Creation in a file different that the file from the Panel Master-detail

Hi,
I must present the printed papers form according to the headings according to the file of the headings.
Then, according to their choice, I want to create the lines of the order.
With this intention, I create a Sight (on the 3 files Rubriques, Imprimés, Order-lines). Sight which is correctly created.
But when I want to create the Panel Master-detail), it does not allow it to me and the msg posts me: “the OLIVIER diagram does not have privilege of selection on the table or sight COM_COMMANDES_LIGNES_IMPRIMES.”
#COM_COMMANDES_LIGNES_IMPRIMES is the name of the sight that I have créée.#
What do I hurt? Quelq' un#e# pouraa it #il# to repair me?
Thank you and good day.
Olivier

I have another problem:
I would like to create an aggregate variable, in order to have the LEVEL of USING. (as APP_USER which is a value system and which one can use on all the => pages
then I create:
1. a variable on the level application in divided Elements/Elements of application,
2. in the screen wanted, I create a calculation with Interrogation SQL and the following code: :
select LEVEL
into F150_NIVEAU
from COM_DEMANDEURS
where upper#USERDN# = upper#: APP_USER#
But when I carry out the page there is an error message:
"ORA-00905: mot-clé absent
Erreur ERR-1003 Erreur lors de l'exécution d'une interrogation de calcul.
OK"
Can't I any more what make???
Can you help me once again?
I thank you and wishes you a good day.

Similar Messages

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

I am a new iPhone 4s owner. I have a tone in iTunes that I downloaded from the web as a m4r file. Why won't it sync to my iPhone so I can set it as a ringtone.

I am a new iPhone 4s owner. I have a tone in iTunes that I downloaded from the web as a m4r file. Why won't it sync to my iPhone so I can set it as a ringtone?
Lois

Yes, the tone is available and checked in iTunes under the Tones library.
Yes, it is also listed under the Tones tab for my iPhone, but it is grayed out.
Yes, tones are selected under "sources" in General Preferences, along with everything else.
SyncTones was NOT selected under the Tones tab for my iPhone. I did so and it synced.
Thanks for your help!
Lois

How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them

How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over. Someone said all I had to do was copy them over and they would convert but I can't even get them to copy. Thanks.

Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
Basically, this is just POORLY written and POORLY tested software!

Is there a way to find the serial number in these files so that I can reinstall the full version?

I had to restore from backup to a new hard drive, and only have part of my Adobe Photoshop installation. Is there a way to find the serial number in these files so that I can reinstall the full version? I have only part of the documentation so this is the best way I see to get the full version back.

Hello brad,
you did purchase your product from these firms like Amazon, so you didn't get a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
Additionally you should have a look at Adobe's database, to see what's stored/saved about your accounts. Here you will find general infos about your Adobe Account.
On the other hand, if necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I for may part had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Hans-Günter

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

AI CS3 Plugin: How to get the file format that is selected in the "save as" dialog??

Hi,
Someone please help me in getting the file format that is selected in the "save as" dialog. I wanted to retrieve it in the string format.
I tried sAIDocument->GetDocumentFileFormat. But i'm unable to implement it correctly. Is there a better way or How do I implement this? Precisely, I wanna get the value as a string when the user selects "save as .pdf".

Do you really need to know the file type? What about just checking the bit depth?
var doc = activeDocument;
if (doc.bitsPerChannel != BitsPerChannelType.EIGHT) {//Not 8 bit
doc.bitsPerChannel = BitsPerChannelType.EIGHT;
//do your save etc
}else{
//Ignore

What is the easiest way to get the data from the mailmerge to form Pages files that can be saved separately?

Using Iwork 09 I have spent several hours setting up a mail merge from a spread sheet in Numbers to create receipts for my customers from a Pages template.
After the merge I am left with one long Pages document that will not save as separate files; one per customer, it will only save the whole document of several receipts.
What is the easiest way to get the data from the mailmerge to form Pages files that can be saved separately?
Many thanks in advance.
Richard

Mr. Clark,
You will probably be more pleased with the iWork apps when you begin to learn your way around. Until you learn such basic things as how to print only one page of a document, you will probably continue to be disappointed.
Does your Print dialog look like this:
Or like this:
If it looks like the first one, then you will want to click this expander control:
Regards,
Jerry

Forefox won't start in windows XP: I get the message that windows "cant' find the exe file" even when I click from the program file, rather than the shortcut.

Forefox won't start in windows XP: I get the message that windows "cant' find the exe file" even when I click from the program file, rather than the shortcut.

Delete the current Firefox shortcut on the desktop and create a new desktop shortcut via the right-click context menu on the Firefox.exe program (Send to > Desktop)

How to pause, stop, play a sound that is loaded from the other .swf file?

Pause and Resume external SWF sound files
I have this code that plays the sound through linkage. It reside in scene1.fla -> scene1.swf.
var mc:MovieClip = this.createEmptyMovieClip("mc",1);
var myLoop:Sound = new Sound(mc);
myLoop.attachSound("bg_sound");
myLoopVolume=0;
myLoop.setVolume(myLoopVolume);
mc.onEnterFrame = function () {
    if (fadeIn01==1) {
        _root.myLoop.setVolume(myLoopVolume);
        myLoopVolume=myLoopVolume+5;
        if (myLoopVolume>50) {
            fadeIn01=0;
    if (fadeOut01==1) {
        myLoop.setVolume(myLoopVolume);
        myLoopVolume=myLoopVolume-1;
        if (myLoopVolume<5) {
            _root.myLoop.setVolume(10);
           // _root.myLoop.stop("myLoop01");
            fadeOut01=0;
fadeIn01=1;
myLoop.start(0,999);
The problem goes like this. I want to pause the sound from playing in scene1.fla -> scene1.swf in anytime I want, through my main.fla -> main.swf that loads the scene1 movie. I got stuck.

you need to use the path from the timeline that contains the controlling code and myLoop. you can always use trace(this) on both timelines (the one containing the controlling code and the one containing myLoop) to determine the correct path.

"uses a file type that is blocked from opening in this version" error message when opening a *.doc file with Word already running

Several customers running different versions of Office 2011 (14.4.1-14.4.5) on OSX varying from 10.7.5 to 10.9.5, running on various kinds of hardware (iMac/MacBook Pro/MacBook Air) of various ages are having issues opening *.doc files if the Word is already open. The error message that gets displayed is, "XXXX.doc uses a file type that is blocked from opening in this version"
When the customer tries to open the same file via File-Open, she gets "The file is locked for editing. you can open the file as read-only".
When trying to do so, she gets "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters".
If Word gets Force-quit, the same document opens without any problems.
1. Repairing Disk permissions was ran several times. and the volume was found to be OK.
2. I have noticed that in this scenario either deleting the normal.dotm or com.microsoft.word.plist (~/Library/Preferences) sometimes resolves the issue, sometimes it doesn’t. There is no pattern to follow. All versions of Office are affected, the fully updated and the non-updated ones.
3. I have tried completely removing the suite using Office 2011 Uninstall.app and/or Remove Office 2011 Uninstaller.pkg, then going through customer's library and manually removing all the Office references.
4. None of these systems had Office 2008 in the past.
Any help will be greatly appreciated.

Reboot both the Mac and the server. Word opens .DOC files and Excel opens .XLS files. As you have found out by copying the files to the computer. It is the connection between the 2 computer that is causing the error.

I have an older PC with three i-tunes libraries on it that go with three different i-tunes accounts. The PC won't boot up and needs to be re-installed. Will I lose the three libraries? Is there a way to reverse sync the libraries from the i-pods after?

I have an older PC with three i-tunes libraries on it that go with three different i-tunes accounts. The PC won't boot up and needs to be re-installed. Will I lose the three libraries? Is there a way to reverse sync the libraries from the i-pods after?

It has always been very basic to always maintain a backup copy of your computer files/docs/pics/music/etc.
Just use your backup to put everything back. This is one of the many reason that backup are very basic.

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

Need how to get the data from the external file in eCatt

Hi ,
Could any body suggest how to get the values from the external file(Excel,CSV file,Text file) and pass it as varaiable in ecatt Test script.
Problem: Need to execute FK01-Vendor creation Transaction with multiple set of data .As per my understanding we could achive through Variants in Testdata set in eCatt .
But is there any way to store the data in excell file and get the data and pass it to FK01 Test scripts
Appreciate response on this

Hi
See the links they may be useful
check these link,
eCATT- An Introduction
/people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
Creating Test Scripts
/people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
eCATT Logs
/people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
eCATT Scripts Creation TCD Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
Creation of Test Data Container
/people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
eCATT Scripts Creation - SAPGUI Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
Integrating ECATT & MERCURY QTP Part -1
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
Using eCatt to Test Web Dynpro ABAP
/people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
and
-command reference
http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
http://prasadbabu.blogspot.com
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
http://www.erpgenie.com/ecatt/index.htm
hope this helps.
Reward points for useful Answers
Regards
Anji

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?
What do I need to do to bring the graphics and exhibits from the PDF file to the Word file?

Hi jackp52432917,
How was that PDF file created? Please see Will Adobe ExportPDF convert both text and form... | Adobe Community
It could be that the PDF file you're converting was created using a third-party application, and it doesn't contain all the information necessary to ensure a clean conversion. Have you had similar troubles converting other PDF files?
Best,
Sara

Creation in a file different that the file from the Panel Master-detail

Similar Messages

Maybe you are looking for