Creating workflow rule that can calculate open days

Hi,
Can someone help me confirm if what I'm doing is possible and if so if my syntax is correct.
I have created a field on the Service Request that calculates Service Level Agreement days.
I wish to create a new field that on close of the SR the system will calculate if Open days is greater than Service level agreement days - If it is greater them insert value "Not Met' and if less than insert value "Met".
IIf(TIMESTAMPDIFF(SQL_TSI_DAY,"Service Request"."Create Date",CURRENT_DATE) > [<nService_Level_Agreement_ITAG>],"Not Met","Met"))
However this doesn't work? Can someone help me??
thanks,

Hi,
These are functions supported in reports and not in advanced field management or workflows
You may have to write a simple workflow condition like below
[<Status>] = LookupValue("SR_STATUS", "Closed") AND ([<CreatedDate>] + [<nSLA_Days_ITAG>]) less than or equal to [<ClosedDate>]
then set the field as "Y"
Ensure the field ClosedDate is set properly on change of the status and place that as first workflow before the above
Hope it helps
-- Venky CRMIT

Similar Messages

Is iWork's compatible with excel? Can I create an iWork's spreadsheet that can be opened in excel?

Is iWork's compatible with excel? Can I create an iWork's spreadsheet that can be opened in excel?

You will need to export it as an Excel spreadsheet.

Is there a way to create a rule that sends and Auto Response for a shared mailbox?

I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
[email protected]
[email protected]
[email protected]
I would like to create a rule that would send an auto response when someone emails one of these addresses. However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
Nate

Hi
we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
2. Configure the Outlook account for the shared mailbox in Outlook.
3. Click Rules > Manage Rules & Alerts.
4. Create a rule like the following format:
Apply this rule after the message arrives
Have server reply using a specific message
Except if the subject contains specific words
Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
5. Apply the auto reply rules for this shared mailbox.
Then users can receive auto reply of the shared mailbox except the exceptions we have set when they send messages to this shared mailbox.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

How do I burn a CD or DVD that can be opened on a Windows PC?

How do I burn a CD or DVD that can be opened on a Windows PC?
Here's what we tried - and none of this worked when we tried the CD and DVD at our local library on their Dell, Compaq and IBM PCs.
1. We have 11 documents composed in Word (2004) in .rtf format with many, many photos embedded. The documents are in a folder.
We first created a disk image of the folder using Disk Utility: File> Create image from folder. Once we had the .dmg which was about 1.16 GB we burned this onto a DVD choosing no compression and no encryption. This DVD worked fine on the MBP but it wasn't even recognized by any of the PCs at the library.
2A. We tried to compress the folder to burn it onto a CD. In DU, by choosing compression with no encryption we reduced it to about 530MB. For some unknown reason when we tried to burn this onto a CD using DU, we got the message that the CD didn't have enough space. It is a 700MB CD so that made no sense - does anyone know why this would occur?
2B. So, we went to the Finder to use its burn option. We were able to put the 530MB compressed folder which we created in DU onto a CD using the Finder. Again, this worked fine on the Mac. At the library this CD was recognized by the PCs, but Word couldn't open it. Once we got a message that it was too large to be opened (bigger than 32MB!) - the librarian did not recognize this as a default that they might have set. Mostly, we got the message that Windows could not open the document.
What should we have done? What should we do to achieve this? I know there must be a way.
Mrs H

K Shaffer wrote:
The .zip file created by File> Create Archive in the Finder menu bar, would suffice;
but if traveling as far as India, you could consider taking along a USB flash memory
dongle with the file(s) on there as backup to the one you put on a DVD or CD media.
Thanks for the extra info, K.
This sounds like a good idea, but the CD is a gift for a friend in India and presenting him with a flash drive just won't be the same. (Although I suppose we could take the drive with us and burn something there - but that's too risky if it fails on the ground and besides, what we'd have on the drive would be Mac created, unless you have an idea on how to get around that - DU DVD/CD master? convert?)
{Little space is gained by putting a .dmg file inside a .zip file; I've checked with some
of mine and often it isn't really a deal maker to add a step in this process.}
The original folder as a dmg was 1.16GB too big for a CD. As a compressed file done in DU it was about 530MB and as a zip it is 450 or thereabouts. The files are on the MBP and I am on the G4 now and it is not turned on.
The fairly easy to use application the link takes you to, has almost no learning curve.
It will not compress an item, but you can easily; to include putting items in folders and
then use Create Archive to make them one package...
The Burn 2.3 utility makes Mac+PC compatible disc recordings, in DVD and CD media.
The simple interface is why it is handy. Otherwise, one could probably get by with the
other methods which are native to the Mac; through other steps...
I'm not sure what I am gaining at this point in time by doing this - if you both think archive (zip) and burn from finder will work.
This does sound like something we can definitely use in the future, thanks.
Mrs H

How do I create a rule that only applies to one mailbox?

How do I create a rule that only applies to one mailbox? For example deleting the messages in the box after 10 days.

You don't. Rules are applied only to new incoming messages, or manually to the selected messages. They cannot be used to delete messages after an amount of time. You could create an AppleScript or Automator action that would do that and then use a recurring event in iCal to run that script.

Why Adobe Reader XI cannot open a pdf file that can be opened with Reader 9?

Why Adobe Reader XI cannot open a pdf file within a browser that can be opened with Reader 9?

Hi Steve,
Sorry, I cannot post a URL to the file because it is for intenal use only.
I noticed that the pdf file can be opened outside of IE browser if I disable the Adobe Reader add-on (active-X) in IE browser. If I enable the Reader add-on, the Reader cannot complete the file download. The progress bar goes in a half way, and stays there.
Just FYI, the pdf file was created by Distiller 7. Do you think it is the issue of Reader add-on? Thanks.

Is it possible to embed a file that can be opened with another app in IBA?

We're making a music instructional book and would like to "embed" a .tef file that can be opened by the free tefPad reader:
https://itunes.apple.com/us/app/tefpad/id517830471?mt=8
I don't think it is possible, but wanted to see if there is some trick we haven't found.
Thanks much for any insights.

Check the iBooks Author, > Help > Media and Graphics and / or if you an iTunes Connect account, open and > > Deliver your Content on the right of some of the options are links to a number of PDF, Asset Guides, Formatting guides etc,.
iBooks Authur has a few widgets and there are many thrid party widget makers online such as Bookry, who may also be able to create what you want if its technically possible - at a price.

What is the oldest PS file type that can be opened in CS5?

I have a lot of work that was created in PS 7.0. I want to get the latest version. What is the oldest file type that can be opened in CS5?

You will have no problem with files created with PS7.
I have files from PS3 that still open!

I created a movie and can't open it. It says media offline when I try to open.

I created a movie and can't open it. It says media offline when I try to open it. I have another video saved in the same place that opens just fine. What do I do to open my movie?

This is nothing to do with Adobe Reader. Please ask your question in the correct forum.

Cannot create the RTP Session: Can't open local data port

Hi,
I'm trying to connect to two webcams simultaneously in the order:
MediaLocator inputLocator1 = new MediaLocator("rtp://hostname1:8000/video");
MediaLocator inputLocator2 = new MediaLocator("rtp://hostname2:8000/video");
But I get this during the second connection:
Cannot create the RTP Session: Can't open local data port: 8000
And I can't see the video from hostname2.
I did a check via netstat, and it seems that both mycomputer is receiving the video from both hostname1 & hostname2:
TCP mycomputer:3236 hostname1:8000 ESTABLISHED
TCP mycomputer:3264 hostname2:8000 ESTABLISHED
TCP connections to both host were established!! But why can't I see the video of hostname2???? I've thought of 2 possible reasons why I cannot see the video of hostname2:
1. Is this set of local data port maintained by Java? i.e It's not the same as the TCP port 8000 that I see in mycomputer's netstat. If yes, Java has assigned its local data port 8000 to hostname1, so it fails to reassign that port 8000 to hostname2 while hostname1 is still connected. Any other way to fix this apart from changing the portnumber of hostname2?
2. It has to do with the custom.jar? I've read in an article somewhere in the forum that the custom.jar has to be customized (using JFMCustomizer) to receive video from two hosts with the same portnumber. Can someone elaborate the necessary boxes to check in the JFMCustomizer?
Thanks much,
Rach

After all this while, I finally figured out the problem. In my code, I use MediaLocator to code the receiver and the transmitter. E.g.:
MediaLocator inputLocator1 = new MediaLocator("rtp://hostname1:8000/video");
player1 = Manager.createPlayer(inputLocator1)
MediaLocator inputLocator2 = new MediaLocator("rtp://hostname2:8000/video");
player2 = Manager.createPlayer(inputLocator2)
Manager would complain "Cannot create the RTP Session: Can't open local data port: 8000" because port 8000 is already used up by player1, i.e.:
mycomputer:8000 maps to hostname1:8000
mycomputer:8000 cannot re-map to hostname2:8000
To work around this, I'll need to use SessionAddress. SessionAddress provides the flexibility to do an independent local port mapping, e.g.:
mycomputer:5000 maps to hostname1:8000
mycomputer:5002 maps to hostname2:8000
Rach

Max number of files that can be opened in harddrive through AEBS?

What is the maximum number of files that can be opened in a external hard drive (Lacie 500 GB, USB 2.0) connected through the AEBS? Looks like there is a limit.
When I am trying to 'seed' files through a bit-torrent client (Azureus 2.5.0.4) many of them give an error "Error: too many open files". I never had this error before.
When I tried to delete a file in the hard drive, I got the error "too many open files". Then I stopped 'seeding' in Azureus and I was able to delete the file.

Thanks Chris, it has almost become unwieldy now at this stage ... I'm actually thinking of calling another template for certain sections
I belive this is possible..

Anyone has a canny edge detector vi that can be opened in Labview 7.0??

Hi,
Anyone has a canny edge detector vi that can be opened in Labview 7.0??
Thanks and many thanks.!

Hi aaz,
If you are using RoboLab I would suggest posting to the Lego Mindstorms Forums as
they offer RoboLab support. The screenshot I had posted was for
LabVIEW using the Vision Development Module (VDM). The VIs that you
are missing are part of the NI-Vision software which comes packaged
with VDM. Best of luck with your RoboLab application.
Vu

How to create a user that can login the LDAP?

I want to create a user that can login the OID/LDAP. I know how to create a user, it is allowed to login OIDDAS, but I also want the user to grant access to ldap directly. How do i do that?
And how can I give it read rights and or update/delete rights on a specific tree?
Regards
Eelco

Eelco,
did you see the OiD developers guide? Here you find some examples how to create users in OiD using pl/sql or java.
http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95193/smplcode.htm#637294
how to use directory access control can be found in
http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95192/access.htm#1054232
--Olaf

Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

You are asking two different questiions:
1. What's a good photo editor? Answer to that here is probably obvious.
2. What's a good desktop publishing/page layout program for creating PDF files for production? Answer, not PSE. It's a photo editor, not a page layout program.

Max files that can be opened

hi,
i am getting an error "Too many files open".
I am closing the streams i dun want but just that I have to open many files.....
what is the max number that can be opened? is there any way to increase this number?
thanks

is there anyway to increase this upper limit?
i'm on win2k on a P4 machine.... I am using WordNet Java interface and it opens up a new file everytime I have to find a synonym (and i'm doing it recursively).....
or any alternative to WordNet?

Creating workflow rule that can calculate open days

Similar Messages

Maybe you are looking for