Creation of account # in chart of accounts

Hi ppl,
when i was trying to assign an account # to the GL clearing differences account .... Initially its giving a message
" Account ####### not created in chart of accounts XXXX"
and when i press the enter one more time its accepting and i could save the data as well.
Does that mean that corresponding a/c number is created in the char of accounts?
Pls help
Thanks!

Hello Sri,
The message you got only a warning message, when you hit the enter the system will accept the fileds.
Corresponding GL account will not create.
You can check the same with T.Code: FSP0
Regards
Ramakrishna.A

Similar Messages

Error occurs, BAPI_ACC_DOCUMENT_CHECK for creation of accounting document

Hi Experts,
I am creating accounting document using BAPI_ACC_DOCUMENT_CHECK Bapi F.M. Profit segment number is mandatory ( T.code KEDR) for G/L account 411103 .when i am using this G/L account for creation of accounting document, occurs below error message.
1.Field Prof. Segmt is required field for G/L account 0495 411103
2. Account 411103 requires an assignment to a CO Object.
Please let me know how i can resolve this problem using with BAPI.
Thanks
Jaya Reddy

The BAPI you have mentioned is used to check whether a posting to accounting is possible. You can use the Bapi "BAPI_ACC_DOCUMENT_POST" for posting accounting documents. Depending on the GL account configuration you have to pass PROFIT CENTER / COST CENTER to the BAPI.
Regards
vinod

Configure the automatic creation of accounting document while billing

Hi,
Could you telme where to find the customization where you configure such that
triggering of automatic creation of accounting document takes place during billing itself.
Regards
anil.

Hi Anil,
In VOFA Document type in General contrlo is related to Accounting Document.If it is blank the system Automatically pics RV as accounting Document.
If posting Block is Ticked then Automatic posting will not happens.
You need to pass to Accounting in VF02 and release for accounting(Green Flag)
Regards,
Reddyy

Deactivate manual PR creation with account assignment "N"

Hi experts,
How to Deactivate the manual PR creation with account assignment "N" in ME51N ,as these PR with account assignment "N" is to be made from CJ20N Tcode.
Kindly help..
Thanks

Hi,
The above proposed solution is not working.Kindly let me know if can be done through any development.If so,please tell me the USER EXIT for this requirement..
There is no way through configuration changes to block the manual creation of PR for account assignment "N"
Thanks
Edited by: ARITRA MUKHERJEE on Sep 4, 2010 10:13 AM

Creation Of Account groups and Ledgers under chart of a/c's

Hi all,
I m fresh SAP candidate... Just finished one cycle of practice...next cycle i want to create ledger by own... is this possible to create other than coping the chart of a/c's... what abt the tables...is there any seprate methods to copy tables...???
pls help me

Hi Vani
It is very very basic thing which you are asking, it shows that your teacher has not taught you basic things or you have not concentrated on the basic things, just go to your teacher and ask him if he is unable to answer your question then this forum experts will defenetily help you.
This forum is not for to clear very very basic things. Do not think otherwise learn properly in proper place then you will become expert in this forum.
Cheers

Problem creation of accounting document impossible

Dear Gurus,
I created a new Material Type in reference to "DIEN" Material Type.
I have created a Sales Order -> Delivery -> Invoice flow (yes the delivery isn't useful but needed for some flat file sending...).
After the creation of the Invoice, the Accounting document won't create itself.
I get the message : KE 348 described here below
Of course, no CCR exists but it's quite normal since we are on a Service Flow.
I check my customizing of the CO module, affectation of the Valorisation to Material Type and all is fine too.
Any ideas anyone please??
Thx in advance for your kind help
Xanticles
No valuation segment exists in the material master record for product 551
Message no. KE 348
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line
    item by looking for a product cost estimate for product "551" using the
    plan period indicator.
To do this, the system has to read the valuation segment ("MBEW") of the
    material master. This segment does not exist in valuation area NISL.
Display material, View: Costing
The system tried to read the product cost estimate according to costing
    costing key Z01 as defined in the CO-PA Customizing settings.

Your PA is configured to insist (error msg) on a cost estimate. You either need to create a cost estimate for the service you are providing, or configure PA such that it will not generate an error when it doesn't find a cost estimate.

Stop the automatic creation of Accounting Docs on MIGO

Hi,
We have an integration need where Goods Issues will be done against production orders. During this process an accounting document will be created for each material document created through MIGO. Each of these material document will in turn create an Accounting Document. The estimated volume of Accounting document transactions that will be created with the current design are adding up close to 25 million a year. Such a high number of accounting document is not a business need ( Business is OK with Accounting Documents getting created at a summarized level ).
With such a high number of accounting documents in a year we performance implications on the finance tables..
We are looking at ways where the accounting document doesn't get created immediately on creation of a material document but at a later point in time through a batch job run of a custom program.
I would like to know if this is possible technically and if anyone has had any prior experience in doing it or knows of ways this can be done.
Thanks in advance.
Arunava

Hi Anil,
In VOFA Document type in General contrlo is related to Accounting Document.If it is blank the system Automatically pics RV as accounting Document.
If posting Block is Ticked then Automatic posting will not happens.
You need to pass to Accounting in VF02 and release for accounting(Green Flag)
Regards,
Reddyy

Sending Email notification on creation of account

Hi,
Our requirement is to send an email notification when a user account gets created. I have tried the following in User Form of proxy admin
<Field name='viewOptions.Process'>
<Expansion>
    <block trace='true'>
      <switch>
        <ref>feedOp</ref>
        <case>
          <s>create</s>
          <s>Send Mail</s>
        </case>
      </switch>
    </block>
</Expansion>
</Field>but it doesn't send any notification. While in Tomcat it shows the value as below where Send Mail is the name of workflow .
<switch>
<ref>feedOp</ref>Resolved feedOp to create
--> create
<case>
    <s>create</s> --> create
    <s>Send Mail</s> --> Send Mail
</case> --> Send Mail
</switch> --> Send MailEven i have tried to call this workflow from Process rule of synchronization policy but in that case it only sends mail and the user doen't get crreated.
Please suggest what to do.
Thanks

Hi,
Thanks for ur reply. I have tried the configure taks method but don't u think that now it will send notification for ach and every account created in sim irrespective of the process used for account creation(ActiveSync or else) and resource because i need to send notification only when the user in sim is being created using activesync on Flat File Activesync resource.
Thats why please suggest something else or tell me how it can be made to resource specific in configure tasks as i don't think it is a good approach to modify the default create user workflow.
Thanks
Waiting for reply.

Conditional creation of accounts in a resource - required field not working

Hi,
We want to conditionally create account objects in a resource, based upon whether or not the users account has a non-empty value for a particular atttribute.
To me this seems to be what the 'required' attribute on a field is for, in theory I should be able to tag a field as required, and then if an account dosn't have a value for the attribute, it won't be created on the resource.
The Help, from IDM6.0, says the following:
Required -- If this attribute is required to create an account on the resource,
select the option. This selection applies only when creating accounts.
When I try to do this though, it fails, it goes ahead and creates the account within the resource anyway.
So what did I do wrong, or am I misunderstanding the meaning of this.
To test this, I created 2 XML Resources, Res1, and Res2.
I specified that Res1 had accountId, and email as attributes.
I specified that Res2 had accountId, and email as attributes, but ticked email as required.
I made accountId the idntity template in both cases.
I then created 2 test accounts test1, and test2, but only gave an email address to test1, but assigned both resources to both accounts.
Both resource xml files had both users listed.
For those who care more, the reason we want to do this is that we are running an LDAP with a sendmail tree, and want to populate this via IDM, all our users have email accounts, but not all have email aliases. Therefore, we only need some of the users to have entries that look like this.
sendmailMTAKey=fred.bloggs, ou=sendmail, o=anu.edu.au
sendmailMTAHost=anu.edu.au
sendmailMTAAliasValue=u1234567
sendmailMTAKey=fred.bloggs
sendmailMTAAliasGrouping=aliases
objectClass=sendmailMTA
objectClass=sendmailMTAAlias
objectClass=sendmailMTAAliasObject
objectClass=top
So I guess the question is really 2 things, what am I doing wrong with conditional account creation? Is this the right way to create these entries in the LDAP sendmail tree?

Hi again,
For those who care, I've got a resolution to the specific problem I mentioned in the above post, even if no answer to the general question of conditionally adding accounts on resources.
In this specific case, I had been given a poor description of the requirements of the sendmail schema. It turned out on closer investigation that a single ldap record could hold all the information needed. It seems the sendmai schema had been implemented inefficiently locally, before we looked to run it through IDM.

Blocking vendor for PO creation if Accounting view is not maintained.

Hi ALl,
Is it possible to restrict RFQ or PO creation against vendor if accounting view is not maintained by account dept.
I dont want to block it in MK06 or XK06 or in source list.
Is there any user exit for this?
Pls guide.
Regards.
Edited by: sapsarang on Aug 5, 2011 10:07 AM

Hi,
Use BAdi "ME_PROCESS_PO_CUST" and write the code under Interface "PROCESS_HEADER".
Following is the sample code for the same.
data t_lifnr type lfb1-lifnr.
if w_lifnr is not initial and wa_hdr-bukrs is not initial.
select single lifnr from lfb1 into t_lifnr where lifnr = w_lifnr
                             and bukrs = wa_hdr-bukrs.
   if sy-subrc ne 0.
     MESSAGE e025(zm01) WITH w_lifnr wa_hdr-bukrs.
   endif.
Here create a message as ZM01025 (In TCode SE91) as "Vendor has not been maintained for Co. Code &."

Retainer account creation & GL account creation

hi all,
I m creating new GL for ratainer account but the Gl is not getting created becos of retainer account not yet created ...
the error is while creating new GL
No PVSCAL statement account type is defined in chart of accounts VSCA
i m very well know this error is related to retainer account ...
Please help me in this issue.....
how create new GL
regards
kalai

hi,
check the tax Caluculation procedure.In the img you just assign the Country tax caluculation procedure..try ..

Members only area setup to query existing database before allowing creation of account

I followed this walkthrough:
Walkthrough: Creating a Web Site with Membership and User Login
It was very helpful in creating the members login area.
My next step is to link it to an existing database, so it will make sure the person who is trying to create an account is in that database. Is this easily done, or not possible?
I also need to know what I should do with the database. Should it be uploaded onto the webserver? It is currently kept in Microsoft Access, but I believe I need to put it into SQL? I apologize, I am not very knowledgeable about databases and how they work.
Any help would be greatly appreciated!

http://msdn.microsoft.com/en-us/library/ms173463.aspx
If this is an ACCESS database you will be better of asking this question om access forum.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Error while creation of Accounting view in background

Hi Experts,
I am creating the Materials using the Function MATERIAL_MAINTAIN_DARK in my program.
I am passing the pstat as appropriate for the views to be created.
Now, my problem comes When i am creating a Plant view and dont require an Accounting view.
Even if I dont pass the PSTAT for the Accounting view, it gives me an exit message saying 'MBEW-BKLAS is defined as a required field.'.
Please help me solve the issue.
Any helpful answer will surely be rewarded.
Thanks in Advance.
Regards,
Himanshu

Hi,
Please follow the below steps.
Creating the Classification View using the Function module 'BAPI_OBJCL_CREATE'.
Check the Class Type and Class Number which you are passing.
Generally it will be Class type - 001 (Material Class) and Number will be ENGINEERING.
It depends.
But, what you can do is, Check material which has classification data filled.
And just use the same class Type and Class Number Details.
Try this way.It should work.
To know the Available Class Types refer to table TCLA.
Please let me know, if you want further help.
Thanks & Regards,
Vamsi.

Invoice cancellation leading to creation of accounting document with partial items

Hi All,
I faced an issue wherein there is an invoice created for items delivered (tangible goods as per the delivery document ) and services rendered ( intangible items).
After doing an RTA for the invoice , when I cancel this invoice , the cancelled invoice document is created. But , the accounting document created wrt the cancelled document has only the items for the delivered items and not the services rendered. Why is this discrepancy in the accounting document when the complete billing document (having both delivered items and services ) is cancelled ?
Regards
Samarth Gupta

Hi,
The original accounting document did have all the items as in the billing document. Even the cancellation invoice document created after cancelling the billing document also had all the line items. Surprisingly, the accounting document created wrt the cancelled invoice document did have only the delivery items(tangible goods) and not the services rendered.
Please revert with more inputs.

Creation of accounting docs

I am having trouble to create accounting documents for a billing document in VF02. Can anybody let me know what are the fields to be given to post an accounting document along with the path.
Thanks,
Mary.

Dear,
Visit below link, problem is solved..
Re: Accouting FI document is not generating at sale billing (VF01)
Regards,
Chintan Joshi

Creation of account # in chart of accounts

Similar Messages

Maybe you are looking for