    zoneadm -z <zone> boot
    zlogin -C <zone>
    After that you can continue to follow the step by step instructions at
    http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
    These may also help
    http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
    http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
    Regards
    Neil

  • How to create user groups in SAP

    Hello Gurus,
    Can anyone let me know how to create user groups in SAP-HR Module and who will be creating  the user groups.
    plz provide me the steps.

    Hi Stephanie,
    IMG --> Personnel Mgmt --> Personnel Administration --> Basic Setting s --> Maintain User Parameters
    Please refer the below links:
    http://scn.sap.com/thread/1653026
    http://scn.sap.com/thread/1682721
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5?QuickLink=index&overridelayout=true&44478681629499
    Thanks,
    Madhav.

  • Unable to Create Users/Groups/Orgs in OAM

    I have created a admin user [oamadmin] in Sun One Directory Server and configured the admin user as a Administrator during the initial installation/configuration. When I go the Identity System Console, I can see the users from Sun One Directory Server. When I tried to create a User, Group or a Organization, I see the error message
    "You do not have sufficient access rights"
    Is there anything I'm missing? What should I tune if I have to create users, groups and organizations from Identity System Console? I have included the admin user [oamadmin] in Directory Administrators group in Directory Server.

    You have to create a workflow that creates user, group, ... and make the current logged in user (your admin in this case) the initiator of this workflow
    for more details check the identity and common administration guide section 5 - chaining identity actions into workflows

  • How to create users group under jazn realm

    Dear Experts,
    I am in need to create two groups of users under jazn.com realm. From my knowledge I have checked Enterprise Manager console. There is no option to create users group. What I have to do to create new users group. Please
    suggest that.
    Also suggest me, what is the maximum amount of users can we define under jazn.com realm.
    Thanks,
    Rajesh

    Rajesh
    check <Soasuite_home>\j2ee\oc4j_soa\config\system-jazn-data.xml. Add the role(your role name is your group name) and add the users to that group.
    You can do this from em, but if you want to add the properties like phone number, mail details, then you will need to change in the file.
    Nirav

  • How to create user group for EIS (Executive Information System) KCBA

    Dear Experts,
    How to create user group for EIS (Executive Information System)
    TCode KCBA
    Regards
    Saurabh

    Hi ,
    Check the below link ,hope it will give some inputs for creating groups.
    http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
    Regards
    udayakumar.k

  • Create User Groups and assign Access privileges in Reports

    Hi All,
    Could you share the document or explain which explains about the Standard method to create User Groups in CMC for BOBJ XI 3.1 architecture.
    And how to assign privileges to user groups like view reports, folders, privileges to create/edit reports etc.
    Environment:
    - Backend - BW
    - and  BO XI 3.1 sp3
    Thanks,
    AK

    BO XI 3.1 Administration guide
    http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_bip_admin_en.pdf

  • Exclude create user statements using datapump API

    I’m trying to perform a schema import and exclude the "create user" statements using the datapump API but I can’t get the syntax correct for the dbms_datapump.metadata_filter call.
    Using impdp I use a parfile that includes the following statements:
    schemas=bob, john
    exclude=user
    How do I achieve the same effect using the dbms_datapump.metadata_filter API?
    Any assistance greatly appreciated.
    Gavin

    Did you ever figure out your issue? I'm having the same issue after I try to set attributes.

  • Creating User Groups

    Hi All,
    How can I create User groups in Application Express 4.0.1.00.03.
    I am not able to find the link for creating User groups after logging in as found in the Help:
    1.Log in to Oracle Application Express. See "Logging In to Oracle Application Express" in Oracle Application Express Application Builder User's Guide.
    The Workspace home page appears. Note I have logged in as administrator for Internal Workspace.
    2.Click the Administration icon. - Not able to find
    The Administration page appears.
    3. From the Tasks list, click Manage User Groups. - Not able to find
    The User Groups page appears.
    Thanks & Best Regards
    Arif Khadas

    Hello Arif,
    >> Note I have logged in as administrator for Internal Workspace
    You should login to your working workspace as a developer with workspace administrator privileges. At the Application Builder home page you’ll see the Administration icon, and within it the Manage Users and Groups icon. In this module, you should select the Manage User Groups Task.
    Regards,
    Arie.
    &diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
    &diams; Author of Oracle Application Express 3.2 – The Essentials and More

  • How to create User Groups

    I would like to understand the steps for creating an User Group. I am currently doing SAP-HR configuration activities in Sandbox client & for the purpose of testing I have created an infogroup for "Hiring" action. But the action is not appearing in PA40. I realized later that I was doing some mistakes in assigning the user groups. So, I would like to create a user group. Is it an activity to be done by the BASIS consultant or can anyone create the user and user group in Sandbox environment.
    I request your help in resolving my problem.
    -Shambhvi

    HI,
    You have to define the user group while creating Infotype menu and Action.
    For infotype menu-  V_T588B.
    Action- V_T588D- Action.
    Define the same user group for infotype menu adn action. Once it done then maintain the same user group  against your user parameters.
    Go to transaction code su01( if you have the authorization or talk to your basis guy)
    Enter you user id (which you used to login your SAP )
    Click on parameters tab and maintain your user group there, like
    UGR-  for Eg. 40( what you have defined in infotype menu and action.

  • How to create users ,groups and  workflow in batch?

    I have to create 100 groups for each course,and each course has a admin user.Each group has some workflows .These workflow can only be viewed by some users.
    Can i import user name and password from a .txt file and do the work automatically?
    It is a hard work if i do it manually.

    I'm not sure you want to import users to use the magic triangle properly. I think importing creates 'Augmented Records' - the user icons have blue dots.
    The principle is this…
    Bind the server to Active Directory (AD) & create an Open Directory master (OD). This can be done from Server Admin, in the OD section, via the change button.
    Then you use Workgroup Manager, set the viewing directory (tiny little globe in top left) to use LDAP records on the server - LDAPv3/127.0.0.1. Authenticate (lock on right of toolbar) add a group, then switch to to its Members tab, click + Then change the user list to show the AD records & add the AD users to the OD group. It sounds weird & wrong, but it is how it works.
    You are never modifying the AD records, just assigning a group to the users in OD. It's why the clients need to bind to AD & OD.
    From there you can set the Managed prefs (MCX) for the members of the OD group. It also helps to add a guest computer account to OD to assign computer prefs based on the macs that bind to the server - it's in the File menu when you select the computes list in OD.
    I hope that's clear, not sure I can help with the other tasks, but they tend to fall into place once you have the complex start in place.

Maybe you are looking for