Creation of asst -- Error - Message no. AA198

hi,
I am trying to create a asset. But i am getting the error as "The multi-level method of phase N1 in depreciation key ZAPR has not been correctly maintained for acquisition year 2009." and "Correct the multi-level method of depreciation key XXXX". Can anybody suggest how to rectify this error? Thanks.
Regards,
S.Sumana.

Hi Sumana,
First set your COD with OAPL.
Then go to AFAMA and select your dep key
And double click on assignment of calculation methods
Here check, which multilevel method is assigned to your dep key
And double click on multi level method field (you will be derected to multi level method config screen)
Double click on levels
Here check what you have given for the fields acq Year, years, periods
Normally they should be 9999, 999, 12.
Hope this may help you
Thanks in advance
Srinu

Similar Messages

_Media creation failed with error message: 'The system cannot find the path specified.'

SCCM 2012 R2 CU2 all latest patches.
I attempted to create a task sequence media and I get the error in the screenshot below. I have deleted and recreated the operating system,boot image, driver pack and task sequence. The usb media is 16GB and the task sequence size is 3004MB.
I only see the error in CreateTSMedia.log as below. How do you fix this?
<![LOG[Beginning media generation]LOG]!><time="12:37:44.522+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:418">
<![LOG[Partition activated]LOG]!><time="12:37:47.720+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="diskvolume.cpp:849">
<![LOG[Finished formatting volume F:\]LOG]!><time="12:37:55.723+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:772">
<![LOG[Assigning staging directory to F:\]LOG]!><time="12:37:55.724+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:1122">
<![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:476">
<![LOG[ Beginning pass to compute volume layout]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:479">
<![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:487">
<![LOG[Setting up new volume]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1297">
<![LOG[WriteVolumeId()]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1038">
<![LOG[Failed to create media (0x80070003)]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="3" thread="4668" file="createtsmedia.cpp:345">
<![LOG[CreateTsMedia failed with error 0x80070003, details='']LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="createtsmedia.cpp:355">
<![LOG[MediaGenerator::~MediaGenerator()]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:396">
<![LOG[Media creation process that was started from Admin Console completed.
]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4772" file="createmedia.cpp:1065">
<![LOG[CreateMedia.exe finished with error code 80070003]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="2" thread="4772" file="createmedia.cpp:1123">

Hi,
Error code 0x80070003 = "The system cannot find the path specified."
Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error message "SE 518 No account assignment exists for service li ne 000000

Hi All,
Customer is using SRM 7.0 Self-Service procurement
Shopping cart created with multiple service items, once it approved. We get the Error message "SE 518 No account assignment exists for service li ne 0000000000" in Shopping cart Monitor. Could you please help me here why this issue happening.
FYI:- Same user created another shopping cart with same data, this error not occurred. This error is happening a while not regular for the same item ordering.
Could you please help me on this what may be issue here?
Appreciated your help in Advanced.
Cheers
Raj

Hi Raj,
Have you already tried the notes below?
499626     FAQ: BAPIs in the service procurement
1472036     Limit PO with account assignment can not be transferred
1140132     Error SE 518 when creating purchase order with contract
1557395     SE 518 error message for service items during PO creation
1226132     SE518 Error message from back-end system for service item
Best regards,
Christian Zeuch

Error message while creating shopping cart

Hi
I am facing issues in SC creation. Getting error messages u2018purchasing group for follow on document missing & u2018purchasing organization for follow on document missingu2019.
Is it something to with RFC or authorizations
arjman

Hello,
You can try to set an external breakpoint in FM BBP_PD_MSG_ADD and check why system is throwing this message.
Checking the call stack you can see which setting is missing in your system.
Regards
Ricardo

ComponentOne error message

I recently downloaded the Blackberry desktop manager (PC version) for my Blackberry Curve 8330. It seems to work properly except for the error message from ComponentOne indicating “This dialog box will not be shown if you recompile the program using a licensed version of this product.” A response from ComponentOne technical support follows: “This message usually comes up when the application using our control has not been packaged/referenced correctly. We have received couple of such cases with the desktop software recently...I would recommend you to contact BlackBerry/RIM support for this one.” I have removed and reinstalled the software. Suggestions?

Hi Raj,
Have you already tried the notes below?
499626     FAQ: BAPIs in the service procurement
1472036     Limit PO with account assignment can not be transferred
1140132     Error SE 518 when creating purchase order with contract
1557395     SE 518 error message for service items during PO creation
1226132     SE518 Error message from back-end system for service item
Best regards,
Christian Zeuch

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

Error message during TO creation back ground

Hi All,
We have configred the movemet type 309 and 321 with auto matic TO creation, after that we have schuduled a job (with program RLAUTA11)to create TO automatically , but for some of the posting changes TO es are creating automatically, but some of the posting changes TO are not creating and in the job log we found the error message"No quants exist for posting changes" message no : L3 094.
Could any one please kindly show the resolution for this issue.
Thanks & Regards,
Murali.

Short Text
No quants exist for posting changes
Diagnosis
No quants requiring a posting change were found.
Procedure
Check your entries.
If memory serves, there is some called "quant" that is used in the TO creation. Obviously, with the quant that you have specified for that TO, nothing can be done. This is not exactly an ABAP question, you might need to ask your MM/WM consultant.
Additionally, you may use "where used" feature in SE91 to find where in the programs this message occurs and what validations happen before that.

Error Message WY 030 . Vendor master creation

Hi all
The Error Messgae *WY 030 :Purchasing organization &1 assigned to company code &2, not &3*:+ Need to activate as a ERROR MESSAGE.+
During Vendor creation ,if the wrong purchase organisation is selected, system is allowing to create the vendor master.
Even though ,I have done the Setting in the following , the error message is not reflectiog
1. Message Control for Vendor Master Data
2.T.code : OBMSG
3.T.code : OBA5
Thanks & Regards
DP

strange.
in my system WY 030 message is this: Entry & in table & does not exist
what do you call a wrong purchasing organisation?
I guess you have several organisations in the system.
lets make an example:
purchasing PORG1 is assigned to company code CC1
purchasing PORG2 is assigned to company code CC2
purchasing PORG3 is assigned to company code CC3
and I guess
you want prevent a user to create a vendor master with company code CC1 and purchasing org PORG2
You just cannot do this.
All company codes are valid and all purchasing orgs are valid.
It is just to combination that would logically not make sense while creating.
but if this vendor is used in all companies, then you have 3 CC views: for CC1, CC2 and CC3,
and you have 3 purchasing views for PORG1, PORG2 and PORG3
would you still say that a vendor master with CC1 must not have PORG2 ?

Error message display for PO creation with reference to internal orders

Sir,
While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message when Budget is exceeded.
But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
Regards,
Srinivasa Murthy

Hi Anupam,
The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
This error comes during PO creation Process and PO can not be saved. This error message display is correct.
Item 001 Order 600643 budget exceeded
Message no. BP604
Diagnosis
In document item 001 Order 600643, budget for fiscal year 2009 was exceeded by 99,960,000.00 INR.
But my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
Regards,
Srinivasa Murthy

Error in IDOC creation of Inbound Delivery (VL31N) with Error Message Number VL561

H,
I'm getting an error message when generating a test IDOC of Message type DESADV and IDOC type DELVRY03 to create Inbound delivery with reference to a standard purchase order.
Essential transfer parameters are missing in record: PO Number and Item
Could you one help me out in solving this.
Thanks,
Raj

Hi ,
Goto SM13 .
Find the terminations based on user and creation date.
Get the same analysed by ur ABAP team.
Also check the confirmations in PO at Item level.
Regards
Ramesh Ch

Not able to display error message in PR creation.

HI Experts,
In PR creation process i am not able to display error message.
BADI: ME_PROCESS_REQ_CUST
method : PROCESS_ACCOUNT, PROCESS_ITEM
I have used Include mm_messages_mac for handling error .
MESSAGE e112(XXX) WITH XX-XX. this is my error message.
even tried this also mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
Please provide solution for this.
Regards,
Jayant

Hi,
In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
i am using
message EXXX(XXX).
regards,
Jayant.

Custom Error Messages in Sourcing Cockpit do not prevent PO creation

Hi forum gurus,
We are implementing SRM 5.5 SP 9 in extended classic mode. We have implemented sourcing cockpit too.
We have coded an error message in the 'BBP_ITEM_CHECK' BADI for the sourcing cockpit and it appears correctly in the sourcing cockpit when necessary.
However, the system still allows the PO to be created, despite the error message being visible prior to clicking on the 'Create Purchase Order' button.
Any ideas? I will create a customer message to SAP with this anyway, but hoped someone may know for certain how to resolve it!
Thanks,
Nick

Hi,
Use the BADi "BBP_DOC_CHECK_BADI".
See the foll thread:
authority check on Creation of Purchase order usin badi BBP_ITEM_CHECK_BADI
BR,
Disha.
Pls reward full points for useful answers.

Creation of work center CR01 (error message in last page)

Hi
During creation of work center .After all the configuration being done ,in the last page the error message displayed is (ACTIVITY SET CAN NOT BE ALLOCATED TO 2009).
Some of the major setting done in the last page is
This is Costing Lab
1) work Center
2)Activity description (Like set up, Machine and Labouring)
3)Selection of activity type
4)Preferred Unit
Per
After this when i save the error message is displayed mentioned above (Message number is KL008)
Please help ....!!!!!
Thanks in advance
Rupesh Jha

Dear Rupesh,
1. Please enter the CCtr categories value as "*" in the basic data tab.
1)in KL02 for this particular activity type give as *
2. Enter ATyp category field value ar "1" in the basic data tab.
2) in the field A type mainatin -1
3. Actl Acty Type Cat field value as "As in planning".
in this field also mainatin as 1
YOU MUST SPECIFY A COST ELEMENT FOR ACTIVITY CAT 1
first creat a cost element in KA01 (pramairy) & in KA06 (secondry)
then asiign in KL02 for the required activity types
Regards
kumar

Error Message While creation of SC No commitment item entered in item

Hi,
I am creating SC while creation following error message is appearing :-
No commitment item entered in item 1 10 6534
Where 10   :Comp code
           6534 : CC
Is there any thing commitment related missing in SRM ?
Thanks,
Sachin

Hi,
run TA FS01
-> G/L Account        <enter your G/L account>
     Company Code    <enter the company code - i think its 6534 in your example>
     -> Tab "Create/bank/interest"
         -> "COMMITMENT ITEM" <======
I hope that helps!
Best regards,
Georg

Creating Error message during creation of SC using create limit item option

Hi,
I am using option "create limit item" option to create a service SC, now i need to set an Error message if the value in the "value limit" field is lower than the value in the "expected value" field during the creation of sc and i should not be able to order such cart. Currently there is no message displayed and i can create a SC with the lower value in the value limit field.
Please suggest.
Regards
GGL

Hi. Try BBP_DOC_CHECK_BADI to issue a custom error.
Regards,
Dave.

Creation of asst -- Error - Message no. AA198

Similar Messages

Maybe you are looking for